Lev V. Ivanov
Lev V. Ivanov has a total of 5 co-authors. Here are the top co-authors by number of shared publications:
- A.V. Vasilenok
ITMO University 197101 Saint Petersburg Russian Federation
2 shared publications - Aleksandr Yu. Baranov
ITMO Univercity
2 shared publications - Alexey V. Soloviev
Physical-Technical Institute, Petrozavodsk State University, 33, Lenina pr., 185910 Petrozavodsk, Russia
1 shared publication - Elena S. Seredenko
ITMO University
1 shared publication - Ernest G. Rumyantcev
Volga State University of Water Transport, Nizhny Novgorod, Russia
1 shared publication
Latest Publications
- 5 September 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 280
New flash evaporation algorithm for non-equilibrium LNG weathering modelling
- 5 September 2025
- Published by Elsevier in Applied Thermal Engineering
- Vol. 280
New flash evaporation algorithm for non-equilibrium LNG weathering modelling
- Open Access
- 1 June 2023
- Published by ITMO University in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
- Vol. 23 (3) , 659
Method of type-C liquified natural gas tank modeling based on volume optimization for future "milk-run" exploitation
Common practice methods of tank design for transportation of liquefied natural gas don’t take into account the specifics of the gas carriers operation under the condition of partial filling of cryogenic tanks. A new method for designing of type-C tank is proposed. Method is based on solving the problem of increasing the volume of transported liquefied natural gas by small-scale inland carriers. The method is based on usage of a number of limiting parameters: minimal allowable ventless operation time, allowable values of the ship’s draft, and the actual duration of voyages between neighboring consumers. The method allows optimizing type, shape, wall thickness, and heat insulation thickness of cryogenic tank. The proposed method is aimed at enlargement of usage of the ship’s hull dimensions. This is achieved by changing the diameter, the distance between centers of the bi-lobe tank, the thickness of the insulation, and the maximum allowable working pressure. An increase in the volume of the tank is achieved by coordination such parameters as the maximum allowable draft of the vessel, the minimum time of ventless storage, and the time of ventless operation under partial filling conditions. The calculation of the ventless operation time is determined by the operating conditions of type-C tanks. The calculation of the heat ingress into the tank takes into account the contact area of liquefied gas and its vapors with the metal wall of the tank. The calculations do not take into account the assumption of thermal equilibrium between the liquid and vapor fractions, which leads to the need to take into account heat transfer from vapor to liquid. The implementation of the method is shown on the example of the modeling of the two-way river-sea type vessel. It is shown that optimization of tank parameters in accordance with proposed criteria can lead to an increase in the volume of transported natural gas by more than 4 %. The method can be used in the development of new and modernization of existing vessel projects to transportation of liquefied natural gas operating in water basins of Lena and Yenisei rivers in the East Siberian region. The described method can also be used in the design of road and rail tanks as well as small- scale bullet tanks for liquefied natural gas.
- 1 June 2023
- Published by ITMO University in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
- Vol. 23 (3) , 659
Open AccessMethod of type-C liquified natural gas tank modeling based on volume optimization for future "milk-run" exploitation
Common practice methods of tank design for transportation of liquefied natural gas don’t take into account the specifics of the gas carriers operation under the condition of partial filling of cryogenic tanks. A new method for designing of type-C tank is proposed. Method is based on solving the problem of increasing the volume of transported liquefied natural gas by small-scale inland carriers. The method is based on usage of a number of limiting parameters: minimal allowable ventless operation time, allowable values of the ship’s draft, and the actual duration of voyages between neighboring consumers. The method allows optimizing type, shape, wall thickness, and heat insulation thickness of cryogenic tank. The proposed method is aimed at enlargement of usage of the ship’s hull dimensions. This is achieved by changing the diameter, the distance between centers of the bi-lobe tank, the thickness of the insulation, and the maximum allowable working pressure. An increase in the volume of the tank is achieved by coordination such parameters as the maximum allowable draft of the vessel, the minimum time of ventless storage, and the time of ventless operation under partial filling conditions. The calculation of the ventless operation time is determined by the operating conditions of type-C tanks. The calculation of the heat ingress into the tank takes into account the contact area of liquefied gas and its vapors with the metal wall of the tank. The calculations do not take into account the assumption of thermal equilibrium between the liquid and vapor fractions, which leads to the need to take into account heat transfer from vapor to liquid. The implementation of the method is shown on the example of the modeling of the two-way river-sea type vessel. It is shown that optimization of tank parameters in accordance with proposed criteria can lead to an increase in the volume of transported natural gas by more than 4 %. The method can be used in the development of new and modernization of existing vessel projects to transportation of liquefied natural gas operating in water basins of Lena and Yenisei rivers in the East Siberian region. The described method can also be used in the design of road and rail tanks as well as small- scale bullet tanks for liquefied natural gas.
