Izabela Korzec
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Izabela Korzec has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Sylwester Samborski
Department of Fundamentals of Production Engineering, Lublin University of Technology, 20-618 Lublin, Poland
4 shared publications - Tomasz Łusiak
Department of Thermodynamics, Fluid Mechanics and Aviation Propulsion Systems, Lublin University of Technology, Nadbystrzycka 38 D, 20-618 Lublin, Poland
3 shared publications - Farida Kharchenko
Department of Agricultural Engineering, Sumy National Agrarian University, 40-021 Sumy, Ukraine
2 shared publications - Serhii Kharchenko
Lublin University of Technology
2 shared publications - Agnieszka Skoczylas
Lublin University of Technology
1 shared publication - Andrii Stelmakh Andrii
Сумський національний аграрний університет
1 shared publication
Latest Publications
- Open Access
- 1 December 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 18 (8) , 238-255
Dynamics of Loose Materials and Oscillations of Cylindrical Perforated Sifting Surfaces with Volumetric Riffles
The application of cylindrical perforated sifting surfaces with volumetric riffles in vibrocentrifugal machines for separation of loose materials requires the development of methodologies for studying the dynamics of particles in working zones and ensuring structural reliability. The analogy with...
- 1 December 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 18 (8) , 238-255
Open AccessDynamics of Loose Materials and Oscillations of Cylindrical Perforated Sifting Surfaces with Volumetric Riffles
The application of cylindrical perforated sifting surfaces with volumetric riffles in vibrocentrifugal machines for separation of loose materials requires the development of methodologies for studying the dynamics of particles in working zones and ensuring structural reliability. The analogy with...
- Open Access
Identification of the Natural Frequencies of Oscillations of Perforated Vibrosurfaces with Holes of Complex Geometry
The reliability of perforated vibrosurfaces is one of the main parameters of the efficiency of their operation in many technological processes. Existing methods for studying vibrosurfaces with standard single holes and the corresponding results cannot be used to study the reliability of vibration surfaces with holes of complex geometric shapes. The proposed method is based on the experimental modal identification of the parameters of natural oscillations, the parallel creation of a numerical model using the finite element method, and the comparison of the results. Three vibrosurfaces were investigated: solid without holes, perforated with standard round holes, perforated with holes in the form of a five-petal epicycloid. As a result of experiments, the divergence of natural vibrations of perforated surfaces depending on the side of the punch and matrix during their technological production by pressing was established. The result of the research was a refined adequate numerical model that takes into account the presence of holes in complex geometric shapes. A methodology has been developed, and analytical expressions with perforation coefficients have been obtained, which allow obtaining values of natural oscillations of vibration surfaces depending on the properties of metal, boundary conditions, and structural and kinematic parameters.
Open AccessIdentification of the Natural Frequencies of Oscillations of Perforated Vibrosurfaces with Holes of Complex Geometry
The reliability of perforated vibrosurfaces is one of the main parameters of the efficiency of their operation in many technological processes. Existing methods for studying vibrosurfaces with standard single holes and the corresponding results cannot be used to study the reliability of vibration surfaces with holes of complex geometric shapes. The proposed method is based on the experimental modal identification of the parameters of natural oscillations, the parallel creation of a numerical model using the finite element method, and the comparison of the results. Three vibrosurfaces were investigated: solid without holes, perforated with standard round holes, perforated with holes in the form of a five-petal epicycloid. As a result of experiments, the divergence of natural vibrations of perforated surfaces depending on the side of the punch and matrix during their technological production by pressing was established. The result of the research was a refined adequate numerical model that takes into account the presence of holes in complex geometric shapes. A methodology has been developed, and analytical expressions with perforation coefficients have been obtained, which allow obtaining values of natural oscillations of vibration surfaces depending on the properties of metal, boundary conditions, and structural and kinematic parameters.
- 19 April 2023
- Published by Uniwersytet Przyrodniczy w Lublinie
Damage identification of FRP composite with using Acoustic Emission
- 19 April 2023
- Published by Uniwersytet Przyrodniczy w Lublinie
Damage identification of FRP composite with using Acoustic Emission
- Open Access
- 1 February 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 17 (1) , 210-221
Application of the Acoustic Emission Technique for Damage Identification in the Fiber Reinforced Polymer Composites
A set of experiments having in target determination of fracture resistance was performed on the Fiber Reinforced Polymer (FRP) composites specimens with an additional monitoring of damage onset and evolution with a so-called Acoustic Emission (AE) technique. The AE technique is a non-destructive...
