Aleksandr Yu. Baranov
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Aleksandr Yu. Baranov has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Vladimir A. Baranov
Research and production enterprise "KRION
4 shared publications - A.V. Vasilenok
ITMO University 197101 Saint Petersburg Russian Federation
3 shared publications - Ekaterina V. Sokolova
ITMO Univercity
3 shared publications - Ivan A. Baranov
Research and production enterprise "KRION
3 shared publications - Yu. A. Kravchenko
National Research University ITMO; LLC "NPP "KRION
3 shared publications - Anastasia Ikonnikova
National Research University ITMO; LLC "NPP "KRION
2 shared publications
Latest Publications
- Open Access
- 1 April 2026
- Published by Technical University of Moldova
- No. 2,p. 124-138
Formation of Temperature Distribution in a Regenerative Heat Exchanger During the Initial Cooling Period of a Cryogenic Reduction Unit of Main Natural Gas
This article examines the startup period of a natural gas pipeline cryogenic reduction unit (CRU) within a gas distribution station (GDS). The objective of the study is to determine the temperature distribution within a regenerative heat exchanger (RHE) during the CRU's initial cooling stage. This objective was achieved through an analysis of primary cooling methods for the regenerator packing and through numerical experiments to determine the optimal filtration rate and switching time. The study involved a CRU operating on a simple throttling cycle and using RHE. The numerical experiments yielded the optimal filtration rate and blast duration for the natural gas pipeline. Software was developed using a mathematical model of the CRU and implemented in the Python programming language. The most important result is the shape of the temperature distribution curve across the packing bed height during the initial startup of the CRU. Based on the research conducted, it has been shown that increasing the steady-state operating time of the CRU is accompanied by an expansion of the zone of active heat transfer to the upper portion of the packed heat exchanger. The significance of these results lies in the development of a methodology for studying the formation and height distribution of temperatures within the CRU's regenerative heat exchanger. This allows for an analysis of its operating efficiency during the initial cooling period and paves the way for further research under conditions of daily uneven gas consumption in the city network
- 1 April 2026
- Published by Technical University of Moldova
- No. 2,p. 124-138
Open AccessFormation of Temperature Distribution in a Regenerative Heat Exchanger During the Initial Cooling Period of a Cryogenic Reduction Unit of Main Natural Gas
This article examines the startup period of a natural gas pipeline cryogenic reduction unit (CRU) within a gas distribution station (GDS). The objective of the study is to determine the temperature distribution within a regenerative heat exchanger (RHE) during the CRU's initial cooling stage. This objective was achieved through an analysis of primary cooling methods for the regenerator packing and through numerical experiments to determine the optimal filtration rate and switching time. The study involved a CRU operating on a simple throttling cycle and using RHE. The numerical experiments yielded the optimal filtration rate and blast duration for the natural gas pipeline. Software was developed using a mathematical model of the CRU and implemented in the Python programming language. The most important result is the shape of the temperature distribution curve across the packing bed height during the initial startup of the CRU. Based on the research conducted, it has been shown that increasing the steady-state operating time of the CRU is accompanied by an expansion of the zone of active heat transfer to the upper portion of the packed heat exchanger. The significance of these results lies in the development of a methodology for studying the formation and height distribution of temperatures within the CRU's regenerative heat exchanger. This allows for an analysis of its operating efficiency during the initial cooling period and paves the way for further research under conditions of daily uneven gas consumption in the city network
- Open Access
- 29 November 2025
- Published by ECO-Vector LLC in Refrigeration Technology
- Vol. 114 (1) , 5-16
Evolution of liquid nitrogen supply modules in cooling systems for cryotherapy units
For over 25 years now, single cryotherapy units (cryosaunas) have been produced and used in clinical practice in the Russian Federation. Cryotherapy is a type of physiotherapy based on short-term contact of the entire surface of the human body's skin with a gaseous medium cooled to cryogenic temperatures. Reducing skin temperature through intensive heat transfer to the cryogenic gas (coolant) stimulates the skin's cold receptors and creates conditions for the treatment of some socially significant diseases, including rheumatoid arthritis, psoriasis, asthma, allergy, etc. The main operational issue with such units is that the patient's skin releases a large amount of accumulated heat in contact with cryogenic gas. The most effective method to remove this heat flow is to use liquid nitrogen as a heat-receptive medium (cryogen). The world's first cryotherapy unit based on liquid nitrogen was used to discover and prove the effectiveness of cryotherapy. Then, the effectiveness of nitrogen refrigeration systems was questioned and they were replaced by compression refrigeration systems in some countries. In Russia, nitrogen refrigeration technology was developed and adapted to the design of single cryotherapy units. Thus, this cryosauna offers the highest cryotherapy efficacy with the lowest consumption of liquid nitrogen. This work aimed to analyze liquid nitrogen supply units in the cryosauna refrigeration system and identify the most effective technology. It was found that nitrogen refrigeration systems allow to remove a greater amount of heat with the lowest energy consumption. Moreover, no additional refrigeration equipment is required. Contact nitrogen refrigeration systems have lower thermal inertia and higher efficiency of liquid cryogen. It is proposed to use of an alternative cryogen in multi-seat cryotherapy units. Contact nitrogen refrigeration systems in single cryotherapy units is the most reasonable option in terms of power and technology.
