Sankar Boomibalan
Research Subjects
Sankar Boomibalan has a total of 18 co-authors. Here are the top co-authors by number of shared publications:
P. Ramadoss
Department of Civil Engineering, Puducherry Technological University, Puducherry, India
2 shared publications- Ponmalar Selvam
Department of Civil Engineering, Puducherry Technological University, Puducherry, India
2 shared publications - Ramadoss Perumal
Department of Civil Engineering, PTU, Puducherry, 605014, India
2 shared publications - Revathi Purushothaman
Department of Civil Engineering, Puducherry Technological University, Puducherry, India
2 shared publications Anamika S M
1 shared publicationArunkumar K
1 shared publication
Latest Publications
- 25 June 2025
- Published by Springer Nature in Circular Economy and Sustainability
- Vol. 5 (7) , 6643-6670
Engineering Performance of Recycled Aggregate Concrete Containing Plastic Waste Aggregate and Glass Cullet
- 25 June 2025
- Published by Springer Nature in Circular Economy and Sustainability
- Vol. 5 (7) , 6643-6670
Engineering Performance of Recycled Aggregate Concrete Containing Plastic Waste Aggregate and Glass Cullet
- 20 May 2025
- Published by Wiley in Structural Concrete
- Vol. 27 (1) , 891-912
Influence of ultrafine slag and sulfate activation on the strength, durability and microstructural performance of high‐volume fly ash concrete containing recycled plastic waste aggregate
The present research aims to explore a more reliable way of utilizing a high volume of fly ash in concrete to meet global needs without causing any adverse effect on the environment. In the initial stage of the study, the engineering performance of concrete containing binary systems of high‐volume fly ash (HVFA) and ternary systems of HVFA and alccofine (AL) was examined. In the later stage, the effect of plastic waste aggregate addition and sulfate activation on the strength, durability, and morphology of concrete was determined for both binary and ternary systems of HVFA and AL. The laboratory experimental program involved heat of hydration, compressive strength, flexural strength, water absorption, rapid chloride penetration, TGA, XRD, and SEM analysis. Experimental investigations revealed that the mechanical properties of the HVFA concrete decreased with an increase in fly ash content. The 28‐day compressive strength reduced up to 41.6% for the mix containing 50% FA when compared with normal concrete. However, the addition of reactive AL increased the pozzolanic reaction and formed denser hydration products that densified the matrix, resulting in improved mechanical properties. The addition of 10% AL reduced the chloride permeation to about 26% for the mix containing 50% FA. The denser particle packing reduced the capillary pores near the surface, lowering the water and chloride permeation. The inclusion of plastic aggregate reduced the early age strength properties; however, in the later ages, denser hydration products formed around the boundary of aggregates, which was evident from the morphology analysis. At 28 days, both the control mix and the mix containing 40%FA:10% AL:20% plastic aggregate exhibited the highest compressive strength, ~47 and 42 MPa compared with the other mixtures. In the HVFA mixes, the FA particles were merely acting as pore fillers and remained dormant in the early ages. The addition of AL along with sulfate activation produced more nucleation sites, which then formed C‐S‐H and C‐A‐S‐H. Consequently, the improvement in the microstructure resulted in better mechanical and durability properties.
