Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Mustafa Seyrek has a total of 10 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Route as a Tool for Holistic Understanding of Industrial Heritage Areas: Kelham Island and the Furnace Trail

    by Şeyma Seyrek, Mustafa Seyrek

    Kelham Island is a historic industrial area in Sheffield, England, representing the innovative initiatives of its time that transformed the city into a globally significant hub for iron and steel production. While industry shaped the city's identity, from its architecture to daily life, Kelham Island hosted technological discoveries that played a key role in industrial history, such as the mass production of steel and the invention of stainless steel. However, from the mid-20th century, as the steel industry entered a period of decline, the area was gradually abandoned. Conservation efforts initiated by the Sheffield Council in the 1980s designated Kelham Island as an "industrial conservation area." More recently, preservation work has revitalised the area, turning it into a key attraction. This study will explore industrial heritage routes that highlight the values of such areas and foster their holistic understanding, focusing on Kelham Island and the defined Furnace Trail within it.

  • Open Access

    Investigation of Tribological Properties of Brake Friction Materials Developed from Industrial Waste Products

    by Furkan Akbulut, Halil Kiliç, İbRahim Mutlu, Fatma Sena Öztürk, Eray Çaşin, Mustafa Seyrek, Abdullah Karaköse

    Various international initiatives on environmental issues and the need to protect the environment are promoting the use of industrial waste in a variety of applications, including automotive brake pads. These studies show that the reuse of industrial waste can help to reduce the environmental impact. The development of environmentally friendly and cost-effective composites for use in a variety of engineering applications is the need of the century. The use of industrial waste in composite production is a possible solution for both problems. In this study, the potential use of talc, quartz and ceramic waste FFC fracture as a friction modifier in brake friction materials and its performance properties in accordance with industry requirements were investigated. The tribological, physical and mechanical properties of the brake pads were measured, and the friction surface morphology was investigated by scanning electron microscopy. According to the results obtained, the highest specific wear rate was observed in the FM3 sample. The FM2 sample with the highest hardness and average friction coefficient showed the lowest wear. FM4, FM5 and FM6 samples with high talc and quartz content exhibited low coefficient of friction characteristics compared to other samples.


  • Open Access

    Treatment of Automotive Paint Wastewater: Photocatalytic degradation of methylene blue using semi-conductive ZrO2

    by Mustafa Seyrek, Filiz Boran, Merve Okutan

    Addressing water pollution, particularly in the automotive industry's painting processes, is vital due to its significant environmental impact, and the use of photocatalysis, an environmentally friendly and energy-efficient advanced oxidation method, holds promise for removing non-biodegradable organic dyes from wastewater. In this study, the use of semiconductor ZrO2 nanoparticles in the photocatalytic degradation of pollutants in wastewater under UV light was investigated. Zeta potential, Brunauer–Emmett–Teller (BET) surface area and UV-Vis absorption spectroscopy analyses were performed on the ZrO2 nanoparticle synthesized under optimized experimental conditions. ZrO2 nanoparticles synthesized under the optimized experimental conditions exhibited a high specific surface area (51.793 m2/g). ZrO2 nanoparticles had strong absorption in the visible light region, and the energy band gap was estimated to be approximately 3.062 eV. The photocatalytic activity was evaluated by the degradation of methylene blue under UV light (366 nm). The effects of parameters such as the amount of catalyst, concentration and pH of the dye solution, the wavelength of the UV light source used (366 and 254 nm) and the type of test environment on the removal efficiency of methylene blue were investigated. ZrO2 nanoparticles showed a high degradation efficiency of 91% in a strong alkaline environment, which may be the result of the facilitated formation of –OH radicals due to the increased concentration of hydroxyl ions.


  • Open Access

    Effect of CaO/Al2O3 Ratio on Physical Properties of Lime-Alumina-Based Mould Powders

    by Mustafa Seyrek, Richard Thackray

    High-aluminium steels contain a significant amount of aluminium. The reaction between Al in the liquid steel and SiO2 in lime-silica-based mould powders during the continuous casting process of high Al steel causes chemical compositional changes in the mould powders, subsequently affecting the surface quality of slabs. In order to solve the aforementioned problem, lime-alumina-based mould powders have been developed, which can lead to an increase in the surface quality of cast slabs by inhibiting steel/slag interaction. However, the mould slag tends to crystallise easily, which leads to a deterioration of the mould lubrication. In view of this aspect, it is important to develop and optimize lime-alumina-based mould powders to meet the requirements of continuous casting of high-aluminium steels. In this study, the changes in crystallinity, viscosity and melting temperature of lime-alumina-based mould powders with the effects of increasing the CaO/Al2O3 ratio have been observed through STA (Simultaneous Thermal Analysis), HSM (Hot Stage Microscopy), XRD (X-ray Diffraction), IPT (Inclined Plate Test) and rotational viscometer. The crystallisation behaviour of these mould powders was evaluated by generating CCT (continuous cooling transformation) diagrams. Additionally, the changes in steel chemistry have also been analysed using XRF (X-ray fluorescence) and ICP (Inductively Coupled Plasma Mass Spectrometer). The results of these analyses demonstrated that crystallinity of lime-alumina-based mould powder is increased while the initial crystallisation temperature and viscosity are decreased by CaO/Al2O3 additions. However, the degree of steel/slag interaction decreases with an increase in Al2O3 content.


  • Open Access

    Investigation on Viscosity of CaO-Al2O3 Based Mould Fluxes for the Continuous Casting of High-Al Steels

    by Mustafa Seyrek, Richard Thackray

    In this study, the viscosity of CaO-Al2O3 based mould fluxes with the addition of B2O3 and the effects of increasing the lime/alumina ratio have been observed through IPT (Inclined Plate Test). Additionally, FactSage software, Riboud and Urbain models were used to calculate the viscosity of the mould fluxes. The experimental results show that the viscosity of the mould fluxes decreases dramatically with a change in the lime/alumina ratio from 1 to 1.5. They also show that with an increase in the lime/alumina ratio ranging from 1.5 to 2.5, the viscosity slightly decreases, then when the lime/alumina ratio is over 2.5, the viscosity becomes stable. However, the addition of B2O3 decreases the viscosity of the mould fluxes at a lime/alumina ratio of 1.2, 3.3 and 5.5.