XZXuexi Zhang

Xuexi Zhang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Xuexi Zhang has a total of 224 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Effect of pedestal current on the density window for ELM suppression using n = 4 RMP in EAST

    by X M Wu, Y Sun, Q Ma, S Gu, M Jia, Y Q Liu, Y F Wang, C Ye, P Xie, A Loarte, et al.

    Existence of operational window in both edge safety factor ( q 95 ) and line averaged plasma density ( ⟨ n e ⟩ ) for suppression of edge localized modes (ELMs) using n = 4 resonant magnetic perturbations (RMPs) in low input torque plasmas has been observed in EAST experiment, in which q 95 and plasma normalized beta ( β N ) close to that required in ITER high- Q operation. Here, n is toroidal mode number of the magnetic perturbation. In contrast to previous reports from other tokamaks, there is not only an upper density limit but also a lower one for accessing ELM suppression. Modeling results using the MARS-F code show that the RMP with linear plasma response has a peak at an intermediate density and decays as the density increases or decreases, which results in a minimal RMP field penetration threshold at the intermediate density. In this experiment, the observed lower density limit operationally manifests a sensitivity of the q -profile: different densities alter the edge current profile, which change the alignment of the eigenmode structure with the RMP coil configuration, causing a reduction of the resonant field in both low- and high-density cases, and hence making field penetration more difficult. The modeled window of the strongest resonant plasma response in terms of [ ⟨ n e ⟩ , q 95 ] agrees well with the observed ELM suppression in EAST. Peeling–ballooning modes (PBMs) stability analysis using the ELITE code shows that plasmas gradually approach the peeling instability boundary caused by an increase of edge bootstrap current as the plasma density decreases, which is consistent with the observation that ELMs come back again in lower density plasmas for fixed q 95 . These results indicate that linear modeling with full toroidal geometry can well predict the optimized RMP configuration for ELM suppression and reveal the important roles of pedestal plasma current, which needs to be carefully considered in the application of high n RMPs for ELM suppression in future ITER.

  • Open Access

    New Tokamak Plasma Confinement Regime Realized by Utilizing Small Magnetic Perturbations in the EAST Tokamak

    by Hui Sheng, Youwen Sun, Alberto Loarte, Tonghui Shi, Yingying Li, Jiale Chen, Yueqiang Liu, Yunfeng Liang, Shaojie Wang, Ling Zhang, et al.

    Achieving sustained high plasma confinement both in the core and at the edge, without crashes due to edge instabilities, is highly desirable for efficient fusion energy production in a tokamak device. However, control of edge instabilities usually results in core plasma confinement degradation. Here we demonstrate a new improved core confinement plasma regime in EAST, characterized by a sustainable internal transport barrier (ITB) and effective control of edge instabilities, both achieved by applying small resonant magnetic field perturbations (RMPs) at just 0.1% of the equilibrium field amplitude. The key is to localize the perturbations at the edge, which can be effectively realized by use of RMPs with high toroidal mode numbers. Nonlinear interaction between the perturbed magnetic fields and plasma, especially tungsten impurities, on different scales plays a key role in lowering the threshold heating power by a factor of 2 for triggering the formation of an ITB to improve core confinement. More importantly, the improved core confinement can be actively controlled by tuning the perturbed field profile. This provides an attractive method and a physical basis for an integrated solution of keeping high core confinement during edge stability control for a future fusion reactor.


  • Open Access

    Simulations of plasma current induced by toroidal field ramping down on tokamaks

    by H. C. Fan, G. Q. Li, M. Q. Wu, X. X. Zhang, X. H. Wu, A. M. Garofalo

    In tokamak experiments, the BT ramping down can drive off-axis and parallel inductive current. This approach leads to a decrease in q95 and an increase in normalized beta, βN. The off-axis inductive current also broadens the current profile. Typically, the 1.5D transport code is used to simulate the time evolution of the plasma current profile, which is based on the flux-surface-averaged Faraday’s law. The ONETWO code is one of those transport codes. However, this code cannot simulate the situation of the evolving toroidal field BT. This article proposes a new time-dependent model to take into account the BT ramping down situation. A modified formula of flux-surface-averaged Faraday’s law was derived to consider the effect of the BT ramping rate on the current evolution, and it was implemented in the ONETWO code. Then, the modified ONETWO code was used to simulate the BT ramping down experiment on DIII-D. The simulation result of the plasma current evolution with BT ramping down shows a broader current profile with smaller ohmic current induced by the poloidal field, compared to that without BT ramping down.

