Mohammad Shojaee
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Mohammad Shojaee has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Elliot Biro
University of Waterloo
10 shared publications - Abdelbaset R. H. Midawi
Centre for Advanced Materials Joining, Department of Mechanical & Mechatronics Engineering, University of Waterloo
8 shared publications - Hassan Ghassemi-Armaki
General Motors R&D, Manufacturing Systems Research Laboratory
7 shared publications - Oleksii Sherepenko
Institute of Materials and Joining Technology, Otto von Guericke University Magdeburg, 39106 Magdeburg, Germany
4 shared publications - Dileep Chandran Ramachandran
University of Waterloo
3 shared publications - JiUng Kim
University of Waterloo
3 shared publications
Latest Publications
- Open Access
- 1 October 2026
- Published by Elsevier in SSRN Electronic Journal
Kinetics of Liquid Metal Embrittlement Crack on Propagation Stage During Resistance Spot Welding Investigated through In-Situ Perspective
Understanding the mechanism of liquid-metal embrittlement cracking during resistance spot welding is crucial for improving weld joint quality in the automotive manufacturing process. Research using finite element analysis has shown that thermal stress at the weld shoulder is the primary factor contributing to liquid-metal embrittlement cracks. Specifically, the instantaneous temperature drop, caused by the mechanical collapse between the substrates and electrodes, induces thermal shock, which in-turn generates thermal stress. Half-sectioned resistance spot welding is used to implement real-time monitoring of the liquid-metal embrittlement cracking, revealing that crack growth occurs in two phases: initiation and propagation. Furthermore, half-sectioned spot-welding empirically demonstrates that thermal stress plays a critical role in initiating liquid-metal embrittlement cracks. However, the crack kinetics during the propagation phase remain unclear. This study provides a comprehensive understanding of the kinetics of crack propagation. Moreover, a proposed statistical model predicts the crack growth rate and crack length with R2 values of 0.899 and 0.583, respectively. While the model for crack length prediction requires further refinement to achieve higher accuracy, the significant model terms indicate the key factors influencing crack propagation: the crack momentum, thermal stress at the crack tip, and damping effects at the crack tip (from constraint of surrounding material). This comprehensive understanding of crack propagation kinetics provides an innovative insight into developing liquid-metal embrittlement-free spot-weld joints in the automotive industry by identifying the crack propagation mechanism, an area that has not been thoroughly explored in previous research.
- 1 October 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessKinetics of Liquid Metal Embrittlement Crack on Propagation Stage During Resistance Spot Welding Investigated through In-Situ Perspective
Understanding the mechanism of liquid-metal embrittlement cracking during resistance spot welding is crucial for improving weld joint quality in the automotive manufacturing process. Research using finite element analysis has shown that thermal stress at the weld shoulder is the primary factor contributing to liquid-metal embrittlement cracks. Specifically, the instantaneous temperature drop, caused by the mechanical collapse between the substrates and electrodes, induces thermal shock, which in-turn generates thermal stress. Half-sectioned resistance spot welding is used to implement real-time monitoring of the liquid-metal embrittlement cracking, revealing that crack growth occurs in two phases: initiation and propagation. Furthermore, half-sectioned spot-welding empirically demonstrates that thermal stress plays a critical role in initiating liquid-metal embrittlement cracks. However, the crack kinetics during the propagation phase remain unclear. This study provides a comprehensive understanding of the kinetics of crack propagation. Moreover, a proposed statistical model predicts the crack growth rate and crack length with R2 values of 0.899 and 0.583, respectively. While the model for crack length prediction requires further refinement to achieve higher accuracy, the significant model terms indicate the key factors influencing crack propagation: the crack momentum, thermal stress at the crack tip, and damping effects at the crack tip (from constraint of surrounding material). This comprehensive understanding of crack propagation kinetics provides an innovative insight into developing liquid-metal embrittlement-free spot-weld joints in the automotive industry by identifying the crack propagation mechanism, an area that has not been thoroughly explored in previous research.
