Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Tatiana Fedorovna Sheshko has a total of 90 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Alkaline Earth Metal-Doped GdFeO3 Perovskites for Sustainable Light Olefin Production from Biomass Syngas: The Interplay of Oxygen Vacancies, Acid–Base Sites, and Catalytic Performance

    by Elizaveta Mikhailovna Borodina, Alisa Sergeevna Lazarenko, Ekaterina Borisovna Markova, Tatiana Alekseevna Kryuchkova, Alexander Genrikhovich Cherednichenko, Tatiana Fedorovna Sheshko

    The catalytic conversion of biomass-derived synthesis gas via the Fischer–Tropsch route represents a promising pathway for producing high-value products from renewable resources. This study investigates iron-containing complex oxides as catalysts for the conversion of model biomass-derived syngas. Ca-, Sr-, and Ba-doped GdFeO3 catalysts were synthesized via a sol–gel route and characterized by BET N2-physisorption, X-ray diffraction, and Fourier-transform IR spectroscopy. Their acid–base properties and oxygen non-stoichiometry were also investigated. Catalytic performance was evaluated in a fixed-bed reactor in two modes: hydrogenation of pure CO and of a CO + CO2 mixture simulating biomass-derived syngas. The results indicate that Ca, Sr, and Ba doping promotes oxygen-vacancy formation and an increase in the abundance of both acidic and basic surface sites. The effect of the promoter is not uniform with respect to activity and selectivity: Ca and Ba predominantly enhance CO and COx conversion, whereas 1% Sr primarily improves the selectivity toward light olefins at moderate conversion. All promoters suppress methane formation and enhance ethylene–propylene selectivity. Correlations are established between the surface acid–base characteristics and catalytic performance of the doped samples.

  • Carbon dioxide involvement in the catalytic production of light olefins via Gd—Fe—Co perovskite-type complex oxides

    by P. V. Akhmina, L. G. Skvortsova, E. M. Borodina, T. A. Kryuchkova, I. A. Zvereva, A. G. Cherednichenko, T. F. Sheshko, A. O. Terent’eV


  • Open Access

    Hydrogenation of Simulated Bio-Syngas in the Presence of GdBO3 (B = Fe, Co, Mn) Perovskite-Type Oxides

    by Tatiana F. Sheshko, Polina V. Akhmina, Liliya G. Skvortsova, Elizaveta M. Borodina, Tatiana A. Kryuchkova, Irina A. Zvereva, Alexander G. Cherednichenko

    Direct light olefin synthesis from bio-syngas hydrogenation is a promising pathway to decarbonize the chemical industry. The present study is devoted to the investigation of co-hydrogenation of carbon oxides in the presence of complex systems with the perovskite structure GdBO3 (B = Fe, Mn, Co). The catalyst samples were synthesized by sol-gel technology and characterized by XRD, XPS, BET and TPR. It was found that the Fe/Mn-containing samples exhibited efficient catalysis of the hydrogenation of simulated bio-syngas to light hydrocarbons. The GdMnO3 catalyst exhibits selectivity for C2–C3 light olefins of up to 37% among C1+ hydrocarbons, with a maximum olefin/paraffin ratio. GdMnO3 also exhibits high conversion of CO and CO2, reaching up to 70–75% at 723 K. However, the GdFeO3 catalyst shows a lower selectivity of (C2−3= = 22%, while it exhibits a higher conversion of CO2, up to 95%, at the same temperature. Herein, we established a catalyst structure–performance relationship as a function of chemical composition. Oxygen mobilities and ratios of surface (Os) to lattice (Ol) oxygen, forms of hydrogen adsorption, formation of -CHx- radicals and their subsequent recombination to olefins are influenced by the nature of the element in the B position. This work provides valuable insights for the rational design of bimetallic catalysts for bio-syngas hydrogenation.


  • Open Access

    Synthesis, сharacterization, and сatalytic properties of GdCoO3 for dry reforming of methane

    by Regina K. Allabergenova, Daria А. Вobkova, Elizaveta M. Borodina, Tatiana A. Kryuchkova, Ekaterina B. Markova, Tatiana F. Sheshko, Nikolai N. Lobanov, Alexander G. Cherednichenko

