Alexander Genrikhovich Cherednichenko
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Alexander Genrikhovich Cherednichenko has a total of 28 co-authors. Here are the top co-authors by number of shared publications:
- Tatiana Alekseevna Kryuchkova
Department of Physical and Colloidal Chemistry, Faculty of Science, RUDN University, 6 Miklukho-Maklaya Street, 117198 Moscow, Russia
5 shared publications - Tatiana Fedorovna Sheshko
Department of Physical and Colloidal Chemistry, Faculty of Science, RUDN University, 6 Miklukho-Maklaya Street, 117198 Moscow, Russia
5 shared publications A. P. Glinushkin
Lumumba Peoples’ Friendship University of Russia, Moscow, Russia
4 shared publications- Irina Alexeevna Zvereva
Institute of Chemistry, Saint Petersburg State University, 7/9 Universitetskaya Embankment, Saint Petersburg 199034, Russia
3 shared publications A. G. Mushtakov
Patrice Lumumba Peoples’ Friendship University of Russia
2 shared publicationsA. V. Kurochkin
Patrice Lumumba Peoples’ Friendship University of Russia
2 shared publications
Latest Publications
- Open Access
Alkaline Earth Metal-Doped GdFeO3 Perovskites for Sustainable Light Olefin Production from Biomass Syngas: The Interplay of Oxygen Vacancies, Acid–Base Sites, and Catalytic Performance
The catalytic conversion of biomass-derived synthesis gas via the Fischer–Tropsch route represents a promising pathway for producing high-value products from renewable resources. This study investigates iron-containing complex oxides as catalysts for the conversion of model biomass-derived syngas. Ca-, Sr-, and Ba-doped GdFeO3 catalysts were synthesized via a sol–gel route and characterized by BET N2-physisorption, X-ray diffraction, and Fourier-transform IR spectroscopy. Their acid–base properties and oxygen non-stoichiometry were also investigated. Catalytic performance was evaluated in a fixed-bed reactor in two modes: hydrogenation of pure CO and of a CO + CO2 mixture simulating biomass-derived syngas. The results indicate that Ca, Sr, and Ba doping promotes oxygen-vacancy formation and an increase in the abundance of both acidic and basic surface sites. The effect of the promoter is not uniform with respect to activity and selectivity: Ca and Ba predominantly enhance CO and COx conversion, whereas 1% Sr primarily improves the selectivity toward light olefins at moderate conversion. All promoters suppress methane formation and enhance ethylene–propylene selectivity. Correlations are established between the surface acid–base characteristics and catalytic performance of the doped samples.
Open AccessAlkaline Earth Metal-Doped GdFeO3 Perovskites for Sustainable Light Olefin Production from Biomass Syngas: The Interplay of Oxygen Vacancies, Acid–Base Sites, and Catalytic Performance
The catalytic conversion of biomass-derived synthesis gas via the Fischer–Tropsch route represents a promising pathway for producing high-value products from renewable resources. This study investigates iron-containing complex oxides as catalysts for the conversion of model biomass-derived syngas. Ca-, Sr-, and Ba-doped GdFeO3 catalysts were synthesized via a sol–gel route and characterized by BET N2-physisorption, X-ray diffraction, and Fourier-transform IR spectroscopy. Their acid–base properties and oxygen non-stoichiometry were also investigated. Catalytic performance was evaluated in a fixed-bed reactor in two modes: hydrogenation of pure CO and of a CO + CO2 mixture simulating biomass-derived syngas. The results indicate that Ca, Sr, and Ba doping promotes oxygen-vacancy formation and an increase in the abundance of both acidic and basic surface sites. The effect of the promoter is not uniform with respect to activity and selectivity: Ca and Ba predominantly enhance CO and COx conversion, whereas 1% Sr primarily improves the selectivity toward light olefins at moderate conversion. All promoters suppress methane formation and enhance ethylene–propylene selectivity. Correlations are established between the surface acid–base characteristics and catalytic performance of the doped samples.