- 20 May 2025
- Published by Wiley in Structural Concrete
- Vol. 27 (1) , 891-912
Influence of ultrafine slag and sulfate activation on the strength, durability and microstructural performance of high‐volume fly ash concrete containing recycled plastic waste aggregate
The present research aims to explore a more reliable way of utilizing a high volume of fly ash in concrete to meet global needs without causing any adverse effect on the environment. In the initial stage of the study, the engineering performance of concrete containing binary systems of high‐volume fly ash (HVFA) and ternary systems of HVFA and alccofine (AL) was examined. In the later stage, the effect of plastic waste aggregate addition and sulfate activation on the strength, durability, and morphology of concrete was determined for both binary and ternary systems of HVFA and AL. The laboratory experimental program involved heat of hydration, compressive strength, flexural strength, water absorption, rapid chloride penetration, TGA, XRD, and SEM analysis. Experimental investigations revealed that the mechanical properties of the HVFA concrete decreased with an increase in fly ash content. The 28‐day compressive strength reduced up to 41.6% for the mix containing 50% FA when compared with normal concrete. However, the addition of reactive AL increased the pozzolanic reaction and formed denser hydration products that densified the matrix, resulting in improved mechanical properties. The addition of 10% AL reduced the chloride permeation to about 26% for the mix containing 50% FA. The denser particle packing reduced the capillary pores near the surface, lowering the water and chloride permeation. The inclusion of plastic aggregate reduced the early age strength properties; however, in the later ages, denser hydration products formed around the boundary of aggregates, which was evident from the morphology analysis. At 28 days, both the control mix and the mix containing 40%FA:10% AL:20% plastic aggregate exhibited the highest compressive strength, ~47 and 42 MPa compared with the other mixtures. In the HVFA mixes, the FA particles were merely acting as pore fillers and remained dormant in the early ages. The addition of AL along with sulfate activation produced more nucleation sites, which then formed C‐S‐H and C‐A‐S‐H. Consequently, the improvement in the microstructure resulted in better mechanical and durability properties.
- 21 July 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (2) , 1498-1519
Experimental investigations on mechanical performance, synergy assessment, and microstructure of pozzolanic and non‐pozzolanic hybrid steel fiber reinforced concrete
This paper investigates the effects of pozzolanic substitutions for ordinary Portland cement (OPC) with silica fume (SF) and metakaolin (MK) on the mechanical and toughness performances of steel fiber reinforced concrete (SFRC). Initially, a reference concrete mix with a water‐to‐binder ratio of 0.4 is blended with different volume fractions of steel fibers with varying geometry: crimped steel (CS) and straight steel (SS), both individually and in combination, to examine their mechanical properties. In the subsequent phase, the study investigates the impact of combining macro‐ and microsteel fibers on flexural toughness, to determine potential synergy for suitable combinations. Also, the possible influence of pozzolans in the variation of flexural toughness of hybrid steel fiber reinforced concrete (Hy‐SFRC) was evaluated. Hybridization of steel fibers was found effective in improving the workability of the concrete mix up to 11%. SFRC mixes containing pozzolans exhibited a significant enhancement in compressive strength, modulus of rupture, and modulus of elasticity compared to non‐pozzolanic SFRC. The hybrid combination of CS 1.5% and SS 0.5% was considered the best in terms of mechanical properties. Additionally, the results of synergy assessment showed that hybridization of steel fibers in the pozzolanic concrete mix was particularly effective in the post‐cracking stages with a positive 14% compared to a negative 8% in the pre‐cracking stage. The pozzolanic addition improved the flexural toughness of Hy‐SFRC to about 10%–20%. Blending of SF and MK in Hy‐SFRC was found effective in enhancing the toughness mechanism of concrete compared to Hy‐SFRC mixes containing binary SF and MK, indicating a stronger bond between the fibers and the matrix resulting from the pore refinement and hydration products developed at the interface. Hy‐SFRC containing a ternary pozzolanic mix of SF 10% and MK 10% gave the best results in flexural toughness, and the corresponding synergy values were found to be the maximum. The results were consistent with the morphology analysis, which revealed an increase in hydration products at the interface between the aggregate and concrete matrix, as well as between the steel fiber and concrete matrix, due to the ternary blending of SF and MK.