- 1 February 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 17 (1) , 210-221
Open AccessApplication of the Acoustic Emission Technique for Damage Identification in the Fiber Reinforced Polymer Composites
A set of experiments having in target determination of fracture resistance was performed on the Fiber Reinforced Polymer (FRP) composites specimens with an additional monitoring of damage onset and evolution with a so-called Acoustic Emission (AE) technique. The AE technique is a non-destructive...
- Open Access
- 1 February 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 17 (1) , 243-251
Surface Imaging of Temperature – Research Method of Heat Transfer
The method does not differ in difficulty from the standard surface temperature imaging method, which is its unquestionable advantage. The disadvantage is the need to use test models made of materials transmitting visible light in the full range (blue light for excitation and red as a recorded...
- 1 February 2023
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 17 (1) , 243-251
Open AccessSurface Imaging of Temperature – Research Method of Heat Transfer
The method does not differ in difficulty from the standard surface temperature imaging method, which is its unquestionable advantage. The disadvantage is the need to use test models made of materials transmitting visible light in the full range (blue light for excitation and red as a recorded...
- Open Access
Non-Destructive Detection of Real Defects in Polymer Composites by Ultrasonic Testing and Recurrence Analysis
This paper presents results of ultrasonic non-destructive testing of carbon fibre-reinforced plastics (CFRPs) and glass-fibre reinforced plastics (GFRPs). First, ultrasonic C-scan analysis was used to detect real defects inside the composite materials. Next, the composite materials were subjected to drilling in the area of defect formation, and measured forces were used to analyse the drilling process using recurrence methods. Results have confirmed that recurrence methods can be used to detect defects formed inside a composite material during machining.
Open AccessNon-Destructive Detection of Real Defects in Polymer Composites by Ultrasonic Testing and Recurrence Analysis
This paper presents results of ultrasonic non-destructive testing of carbon fibre-reinforced plastics (CFRPs) and glass-fibre reinforced plastics (GFRPs). First, ultrasonic C-scan analysis was used to detect real defects inside the composite materials. Next, the composite materials were subjected to drilling in the area of defect formation, and measured forces were used to analyse the drilling process using recurrence methods. Results have confirmed that recurrence methods can be used to detect defects formed inside a composite material during machining.
- Open Access
- 2 March 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 16 (2) , 120-130
A Study on Strength and Failure of Fabric Reinforced Polymer Composites
The paper presents a study on influence of different fabric weave and fabric orientation on strength properties of fiber reinforced polymer composites. The research concerns materials used in a new type of rotorcraft. Four series of laminates were fabricated with hand forming, using the MGS...
- 2 March 2022
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Advances in Science and Technology Research Journal
- Vol. 16 (2) , 120-130
Open AccessA Study on Strength and Failure of Fabric Reinforced Polymer Composites
The paper presents a study on influence of different fabric weave and fabric orientation on strength properties of fiber reinforced polymer composites. The research concerns materials used in a new type of rotorcraft. Four series of laminates were fabricated with hand forming, using the MGS...
- Open Access
- 1 March 2021
- Published by Walter de Gruyter GmbH in Transactions on Aerospace Research
- Vol. 2021 (1) , 64-74
Tests of Selected Mechanical Properties of Welded Joints in Rotorcraft
The following article presents experimental use of different ways of inguinal connecting of aircraft elements using TIG (Tungsten Inert Gas), MAG (Metal Active Gas) and arched coated electrode. The object of the research were samples of rotorcraft elements, which were connected to each other by TIG, MAG methods and the coated electrode. The main aim of the research was to determine selected mechanical properties in particular hardness and strength of inguinal joints and then, based on the tests carried out, the best methods were selected.
- 1 March 2021
- Published by Walter de Gruyter GmbH in Transactions on Aerospace Research
- Vol. 2021 (1) , 64-74
Open AccessTests of Selected Mechanical Properties of Welded Joints in Rotorcraft
The following article presents experimental use of different ways of inguinal connecting of aircraft elements using TIG (Tungsten Inert Gas), MAG (Metal Active Gas) and arched coated electrode. The object of the research were samples of rotorcraft elements, which were connected to each other by TIG, MAG methods and the coated electrode. The main aim of the research was to determine selected mechanical properties in particular hardness and strength of inguinal joints and then, based on the tests carried out, the best methods were selected.