- 29 November 2025
- Published by ECO-Vector LLC in Refrigeration Technology
- Vol. 114 (1) , 5-16
Open AccessEvolution of liquid nitrogen supply modules in cooling systems for cryotherapy units
For over 25 years now, single cryotherapy units (cryosaunas) have been produced and used in clinical practice in the Russian Federation. Cryotherapy is a type of physiotherapy based on short-term contact of the entire surface of the human body's skin with a gaseous medium cooled to cryogenic temperatures. Reducing skin temperature through intensive heat transfer to the cryogenic gas (coolant) stimulates the skin's cold receptors and creates conditions for the treatment of some socially significant diseases, including rheumatoid arthritis, psoriasis, asthma, allergy, etc. The main operational issue with such units is that the patient's skin releases a large amount of accumulated heat in contact with cryogenic gas. The most effective method to remove this heat flow is to use liquid nitrogen as a heat-receptive medium (cryogen). The world's first cryotherapy unit based on liquid nitrogen was used to discover and prove the effectiveness of cryotherapy. Then, the effectiveness of nitrogen refrigeration systems was questioned and they were replaced by compression refrigeration systems in some countries. In Russia, nitrogen refrigeration technology was developed and adapted to the design of single cryotherapy units. Thus, this cryosauna offers the highest cryotherapy efficacy with the lowest consumption of liquid nitrogen. This work aimed to analyze liquid nitrogen supply units in the cryosauna refrigeration system and identify the most effective technology. It was found that nitrogen refrigeration systems allow to remove a greater amount of heat with the lowest energy consumption. Moreover, no additional refrigeration equipment is required. Contact nitrogen refrigeration systems have lower thermal inertia and higher efficiency of liquid cryogen. It is proposed to use of an alternative cryogen in multi-seat cryotherapy units. Contact nitrogen refrigeration systems in single cryotherapy units is the most reasonable option in terms of power and technology.
- Open Access
- 21 October 2025
- Published by ECO-Vector LLC in Refrigeration Technology
- Vol. 113 (3) , 120-130
Use of liquid nitrogen in Russian single cryotherapy units
BACKGROUND: In the Russian Federation, single cryotherapy units (cryosaunas) using liquid nitrogen as a cryogen have been in operation for more than 25 years. Cryosaunas were developed as an alternative to expensive multi-person units. Clinical practice of using cryosaunas has shown their efficacy and safety and the medical indications for cryotherapy has significantly expanded. These achievements are not considered and even challenged by foreign scholars. AIM: Рromotion of reliable information about the operation principle and advantages of Russian cryosaunas, analysis of modern foreign publications on cryotherapy equipment and technologies, demonstration of the reasons for stagnation of the general cryotherapy method in Western Europe, promotion of a well-founded vision among the Russian professionals about the competitive advantages of various types of cryotherapy equipment. METHODS: The paper is written “based on” a research published by members of the IIR Working Group on Whole Body Cryotherapy/Cryostimulation, issued as an official IIR document. The authors of this publication claim that despite the rapid spread of the cryotherapy method, the technological foundations of the effectiveness of this method have not yet been identified, and the information of its clinical use is unreliable. This statement contradicts actual facts, since in Russia technological recommendations for effectiveness and safety have been enunciated and proved in relation to single-seat cryosaunas, information and clinical effects when using cryosaunas have been published, including in the IIR-affiliated publications, where members of the cryotherapy development working group published their findings. Inaccurate information on the possibilities of using the whole body cryotherapy method discredits cryogenic therapy in general and hinders speading of highly effective domestic equipment. RESULTS: The paper provides data on the discrepancy between a description of the operating principle of cryotherapeutic units with nitrogen cooling, description of the history of the development of this class of cryomedical equipment, description of the operating principle of single-seat cryosaunas, technological solutions that ensure therapeutic effectiveness and safety of equipment using liquid nitrogen as a cryogen. The paper provides Information on the reasons for stagnation of the general cryotherapy method in Western European countries, where the main one is the replacement of nitrogen cooling systems with compression refrigerators. CONCLUSION: Single-seat cryosaunas with nitrogen cooling are a highly effective means of non-drug medical care, the competitive advantages of which are based on the results of many years of research.
