Ponmalar Selvam
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Ponmalar Selvam has a total of 2 co-authors. Here are the top co-authors by number of shared publications:
- Revathi Purushothaman
Department of Civil Engineering, Puducherry Technological University, Puducherry, India
2 shared publications - Sankar Boomibalan
Department of Civil Engineering, Mangalam College of Engineering, Kottayam, India
2 shared publications
Latest Publications
- 25 June 2025
- Published by Springer Nature in Circular Economy and Sustainability
- Vol. 5 (7) , 6643-6670
Engineering Performance of Recycled Aggregate Concrete Containing Plastic Waste Aggregate and Glass Cullet
- 25 June 2025
- Published by Springer Nature in Circular Economy and Sustainability
- Vol. 5 (7) , 6643-6670
Engineering Performance of Recycled Aggregate Concrete Containing Plastic Waste Aggregate and Glass Cullet
- 20 May 2025
- Published by Wiley in Structural Concrete
- Vol. 27 (1) , 891-912
Influence of ultrafine slag and sulfate activation on the strength, durability and microstructural performance of high‐volume fly ash concrete containing recycled plastic waste aggregate
The present research aims to explore a more reliable way of utilizing a high volume of fly ash in concrete to meet global needs without causing any adverse effect on the environment. In the initial stage of the study, the engineering performance of concrete containing binary systems of high‐volume fly ash (HVFA) and ternary systems of HVFA and alccofine (AL) was examined. In the later stage, the effect of plastic waste aggregate addition and sulfate activation on the strength, durability, and morphology of concrete was determined for both binary and ternary systems of HVFA and AL. The laboratory experimental program involved heat of hydration, compressive strength, flexural strength, water absorption, rapid chloride penetration, TGA, XRD, and SEM analysis. Experimental investigations revealed that the mechanical properties of the HVFA concrete decreased with an increase in fly ash content. The 28‐day compressive strength reduced up to 41.6% for the mix containing 50% FA when compared with normal concrete. However, the addition of reactive AL increased the pozzolanic reaction and formed denser hydration products that densified the matrix, resulting in improved mechanical properties. The addition of 10% AL reduced the chloride permeation to about 26% for the mix containing 50% FA. The denser particle packing reduced the capillary pores near the surface, lowering the water and chloride permeation. The inclusion of plastic aggregate reduced the early age strength properties; however, in the later ages, denser hydration products formed around the boundary of aggregates, which was evident from the morphology analysis. At 28 days, both the control mix and the mix containing 40%FA:10% AL:20% plastic aggregate exhibited the highest compressive strength, ~47 and 42 MPa compared with the other mixtures. In the HVFA mixes, the FA particles were merely acting as pore fillers and remained dormant in the early ages. The addition of AL along with sulfate activation produced more nucleation sites, which then formed C‐S‐H and C‐A‐S‐H. Consequently, the improvement in the microstructure resulted in better mechanical and durability properties.
- 20 May 2025
- Published by Wiley in Structural Concrete
- Vol. 27 (1) , 891-912
Influence of ultrafine slag and sulfate activation on the strength, durability and microstructural performance of high‐volume fly ash concrete containing recycled plastic waste aggregate
The present research aims to explore a more reliable way of utilizing a high volume of fly ash in concrete to meet global needs without causing any adverse effect on the environment. In the initial stage of the study, the engineering performance of concrete containing binary systems of high‐volume fly ash (HVFA) and ternary systems of HVFA and alccofine (AL) was examined. In the later stage, the effect of plastic waste aggregate addition and sulfate activation on the strength, durability, and morphology of concrete was determined for both binary and ternary systems of HVFA and AL. The laboratory experimental program involved heat of hydration, compressive strength, flexural strength, water absorption, rapid chloride penetration, TGA, XRD, and SEM analysis. Experimental investigations revealed that the mechanical properties of the HVFA concrete decreased with an increase in fly ash content. The 28‐day compressive strength reduced up to 41.6% for the mix containing 50% FA when compared with normal concrete. However, the addition of reactive AL increased the pozzolanic reaction and formed denser hydration products that densified the matrix, resulting in improved mechanical properties. The addition of 10% AL reduced the chloride permeation to about 26% for the mix containing 50% FA. The denser particle packing reduced the capillary pores near the surface, lowering the water and chloride permeation. The inclusion of plastic aggregate reduced the early age strength properties; however, in the later ages, denser hydration products formed around the boundary of aggregates, which was evident from the morphology analysis. At 28 days, both the control mix and the mix containing 40%FA:10% AL:20% plastic aggregate exhibited the highest compressive strength, ~47 and 42 MPa compared with the other mixtures. In the HVFA mixes, the FA particles were merely acting as pore fillers and remained dormant in the early ages. The addition of AL along with sulfate activation produced more nucleation sites, which then formed C‐S‐H and C‐A‐S‐H. Consequently, the improvement in the microstructure resulted in better mechanical and durability properties.