- 1 April 2026
- Published by Allerton Press in Solid Fuel Chemistry
- Vol. 60 (2) , 113-118
Investigation of the Effect of Acid Modification of AG-3 Activated Carbon on the Process of Acetone Vapor Adsorption
Air purification from volatile organic compounds (VOCs) remains a serious problem of maintaining public health and environmental safety due to their toxic
- 1 April 2026
- Published by Allerton Press in Solid Fuel Chemistry
- Vol. 60 (2) , 113-118
Investigation of the Effect of Acid Modification of AG-3 Activated Carbon on the Process of Acetone Vapor Adsorption
Air purification from volatile organic compounds (VOCs) remains a serious problem of maintaining public health and environmental safety due to their toxic
- 1 April 2026
- Published by Allerton Press in Solid Fuel Chemistry
- Vol. 60 (2) , 119-125
Changing the Surface Properties of Activated Carbons to Improve Acetonitrile Adsorption
The efficiency of adsorption of polar organic solvents by activated carbon is determined by the chemical and textural properties of its surface. Chemical m
- 1 April 2026
- Published by Allerton Press in Solid Fuel Chemistry
- Vol. 60 (2) , 119-125
Changing the Surface Properties of Activated Carbons to Improve Acetonitrile Adsorption
The efficiency of adsorption of polar organic solvents by activated carbon is determined by the chemical and textural properties of its surface. Chemical m
- Open Access
Hydrogenation of Simulated Bio-Syngas in the Presence of GdBO3 (B = Fe, Co, Mn) Perovskite-Type Oxides
Direct light olefin synthesis from bio-syngas hydrogenation is a promising pathway to decarbonize the chemical industry. The present study is devoted to the investigation of co-hydrogenation of carbon oxides in the presence of complex systems with the perovskite structure GdBO3 (B = Fe, Mn, Co). The catalyst samples were synthesized by sol-gel technology and characterized by XRD, XPS, BET and TPR. It was found that the Fe/Mn-containing samples exhibited efficient catalysis of the hydrogenation of simulated bio-syngas to light hydrocarbons. The GdMnO3 catalyst exhibits selectivity for C2–C3 light olefins of up to 37% among C1+ hydrocarbons, with a maximum olefin/paraffin ratio. GdMnO3 also exhibits high conversion of CO and CO2, reaching up to 70–75% at 723 K. However, the GdFeO3 catalyst shows a lower selectivity of ( = 22%, while it exhibits a higher conversion of CO2, up to 95%, at the same temperature. Herein, we established a catalyst structure–performance relationship as a function of chemical composition. Oxygen mobilities and ratios of surface (Os) to lattice (Ol) oxygen, forms of hydrogen adsorption, formation of -CHx- radicals and their subsequent recombination to olefins are influenced by the nature of the element in the B position. This work provides valuable insights for the rational design of bimetallic catalysts for bio-syngas hydrogenation.Open AccessHydrogenation of Simulated Bio-Syngas in the Presence of GdBO3 (B = Fe, Co, Mn) Perovskite-Type Oxides
Direct light olefin synthesis from bio-syngas hydrogenation is a promising pathway to decarbonize the chemical industry. The present study is devoted to the investigation of co-hydrogenation of carbon oxides in the presence of complex systems with the perovskite structure GdBO3 (B = Fe, Mn, Co). The catalyst samples were synthesized by sol-gel technology and characterized by XRD, XPS, BET and TPR. It was found that the Fe/Mn-containing samples exhibited efficient catalysis of the hydrogenation of simulated bio-syngas to light hydrocarbons. The GdMnO3 catalyst exhibits selectivity for C2–C3 light olefins of up to 37% among C1+ hydrocarbons, with