- 21 October 2025
- Published by ECO-Vector LLC in Refrigeration Technology
- Vol. 113 (3) , 120-130
Open AccessUse of liquid nitrogen in Russian single cryotherapy units
BACKGROUND: In the Russian Federation, single cryotherapy units (cryosaunas) using liquid nitrogen as a cryogen have been in operation for more than 25 years. Cryosaunas were developed as an alternative to expensive multi-person units. Clinical practice of using cryosaunas has shown their efficacy and safety and the medical indications for cryotherapy has significantly expanded. These achievements are not considered and even challenged by foreign scholars. AIM: Рromotion of reliable information about the operation principle and advantages of Russian cryosaunas, analysis of modern foreign publications on cryotherapy equipment and technologies, demonstration of the reasons for stagnation of the general cryotherapy method in Western Europe, promotion of a well-founded vision among the Russian professionals about the competitive advantages of various types of cryotherapy equipment. METHODS: The paper is written “based on” a research published by members of the IIR Working Group on Whole Body Cryotherapy/Cryostimulation, issued as an official IIR document. The authors of this publication claim that despite the rapid spread of the cryotherapy method, the technological foundations of the effectiveness of this method have not yet been identified, and the information of its clinical use is unreliable. This statement contradicts actual facts, since in Russia technological recommendations for effectiveness and safety have been enunciated and proved in relation to single-seat cryosaunas, information and clinical effects when using cryosaunas have been published, including in the IIR-affiliated publications, where members of the cryotherapy development working group published their findings. Inaccurate information on the possibilities of using the whole body cryotherapy method discredits cryogenic therapy in general and hinders speading of highly effective domestic equipment. RESULTS: The paper provides data on the discrepancy between a description of the operating principle of cryotherapeutic units with nitrogen cooling, description of the history of the development of this class of cryomedical equipment, description of the operating principle of single-seat cryosaunas, technological solutions that ensure therapeutic effectiveness and safety of equipment using liquid nitrogen as a cryogen. The paper provides Information on the reasons for stagnation of the general cryotherapy method in Western European countries, where the main one is the replacement of nitrogen cooling systems with compression refrigerators. CONCLUSION: Single-seat cryosaunas with nitrogen cooling are a highly effective means of non-drug medical care, the competitive advantages of which are based on the results of many years of research.
- Open Access
- 10 August 2025
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 52 (2) , 27-41
Modification of the Mixed Fluid Cascade cycle with heat recovery of the working fluid reverse flows and optimised natural gas flow pressure
Objective. The paper investigates the feasibility of heat recovery from reverse flows in the Mixed Fluid Cascade cycle, highlighting its positive impact on specific energy consumption for liquefied natural gas (LNG) production. Method. The study employs mathematical modeling to analyze both the basic and modified cycle operations. The modified version incorporates heat exchangers in the liquefaction and subcooling stages, allowing reverse flows to be heated by direct flow heat. Additionally, a booster compressor for the feed natural gas flow is introduced to enhance energy efficiency. Result. The numerical experiments assess how variations in feed flow pressure, heat under-recovery in heat exchangers, and their configuration affect specific energy consumption and mass flow rates in the cycle's external cooling stages. Results indicate that thermal load can be redistributed towards high-temperature stages, leading to a reduction in specific energy consumption for LNG production. Conclusion. Overall, the research demonstrates the potential benefits of implementing heat recovery strategies in the Mixed Fluid Cascade cycle, contributing to more efficient LNG production processes.