- Open Access
- 2 May 2026
- Published by Elsevier in SSRN Electronic Journal
Critical Stress Required for Liquid Metal Embrittlement (LME) Crack Initiation: Damage Mapping for LME Cracks in Resistance Spot Welding (RSW) through In-Situ Monitoring
Liquid metal embrittlement (LME) poses a significant challenge in the automotive industry because it can cause circumferential surface cracks adjacent to the weldment, especially when resistance spot welding (RSW) is used on third-generation advanced high-strength steel (3G-AHSS). Numerous studies aim to predict the onset of LME cracks during welding. The Gleeble test is often used to understand the LME crack mechanism, such as identifying the critical stress levels at various temperatures. An investigation developed a finite element method (FEM) to predict LME cracks; however, validation against actual welding conditions remains limited. This research assesses the critical stress during actual welding within a temperature range of 594 °C to 786 °C and compares it with results from the Gleeble test. Findings indicate that the critical stress obtained from Gleeble tests directly correlates the critical stress necessary to initiate LME crack during welding.
- 2 May 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessCritical Stress Required for Liquid Metal Embrittlement (LME) Crack Initiation: Damage Mapping for LME Cracks in Resistance Spot Welding (RSW) through In-Situ Monitoring
Liquid metal embrittlement (LME) poses a significant challenge in the automotive industry because it can cause circumferential surface cracks adjacent to the weldment, especially when resistance spot welding (RSW) is used on third-generation advanced high-strength steel (3G-AHSS). Numerous studies aim to predict the onset of LME cracks during welding. The Gleeble test is often used to understand the LME crack mechanism, such as identifying the critical stress levels at various temperatures. An investigation developed a finite element method (FEM) to predict LME cracks; however, validation against actual welding conditions remains limited. This research assesses the critical stress during actual welding within a temperature range of 594 °C to 786 °C and compares it with results from the Gleeble test. Findings indicate that the critical stress obtained from Gleeble tests directly correlates the critical stress necessary to initiate LME crack during welding.
- Open Access
- 30 March 2026
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 351
Microstructural heterogeneity and strength mismatch in laser powder bed fusion maraging steel tooling repaired by laser direct energy deposition
- 30 March 2026
- Published by Elsevier in Journal of Materials Processing Technology
- Vol. 351
Open AccessMicrostructural heterogeneity and strength mismatch in laser powder bed fusion maraging steel tooling repaired by laser direct energy deposition
- Open Access
- 25 October 2025
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 31 (1) , 3-11
A novel in-situ temperature measurement method for liquid metal embrittlement cracking analysis
Liquid metal embrittlement poses a challenge in resistance spot welding of zinc-coated advanced high-strength steels. Liquid metal embrittlement often leads to surface cracking, which degrades the mechanical properties of the welded joints. Therefore, understanding the liquid metal embrittlement cracking behaviour and developing mitigation strategies are essential. This study proposes the implementation of an infrared camera for in-situ temperature measurement during welding. Given the substantial variation in surface emissivity during resistance spot welding, a temperature correction model is necessary at critical temperatures associated with liquid metal embrittlement onset. This study proposes a temperature correction model that achieves an 85% improvement in accuracy with a 20 °C error. The model is tailored for quantitative analysis of liquid metal embrittlement cracking, utilising the Boltzmann sigmoidal and BiDoesResp functions.
- 25 October 2025
- Published by SAGE Publications in Science and Technology of Welding and Joining
- Vol. 31 (1) , 3-11
Open AccessA novel in-situ temperature measurement method for liquid metal embrittlement cracking analysis
Liquid metal embrittlement poses a challenge in resistance spot welding of zinc-coated advanced high-strength steels. Liquid metal embrittlement often leads to surface cracking, which degrades the mechanical properties of the welded joints. Therefore, understanding the liquid metal embrittlement cracking behaviour and developing mitigation strategies are essential. This study proposes the implementation of an infrared camera for in-situ temperature measurement during welding. Given the substantial variation in surface emissivity during resistance spot welding, a temperature correction model is necessary at critical temperatures associated with liquid metal embrittlement onset. This study proposes a temperature correction model that achieves an 85% improvement in accuracy with a 20 °C error. The model is tailored for quantitative analysis of liquid metal embrittlement cracking, utilising the Boltzmann sigmoidal and BiDoesResp functions.