a maximum olefin/paraffin ratio. GdMnO3 also exhibits high conversion of CO and CO2, reaching up to 70–75% at 723 K. However, the GdFeO3 catalyst shows a lower selectivity of ( = 22%, while it exhibits a higher conversion of CO2, up to 95%, at the same temperature. Herein, we established a catalyst structure–performance relationship as a function of chemical composition. Oxygen mobilities and ratios of surface (Os) to lattice (Ol) oxygen, forms of hydrogen adsorption, formation of -CHx- radicals and their subsequent recombination to olefins are influenced by the nature of the element in the B position. This work provides valuable insights for the rational design of bimetallic catalysts for bio-syngas hydrogenation. - 27 December 2024
- Published by The Russian Academy of Sciences in Rossijskaâ selʹskohozâjstvennaâ nauka
- No. 5,p. 33-40
Extraction of heavy metal ions from aqueous solutions by frame sorbents based on benzene-1,3,5-tricarboxylate (MBTC) and benzene-1,4-dicarboxylates (MB DC) of various metals
Pollution of soils and water sources with heavy metals leads to negative consequences for the environment associated with disruption of ecosystem balance, harm to the health of living organisms and humans. To solve this problem, organometallic frame sorbents capable of efficiently extracting heavy metal ions from aqueous solutions have been synthesized. During the conducted research, the regularities of the adsorption of cadmium, lead, copper, cobalt and nickel ions were studied using synthesized frame sorbents based on benzene-1,3,5-tricarboxylates (MBTC) and benzene-1,4-dicarboxylates (MBDC). The identification analysis performed on diffractograms of CoBTC and NiBTC powders showed the presence of structures [Co3(BTC)2·12H2O] and [Ni3(BTC)2·12H2O]. Unlike NiBTC, NiBDC dicarboxylate crystallizes in triclinic syngony (spatial group P1¯, Z = 1) and corresponds to the crystal structure [Ni3(OH)2(BDC)2··4H2O], the sample of the CuBTC compound crystallizes in cubic symmetry with the space group Fm3¯m (Z = 16) and corresponds to the crystal structure [Cu3(BTC)2·3H2O], and the CuBDC compound has a structure belonging to the monoclinic symmetry. The results of the analysis of isotherms of low-temperature nitrogen adsorption using synthesized MOFs made it possible to determine important textural characteristics of sorbents. It was noted that a strong adsorbate-adsorbent interaction is realized for CoBTC in the micropore region. It is shown that the specific surface area of synthesized sorbents, calculated by the Brunnauer-Emmett-Teller (BET) method, varies widely. Thus, for CoBTC and NiBTC compounds, it was 276.0 and 9.0 m2/g, respectively. The noted differences are due to the presence of a large number of micropores in the sorbent CoBTC. In most cases, the kinetic patterns of the adsorption of heavy metal ions can be described by a pseudo-second-order equation. The only example of the process proceeding according to the kinetic equation of the pseudo-first order is the adsorption of copper ions on the NiBDC sorbent. It is noted that cobalt, nickel and copper ions are better absorbed by sorbents containing the corresponding ions of the same name according to the Paneta-Faience rule. The linear relationship found between the sorption capacity and the logarithm of the ratio of the radius of ions to their electronegativity implies that the mechanism of adsorption of metal ions on MOFs is determined by the physicochemical properties of the ions themselves. The developed organometallic frame compounds can be effectively used in technologies for purification of water resources from toxic heavy metal ions.