    Perovskite oxides (ABO3) due to their high thermal stability and the ability to control the physico-chemical properties are considered as an alternative to traditional catalysts containing noble and transition metals. Herein, the recent research breakthroughs of GdCoO3 catalysts in experimental studies are summarized in detail. First, the perovskite-type GdCoO3 complex oxides were obtained by co-precipitation method with the various precipitators and were characterized by X-ray diffraction (XRD), low temperature nitrogen adsorption and IR spectroscopy. Physical and chemical analysis showed that the choice of precipitant doesn?t significantly affect the phase composition of the perovskites. The catalytic performance of gadolinium cobaltites was discussed. It was found that the use of cobaltites obtained by co-precipitation leads to the inhibition of the side reaction of the reverse steam reforming of carbon monoxide. Finally, the investigation of the used catalysts demonstrated the formation of Gd2O2CO3 and metallic cobalt, which indicates the nature of active centres: gadolinium is the centre of CO adsorption, while hydrogen chemisorption occurs on cobalt-sites.

  • Open Access

    Insights into the Reactivity of Gd2−xSrxFe2O7 (x = 0 ÷ 0.4) in CO Radical Hydrogenation

    by Tatiana F. Sheshko, Elizaveta M. Borodina, Liliya V. Yafarova, Ekaterina B. Markova, Tatiana A. Kryuchkova, Alexander G. Cherednichenko, Irina A. Zvereva, Alexander O. Terent’ev

    The effect of strontium substitution in the structure of the complex oxide Gd2SrFe2O7 on the production of light olefins by CO hydrogenation was investigated. Perovskite-type oxides Gd2−xSr1+xFe2O7 (x = 0; 0.1; 0.2; 0.3; 0.4) were synthesized by sol–gel technology and characterized by XRD, Mössbauer spectroscopy, BET specific area, acidity testing, and SEM. The experimental data revealed a correlation between the state of iron atoms, acidity, and catalytic performance. It was found that with an increase in the content of Sr2+ in the perovskite phase, the basicity of the surface and the oxygen diffusion rate increased. This contributed to the CO dissociative adsorption, formation of active carbon, and its further interaction with atomic hydrogen.


  • Open Access

    Features of the Catalytic Cracking of Propane with a Step-Wise Change PrxYb2−xZr2O7

    by Ekaterina B. Markova, Alexander G. Cherednichenko, Sofia S. Smirnova, Tatiana F. Sheshko, Tatiana A. Kryuchkova

    In this paper, the features of catalytic cracking of propane with a step-wise change in the composition of the catalyst from Pr2Zr2O7 to Yb2Zr2O7 were considered. For the research, samples of catalysts Pr2Zr2O7, (Pr0.75Yb0.25)2Zr2O7, (Pr0.5Yb0.5)2Zr2O7, (Pr0.25Yb0.75)2Zr2O7 and Yb2Zr2O7 were synthesized and analyzed. Analysis of the results from catalytic experiments showed that for the catalyst (Pr0.25Yb0.75)2Zr2O7, at a temperature of 700 °C, the conversion of propane reaches values of 100%, but for Yb2Zr2O7, this indicator decreases to 84%. The selectivity for ethylene is consistently reduced from 85% to 28% in several catalysts (Pr0.75Yb0.25)2Zr2O7 > Pr2Zr2O7 > (Pr0.5Yb0.5)2Zr2O7 >(Pr0.25Yb0.75)2Zr2O7 > Yb2Zr2O7. An increase in the number of surface adsorption centers leads to a predominant rupture of the C–C bond in the propane molecule with the formation of ethylene. When ytterbium ions are introduced into the catalyst, the amount of ethylene in the reaction products decreases, but the selectivity for propylene increases in the series Pr2Zr2O7 < (Pr0.75Yb0.25)2Zr2O7 < (Pr0.5Yb0.5)2Zr2O7 < Yb2Zr2O7 < (Pr0.25Yb0.75)2Zr2O7, which is associated with a decrease in the binding energy of carbon atoms in propane with the catalytic center during adsorption.


  • Open Access

    Influences of Co-Content on the Physico-Chemical and Catalytic Properties of Perovskite GdCoxFe1−xO3 in CO Hydrogenation

    by Elizaveta M. Borodina, Liliya V. Yafarova, Tatiana A. Kryuchkova, Tatiana F. Sheshko, Alexander G. Cherednichenko, Irina A. Zvereva

    The effect of the substitution of cobalt into the GdFeO3 perovskite structure on the selective hydrogenation of CO was investigated. A series of GdCoxFe1−xO3 (x = 0; 0.2; 0.5; 0.8; 1) samples were synthesized by sol-gel technology and characterized by XRD, BET specific area, DSC, TG, EDX and XPS. The experimental data made it possible to reveal a correlation between the state of iron and cobalt atoms, the fractions of surface and lattice oxygen, and catalytic characteristics. It has been found that varying the composition of GdCoxFe1−xO3 complex oxides leads to a change in the oxygen-metal binding energy in Gd-O-Me, the ratio of metals in various oxidation states, and the amount of surface and lattice oxygen, which affects the adsorption and catalytic characteristics of complex oxides.