- 21 July 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (2) , 1498-1519
Experimental investigations on mechanical performance, synergy assessment, and microstructure of pozzolanic and non‐pozzolanic hybrid steel fiber reinforced concrete
This paper investigates the effects of pozzolanic substitutions for ordinary Portland cement (OPC) with silica fume (SF) and metakaolin (MK) on the mechanical and toughness performances of steel fiber reinforced concrete (SFRC). Initially, a reference concrete mix with a water‐to‐binder ratio of 0.4 is blended with different volume fractions of steel fibers with varying geometry: crimped steel (CS) and straight steel (SS), both individually and in combination, to examine their mechanical properties. In the subsequent phase, the study investigates the impact of combining macro‐ and microsteel fibers on flexural toughness, to determine potential synergy for suitable combinations. Also, the possible influence of pozzolans in the variation of flexural toughness of hybrid steel fiber reinforced concrete (Hy‐SFRC) was evaluated. Hybridization of steel fibers was found effective in improving the workability of the concrete mix up to 11%. SFRC mixes containing pozzolans exhibited a significant enhancement in compressive strength, modulus of rupture, and modulus of elasticity compared to non‐pozzolanic SFRC. The hybrid combination of CS 1.5% and SS 0.5% was considered the best in terms of mechanical properties. Additionally, the results of synergy assessment showed that hybridization of steel fibers in the pozzolanic concrete mix was particularly effective in the post‐cracking stages with a positive 14% compared to a negative 8% in the pre‐cracking stage. The pozzolanic addition improved the flexural toughness of Hy‐SFRC to about 10%–20%. Blending of SF and MK in Hy‐SFRC was found effective in enhancing the toughness mechanism of concrete compared to Hy‐SFRC mixes containing binary SF and MK, indicating a stronger bond between the fibers and the matrix resulting from the pore refinement and hydration products developed at the interface. Hy‐SFRC containing a ternary pozzolanic mix of SF 10% and MK 10% gave the best results in flexural toughness, and the corresponding synergy values were found to be the maximum. The results were consistent with the morphology analysis, which revealed an increase in hydration products at the interface between the aggregate and concrete matrix, as well as between the steel fiber and concrete matrix, due to the ternary blending of SF and MK.
- Open Access
- 22 January 2024
- Published by Akademiai Kiado Zrt. in International Review of Applied Sciences and Engineering
- Vol. 15 (1) , 44-54
Assessment of mechanical and durability performance of silica fume and metakaolin as cementitious materials in high-performance concrete
The present study aims to determine the effects of blending cementitious materials on the mechanical and durability properties of high-performance concrete (HPC). Densified silica fume and fine-grounded metakaolin are used as supplementary cementitious materials (SCMs). A total of 16 mixes containing both binary and ternary blending of SCMs were chosen for w/b ratios of 0.4 and 0.3 respectively. The hardened properties tested for the HPC mixes were compressive strength at 7, 28, and 90 days, flexural strength at 28 days, and modulus of elasticity at 28 days. Maximum strength gains up to 15%, 38%, and 23% for compression, flexure, and elastic modulus were observed in ternary mixes compared to binary mixes. Stress-strain behaviour of ternary mixes indicates increased tolerance of stress for the least amount of strain in the specimens. Based on the experimental results, empirical relations were developed and checked with the existing codes and by earlier researchers. The durability properties tested for HPC were water absorption at 28 days, acid attack, and sulphate attack at 28, 56, and 90 days. Ternary mixes improved the pore structure of HPC, resulting in a 56% reduction in water absorption and a 34% reduction in compressive strength loss due to immersion in 5% H2SO4 at 90 days. The findings of the study endorse that ternary blending of SF and MK can improve the engineering properties of HPC, and a mix containing SF 10% and MK 10% is recommended for the best results.
- 22 January 2024
- Published by Akademiai Kiado Zrt. in International Review of Applied Sciences and Engineering
- Vol. 15 (1) , 44-54
Open AccessAssessment of mechanical and durability performance of silica fume and metakaolin as cementitious materials in high-performance concrete
The present study aims to determine the effects of blending cementitious materials on the mechanical and durability properties of high-performance concrete (HPC). Densified silica fume and fine-grounded metakaolin are used as supplementary cementitious materials (SCMs). A total of 16 mixes containing both binary and ternary blending of SCMs were chosen for w/b ratios of 0.4 and 0.3 respectively. The hardened properties tested for the HPC mixes were compressive strength at 7, 28, and 90 days, flexural strength at 28 days, and modulus of elasticity at 28 days. Maximum strength gains up to 15%, 38%, and 23% for compression, flexure, and elastic modulus were observed in ternary mixes compared to binary mixes. Stress-strain behaviour of ternary mixes indicates increased tolerance of stress for the least amount of strain in the specimens. Based on the experimental results, empirical relations were developed and checked with the existing codes and by earlier researchers. The durability properties tested for HPC were water absorption at 28 days, acid attack, and sulphate attack at 28, 56, and 90 days. Ternary mixes improved the pore structure of HPC, resulting in a 56% reduction in water absorption and a 34% reduction in compressive strength loss due to immersion in 5% H2SO4 at 90 days. The findings of the study endorse that ternary blending of SF and MK can improve the engineering properties of HPC, and a mix containing SF 10% and MK 10% is recommended for the best results.