- 27 December 2024
- Published by The Russian Academy of Sciences in Rossijskaâ selʹskohozâjstvennaâ nauka
- No. 5,p. 33-40
Extraction of heavy metal ions from aqueous solutions by frame sorbents based on benzene-1,3,5-tricarboxylate (MBTC) and benzene-1,4-dicarboxylates (MB DC) of various metals
Pollution of soils and water sources with heavy metals leads to negative consequences for the environment associated with disruption of ecosystem balance, harm to the health of living organisms and humans. To solve this problem, organometallic frame sorbents capable of efficiently extracting heavy metal ions from aqueous solutions have been synthesized. During the conducted research, the regularities of the adsorption of cadmium, lead, copper, cobalt and nickel ions were studied using synthesized frame sorbents based on benzene-1,3,5-tricarboxylates (MBTC) and benzene-1,4-dicarboxylates (MBDC). The identification analysis performed on diffractograms of CoBTC and NiBTC powders showed the presence of structures [Co3(BTC)2·12H2O] and [Ni3(BTC)2·12H2O]. Unlike NiBTC, NiBDC dicarboxylate crystallizes in triclinic syngony (spatial group P1¯, Z = 1) and corresponds to the crystal structure [Ni3(OH)2(BDC)2··4H2O], the sample of the CuBTC compound crystallizes in cubic symmetry with the space group Fm3¯m (Z = 16) and corresponds to the crystal structure [Cu3(BTC)2·3H2O], and the CuBDC compound has a structure belonging to the monoclinic symmetry. The results of the analysis of isotherms of low-temperature nitrogen adsorption using synthesized MOFs made it possible to determine important textural characteristics of sorbents. It was noted that a strong adsorbate-adsorbent interaction is realized for CoBTC in the micropore region. It is shown that the specific surface area of synthesized sorbents, calculated by the Brunnauer-Emmett-Teller (BET) method, varies widely. Thus, for CoBTC and NiBTC compounds, it was 276.0 and 9.0 m2/g, respectively. The noted differences are due to the presence of a large number of micropores in the sorbent CoBTC. In most cases, the kinetic patterns of the adsorption of heavy metal ions can be described by a pseudo-second-order equation. The only example of the process proceeding according to the kinetic equation of the pseudo-first order is the adsorption of copper ions on the NiBDC sorbent. It is noted that cobalt, nickel and copper ions are better absorbed by sorbents containing the corresponding ions of the same name according to the Paneta-Faience rule. The linear relationship found between the sorption capacity and the logarithm of the ratio of the radius of ions to their electronegativity implies that the mechanism of adsorption of metal ions on MOFs is determined by the physicochemical properties of the ions themselves. The developed organometallic frame compounds can be effectively used in technologies for purification of water resources from toxic heavy metal ions.
- 1 December 2024
- Published by Allerton Press in Russian Agricultural Sciences
- Vol. 50 (6) , 746-753
Extraction of Heavy Metal Ions from Aqueous Solutions by Frame Sorbents Based on Benzene-1,3,5-tricarboxylate (MBTC) and Benzene-1,4-dicarboxylates (MBDC) of Various Metals
Pollution of soils and water sources with heavy metals exerts negative impact on the environment related to the disturbances of ecosystem balance and harm
- 1 December 2024
- Published by Allerton Press in Russian Agricultural Sciences
- Vol. 50 (6) , 746-753
Extraction of Heavy Metal Ions from Aqueous Solutions by Frame Sorbents Based on Benzene-1,3,5-tricarboxylate (MBTC) and Benzene-1,4-dicarboxylates (MBDC) of Various Metals
Pollution of soils and water sources with heavy metals exerts negative impact on the environment related to the disturbances of ecosystem balance and harm
- Open Access
Insights into the Reactivity of Gd2−xSrxFe2O7 (x = 0 ÷ 0.4) in CO Radical Hydrogenation
The effect of strontium substitution in the structure of the complex oxide Gd2SrFe2O7 on the production of light olefins by CO hydrogenation was investigated. Perovskite-type oxides Gd2−xSr1+xFe2O7 (x = 0; 0.1; 0.2; 0.3; 0.4) were synthesized by sol–gel technology and characterized by XRD, Mössbauer spectroscopy, BET specific area, acidity testing, and SEM. The experimental data revealed a correlation between the state of iron atoms, acidity, and catalytic performance. It was found that with an increase in the content of Sr2+ in the perovskite phase, the basicity of the surface and the oxygen diffusion rate increased. This contributed to the CO dissociative adsorption, formation of active carbon, and its further interaction with atomic hydrogen.
Open AccessInsights into the Reactivity of Gd2−xSrxFe2O7 (x = 0 ÷ 0.4) in CO Radical Hydrogenation
The effect of strontium substitution in the structure of the complex oxide Gd2SrFe2O7 on the production of light olefins by CO hydrogenation was investigated. Perovskite-type oxides Gd2−xSr1+xFe2O7 (x = 0; 0.1; 0.2; 0.3; 0.4) were synthesized by sol–gel technology and characterized by XRD, Mössbauer spectroscopy, BET specific area, acidity testing, and SEM. The experimental data revealed a correlation between the state of iron atoms, acidity, and catalytic performance. It was found that with an increase in the content of Sr2+ in the perovskite phase, the basicity of the surface and the oxygen diffusion rate increased. This contributed to the CO dissociative adsorption, formation of active carbon, and its further interaction with atomic hydrogen.