- 10 August 2025
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 52 (2) , 27-41
Open AccessModification of the Mixed Fluid Cascade cycle with heat recovery of the working fluid reverse flows and optimised natural gas flow pressure
Objective. The paper investigates the feasibility of heat recovery from reverse flows in the Mixed Fluid Cascade cycle, highlighting its positive impact on specific energy consumption for liquefied natural gas (LNG) production. Method. The study employs mathematical modeling to analyze both the basic and modified cycle operations. The modified version incorporates heat exchangers in the liquefaction and subcooling stages, allowing reverse flows to be heated by direct flow heat. Additionally, a booster compressor for the feed natural gas flow is introduced to enhance energy efficiency. Result. The numerical experiments assess how variations in feed flow pressure, heat under-recovery in heat exchangers, and their configuration affect specific energy consumption and mass flow rates in the cycle's external cooling stages. Results indicate that thermal load can be redistributed towards high-temperature stages, leading to a reduction in specific energy consumption for LNG production. Conclusion. Overall, the research demonstrates the potential benefits of implementing heat recovery strategies in the Mixed Fluid Cascade cycle, contributing to more efficient LNG production processes.
- 16 August 2024
- Published by ECO-Vector LLC in Russian Journal of Physiotherapy, Balneology and Rehabilitation
- Vol. 23 (4) , 246-258
Basic principles of cryostimulation equipment efficiency
BACKGROUND: A large number of currently available studies focus on the effects accompanying the whole-body cryostimulation impact. Information about the capabilities of the method differs significantly since the presented results are based on the use of different types of equipment. Therefore, the limits of effective parameters of the whole-body cryostimulation impact should be determined. AIM: Сompare existing technological solutions in terms of efficiency and safety, and to substantiate the known practical advantages of single-chamber cryostimulation devices. MATERIALS AND METHODS: The reasons for the differences in the achieved therapeutic effects and lists of indications are elucidated through comparing the published data on whole-body cryostimulation applications in medical practice based on the use of single- and multi-chamber whole-body cryostimulation devices. RESULTS: The analysis of available information has shown that various authors use the term “whole-body cryostimulation” (WBC) for two different technologies of physiotherapeutic impact on the patient’s body. They differ both in terms of organization (group and individual procedures) and technological parameters of the cryostimulation process (temperature of the cryogenic gas environment and duration of the patient’s stay in the low-temperature cabin). These differences are the reason why the changes in the skin surface temperature in multi-chamber cabins are much smaller than in single-chamber ones, which primarily accounts for the low physiotherapeutic efficiency of procedures in multi-chamber units. CONCLUSION: The analysis shows the reasons for the inconsistent assessments of the whole-body cryostimulation efficiency in different research papers. The main reason for these discrepancies is that the same term refers to two procedures that are physically different. This brings confusion into the scientific data and undermines the credibility of the whole-body cryostimulation method. Further use of cryotherapy in clinical practice requires distinguishing between group cryostimulation and individual cryostimulation.
- 16 August 2024
- Published by ECO-Vector LLC in Russian Journal of Physiotherapy, Balneology and Rehabilitation
- Vol. 23 (4) , 246-258
Basic principles of cryostimulation equipment efficiency
BACKGROUND: A large number of currently available studies focus on the effects accompanying the whole-body cryostimulation impact. Information about the capabilities of the method differs significantly since the presented results are based on the use of different types of equipment. Therefore, the limits of effective parameters of the whole-body cryostimulation impact should be determined. AIM: Сompare existing technological solutions in terms of efficiency and safety, and to substantiate the known practical advantages of single-chamber cryostimulation devices. MATERIALS AND METHODS: The reasons for the differences in the achieved therapeutic effects and lists of indications are elucidated through comparing the published data on whole-body cryostimulation applications in medical practice based on the use of single- and multi-chamber whole-body cryostimulation devices. RESULTS: The analysis of available information has shown that various authors use the term “whole-body cryostimulation” (WBC) for two different technologies of physiotherapeutic impact on the patient’s body. They differ both in terms of organization (group and individual procedures) and technological parameters of the cryostimulation process (temperature of the cryogenic gas environment and duration of the patient’s stay in the low-temperature cabin). These differences are the reason why the changes in the skin surface temperature in multi-chamber cabins are much smaller than in single-chamber ones, which primarily accounts for the low physiotherapeutic efficiency of procedures in multi-chamber units. CONCLUSION: The analysis shows the reasons for the inconsistent assessments of the whole-body cryostimulation efficiency in different research papers. The main reason for these discrepancies is that the same term refers to two procedures that are physically different. This brings confusion into the scientific data and undermines the credibility of the whole-body cryostimulation method. Further use of cryotherapy in clinical practice requires distinguishing between group cryostimulation and individual cryostimulation.
