FKFarida Kharchenko

Farida Kharchenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Farida Kharchenko has a total of 32 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a Methodology for Assessing Mechanical Damage in Biological Objects: Impact Parameters and Micro-Damage Analysis

    by Serhii Kharchenko, Sylwester Samborski, Rafat Al Afif, Farida Kharchenko, Mariusz Kłonica, Mykhailo Piven

    Mechanical impacts on loose biological objects caused by technological equipment can result in both external and internal damage, compromising the quality, storage life, and reproductive capacity of biological materials. This study addresses the need for a reliable methodology to assess such damage. The research aims to develop a systematic approach for identifying damage parameters in biological objects. The methodology involves applying artificial loading to biological samples, determining destructive forces, conducting tomography, processing images, and evaluating damage extent. Experiments were performed using a standard material testing machine and a custom-built impact test bench with varying parameters such as static and dynamic characteristics, object orientation, and load magnitude. The microstructure of the sample, in the form of 2D cross-sections and 3D images, was obtained using X-ray computed tomography. Image processing, with the Monte Carlo method, allowed for the calculation of microdamage coefficients. The key result of this study is the identification of a relationship between the microdamage coefficient of corn seeds and external load parameters. These findings are critical for understanding the effects of mechanical impact on biological materials. Future research should focus on expanding the study to other biological objects and enhancing measurement techniques for more precise damage assessment.

  • Open Access

    Dynamics of Loose Materials and Oscillations of Cylindrical Perforated Sifting Surfaces with Volumetric Riffles

    by Serhii Kharchenko, Sylwester Samborski, Farida Kharchenko, Izabela Korzec-Strzałka, Andrii Stelmakh Andrii

    The application of cylindrical perforated sifting surfaces with volumetric riffles in vibrocentrifugal machines for separation of loose materials requires the development of methodologies for studying the dynamics of particles in working zones and ensuring structural reliability. The analogy with...


  • Open Access

    АНАЛІЗ КОНСТРУКЦІЙ ПЕРФОРОВАНИХ ПРОСІЮВАЛЬНИХ ПОВЕРХОНЬ СЕПАРУВАЛЬНОГО ОБЛАДНАННЯ, ПЕРСПЕКТИВИ ЇХ РОЗВИТКУ

    by Сергій Олександрович Харченко, Фаріда Магомедівна Харченко, Андрій Миколайович Стельмах, Володимир Михайлович Погуляй, Олександр Вікторович Майоров, Олег Іванович Гузь, S. O. Kharchenko, F. M. Kharchenko, A. M. Stelmakh, V. M. Pogulyai, et al.

    Одними з основних робочих органів сепарувального обладнання є перфоровані просіювальні поверхні, які працюють з вібрацією та поділяють компоненти сипких зернових матеріалів за розмірами. Значний вплив параметрів просіювальних поверхонь на ефективність процесу сепарування сипкого матеріалу, робить їх визначальними по відношенню до технологічної продуктивності та якості сепарувального обладнання. Заміна перфорованих просіювальних поверхонь не потребує суттєвих змін в конструкції сепарувлаьного обладнання. Попри значний вплив на сьогодні існують низка класифікацій за конструктивними ознаками, які утруднюють розуміння перспектив та інновацій по відношенню до інтенсифікації процесу сепарування сипких зернових матеріалів. Крім того, маємо постійний розвиток та появу нових конструкцій, способів виготовлення та удосконалення перфорованих просіювальних поверхонь. Метою роботи стало узагальнення та розробка класифікації перфорованих просіювальних поверхонь сепарувального обладнання, яка дозволить визначати перспективи в інтенсифікації процесу сепарування сипких зернових матеріалів. В результаті аналізу існуючих досліджень встановлено наступні відмінні ознаки в перфорованих просіювальних поверхнях: за способом виготовлення, за розташуванням робочої поверхні, за рухомістю робочої поверхні, за використанням додаткових елементів, за формою отворів, за формою робочої поверхні, за розташуванням отворів, за технологічною операцією, за розміром отворів, за матеріалом з якого їх виготовлено. Запропоновано класифікацію перфорованих просіювальних поверхонь за вказаними ознаками з детальним поділом на підкласи. Запропоновано технічну реалізацію перспективного способу з інтенсивного розпушення шару сипкого зернового матеріалу за рахунок використання перфорованої просіювальної поверхні з об’ємною рифленою структурою. Встановлені фактори, які впливають на ефективність процесу сепарування сипких зернових матеріалів. Отримані результати дозволяють відшукувати можливі удосконалення конструкцій просіювальних поверхонь та інтенсифікувати процеси сепарування сипких зернових матеріалів на сепарувальному обладнанні.


