Lushuai Xu
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Lushuai Xu has a total of 8 co-authors. Here are the top co-authors by number of shared publications:
Jiu Hui Wu
School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an, China
4 shared publications- Yunlei Wang
School of Mechanical Engineering, Xi’an Jiaotong University, Xi’an, China
3 shared publications - Faisal Rafique
Department of Mechanics and Aerospace Engineering, Southern University of Science and Technology, Shenzhen, China
1 shared publication Hongjun Liu
Dongying Chemical Technology School, Dongying, China
1 shared publicationJimin Xu
Institute of Tribology, Hefei University of Technology, China
1 shared publication- Xiaoyang Yuan
Xi’an Jiaotong University
1 shared publication
Latest Publications
- 7 December 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 236 (8) , 1623-1633
Static and dynamic characteristics of a Rayleigh-steps mechanical seal with reverse steps
This paper presents a Rayleigh-steps mechanical seal with reverse steps (RS-MS), and the governing equation was solved by the finite difference method (FDM). The effects of angular misalignment, working condition parameters, and film thickness on sealing performance were discussed, including the opening force, cavitation ratio, leakage rate, frictional torque, stiffness and damping coefficients. The results indicate that the cavitation phenomenon in the reverse step groove can restrain the leakage, while it also affects the stability of the seal. The angular misalignment makes the seal have greater stiffness and damping coefficients. The stiffness and damping coefficients decrease rapidly with the increase of the film thickness, and the dynamic stability of the mechanical seal decreases with the increase of the film thickness, which is not conducive to the stable operation of the seal. The research results can guide the optimization design of mechanical seals.
- 7 December 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 236 (8) , 1623-1633
Static and dynamic characteristics of a Rayleigh-steps mechanical seal with reverse steps
This paper presents a Rayleigh-steps mechanical seal with reverse steps (RS-MS), and the governing equation was solved by the finite difference method (FDM). The effects of angular misalignment, working condition parameters, and film thickness on sealing performance were discussed, including the opening force, cavitation ratio, leakage rate, frictional torque, stiffness and damping coefficients. The results indicate that the cavitation phenomenon in the reverse step groove can restrain the leakage, while it also affects the stability of the seal. The angular misalignment makes the seal have greater stiffness and damping coefficients. The stiffness and damping coefficients decrease rapidly with the increase of the film thickness, and the dynamic stability of the mechanical seal decreases with the increase of the film thickness, which is not conducive to the stable operation of the seal. The research results can guide the optimization design of mechanical seals.
- 4 October 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 236 (5) , 892-907
Lubrication and stability enhancement by attaching superconducting magnetic force on non-contacting mechanical seals for reusable rocket turbopump
The purpose of this paper is to investigate the lubrication performance and stability improvement of rocket turbopump mechanical seals by attaching superconducting magnetic force. A comprehensive multiphysics numerical model is presented including microscale clearance flow, magnetic field, as well as three degrees of freedom dynamic motion. The Maxwell equation and modified Reynolds equation considering mass-conserving boundary conditions and turbulence flow were solved simultaneously at each time step to obtain the transient response of sealing parameters. Results indicate that the mechanical seal attaching superconducting magnetic force could dramatically improve carrying capacity and lubrication characteristics under heavy loading conditions, and it also has an appreciable effect on dynamic stability. It is worth exploring the application of superconducting magnetic force in reusable rockets and cryogenic equipment combined with its unique advantages.
- 4 October 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 236 (5) , 892-907
Lubrication and stability enhancement by attaching superconducting magnetic force on non-contacting mechanical seals for reusable rocket turbopump
The purpose of this paper is to investigate the lubrication performance and stability improvement of rocket turbopump mechanical seals by attaching superconducting magnetic force. A comprehensive multiphysics numerical model is presented including microscale clearance flow, magnetic field, as well as three degrees of freedom dynamic motion. The Maxwell equation and modified Reynolds equation considering mass-conserving boundary conditions and turbulence flow were solved simultaneously at each time step to obtain the transient response of sealing parameters. Results indicate that the mechanical seal attaching superconducting magnetic force could dramatically improve carrying capacity and lubrication characteristics under heavy loading conditions, and it also has an appreciable effect on dynamic stability. It is worth exploring the application of superconducting magnetic force in reusable rockets and cryogenic equipment combined with its unique advantages.
- 18 May 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 235 (23) , 7273-7279
Quantitative analysis method for laminar-turbulence transition process of mechanical seal by a catastrophic model
Fluid flow regime has an important influence on the lubrication performance of mechanical seal. A novel method is proposed to analyze the flow regime transition quantitatively based on a cusp catastrophic model with dimensionless analysis. Furthermore, from this method, a turbulence transition factor is derived strictly to describe the turbulent transition process of mechanical seal, which is verified by the published results. Then this factor is applied to hydrodynamic lubrication mechanical seal to analyze the influence of flow regime on sealing performance. The results indicate that the performance parameters of mechanical seal are greatly influenced by the transition of fluid flow regime, and the stability of mechanical seal decreases in the transition to turbulent flow. The novel method of flow regime transition analysis provides a new insight into the turbulence model.
- 18 May 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
- Vol. 235 (23) , 7273-7279
Quantitative analysis method for laminar-turbulence transition process of mechanical seal by a catastrophic model
Fluid flow regime has an important influence on the lubrication performance of mechanical seal. A novel method is proposed to analyze the flow regime transition quantitatively based on a cusp catastrophic model with dimensionless analysis. Furthermore, from this method, a turbulence transition factor is derived strictly to describe the turbulent transition process of mechanical seal, which is verified by the published results. Then this factor is applied to hydrodynamic lubrication mechanical seal to analyze the influence of flow regime on sealing performance. The results indicate that the performance parameters of mechanical seal are greatly influenced by the transition of fluid flow regime, and the stability of mechanical seal decreases in the transition to turbulent flow. The novel method of flow regime transition analysis provides a new insight into the turbulence model.
- 12 April 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 236 (1) , 70-79
Influence of turbulent cavitating flow on performance characteristics of spiral groove liquid film seal
Spiral groove liquid film seal is expected to be the prime candidate for application to high-speed liquid-oxygen turbopumps, and the lubricant flow between the sealing faces is turbulent due to the liquid-oxygen properties and the working conditions. Based on the Ng–Pan model and mass-conserving algorithm, the modified dynamic Reynolds equation considering flow regime and cavitation is obtained, which is solved by the finite-difference method. The effects of flow regime and cavitation on the performance of spiral groove liquid film seal are analyzed. The results indicate that the balanced film thickness and opening force increase due to the turbulent flow. The cavitation ratio increases in the laminar–turbulent transition region, which reduces the opening force and liquid film stiffness.
- 12 April 2021
- Published by SAGE Publications in Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology
- Vol. 236 (1) , 70-79
Influence of turbulent cavitating flow on performance characteristics of spiral groove liquid film seal
Spiral groove liquid film seal is expected to be the prime candidate for application to high-speed liquid-oxygen turbopumps, and the lubricant flow between the sealing faces is turbulent due to the liquid-oxygen properties and the working conditions. Based on the Ng–Pan model and mass-conserving algorithm, the modified dynamic Reynolds equation considering flow regime and cavitation is obtained, which is solved by the finite-difference method. The effects of flow regime and cavitation on the performance of spiral groove liquid film seal are analyzed. The results indicate that the balanced film thickness and opening force increase due to the turbulent flow. The cavitation ratio increases in the laminar–turbulent transition region, which reduces the opening force and liquid film stiffness.