- Open Access
- 1 June 2023
- Published by ITMO University in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
- Vol. 23 (3) , 659
Method of type-C liquified natural gas tank modeling based on volume optimization for future "milk-run" exploitation
Common practice methods of tank design for transportation of liquefied natural gas don’t take into account the specifics of the gas carriers operation under the condition of partial filling of cryogenic tanks. A new method for designing of type-C tank is proposed. Method is based on solving the problem of increasing the volume of transported liquefied natural gas by small-scale inland carriers. The method is based on usage of a number of limiting parameters: minimal allowable ventless operation time, allowable values of the ship’s draft, and the actual duration of voyages between neighboring consumers. The method allows optimizing type, shape, wall thickness, and heat insulation thickness of cryogenic tank. The proposed method is aimed at enlargement of usage of the ship’s hull dimensions. This is achieved by changing the diameter, the distance between centers of the bi-lobe tank, the thickness of the insulation, and the maximum allowable working pressure. An increase in the volume of the tank is achieved by coordination such parameters as the maximum allowable draft of the vessel, the minimum time of ventless storage, and the time of ventless operation under partial filling conditions. The calculation of the ventless operation time is determined by the operating conditions of type-C tanks. The calculation of the heat ingress into the tank takes into account the contact area of liquefied gas and its vapors with the metal wall of the tank. The calculations do not take into account the assumption of thermal equilibrium between the liquid and vapor fractions, which leads to the need to take into account heat transfer from vapor to liquid. The implementation of the method is shown on the example of the modeling of the two-way river-sea type vessel. It is shown that optimization of tank parameters in accordance with proposed criteria can lead to an increase in the volume of transported natural gas by more than 4 %. The method can be used in the development of new and modernization of existing vessel projects to transportation of liquefied natural gas operating in water basins of Lena and Yenisei rivers in the East Siberian region. The described method can also be used in the design of road and rail tanks as well as small- scale bullet tanks for liquefied natural gas.
- 1 June 2023
- Published by ITMO University in Scientific and Technical Journal of Information Technologies, Mechanics and Optics
- Vol. 23 (3) , 659
Open AccessMethod of type-C liquified natural gas tank modeling based on volume optimization for future "milk-run" exploitation
Common practice methods of tank design for transportation of liquefied natural gas don’t take into account the specifics of the gas carriers operation under the condition of partial filling of cryogenic tanks. A new method for designing of type-C tank is proposed. Method is based on solving the problem of increasing the volume of transported liquefied natural gas by small-scale inland carriers. The method is based on usage of a number of limiting parameters: minimal allowable ventless operation time, allowable values of the ship’s draft, and the actual duration of voyages between neighboring consumers. The method allows optimizing type, shape, wall thickness, and heat insulation thickness of cryogenic tank. The proposed method is aimed at enlargement of usage of the ship’s hull dimensions. This is achieved by changing the diameter, the distance between centers of the bi-lobe tank, the thickness of the insulation, and the maximum allowable working pressure. An increase in the volume of the tank is achieved by coordination such parameters as the maximum allowable draft of the vessel, the minimum time of ventless storage, and the time of ventless operation under partial filling conditions. The calculation of the ventless operation time is determined by the operating conditions of type-C tanks. The calculation of the heat ingress into the tank takes into account the contact area of liquefied gas and its vapors with the metal wall of the tank. The calculations do not take into account the assumption of thermal equilibrium between the liquid and vapor fractions, which leads to the need to take into account heat transfer from vapor to liquid. The implementation of the method is shown on the example of the modeling of the two-way river-sea type vessel. It is shown that optimization of tank parameters in accordance with proposed criteria can lead to an increase in the volume of transported natural gas by more than 4 %. The method can be used in the development of new and modernization of existing vessel projects to transportation of liquefied natural gas operating in water basins of Lena and Yenisei rivers in the East Siberian region. The described method can also be used in the design of road and rail tanks as well as small- scale bullet tanks for liquefied natural gas.