  • Open Access

    АНАЛІЗ СИСТЕМ ОЧИЩЕННЯ ОТВОРІВ ПЕРФОРОВАНИХ ПРОСІЮВАЛЬНИХ ПОВЕРХОНЬ СЕПАРУВАЛЬНИХ МАШИН

    by Сергій Олександрович Харченко, Фаріда Магомедівна Харченко, Ігор Вікторович Котляревський, Оксана Володимирівна Панкова, S. O. Kharchenko, F. M. Kharchenko, I. V. Kotliarevskyi

    Продуктивність та якість роботи сепарувальних решетних машин при поділі компонентів сипких матеріалів залежить від ефективності роботи системи очищення отворів. Блокування отворів відбувається за рахунок подібності їх розмірів з розмірами компонентів сипких матеріалів. При цьому у разі наявності заблокованих отворів відбувається зменшення площі просіювання перфорованих поверхонь та зниження продуктивності сепарувальних машин. Сучасні вимоги виробництва та поява нових науково-технічних розробок, таких як решета з отворами складної геометрії, утворили необхідність підвищення ефективності систем очищення. Розробка нових та удосконалення систем очищення не можлива без проведення аналізу існуючого стану та визначення перспективних напрямків удосконалення. Для цього проведено системний аналіз конструкцій та способів підвищення ефективності систем очищення з визначенням рівня перспективності. Визначені умови та критерії ефективності систем очищення, параметри їх робочих елементів. Проведеним аналізом досліджень, з урахуванням сучасних потреб виробників, встановлені вимоги щодо систем очищення решетних вібросепараторів: безперервне в часі та інтенсивне очищення отворів решет від компонентів сипких матеріалів, що забезпечує мінімальне відхилення ефективної площі просіювання від базового; надійність очисних робочих елементів систем очищення повинна базуватися на максимальній довговічності та мінімальному зношені; мінімізація впливу зовнішніх умов на технологічну ефективність систем очищення; мінімізація негативного впливу на процеси сепарування та надійність елементів сепарувальних машин; мінімізація рівня травмування компонентів сипких матеріалів та засмічення кінцевих продуктів сепарування. Основними ознаками поділу систем очищення є: за характером впливу на компоненти сипких матеріалів з використанням робочих елементів, самоочищення отворів просіювальних поверхонь, з використанням спеціальних пристроїв; за типом робочих елементів фрикційної та ударної дії; за типом приводу з кривошипно-шатунним, ланцюговим, безприводним та з гнучким зв’язком. Перспективними за комплексом показників, для подальшого дослідження обрані системи очищення з робочими елементами ударної дії та вільним рухом – кулькового типу. Результатом роботи стала узагальнена класифікація систем очищення отворів перфорованих просіювальних поверхонь сепарувальних машин, яка дозволить визначити шляхи для подальших удосконалень та розробляти нові робочі очисні елементи.

  • Open Access

    The natural oscillations of perforated sifting surfaces with epicycloidal holes

    by Serhii Kharchenko, Sylwester Samborski, Jakub Paśnik, Farida Kharchenko

    The use of vibrational perforated sifting surfaces with holes of complex geometry provides intensive separation of loose materials by particle size and increases the technological efficiency of separating equipment. The lack of research methodologies and data on the oscillations of such...