- Open Access
Features of the Catalytic Cracking of Propane with a Step-Wise Change PrxYb2−xZr2O7
In this paper, the features of catalytic cracking of propane with a step-wise change in the composition of the catalyst from Pr2Zr2O7 to Yb2Zr2O7 were considered. For the research, samples of catalysts Pr2Zr2O7, (Pr0.75Yb0.25)2Zr2O7, (Pr0.5Yb0.5)2Zr2O7, (Pr0.25Yb0.75)2Zr2O7 and Yb2Zr2O7 were synthesized and analyzed. Analysis of the results from catalytic experiments showed that for the catalyst (Pr0.25Yb0.75)2Zr2O7, at a temperature of 700 °C, the conversion of propane reaches values of 100%, but for Yb2Zr2O7, this indicator decreases to 84%. The selectivity for ethylene is consistently reduced from 85% to 28% in several catalysts (Pr0.75Yb0.25)2Zr2O7 > Pr2Zr2O7 > (Pr0.5Yb0.5)2Zr2O7 >(Pr0.25Yb0.75)2Zr2O7 > Yb2Zr2O7. An increase in the number of surface adsorption centers leads to a predominant rupture of the C–C bond in the propane molecule with the formation of ethylene. When ytterbium ions are introduced into the catalyst, the amount of ethylene in the reaction products decreases, but the selectivity for propylene increases in the series Pr2Zr2O7 < (Pr0.75Yb0.25)2Zr2O7 < (Pr0.5Yb0.5)2Zr2O7 < Yb2Zr2O7 < (Pr0.25Yb0.75)2Zr2O7, which is associated with a decrease in the binding energy of carbon atoms in propane with the catalytic center during adsorption.
Open AccessFeatures of the Catalytic Cracking of Propane with a Step-Wise Change PrxYb2−xZr2O7
In this paper, the features of catalytic cracking of propane with a step-wise change in the composition of the catalyst from Pr2Zr2O7 to Yb2Zr2O7 were considered. For the research, samples of catalysts Pr2Zr2O7, (Pr0.75Yb0.25)2Zr2O7, (Pr0.5Yb0.5)2Zr2O7, (Pr0.25Yb0.75)2Zr2O7 and Yb2Zr2O7 were synthesized and analyzed. Analysis of the results from catalytic experiments showed that for the catalyst (Pr0.25Yb0.75)2Zr2O7, at a temperature of 700 °C, the conversion of propane reaches values of 100%, but for Yb2Zr2O7, this indicator decreases to 84%. The selectivity for ethylene is consistently reduced from 85% to 28% in several catalysts (Pr0.75Yb0.25)2Zr2O7 > Pr2Zr2O7 > (Pr0.5Yb0.5)2Zr2O7 >(Pr0.25Yb0.75)2Zr2O7 > Yb2Zr2O7. An increase in the number of surface adsorption centers leads to a predominant rupture of the C–C bond in the propane molecule with the formation of ethylene. When ytterbium ions are introduced into the catalyst, the amount of ethylene in the reaction products decreases, but the selectivity for propylene increases in the series Pr2Zr2O7 < (Pr0.75Yb0.25)2Zr2O7 < (Pr0.5Yb0.5)2Zr2O7 < Yb2Zr2O7 < (Pr0.25Yb0.75)2Zr2O7, which is associated with a decrease in the binding energy of carbon atoms in propane with the catalytic center during adsorption.