- Open Access
- 8 May 2023
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 50 (1) , 6-14-14
Modeling of regasification and recirculation processes during the transportation of liquefied natural gas
Objective. The purpose of the research is modeling and analysis of technological processes occurring at the transshipment terminal of liquefied natural gas.Method. The study is based on the methods of thermodynamic analysis, full-scale and computational modeling of processes and objects of refrigeration and cryogenic equipment in order to find optimal solutions in terms of efficiency, reliability and service life of low-temperature installations, machines and apparatus.Result. The article describes the operation algorithm of an LNG transshipment terminal and proposes a mathematical apparatus for modeling the technological processes occurring in it. Information about the causes of the formation of LNG vapors (Boil-off gas (BOG)) during its transportation and reloading is presented, methods for utilizing excess LNG vapors are considered.Conclusion. To maintain the cryogenic temperature of the unloading arms, an LNG recirculation line (recirculation pipelines) is provided.
- 8 May 2023
- Published by FSB Educational Establishment of Higher Education Daghestan State Technical University in Herald of Dagestan State Technical University. Technical Sciences
- Vol. 50 (1) , 6-14-14
Open AccessModeling of regasification and recirculation processes during the transportation of liquefied natural gas
Objective. The purpose of the research is modeling and analysis of technological processes occurring at the transshipment terminal of liquefied natural gas.Method. The study is based on the methods of thermodynamic analysis, full-scale and computational modeling of processes and objects of refrigeration and cryogenic equipment in order to find optimal solutions in terms of efficiency, reliability and service life of low-temperature installations, machines and apparatus.Result. The article describes the operation algorithm of an LNG transshipment terminal and proposes a mathematical apparatus for modeling the technological processes occurring in it. Information about the causes of the formation of LNG vapors (Boil-off gas (BOG)) during its transportation and reloading is presented, methods for utilizing excess LNG vapors are considered.Conclusion. To maintain the cryogenic temperature of the unloading arms, an LNG recirculation line (recirculation pipelines) is provided.
- Open Access
- 17 February 2023
- Published by ECO-Vector LLC in Refrigeration Technology
- Vol. 111 (3) , 141-149
The Problem of Utilization of Liquefied Natural Gas Vapor at Large-scale LNG Plants
The liquefied natural gas (LNG) is stored under low overpressure in a saturated state in large-capacity tanks with multilayer thermal insulation. Owing to the input of heat from the environment through thermal insulation, LNG is continuously evaporated. Since natural gas is a multicomponent mixture, LNG vapors are enriched with its low-boiling components, then the supply of heat from the environment reduces the amount of liquid in the reservoir and changes its chemical composition. Similar phenomena occur during LNG transportation. The present paper deals with the problem of LNG vapor utilization during its storage and transportation. Information is presented on the causes of the LNG vapor formation (boil-off gas) and methods for its disposal during storage and transportation to consumers. A numerical experiment was performed based on the data of LNG storage in large-capacity storage facilities at the Yamal LNG plant. The technique consists of the estimation of material flows toward the system of accumulation and extradition of LNG. The results show that the vapor flow generated from the inflow of new LNG portions into the storage significantly exceeds that generated from the heat supply from the environment.
- 17 February 2023
- Published by ECO-Vector LLC in Refrigeration Technology
- Vol. 111 (3) , 141-149
Open AccessThe Problem of Utilization of Liquefied Natural Gas Vapor at Large-scale LNG Plants
The liquefied natural gas (LNG) is stored under low overpressure in a saturated state in large-capacity tanks with multilayer thermal insulation. Owing to the input of heat from the environment through thermal insulation, LNG is continuously evaporated. Since natural gas is a multicomponent mixture, LNG vapors are enriched with its low-boiling components, then the supply of heat from the environment reduces the amount of liquid in the reservoir and changes its chemical composition. Similar phenomena occur during LNG transportation. The present paper deals with the problem of LNG vapor utilization during its storage and transportation. Information is presented on the causes of the LNG vapor formation (boil-off gas) and methods for its disposal during storage and transportation to consumers. A numerical experiment was performed based on the data of LNG storage in large-capacity storage facilities at the Yamal LNG plant. The technique consists of the estimation of material flows toward the system of accumulation and extradition of LNG. The results show that the vapor flow generated from the inflow of new LNG portions into the storage significantly exceeds that generated from the heat supply from the environment.