  • Open Access

    Synthesis of Oxygenated Hydrocarbons from Ethanol over Sulfided KCoMo-Based Catalysts: Influence of Novel Fiber- and Powder-Activated Carbon Supports

    by Tshepo D. Dipheko, Vladimir V. Maximov, Mohamed E. Osman, Oleg L. Eliseev, Alexander G. Cherednichenko, Tatiana F. Sheshko, Victor M. Kogan

    Ethanol has become a viable feedstock for basic organic synthesis. The catalytic conversion of ethanol provides access to such chemicals as diethyl ether, ethyl acetate, and acetaldehyde. Carbonaceous materials are extensively studied as supports for heterogeneous catalysts due to their chemical and thermal stability, high surface area, and tunable texture. In this paper, ethanol conversion over K10Co3.7Mo12S-catalysts supported on novel activated carbon (AC) materials (i.e., novel powder-AC (DAS and YPK-1), fiber non-woven AC material (AHM), and fabric active sorption (TCA)) was investigated. The catalysts were prepared by the incipient wetness co-impregnation method followed by sulfidation. The catalysts were characterized by employing N2 adsorption–desorption measurements, TEM, SEM/EDX, UV–Vis spectroscopy, and XRF. Catalytic performance was assessed in a fixed-bed down-flow reactor operating at 320 °C, 2.5 MPa, and with continuous ethanol feeding in an He atmosphere. Activity is highly dependent on the support type and catalyst’s textural properties. The activity of the fiber-supported catalysts was found to be greater than the powder-supported catalysts. Ethanol conversion at T = 320 °C, P = 2.5 MPa, and GHSV = 760 L h−1 kgcat−1 increased as follows: (38.7%) KCoMoS2/YPK-1 < (49.5%) KCoMoS2/DAS < (58.2%) KCoMoS2/TCA < (67.1%) KCoMoS2/AHM. Catalysts supported by powder-AC enhanced the formation of MoS2-crystallites, whereas the high acidity of fiber-AC seemed to inhibit the formation of MoS2-crystallites. Simultaneously, a high surface area and a microporous catalytic structure enhance the formation of oxygenates from hydrocarbons. The dehydration and dehydrogenation reactions, which led to the creation of ethene and acetaldehyde, were shown to require a highly acidic catalyst, while the synthesis of ethyl acetate and higher alcohols required a less acidic catalyst.


  • Gd-Co-Fe perovskite mixed oxides as catalysts for dry reforming of methane

    by T.F. Sheshko, T.A. Kryuchkova, L.V. Yafarova, E.M. Borodina, Y.M. Serov, I.A. Zvereva, A.G. Cherednichenko


  • Higher alcohols synthesis from syngas and ethanol over KCoMoS2–catalysts supported on graphene nanosheets

    by M. E. Osman, T. D. Dipheko, V. V. Maximov, T. F. Sheshko, E. B Markova, E. A. Trusova, A.G. Cherednichenko, V. M. Kogan

    The comparative study of the catalytic behavior of K-modified CoMoS2-catalysts supported on Al2O3, carbon covered alumina (CCA) and graphene coated alumina (GCA containing 0.4, 1.2, and 1.7% of graphene) in synthesis gas and ethanol conversion (separately) to higher alcohols (HAS) and other oxygenates has been carried out. The supports and catalysts were characterized by N2 adsorption-desorption isotherms, pyridine adsorption, SEM, EDX, and TEM. In HAS from syngas, the catalyst supported on GCA materials showed better catalytic performances than the catalysts supported on alumina and carbon coated alumina (Cat-GCA > Cat-CCA > Cat-Al2O3). The spectroscopic results have established that the homogenous uniform coating of alumina by graphene nanosheets follows the order: GCA1 (1.7%) > GCA2 (1.2%) > GCA3 (0.4%). The yield of ethanol has a positive correlation with graphene wt. % in GCA. In ethanol conversion, graphene attenuate the interaction of the support/active site KCoMoS2 and with it its selectivity toward dehydrogenation/condensation reactions. The GCA1 supported catalyst exhibits low activity for the water–gas shift (WGS) reaction compared to its counterpart. Explanations of the observed phenomena have been suggested.