Jesse A. Sherburn
Research Subjects
Jesse A. Sherburn has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Matthew W. Priddy
Michael W. Hall School of Mechanical Engineering, Mississippi State University, Starkville, MS 39762, USA
2 shared publications - Brett A. Williams
US Army Corps of Engineers
1 shared publication D. J. Bammann
Center for Advanced Vehicular Systems, Mississippi State University, 200 Research Blvd., Starkville, MS 39759, USA
1 shared publication- Daniel H. Rios-Estremera
Geotechnical and Structures Laboratory (GSL), U.S. Army Engineer Research and Development Center (ERDC)
1 shared publication David Failla
Center for Advanced Vehicular Systems, Mississippi State University, Starkville, MS, USA
1 shared publication- Haoyan Wei
University of California Department of Structural Engineering San Diego, La Jolla, California 92093
1 shared publication
Latest Publications
- 16 March 2026
- Published by SAGE Publications in International Journal of Protective Structures
Monte Carlo simulation of steel spaced armor ballistic performance against fragment-simulating projectiles
Terminal ballistics models are typically calibrated with data from projectile impacts into single-material-single-layer (monolithic) targets. Such models fail to consider the complexities of layered and spaced armor configurations, which are commonplace in force-protection applications. Approaches leveraging existing monolithic terminal ballistic models have been developed to approximate such configurations, estimating overall response by superimposing the individual layer responses. A Monte Carlo (MC) superposition method is proposed for modeling the ( V 50 ) of A36 steel layered and spaced armor configurations against fragment-simulating projectiles (FSPs). Its performance was examined relative to four existing superposition methods from literature, using experimental V 50 data. Each superposition methodology was applied on two underlying terminal ballistics models for the layers, demonstrating their ability to leverage existing monolithic terminal ballistic models. The proposed MC superposition methodology consistently yielded the lowest error regardless of the underlying terminal ballistics model.
- 16 March 2026
- Published by SAGE Publications in International Journal of Protective Structures
Monte Carlo simulation of steel spaced armor ballistic performance against fragment-simulating projectiles
Terminal ballistics models are typically calibrated with data from projectile impacts into single-material-single-layer (monolithic) targets. Such models fail to consider the complexities of layered and spaced armor configurations, which are commonplace in force-protection applications. Approaches leveraging existing monolithic terminal ballistic models have been developed to approximate such configurations, estimating overall response by superimposing the individual layer responses. A Monte Carlo (MC) superposition method is proposed for modeling the ( V 50 ) of A36 steel layered and spaced armor configurations against fragment-simulating projectiles (FSPs). Its performance was examined relative to four existing superposition methods from literature, using experimental V 50 data. Each superposition methodology was applied on two underlying terminal ballistics models for the layers, demonstrating their ability to leverage existing monolithic terminal ballistic models. The proposed MC superposition methodology consistently yielded the lowest error regardless of the underlying terminal ballistics model.
- 23 August 2024
- Published by SAGE Publications in International Journal of Protective Structures
- Vol. 16 (3) , 707-733
Evaluation of two constitutive modeling approaches for finite element simulation of ballistic impact of varying thickness monolithic aluminum plates by steel spheres
A comparison of material models for numerical simulations of ballistic impact is performed to study a physics motivated model’s efficacy in overcoming the limitations of traditional empirical models in accurately capturing dynamic deformation and failure mechanisms. The ballistic impact of Aluminum 7085-T711 alloy plates struck by hardened steel projectiles has been modeled using Johnson-Cook (JC) and an Internal State Variable (ISV) constitutive model, DMG, embedded in Abaqus Explicit and EPIC finite element simulations. Both constitutive models show good quantitative agreement with experimental perforation velocity and residual projectile velocity characteristics over the range of plate thicknesses tested. For thin plates, both experiments and numerical calculations show transition from large plastic deformation to lower energy perforation modes (localized fracture) for increasing impact velocity. The ISV model tends to accurately predict the shear-plug dominated perforation modes for all target thicknesses and impact velocities, while the JC model inaccurately predicts target fragmentation at impact velocities significantly greater than a given plate’s ballistic limit. ISV model results show that void nucleation is more influential on damage evolution and fracture than void growth for Al 7085-T711 under ballistic impact loads, however each contributes to the fracture mechanism.