- Open Access
- 5 September 2023
- Published by Universal Wiser Publisher Pte. Ltd in Materials Plus
- p. 7-23
Repurposing Single-Use Plastic Waste as Artificial Aggregates Partially Replacing the Natural Fine Aggregate in Concrete — A Review
There is a growing increase in the global consumption of plastic in recent times. Reutilization of plastic by recycling is a highly effective solution to manage the increasing plastic waste (PW). Besides, reuse of plastic also helps in improving environmental sustainability. In this context, there is a great demand for the recycled plastics in various applications. This review paper presents an empirical evaluation on the application of single use plastic waste as an artificial aggregate as a replacement to the natural fine aggregate (FA) in concrete mixtures. This review also discusses the influence of mechanical properties on the cementitious composites consisting of plastic waste aggregate (PWA). This paper reviews an overall 135 research papers and illustrates different types of plastics and their application in improving the concrete properties. The review also provides an overview of the works proposed by different researchers and highlights their contribution. In addition, this paper also identifies the research gaps and highlights some of the prominent observations.
- 5 September 2023
- Published by Universal Wiser Publisher Pte. Ltd in Materials Plus
- p. 7-23
Open AccessRepurposing Single-Use Plastic Waste as Artificial Aggregates Partially Replacing the Natural Fine Aggregate in Concrete — A Review
There is a growing increase in the global consumption of plastic in recent times. Reutilization of plastic by recycling is a highly effective solution to manage the increasing plastic waste (PW). Besides, reuse of plastic also helps in improving environmental sustainability. In this context, there is a great demand for the recycled plastics in various applications. This review paper presents an empirical evaluation on the application of single use plastic waste as an artificial aggregate as a replacement to the natural fine aggregate (FA) in concrete mixtures. This review also discusses the influence of mechanical properties on the cementitious composites consisting of plastic waste aggregate (PWA). This paper reviews an overall 135 research papers and illustrates different types of plastics and their application in improving the concrete properties. The review also provides an overview of the works proposed by different researchers and highlights their contribution. In addition, this paper also identifies the research gaps and highlights some of the prominent observations.
- Open Access
- 1 March 2018
- Published by Walter de Gruyter GmbH in Selected Scientific Papers - Journal of Civil Engineering
- Vol. 13 (s1) , 95-105
Bond behavior of self compacting concrete
The success of an optimum design lies in the effective load transfer done by the bond forces at the steel-concrete interface. Self Compacting Concrete, is a new innovative concrete capable of filling intrinsic reinforcement and gets compacted by itself, without the need of external mechanical vibration. For this reason, it is replacing the conventional vibrated concrete in the construction industry. The present paper outlays the materials and methods adopted for attaining the self compacting concrete and describes about the bond behavior of this concrete. The bond stress-slip curve is similar in the bottom bars for both SCC and normal concrete whereas a higher bond stress and stiffness is experienced in the top and middle bars, for SCC compared to normal concrete. Also the interfacial properties revealed that the elastic modulus and micro-strength of interfacial transition zone [ITZ] were better on the both top and bottom side of horizontal steel bar in the SCC mixes than in normal vibrated concrete. The local bond strength of top bars for SCC is about 20% less than that for NC. For the bottom bars, however, the results were almost the same.
- 1 March 2018
- Published by Walter de Gruyter GmbH in Selected Scientific Papers - Journal of Civil Engineering
- Vol. 13 (s1) , 95-105
Open AccessBond behavior of self compacting concrete
The success of an optimum design lies in the effective load transfer done by the bond forces at the steel-concrete interface. Self Compacting Concrete, is a new innovative concrete capable of filling intrinsic reinforcement and gets compacted by itself, without the need of external mechanical vibration. For this reason, it is replacing the conventional vibrated concrete in the construction industry. The present paper outlays the materials and methods adopted for attaining the self compacting concrete and describes about the bond behavior of this concrete. The bond stress-slip curve is similar in the bottom bars for both SCC and normal concrete whereas a higher bond stress and stiffness is experienced in the top and middle bars, for SCC compared to normal concrete. Also the interfacial properties revealed that the elastic modulus and micro-strength of interfacial transition zone [ITZ] were better on the both top and bottom side of horizontal steel bar in the SCC mixes than in normal vibrated concrete. The local bond strength of top bars for SCC is about 20% less than that for NC. For the bottom bars, however, the results were almost the same.