- 22 December 2022
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 24, 84-88
Application of catalytic systems containing iron in the process of propane cracking
Composite catalysts containing various forms of metallic or oxide iron ((Fe0 or FexOy, Fe3+) in combination with an inert matrix (γ-Al2O3) were obtained and their catalytic ability in the propane cracking reaction was studied. It is shown that for pure aluminum oxide, no catalytic effect is observed in this reaction. The synthesis methods implemented in this work allowed us to obtain various catalytic centers that can effectively carry out electron transfer by changing the degree of iron oxidation during the transformation of the initial substances into the target reaction products. It is proved that the use of iron nano-particles for formation of catalytic centers does not lead to a noticeable improvement in the technological yield of propylene compared to the Fe3+/Al2O3 material. Use of an inert oxide substrate (γ-Al2O3) and various iron compounds makes it possible to create a bifunctional catalytic center containing Fe(III) and Al(III) ions, which provides an energetically favorable interaction with the propane molecule and further breaking of the strongest C-H bond at a primary carbon atom. The synthesized catalytic systems can be used for thermocatalytic processes in natural gas processing instead of catalysts based on noble metals. This publication has been supported by the RUDN University Scientific Projects Grant System, project № 021521-2-174.
- 22 December 2022
- Published by Ore and Metals Publishing House in CIS Iron and Steel Review
- Vol. 24, 84-88
Application of catalytic systems containing iron in the process of propane cracking
Composite catalysts containing various forms of metallic or oxide iron ((Fe0 or FexOy, Fe3+) in combination with an inert matrix (γ-Al2O3) were obtained and their catalytic ability in the propane cracking reaction was studied. It is shown that for pure aluminum oxide, no catalytic effect is observed in this reaction. The synthesis methods implemented in this work allowed us to obtain various catalytic centers that can effectively carry out electron transfer by changing the degree of iron oxidation during the transformation of the initial substances into the target reaction products. It is proved that the use of iron nano-particles for formation of catalytic centers does not lead to a noticeable improvement in the technological yield of propylene compared to the Fe3+/Al2O3 material. Use of an inert oxide substrate (γ-Al2O3) and various iron compounds makes it possible to create a bifunctional catalytic center containing Fe(III) and Al(III) ions, which provides an energetically favorable interaction with the propane molecule and further breaking of the strongest C-H bond at a primary carbon atom. The synthesized catalytic systems can be used for thermocatalytic processes in natural gas processing instead of catalysts based on noble metals. This publication has been supported by the RUDN University Scientific Projects Grant System, project № 021521-2-174.
- Open Access
Influences of Co-Content on the Physico-Chemical and Catalytic Properties of Perovskite GdCoxFe1−xO3 in CO Hydrogenation
The effect of the substitution of cobalt into the GdFeO3 perovskite structure on the selective hydrogenation of CO was investigated. A series of GdCoxFe1−xO3 (x = 0; 0.2; 0.5; 0.8; 1) samples were synthesized by sol-gel technology and characterized by XRD, BET specific area, DSC, TG, EDX and XPS. The experimental data made it possible to reveal a correlation between the state of iron and cobalt atoms, the fractions of surface and lattice oxygen, and catalytic characteristics. It has been found that varying the composition of GdCoxFe1−xO3 complex oxides leads to a change in the oxygen-metal binding energy in Gd-O-Me, the ratio of metals in various oxidation states, and the amount of surface and lattice oxygen, which affects the adsorption and catalytic characteristics of complex oxides.
Open AccessInfluences of Co-Content on the Physico-Chemical and Catalytic Properties of Perovskite GdCoxFe1−xO3 in CO Hydrogenation
The effect of the substitution of cobalt into the GdFeO3 perovskite structure on the selective hydrogenation of CO was investigated. A series of GdCoxFe1−xO3 (x = 0; 0.2; 0.5; 0.8; 1) samples were synthesized by sol-gel technology and characterized by XRD, BET specific area, DSC, TG, EDX and XPS. The experimental data made it possible to reveal a correlation between the state of iron and cobalt atoms, the fractions of surface and lattice oxygen, and catalytic characteristics. It has been found that varying the composition of GdCoxFe1−xO3 complex oxides leads to a change in the oxygen-metal binding energy in Gd-O-Me, the ratio of metals in various oxidation states, and the amount of surface and lattice oxygen, which affects the adsorption and catalytic characteristics of complex oxides.