- 23 August 2024
- Published by SAGE Publications in International Journal of Protective Structures
- Vol. 16 (3) , 707-733
Evaluation of two constitutive modeling approaches for finite element simulation of ballistic impact of varying thickness monolithic aluminum plates by steel spheres
A comparison of material models for numerical simulations of ballistic impact is performed to study a physics motivated model’s efficacy in overcoming the limitations of traditional empirical models in accurately capturing dynamic deformation and failure mechanisms. The ballistic impact of Aluminum 7085-T711 alloy plates struck by hardened steel projectiles has been modeled using Johnson-Cook (JC) and an Internal State Variable (ISV) constitutive model, DMG, embedded in Abaqus Explicit and EPIC finite element simulations. Both constitutive models show good quantitative agreement with experimental perforation velocity and residual projectile velocity characteristics over the range of plate thicknesses tested. For thin plates, both experiments and numerical calculations show transition from large plastic deformation to lower energy perforation modes (localized fracture) for increasing impact velocity. The ISV model tends to accurately predict the shear-plug dominated perforation modes for all target thicknesses and impact velocities, while the JC model inaccurately predicts target fragmentation at impact velocities significantly greater than a given plate’s ballistic limit. ISV model results show that void nucleation is more influential on damage evolution and fracture than void growth for Al 7085-T711 under ballistic impact loads, however each contributes to the fracture mechanism.
- 1 January 2018
- Published by Begell House Inc. Publishers in International Journal for Multiscale Computational Engineering
- Vol. 16 (2) , 143-161
A MULTISCALE MESH-FREE APPROACH TO MODELING DAMAGE OF AN ULTRA-HIGH-PERFORMANCE CONCRETE
A multiscale meshfree formulation based on the reproducing kernel particle method (RKPM) is used to develop a damage model for ultra-high performance concrete (UHPC). The damage evolution law is derived from the Helmholtz free energy where the energy released from the cracked microstructure is equated to the homogenized macroscale response at the continuum level. In order to perform the microscale calculations for UHPC, the fracture energy of the UHPC must be determined. In this study, the fracture energy of a UHPC is experimentally determined by performing single-edge notched three-point beam tests. The fracture energy is required in order to perform physically-based RKPM microscale calculations. The damage evolution law is then determined from the microscale calculations and applied to a quasi-static macroscale RKPM calculation. The multiscale framework is compared to a typical phenomological damage model to show its ability to accurately reproduce softening behavior that exists under loading of a UHPC.
- 1 January 2018
- Published by Begell House Inc. Publishers in International Journal for Multiscale Computational Engineering
- Vol. 16 (2) , 143-161
A MULTISCALE MESH-FREE APPROACH TO MODELING DAMAGE OF AN ULTRA-HIGH-PERFORMANCE CONCRETE
A multiscale meshfree formulation based on the reproducing kernel particle method (RKPM) is used to develop a damage model for ultra-high performance concrete (UHPC). The damage evolution law is derived from the Helmholtz free energy where the energy released from the cracked microstructure is equated to the homogenized macroscale response at the continuum level. In order to perform the microscale calculations for UHPC, the fracture energy of the UHPC must be determined. In this study, the fracture energy of a UHPC is experimentally determined by performing single-edge notched three-point beam tests. The fracture energy is required in order to perform physically-based RKPM microscale calculations. The damage evolution law is then determined from the microscale calculations and applied to a quasi-static macroscale RKPM calculation. The multiscale framework is compared to a typical phenomological damage model to show its ability to accurately reproduce softening behavior that exists under loading of a UHPC.
- Open Access
- 20 January 2011
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 184 (3) , 1023-1036
Application of the Bammann inelasticity internal state variable constitutive model to geological materials
- 20 January 2011
- Published by Oxford University Press (OUP) in Geophysical Journal International
- Vol. 184 (3) , 1023-1036
Open AccessApplication of the Bammann inelasticity internal state variable constitutive model to geological materials