  • Open Access

    Reconstruction of current profiles from external magnetic and MSE measurements on DIII-D

    by Xuexi Zhang, Guoqiang Li, Torrin Bechtel Amara

    This work introduces a new current model into the EFIT code for plasma current profile reconstruction. Using this model, edge-localized current density profiles are reconstructed solely from external magnetic measurements. Quantitative comparisons show that edge current profiles obtained with the new current model align closely with those from kinetic equilibrium reconstruction. The new model enables current density reconstruction with fewer diagnostics than kinetic equilibrium reconstruction (Lao et al 1990 Nucl. Fusion 30 1035–49), demonstrating that edge-localized current density information can be obtained from external magnetic measurements only, without the help of kinetic profiles and internal diagnostics, and without using the bootstrap current model. Furthermore, with the constraints of external magnetic and MSE measurements, current profiles in full radius obtained from the new model are in good agreement with the results of kinetic equilibrium reconstruction, which not only improves the efficiency of current reconstruction but also helps avoid possible errors caused by different kinds of diagnoses. Possible applications are also discussed, and a brief analysis of the evolution of the full-radius current density is performed. Noticeable decreases in both the magnitude and gradient of the edge current around the time of ELM bursts are observed. Moreover, analysis of the full radius current density profiles ( ρ N = 0 − 1.0 , ρ N   denotes to square root of the normalized toroidal flux) reveals that as the edge current changes, the inner current also changes following a sinusoidal-like pattern at almost all time slices during four type-I ELMs in discharge 161493. The current evolution in the inner region ( ρ N =   0.2 − 0.6 ) is synchronized with the boundary region ( ρ N =   0.89 − 1.0 ), while the intermediate region ( ρ N =   0.6 − 0.89 ) shows opposite behavior. This sinusoidal-like variations in full-radius current density profile indicates strong core-pedestal coupling, suggesting ELMs significantly affect core plasmas, though current changes manifest differently across radial regions.


  • Open Access

    ELM penetration in ITB plasma on EAST tokamak

    by X. Gao, K.N. Geng, X.X. Zhang, K. Hanada, K.X. Ye, Y.F. Liang, Z. Zhou, L. Yu, G.S. Li, T. Zhang, et al.

    The penetration of an edge-localized mode (ELM) into an internal transport barrier (ITB) plasma has been studied on the EAST tokamak with a flat central safety factor profile q(0) ∼ 1 recently. The experiment indicates that when the ELM inward penetration radius reaches the ITB foot region, a significant influence on the ITB plasma is manifested, leading to the shrinking or collapse of the ITB on the EAST tokamak. Observations suggest that the onset of large ELM penetration, which extremely reduces the pedestal temperature and density, can trigger the collapse of the ITB, by means of the off-axis sawtooth on the EAST tokamak. The off-axis sawtooth events contribute to a further decrement in the core stored energy after a larger ELM crash in the pedestal region. The reversal surface of the off-axis sawtooth is situated around the ITB foot. The delay time between the ELM penetration reached to the ITB foot and the followed off-axis sawtooth collapse is about 2–3 ms. It is also found that the expanding of ITB is related to the net heating power. Mechanism of ITB collapse from ELM penetration to the off-axis sawtooth triggered is not yet clear. Experimental results for understanding ELM penetration in ITB plasmas are summarized and discussed.


  • Open Access

    Influence of n = 4 RMPs on pedestal structure and stability in EAST

    by X.M. Wu, Y. Sun, Q. Ma, S. Gu, Y.F. Wang, K.N. Geng, X.X. Zhang, G.Q. Li, H. Sheng, T. Zhang, et al.

    Changes of pedestal structure and stability caused by n = 4 resonant magnetic perturbations (RMPs) for control of Edge Localized Modes (ELMs) in the EAST tokamak in a target plasma close to the ITER high-Q scenario are studied in this paper. Here, n is the toroidal mode number of RMPs. It is shown that plasma pedestal density profiles are significantly changed at different stages, i.e. ELM mitigation and suppression, during the application of n = 4 RMPs, compared to the phase without RMPs. The pedestal top density decreases while the separatrix density slightly increases, leading to a reduction in the pedestal density gradient at the stage of ELM mitigation. There is a further sudden increase of separatrix density and hence drops of pedestal density gradient after accessing to ELM suppression, which is consistent with the picture that a nonlinear bifurcation in edge magnetic topology at the transition from ELM mitigation to suppression. The decrease in pedestal top density and pedestal density gradient causes the reduction of edge pressure gradient and bootstrap current. Stability analysis using the ELITE code shows that the dominant modes in the phase without RMP are low-n peeling-ballooning modes (PBMs). The growth rate of the low-n PBMs decrease with decreasing edge pressure gradient and bootstrap current, which is consistent with the observation of ELM mitigation and suppression during the application of RMPs. Different effects from edge plasma toroidal rotation, temperature, separatrix density etc on the stability of PBMs are also investigated via numerical modelling based on the reference case in EAST, which could be helpful for the optimization of operational window for accessing to ELM suppression in the future studies.