  • Open Access

    Determination of Hole Blocking Conditions for Perforated Sifting Surfaces

    by Serhii Kharchenko, Sylwester Samborski, Farida Kharchenko, Ihor Kotliarevskyi

    The efficiency of widespread technological processes of sieve sifting of loose materials depends on timely cleaning of holes from the blocked particles. The blocking of holes occurs under specific conditions related to mechanical-and-physical properties of loose material particles, constructive...


  • Open Access

    Identification of the Natural Frequencies of Oscillations of Perforated Vibrosurfaces with Holes of Complex Geometry

    by Serhii Kharchenko, Sylwester Samborski, Farida Kharchenko, Andrzej Mitura, Jakub Paśnik, Izabela Korzec

    The reliability of perforated vibrosurfaces is one of the main parameters of the efficiency of their operation in many technological processes. Existing methods for studying vibrosurfaces with standard single holes and the corresponding results cannot be used to study the reliability of vibration surfaces with holes of complex geometric shapes. The proposed method is based on the experimental modal identification of the parameters of natural oscillations, the parallel creation of a numerical model using the finite element method, and the comparison of the results. Three vibrosurfaces were investigated: solid without holes, perforated with standard round holes, perforated with holes in the form of a five-petal epicycloid. As a result of experiments, the divergence of natural vibrations of perforated surfaces depending on the side of the punch and matrix during their technological production by pressing was established. The result of the research was a refined adequate numerical model that takes into account the presence of holes in complex geometric shapes. A methodology has been developed, and analytical expressions with perforation coefficients have been obtained, which allow obtaining values of natural oscillations of vibration surfaces depending on the properties of metal, boundary conditions, and structural and kinematic parameters.


  • Open Access

    About Calculation and Forecast of Temperature in the Layer Cell of Self-Heating of Raw Materials in a Silo

    by Vasil Olshanskyi, Serhii Kharchenko, Farida Kharchenko, Stepan Kovalyshyn, Taras Shchur, Yuriy Gabriel, Patrycja Bałdowska-Witos, Andrzej Tomporowski, Robert Kasner

    The article clarifies an approximate variant for calculating the temperature in an inhomogeneous layer cell without a clear boundary under the assumption of significant distance in its center between the upper and lower ends of the silo when heat exchange conditions have little effect on the development of temperature in the layer cell due to poor thermal conductivity. The normal Gaussian law concerning distribution of thermal sources in the cell on an axis of a silo is accepted. The integral cosine of the Fourier transform is used to construct the analytical solution of the nonstationary thermal conductivity problem. A compact formula for calculating the increase in excess temperature in the center of the self-heating cell over time is derived and used to identify the parameters of the cell. The change in temperature at other points of the raw material is expressed through incomplete gamma function that is reduced to the probability integral. Calculations show that for the selected distribution of thermal sources, the temperature increase slows down rapidly with separation from the center of the cell. The possibility of determining the pattern distribution of the localized field of excess ambient temperature over time is proved. Examples of density identification of thermal sources are given. After identification, the calculation formulas become consistent with the experiment and suitable for the theoretical prediction of temperature rise in the raw material. The approbation of the proposed mathematical expressions to identify the parameters of the self-heating process of raw materials showed high accuracy relative to experimental data with a deviation of 0.01–0.015%. It is possible not only to determine the parameters of the self-heating cell but also to predict the time of reaching a flammable temperature in it.


  • Open Access

    Identification of a mixture of grain particle velocity through the holes of the vibrating sieves grain separators

    by Leonid Tishchenko, Sergei Kharchenko, Farida Kharchenko, Vadym Bredykhin, Oleg Tsurkan

    Identification of a mixture of grain particle velocity through the holes of the vibrating sieves grain separators