- Open Access
- 1 March 2022
- Published by al-Farabi Kazakh National University in Recent Contributions to Physics
- Vol. 80 (1) , 58-65
Liquid cooling systems for individual cryotherapy units
The use of liquid nitrogen in a cryoagent (LN) is a competitive advantage for individual cryotherapy units (IWBC). During the operation of this electric power industry, it is consumed only for auxiliary operations, since the heat load associated with the implementation of the technology of general cryotherapy (WBC) is covered by gasification of the cryoagent. An important, from a practical point of view, the advantage is that because of this IWBC devices consume no more than 1 kW of power and they can be connected to a household network, as well as create and operate mobile version IWBC installations. There is a widespread misconception that single-seat cryotherapy systems (cryosaunas) use liquid nitrogen irrationally. This opinion is based on the visual effects accompanying IWBC procedures and patients from the cockpit in the treatment room. Air flow of air in an air environment. Cryosauna manufacturers estimate the cost of a cryoagent for one IWBC capacity at 4.5 kg. In an advertisement for group WBC installations, manufacturers of such devices claim that LN costs do not exceed 100 kg/hour, given that the WBC received 50 people per hour, no more than 2 kg of LN is spent per patient. This is an advantage of the Nitrogen Refrigerated System (NCS) multi-seat units. Under the conditions of using a cryoagent in multi-site installations, it does not correspond to the heat fluxes entering the WBC zone, therefore the air temperature in them is unstable and during the procedures it rises by 50-60 K. The article provides a thermophysical analysis of the WBC process in cryosaunas. Использование жидкого азота в качестве криоагента (LN) – основа конкурентных преимуществ для индивидуальных криотерапевтических установок (IWBC). При эксплуатации этих установок электроэнергия расходуется только на вспомогательные операции, так как тепловая нагрузка, связанная с реализацией технологии общего криотерапевтического воздействия (WBC) покрывается за счет газификации криоагента. Важным, с практической точки зрения, преимуществом является то, что из-за этого IWBC аппараты потребляют не более 1 кВт электрической мощности и их можно подключать к бытовой сети, а также создавать и эксплуатировать мобильные версии IWBC установок. Распространено ошибочное мнение о том, что одноместные криотерапевтические системы (криосауны) нерационально используют жидкий азот. Это мнение основано на визуальных эффектах, сопровождающих процедуры IWBC и выход пациентов из кабины в процедурное помещение. Смешиваясь с влажным атмосферным воздухом пары азота создают значительный объем водяного тумана, этот туман создает у наблюдателя ложное представление о больших потерях криогенного газа при выходе элементов из процедурной кабины. Производители криосаун оценивают затраты криоагента на одну IWBC процедуру в 4,5 кг. В рекламе установок для групповой WBC, производители таких аппаратов утверждают, что затраты LN не превышают 100 кг/час, если учесть, что за час WBC получило 50 человек, на одного пациента тратится не более 2 кг LN. Это считается преимуществом многоместных установок с азотной системой охлаждения (NCS). В действительности затраты криоагента в многоместных установках не соответствуют тепловым потокам, поступающим в зону WBC, поэтому температура воздуха в них нестабильна и во время проведения процедуры повышается на 50-60 К. В статье приводится теплофизический анализ процесса WBC в криосаунах. Сұйық азотты криоагент (LN) ретінде пайдалану жеке криотерапия бөлімшелері (IWBC) үшін бәсекелестік артықшылық болып табылады. Бұл қондырғыларды пайдалану кезінде электр энергиясы тек көмекші операцияларға жұмсалады, өйткені жалпы криотерапия (WBC) технологиясын енгізуге байланысты жылу жүктемесі криоагентті газдандырумен жабылады. Маңызды, практикалық тұрғыдан алғанда, артықшылығы - осының арқасында IWBC құрылғылары 1 кВт-тан аспайтын электр қуатын тұтынады және оларды тұрмыстық желіге қосуға, сондай-ақ IWBC қондырғыларының мобильді нұсқаларын жасауға және пайдалануға болады. Бір орынды...