  • Experimental study of core MHD events in EAST advanced scenarios by microwave reflectometry

    by Gongshun Li, Tao Zhang, Kangning Geng, Fei Wen, Xuexi Zhang, Kaixuan Ye, Jia Huang, Yanjun Liu, Zhen Zhou, Ziqiang Zhou, et al.

    Fishbone modes and Alfvén eigenmodes (AEs) are two of the most significant core magnetohydrodynamic (MHD) events observed in advanced scenarios on the Experimental Advanced Superconducting Tokamak. Microwave reflectometry, with its excellent spatial and temporal resolution, has been utilized to study their behaviors. During the fishbone event, the density profile and its gradient ( ∇ n e ), measured by density profile reflectometry, in the vicinity of the fishbone mode are modulated by the rotation of internal kink modes. Furthermore, the position of the maximum density gradient ( ∇ n e,max ) aligns with the fishbone location, and its value exhibits a positive correlation with the amplitude of the internal kink modes. Additionally, the fishbone can be detected by monitoring the center of gravity oscillations in a conventional reflectometry called multi-channel poloidal correlation reflectometry (PCR). Furthermore, the spectrogram of density fluctuation amplitude, measured by the PCR, reveals AEs more distinctly than commonly used diagnostics such as electron cyclotron emission and high frequency Mirnov coils. These findings not only help to better understand the characteristics of these MHD behaviors, but also contribute to the q-profile reconstruction and investigating the related physical processes.


  • Open Access

    High-frequency fluctuation and EHO-like mode in the H-mode pedestal on the EAST tokamak

    by K.N. Geng, T. Zhang, G.S. Li, W.H. Ye, K.X. Ye, F.B. Zhong, Y. Chao, S.Q. Yang, Lin Yu, Z.Q. Zhou, et al.

    In the pedestal region of the Experimental Advanced Superconducting Tokamak (EAST) during high confinement mode plasma operations with radio-frequency heating, two distinct fluctuations are observed: high-frequency fluctuations (HFFs) and edge harmonic oscillation-like (EHO-like) modes. The HFFs are characterized by intermittent fluctuations with a broadband frequency range of 1 − 3  MHz and a poloidal wave number ( k θ ) greater than 0.9  c m − 1 . On the other hand, the EHO-like mode exhibits characteristics similar to magnetohydrodynamics (MHD)-like modes with n = 1−5 and lower poloidal wave numbers ( k θ ⩽ 0.12  c m − 1 ). During the pedestal establishing phase following the L–H transition, a significant concurrent presence of HFF and EHO-like modes in high-density pedestal regions has been noted. In this phase, the EHO-like mode not only modulates the amplitude of the HFF but also engages in nonlinear interactions. The occurrence of EHO-like mode and HFF is associated with particle transport toward the divertor, though it is notably less than that caused by edge coherent modes. During the inter-edge localized mode (ELM) period, a significant decrease in the D α baseline is observed whenever the low frequency fluctuation (LFF) weakens and the HFF grows, prior to each large ELM. One possible explanation is that the rapid increase of E × B shear stabilizes the LFF and destabilizes the HFF, which lowers the pedestal transport and enables the further growth of the pedestal until the onset of the ELM.


  • Open Access

    Mechanism of enhanced ion temperature by impurity seeding in EAST H-mode plasma

    by Xiu Da Yang, Xianzu Gong, Jinping Qian, Yifei Jin, Pierre Manas, Pan Li, Clarisse Bourdelle, Yuqi Chu, Bin Zhang, Yingjie Chen, et al.

    Ion temperature (T i) profiles are commonly observed to increase in peaking, leading to higher central T i, after impurity seeding in the EAST H-mode plasma. Argon can be more efficient at raising T i than neon. Toroidal rotation can also be enhanced in scenarios with NBI heating. A more significant increase in toroidal rotation is brought about by seeding argon than seeding neon. Turbulence is experimentally observed to be suppressed. Extensive modeling using the quasilinear gyrokinetic code QuaLiKiz is performed to explain the above observations. It is found that the enhanced T i can always be explained by the turbulence stabilization. However, the mechanism of turbulence stabilization is related to heating methods and the seeding impurity species. In the pure RF (ECRH + LHW) heating scenarios, where only the trapped electron mode (TEM) exists, argon can stabilize the TEM more significantly than neon due to its higher charge and heavier mass. In scenarios with increasing NBI power, the ion heat flux can be dominated by the ion temperature gradient (ITG), thus the enhanced T i is mainly attributed to ITG stabilization. In these cases, except argon’s ability to more efficiently stabilize TEM, more evident increased toroidal rotation brought about by argon seeding can also be beneficial to stabilize turbulence.