Samgopiraj Velraj
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Samgopiraj Velraj has a total of 13 co-authors. Here are the top co-authors by number of shared publications:
- Damilola Ayotunde Daramola
Northeastern University
2 shared publications - Jason Trembly
Ohio Univ., Athens, OH (United States)
2 shared publications - Jiahong Zhu
Department of Mechanical Engineering, Technological University, Cookeville, TN 38505, USA
2 shared publications A.K. Estes
Department of Mechanical Engineering, Tennessee Technological University, Cookeville, TN, 38501, USA
1 shared publication- Ahmad Abu Hajer
Institute for Sustainable Energy and the Environment, Department of Chemical and Biomolecular Engineering, Athens, OH 45701, United States of America
1 shared publication - Andrew Kasick
Institute for Sustainable Energy and the Environment, Russ College of Engineering and Technology
1 shared publication
Latest Publications
- Open Access
Effect of the Dopant and Carbonaceous Support of the Perovskite Type LaNi0.9X0.1O3 (X = Fe, Mn or Pd) on the Performance of Zn–Air Battery
The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are two processes that occur during the operation of the cathodic electrode in Zn–Air batteries, which enable the integration of alternative energy sources into electrical energy distribution systems. Transition metal oxides, such as perovskites based on LaNiO3, are promising electrocatalysts for the ORR and OER in alkaline medium due to their versatile structure, allowing for the substitution of certain atoms with dopants, which enhances the catalytic activity for both reactions. This work reports an electrochemical study of the catalytic activity toward ORR and OER of perovskite catalysts (LaNiO3 doped with transition metals (Fe, Mn, or Pd)) in the presence of carbon-based materials as supports (multiwalled carbon nanotubes (MWCNT), graphene oxide nanosheets (GO), and graphitic carbon (C)). The results revealed interesting catalytic properties in both reactions, particularly La(Ni0.9Pd0.1)O3/MWCNT, which showed an ORR activation potential of 0.87 V vs. RHE, comparable to that of the commercial Pt/C catalyst (0.99 V vs. RHE), while the overpotential for OER was lower than that of the Pt/C catalyst (1.68 V vs. RHE for La(Ni0.9Pd0.1)O3/MWCNT and 1.79 V vs. RHE for the commercial Pt/C).
Open AccessEffect of the Dopant and Carbonaceous Support of the Perovskite Type LaNi0.9X0.1O3 (X = Fe, Mn or Pd) on the Performance of Zn–Air Battery
The oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are two processes that occur during the operation of the cathodic electrode in Zn–Air batteries, which enable the integration of alternative energy sources into electrical energy distribution systems. Transition metal oxides, such as perovskites based on LaNiO3, are promising electrocatalysts for the ORR and OER in alkaline medium due to their versatile structure, allowing for the substitution of certain atoms with dopants, which enhances the catalytic activity for both reactions. This work reports an electrochemical study of the catalytic activity toward ORR and OER of perovskite catalysts (LaNiO3 doped with transition metals (Fe, Mn, or Pd)) in the presence of carbon-based materials as supports (multiwalled carbon nanotubes (MWCNT), graphene oxide nanosheets (GO), and graphitic carbon (C)). The results revealed interesting catalytic properties in both reactions, particularly La(Ni0.9Pd0.1)O3/MWCNT, which showed an ORR activation potential of 0.87 V vs. RHE, comparable to that of the commercial Pt/C catalyst (0.99 V vs. RHE), while the overpotential for OER was lower than that of the Pt/C catalyst (1.68 V vs. RHE for La(Ni0.9Pd0.1)O3/MWCNT and 1.79 V vs. RHE for the commercial Pt/C).
- Open Access
- 1 October 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (10) , 104509
Electro-Oxidative Dehydrogenation of Ethane to Ethylene Using Lanthanum-Strontium-Iron Oxide Perovskite Electrocatalysts
Developing alternative, industrially viable ethylene production routes has received important research attention. One chemical pathway of interest is the oxidative dehydrogenation (ODH) of ethane, although issues such as product selectivity, combustion hazards, and oxidizer supply have hindered the practical scale-up of this technology. The presented work describes the use of a solid oxide fuel cell (SOFC) platform employing lanthanum-strontium-iron oxide perovskite (La1-xSrxFeO3-δ , or LSFx) electrocatalysts to perform electrochemical-ODH (e-ODH), a process design that has the potential to address the challenges of ODH implementation. The effects of La and Sr stoichiometry, operating temperature, and current density are reported. The highest performance was observed using a La:Sr ratio of 0.50 (LSF0.50) at 750 °C and a current density of 0.50 A·cm−2, achieving an ethane conversion of 18.7 ± 0.3%, ethylene selectivity of 91.4 ± 1.9%, and ethylene yield of 17.1 ± 0.1%. These results demonstrate several potential advantages for utilizing a SOFC platform to perform e-ODH of ethane to ethylene.
- 1 October 2023
- Published by The Electrochemical Society in Journal of the Electrochemical Society
- Vol. 170 (10) , 104509
Open AccessElectro-Oxidative Dehydrogenation of Ethane to Ethylene Using Lanthanum-Strontium-Iron Oxide Perovskite Electrocatalysts
Developing alternative, industrially viable ethylene production routes has received important research attention. One chemical pathway of interest is the oxidative dehydrogenation (ODH) of ethane, although issues such as product selectivity, combustion hazards, and oxidizer supply have hindered the practical scale-up of this technology. The presented work describes the use of a solid oxide fuel cell (SOFC) platform employing lanthanum-strontium-iron oxide perovskite (La1-xSrxFeO3-δ , or LSFx) electrocatalysts to perform electrochemical-ODH (e-ODH), a process design that has the potential to address the challenges of ODH implementation. The effects of La and Sr stoichiometry, operating temperature, and current density are reported. The highest performance was observed using a La:Sr ratio of 0.50 (LSF0.50) at 750 °C and a current density of 0.50 A·cm−2, achieving an ethane conversion of 18.7 ± 0.3%, ethylene selectivity of 91.4 ± 1.9%, and ethylene yield of 17.1 ± 0.1%. These results demonstrate several potential advantages for utilizing a SOFC platform to perform e-ODH of ethane to ethylene.
- 1 June 2021
- Published by Elsevier in Journal of CO2 Utilization
- Vol. 48, 101527
A novel solid oxide electrolytic cell with reduced endothermic load for CO2 electrolysis using (La0.80Sr0.20)0.95MnO3-δ cathode
- 1 June 2021
- Published by Elsevier in Journal of CO2 Utilization
- Vol. 48, 101527
A novel solid oxide electrolytic cell with reduced endothermic load for CO2 electrolysis using (La0.80Sr0.20)0.95MnO3-δ cathode
- 1 December 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 292, 446-457
Effects of testing conditions on the performance of carbon-supported bifunctional electrodes
- 1 December 2018
- Published by Elsevier in Electrochimica Acta
- Vol. 292, 446-457
Effects of testing conditions on the performance of carbon-supported bifunctional electrodes