- Open Access
- 1 June 2023
- Published by Elsevier in Results in Control and Optimization
- Vol. 12
Modelling the compressive strength of high-performance concrete containing metakaolin using distinctive statistical techniques
- 1 June 2023
- Published by Elsevier in Results in Control and Optimization
- Vol. 12
Open AccessModelling the compressive strength of high-performance concrete containing metakaolin using distinctive statistical techniques
- 1 January 2022
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 35 (8) , 1629-1640
Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete
This paper investigates the potential benefits of Ternary blended High-performance concrete containing Silica fume (SF) and Alccofine (AL) as partial cement replacements. The experimental program contains a total of 14 mixes with a water to binder ratio of 0.4 and varying percentages (0-20%) of Silica fume and Alccofine both as binary and ternary blended. Fresh and hardened properties of concrete were evaluated based on slump, compressive strength, flexural strength, split tensile strength and water absorption tests. Ternary mixes containing SF and AL increased concrete compressive strength by 14-27% and tensile strength by 26-43% compared to the reference mix. Rise in early strength development for all the ternary blended mixes is attributed to the presence of highly reactive alccofine. Higher replacement of Alccofine more than 10% led to a steady decrease in strength due to dilution effect, whereas for silica fume, the strength dilution was gradual beyond 15% replacement. Denser particle packing reduced water absorption in ternary mixes. A mix containing 15% SF and 5% AL showed 65.7% reduction in water absorption compared to reference mix. Synergy assessment were done for all the ternary mixes, peak result was obtained for a mixture containing 10% SF and 10% AL. Based on the experimental data, empirical models were developed and compared with the existing codes and earlier researches. Empirical models proposed in this study have the least Integral Absolute Error (IAE) of 0.47% and 1.55% in predicting flexural strength and split tensile strength based on compressive strength of concrete.
- 1 January 2022
- Published by International Digital Organization for Scientific Information (IDOSI) in International Journal of Engineering
- Vol. 35 (8) , 1629-1640
Experimental and Statistical Investigations on Alccofine Based Ternary Blended High-performance Concrete
This paper investigates the potential benefits of Ternary blended High-performance concrete containing Silica fume (SF) and Alccofine (AL) as partial cement replacements. The experimental program contains a total of 14 mixes with a water to binder ratio of 0.4 and varying percentages (0-20%) of Silica fume and Alccofine both as binary and ternary blended. Fresh and hardened properties of concrete were evaluated based on slump, compressive strength, flexural strength, split tensile strength and water absorption tests. Ternary mixes containing SF and AL increased concrete compressive strength by 14-27% and tensile strength by 26-43% compared to the reference mix. Rise in early strength development for all the ternary blended mixes is attributed to the presence of highly reactive alccofine. Higher replacement of Alccofine more than 10% led to a steady decrease in strength due to dilution effect, whereas for silica fume, the strength dilution was gradual beyond 15% replacement. Denser particle packing reduced water absorption in ternary mixes. A mix containing 15% SF and 5% AL showed 65.7% reduction in water absorption compared to reference mix. Synergy assessment were done for all the ternary mixes, peak result was obtained for a mixture containing 10% SF and 10% AL. Based on the experimental data, empirical models were developed and compared with the existing codes and earlier researches. Empirical models proposed in this study have the least Integral Absolute Error (IAE) of 0.47% and 1.55% in predicting flexural strength and split tensile strength based on compressive strength of concrete.