- 1 March 2022
- Published by al-Farabi Kazakh National University in Recent Contributions to Physics
- Vol. 80 (1) , 58-65
Open AccessLiquid cooling systems for individual cryotherapy units
The use of liquid nitrogen in a cryoagent (LN) is a competitive advantage for individual cryotherapy units (IWBC). During the operation of this electric power industry, it is consumed only for auxiliary operations, since the heat load associated with the implementation of the technology of general cryotherapy (WBC) is covered by gasification of the cryoagent. An important, from a practical point of view, the advantage is that because of this IWBC devices consume no more than 1 kW of power and they can be connected to a household network, as well as create and operate mobile version IWBC installations. There is a widespread misconception that single-seat cryotherapy systems (cryosaunas) use liquid nitrogen irrationally. This opinion is based on the visual effects accompanying IWBC procedures and patients from the cockpit in the treatment room. Air flow of air in an air environment. Cryosauna manufacturers estimate the cost of a cryoagent for one IWBC capacity at 4.5 kg. In an advertisement for group WBC installations, manufacturers of such devices claim that LN costs do not exceed 100 kg/hour, given that the WBC received 50 people per hour, no more than 2 kg of LN is spent per patient. This is an advantage of the Nitrogen Refrigerated System (NCS) multi-seat units. Under the conditions of using a cryoagent in multi-site installations, it does not correspond to the heat fluxes entering the WBC zone, therefore the air temperature in them is unstable and during the procedures it rises by 50-60 K. The article provides a thermophysical analysis of the WBC process in cryosaunas. Использование жидкого азота в качестве криоагента (LN) – основа конкурентных преимуществ для индивидуальных криотерапевтических установок (IWBC). При эксплуатации этих установок электроэнергия расходуется только на вспомогательные операции, так как тепловая нагрузка, связанная с реализацией технологии общего криотерапевтического воздействия (WBC) покрывается за счет газификации криоагента. Важным, с практической точки зрения, преимуществом является то, что из-за этого IWBC аппараты потребляют не более 1 кВт электрической мощности и их можно подключать к бытовой сети, а также создавать и эксплуатировать мобильные версии IWBC установок. Распространено ошибочное мнение о том, что одноместные криотерапевтические системы (криосауны) нерационально используют жидкий азот. Это мнение основано на визуальных эффектах, сопровождающих процедуры IWBC и выход пациентов из кабины в процедурное помещение. Смешиваясь с влажным атмосферным воздухом пары азота создают значительный объем водяного тумана, этот туман создает у наблюдателя ложное представление о больших потерях криогенного газа при выходе элементов из процедурной кабины. Производители криосаун оценивают затраты криоагента на одну IWBC процедуру в 4,5 кг. В рекламе установок для групповой WBC, производители таких аппаратов утверждают, что затраты LN не превышают 100 кг/час, если учесть, что за час WBC получило 50 человек, на одного пациента тратится не более 2 кг LN. Это считается преимуществом многоместных установок с азотной системой охлаждения (NCS). В действительности затраты криоагента в многоместных установках не соответствуют тепловым потокам, поступающим в зону WBC, поэтому температура воздуха в них нестабильна и во время проведения процедуры повышается на 50-60 К. В статье приводится теплофизический анализ процесса WBC в криосаунах. Сұйық азотты криоагент (LN) ретінде пайдалану жеке криотерапия бөлімшелері (IWBC) үшін бәсекелестік артықшылық болып табылады. Бұл қондырғыларды пайдалану кезінде электр энергиясы тек көмекші операцияларға жұмсалады, өйткені жалпы криотерапия (WBC) технологиясын енгізуге байланысты жылу жүктемесі криоагентті газдандырумен жабылады. Маңызды, практикалық тұрғыдан алғанда, артықшылығы - осының арқасында IWBC құрылғылары 1 кВт-тан аспайтын электр қуатын тұтынады және оларды тұрмыстық желіге қосуға, сондай-ақ IWBC қондырғыларының мобильді нұсқаларын жасауға және пайдалануға болады. Бір орынды...