- 10 February 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (18) , 20963-20982
Investigating the Mechanical Properties and Failure Behavior of Groups of Resistance Spot Welds under Tensile-Bending Loading Conditions
- 10 February 2025
- Published by Springer Nature in Journal of Materials Engineering and Performance
- Vol. 34 (18) , 20963-20982
Investigating the Mechanical Properties and Failure Behavior of Groups of Resistance Spot Welds under Tensile-Bending Loading Conditions
- 19 March 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 132 (1-2) , 943-965
An experimental methodology to characterize load-based fracture models of third generation advanced high strength steel resistance spot welds
- 19 March 2024
- Published by Springer Nature in The International Journal of Advanced Manufacturing Technology
- Vol. 132 (1-2) , 943-965
An experimental methodology to characterize load-based fracture models of third generation advanced high strength steel resistance spot welds
- Open Access
Prediction of Mechanical Properties in the Sub-Critical Heat Affected Zone of AHSS Spot Welds Using Gleeble Thermal Simulator and Hollomon-Jaffe Model
Measuring the mechanical properties of weld Heat Affected Zone (HAZ) remains one of the main challenges in the failure analysis of spot-welded components. Due to the small size of the HAZ and variation in the temperature history, different peak temperatures and cooling rates impose a range of phase transformations across the resistance spot weld. Among the HAZ sub-regions, the sub-critical HAZ (SCHAZ), which experiences temperatures below AC1 (350–650 °C), usually shows a reduction in the hardness in most of the modern AHSS grades due to the martensite tempering phenomenon. SCHAZ softening may lead to strain localization during loading. Therefore, it is important to characterize the local properties of the SCHAZ region to accurately predict RSW failure. However, it is not feasible to extract standard mechanical test specimens out of the SCHAZ of the spot-welded structure due to its small size. In this work, the SCHAZ of the spot weld for two AHSS, 3G-980 and PHS-1500, was simulated using a Gleeble® (Dynamic Systems Inc., 323 NY-355, Poestenkill, NY 12140, USA) 3500 thermo-mechanical simulator. An in-situ high-speed IR thermal camera was used to measure the entire temperature field during the Gleeble heat-treatment process, which allowed for the visualization of the temperature distribution in the gauge area. The temperature and hardness data were fit to a Hollomon-Jaffe (HJ) model, which enables hardness prediction in the SCHAZ at any given temperature and time. Using the HJ model, a heat treatment schedule for each material was chosen to produce samples with hardness and microstructure matching the SCHAZ within actual spot weld coupons. Tensile specimens were machined from the coupons heat treated using simulated heat treatment schedules, and mechanical testing was performed. The results showed that the 3G-980 SCHAZ has a slight increase in yield strength and tensile strength, compared to the base metal, due to the formation of fine carbides within the microstructure. In contrast, the SCHAZ of PHS-1500 showed a significant reduction in the yield and tensile strength with yield point elongation behavior due to the reduction of the martensite phase and an increase in carbide formation due to the tempering process.
Open AccessPrediction of Mechanical Properties in the Sub-Critical Heat Affected Zone of AHSS Spot Welds Using Gleeble Thermal Simulator and Hollomon-Jaffe Model
Measuring the mechanical properties of weld Heat Affected Zone (HAZ) remains one of the main challenges in the failure analysis of spot-welded components. Due to the small size of the HAZ and variation in the temperature history, different peak temperatures and cooling rates impose a range of phase transformations across the resistance spot weld. Among the HAZ sub-regions, the sub-critical HAZ (SCHAZ), which experiences temperatures below AC1 (350–650 °C), usually shows a reduction in the hardness in most of the modern AHSS grades due to the martensite tempering phenomenon. SCHAZ softening may lead to strain localization during loading. Therefore, it is important to characterize the local properties of the SCHAZ region to accurately predict RSW failure. However, it is not feasible to extract standard mechanical test specimens out of the SCHAZ of the spot-welded structure due to its small size. In this work, the SCHAZ of the spot weld for two AHSS, 3G-980 and PHS-1500, was simulated using a Gleeble® (Dynamic Systems Inc., 323 NY-355, Poestenkill, NY 12140, USA) 3500 thermo-mechanical simulator. An in-situ high-speed IR thermal camera was used to measure the entire temperature field during the Gleeble heat-treatment process, which allowed for the visualization of the temperature distribution in the gauge area. The temperature and hardness data were fit to a Hollomon-Jaffe (HJ) model, which enables hardness prediction in the SCHAZ at any given temperature and time. Using the HJ model, a heat treatment schedule for each material was chosen to produce samples with hardness and microstructure matching the SCHAZ within actual spot weld coupons. Tensile specimens were machined from the coupons heat treated using simulated heat treatment schedules, and mechanical testing was performed. The results showed that the 3G-980 SCHAZ has a slight increase in yield strength and tensile strength, compared to the base metal, due to the formation of fine carbides within the microstructure. In contrast, the SCHAZ of PHS-1500 showed a significant reduction in the yield and tensile strength with yield point elongation behavior due to the reduction of the martensite phase and an increase in carbide formation due to the tempering process.