- Open Access
- 17 February 2023
- Published by ECO-Vector LLC in Refrigeration Technology
- Vol. 111 (3) , 141-149
The Problem of Utilization of Liquefied Natural Gas Vapor at Large-scale LNG Plants
The liquefied natural gas (LNG) is stored under low overpressure in a saturated state in large-capacity tanks with multilayer thermal insulation. Owing to the input of heat from the environment through thermal insulation, LNG is continuously evaporated. Since natural gas is a multicomponent mixture, LNG vapors are enriched with its low-boiling components, then the supply of heat from the environment reduces the amount of liquid in the reservoir and changes its chemical composition. Similar phenomena occur during LNG transportation. The present paper deals with the problem of LNG vapor utilization during its storage and transportation. Information is presented on the causes of the LNG vapor formation (boil-off gas) and methods for its disposal during storage and transportation to consumers. A numerical experiment was performed based on the data of LNG storage in large-capacity storage facilities at the Yamal LNG plant. The technique consists of the estimation of material flows toward the system of accumulation and extradition of LNG. The results show that the vapor flow generated from the inflow of new LNG portions into the storage significantly exceeds that generated from the heat supply from the environment.
- 17 February 2023
- Published by ECO-Vector LLC in Refrigeration Technology
- Vol. 111 (3) , 141-149
Open AccessThe Problem of Utilization of Liquefied Natural Gas Vapor at Large-scale LNG Plants
The liquefied natural gas (LNG) is stored under low overpressure in a saturated state in large-capacity tanks with multilayer thermal insulation. Owing to the input of heat from the environment through thermal insulation, LNG is continuously evaporated. Since natural gas is a multicomponent mixture, LNG vapors are enriched with its low-boiling components, then the supply of heat from the environment reduces the amount of liquid in the reservoir and changes its chemical composition. Similar phenomena occur during LNG transportation. The present paper deals with the problem of LNG vapor utilization during its storage and transportation. Information is presented on the causes of the LNG vapor formation (boil-off gas) and methods for its disposal during storage and transportation to consumers. A numerical experiment was performed based on the data of LNG storage in large-capacity storage facilities at the Yamal LNG plant. The technique consists of the estimation of material flows toward the system of accumulation and extradition of LNG. The results show that the vapor flow generated from the inflow of new LNG portions into the storage significantly exceeds that generated from the heat supply from the environment.
- Open Access
- 23 March 2021
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 66,p. 99-107
Prospects and problems of using liquefied natural gas as fuel on river ships in the northern steaming line of Russia
В статье рассматриваются перспективы модернизации судов, эксплуатируемых в акваториях магистральных сибирских рек, под использование сжиженного природного газа (СПГ) как основного типа топлива, а также проблемы, связанные с их адаптацией. СПГ является дешевым, энергетически эффективным и более экологически чистым аналогом традиционного дизельного топлива (ДТ). Унификация проектов адаптации распространенных типов главных двигателей судов из северных пароходств позволит значительно снизить эксплуатационные затраты. Проблемы модернизации связаны с хранилищем запаса топлива на судах. Более низкая плотность СПГ по сравнению с ДТ, а также необходимость использования криогенного топливного танка, снижает автономность эксплуатации судна на СПГ. Выполненный в статье анализ показал, что при модернизации автономность плавания по запасам топлива может снизиться в два раза.
- 23 March 2021
- Published by Volga State University of Water Transport in Russian Journal of Water Transport
- No. 66,p. 99-107
Open AccessProspects and problems of using liquefied natural gas as fuel on river ships in the northern steaming line of Russia
В статье рассматриваются перспективы модернизации судов, эксплуатируемых в акваториях магистральных сибирских рек, под использование сжиженного природного газа (СПГ) как основного типа топлива, а также проблемы, связанные с их адаптацией. СПГ является дешевым, энергетически эффективным и более экологически чистым аналогом традиционного дизельного топлива (ДТ). Унификация проектов адаптации распространенных типов главных двигателей судов из северных пароходств позволит значительно снизить эксплуатационные затраты. Проблемы модернизации связаны с хранилищем запаса топлива на судах. Более низкая плотность СПГ по сравнению с ДТ, а также необходимость использования криогенного топливного танка, снижает автономность эксплуатации судна на СПГ. Выполненный в статье анализ показал, что при модернизации автономность плавания по запасам топлива может снизиться в два раза.