- Open Access
- 24 July 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 26, 22-31
Mitigating the influence of industrially relevant disturbances on LME severity of dissimilar resistance spot welded advanced high-strength steels
- 24 July 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 26, 22-31
Open AccessMitigating the influence of industrially relevant disturbances on LME severity of dissimilar resistance spot welded advanced high-strength steels
- Open Access
Effect of Liquid Metal Embrittlement Indent Cracks on Zinc Coated 3rd Generation AHSS Mechanical Performance
Third-generation advanced high-strength steels (3G-AHSS) are typically galvanized to prevent corrosion of the outer body structure. However, the zinc coating on the surface, combined with the locally elevated temperatures generated during the resistance spot welding (RSW) process, can provide the prerequisites for liquid metal embrittlement (LME). This work uses two strategies to control LME crack formation: current pulsation and varying the electrode geometry. These two methods were compared to a baseline welding schedule for a 3G-980-GI coated AHSS. The effectiveness of each method was discussed in terms of the overall weld cracking index and local cracking index. The results showed that increasing the current pulses results in a slower energy input into the weld, which can help to reduce LME crack formation. Introducing more pulses (five to seven pulses) reduced LME crack formation while maintaining the same welding time. Regarding the electrode geometry, the results showed an increase in LME cracking index for currents below the expulsion level Imax-10% when the electrode face diameter increased, whereas at the current level Imax-200A, the electrode radius was the most important factor to control LME crack index. For the current level above the expulsion, Imax+10%, a drastic decrease in the LME cracking index was observed when a large electrode surface diameter was used. The electrode radius was not a significant factor in controlling LME. The mechanical properties of selected conditions were examined using the lap shear test and the results showed no significant effect of LME cracks on the shear tensile strength. The location of the failure indicated that most of the cracks are located in the indented area (type A), which does not influence the lap shear strength.
Open AccessEffect of Liquid Metal Embrittlement Indent Cracks on Zinc Coated 3rd Generation AHSS Mechanical Performance
Third-generation advanced high-strength steels (3G-AHSS) are typically galvanized to prevent corrosion of the outer body structure. However, the zinc coating on the surface, combined with the locally elevated temperatures generated during the resistance spot welding (RSW) process, can provide the prerequisites for liquid metal embrittlement (LME). This work uses two strategies to control LME crack formation: current pulsation and varying the electrode geometry. These two methods were compared to a baseline welding schedule for a 3G-980-GI coated AHSS. The effectiveness of each method was discussed in terms of the overall weld cracking index and local cracking index. The results showed that increasing the current pulses results in a slower energy input into the weld, which can help to reduce LME crack formation. Introducing more pulses (five to seven pulses) reduced LME crack formation while maintaining the same welding time. Regarding the electrode geometry, the results showed an increase in LME cracking index for currents below the expulsion level Imax-10% when the electrode face diameter increased, whereas at the current level Imax-200A, the electrode radius was the most important factor to control LME crack index. For the current level above the expulsion, Imax+10%, a drastic decrease in the LME cracking index was observed when a large electrode surface diameter was used. The electrode radius was not a significant factor in controlling LME. The mechanical properties of selected conditions were examined using the lap shear test and the results showed no significant effect of LME cracks on the shear tensile strength. The location of the failure indicated that most of the cracks are located in the indented area (type A), which does not influence the lap shear strength.
- Open Access
- 22 January 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 23, 1458-1470
Influence of expulsion and heat extraction resulting from changes to electrode force on liquid metal embrittlement during resistance spot welding
- 22 January 2023
- Published by Elsevier in Journal of Materials Research and Technology
- Vol. 23, 1458-1470
Open AccessInfluence of expulsion and heat extraction resulting from changes to electrode force on liquid metal embrittlement during resistance spot welding