S. Macrae Montgomery
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
S. Macrae Montgomery has a total of 43 co-authors. Here are the top co-authors by number of shared publications:
- Hang Jerry Qi
Georgia Institute of Technology
10 shared publications - Liang Yue
The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
5 shared publications Yuyang Song
Toyota Research Institute of North America, Toyota Motor North America, Ann Arbor, USA
4 shared publicationsLuxia Yu
The George W. Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332, USA
3 shared publications- Masato Tanaka
Toyota Central R&D Labs., Inc., 41-1 Yokomichi, Nagakute, Aichi, 480-1192, Japan
3 shared publications - Tsuyoshi Nomura
Toyota Central R&D Labs., Inc., Nagakute, Japan
3 shared publications
Latest Publications
- Open Access
- 26 July 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (30)
Computational synthesis of locomotive soft robots by topology optimization
Locomotive soft robots (SoRos) have gained prominence due to their adaptability. Traditional locomotive SoRo design is based on limb structures inspired by biological organisms and requires human intervention. Evolutionary robotics, designed using evolutionary algorithms (EAs), have shown potential for automatic design. However, EA-based methods face the challenge of high computational cost when considering multiphysics in locomotion, including materials, actuations, and interactions with environments. Here, we present a design approach for pneumatic SoRos that integrates gradient-based topology optimization with multiphysics material point method (MPM) simulations. This approach starts with a simple initial shape (a cube with a central cavity). The topology optimization with MPM then automatically and iteratively designs the SoRo shape. We design two SoRos, one for walking and one for climbing. These SoRos are 3D printed and exhibit the same locomotion features as in the simulations. This study presents an efficient strategy for designing SoRos, demonstrating that a purely mathematical process can produce limb-like structures seen in biological organisms.
- 26 July 2024
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 10 (30)
Open AccessComputational synthesis of locomotive soft robots by topology optimization
Locomotive soft robots (SoRos) have gained prominence due to their adaptability. Traditional locomotive SoRo design is based on limb structures inspired by biological organisms and requires human intervention. Evolutionary robotics, designed using evolutionary algorithms (EAs), have shown potential for automatic design. However, EA-based methods face the challenge of high computational cost when considering multiphysics in locomotion, including materials, actuations, and interactions with environments. Here, we present a design approach for pneumatic SoRos that integrates gradient-based topology optimization with multiphysics material point method (MPM) simulations. This approach starts with a simple initial shape (a cube with a central cavity). The topology optimization with MPM then automatically and iteratively designs the SoRo shape. We design two SoRos, one for walking and one for climbing. These SoRos are 3D printed and exhibit the same locomotion features as in the simulations. This study presents an efficient strategy for designing SoRos, demonstrating that a purely mathematical process can produce limb-like structures seen in biological organisms.
- Open Access
- 6 October 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (40) , eadi2958
Low-temperature 3D printing of transparent silica glass microstructures
Transparent silica glass is one of the most essential materials used in society and industry, owing to its exceptional optical, thermal, and chemical properties. However, glass is extremely difficult to shape, especially into complex and miniaturized structures. Recent advances in three-dimensional (3D) printing have allowed for the creation of glass structures, but these methods involve time-consuming and high-temperature processes. Here, we report a photochemistry-based strategy for making glass structures of micrometer size under mild conditions. Our technique uses a photocurable polydimethylsiloxane resin that is 3D printed into complex structures and converted to silica glass via deep ultraviolet (DUV) irradiation in an ozone environment. The unique DUV-ozone conversion process for silica microstructures is low temperature (~220°C) and fast (<5 hours). The printed silica glass is highly transparent with smooth surface, comparable to commercial fused silica glass. This work enables the creation of arbitrary structures in silica glass through photochemistry and opens opportunities in unexplored territories for glass processing techniques.
- 6 October 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (40) , eadi2958
Open AccessLow-temperature 3D printing of transparent silica glass microstructures
Transparent silica glass is one of the most essential materials used in society and industry, owing to its exceptional optical, thermal, and chemical properties. However, glass is extremely difficult to shape, especially into complex and miniaturized structures. Recent advances in three-dimensional (3D) printing have allowed for the creation of glass structures, but these methods involve time-consuming and high-temperature processes. Here, we report a photochemistry-based strategy for making glass structures of micrometer size under mild conditions. Our technique uses a photocurable polydimethylsiloxane resin that is 3D printed into complex structures and converted to silica glass via deep ultraviolet (DUV) irradiation in an ozone environment. The unique DUV-ozone conversion process for silica microstructures is low temperature (~220°C) and fast (<5 hours). The printed silica glass is highly transparent with smooth surface, comparable to commercial fused silica glass. This work enables the creation of arbitrary structures in silica glass through photochemistry and opens opportunities in unexplored territories for glass processing techniques.
- Open Access
- 8 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Cold-programmed shape-morphing structures based on grayscale digital light processing 4D printing
Shape-morphing structures that can reconfigure their shape to adapt to diverse tasks are highly desirable for intelligent machines in many interdisciplinary fields. Shape memory polymers are one of the most widely used stimuli-responsive materials, especially in 3D/4D printing, for fabricating shape-morphing systems. They typically go through a hot-programming step to obtain the shape-morphing capability, which possesses limited freedom of reconfigurability. Cold-programming, which directly deforms the structure into a temporary shape without increasing the temperature, is simple and more versatile but has stringent requirements on material properties. Here, we introduce grayscale digital light processing (g-DLP) based 3D printing as a simple and effective platform for fabricating shape-morphing structures with cold-programming capabilities. With the multimaterial-like printing capability of g-DLP, we develop heterogeneous hinge modules that can be cold-programmed by simply stretching at room temperature. Different configurations can be encoded during 3D printing with the variable distribution and direction of the modular-designed hinges. The hinge module allows controllable independent morphing enabled by cold programming. By leveraging the multimaterial-like printing capability, multi-shape morphing structures are presented. The g-DLP printing with cold-programming morphing strategy demonstrates enormous potential in the design and fabrication of shape-morphing structures.
- 8 September 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-11
Open AccessCold-programmed shape-morphing structures based on grayscale digital light processing 4D printing
Shape-morphing structures that can reconfigure their shape to adapt to diverse tasks are highly desirable for intelligent machines in many interdisciplinary fields. Shape memory polymers are one of the most widely used stimuli-responsive materials, especially in 3D/4D printing, for fabricating shape-morphing systems. They typically go through a hot-programming step to obtain the shape-morphing capability, which possesses limited freedom of reconfigurability. Cold-programming, which directly deforms the structure into a temporary shape without increasing the temperature, is simple and more versatile but has stringent requirements on material properties. Here, we introduce grayscale digital light processing (g-DLP) based 3D printing as a simple and effective platform for fabricating shape-morphing structures with cold-programming capabilities. With the multimaterial-like printing capability of g-DLP, we develop heterogeneous hinge modules that can be cold-programmed by simply stretching at room temperature. Different configurations can be encoded during 3D printing with the variable distribution and direction of the modular-designed hinges. The hinge module allows controllable independent morphing enabled by cold programming. By leveraging the multimaterial-like printing capability, multi-shape morphing structures are presented. The g-DLP printing with cold-programming morphing strategy demonstrates enormous potential in the design and fabrication of shape-morphing structures.
- 4 July 2023
- Published by Elsevier in Additive Manufacturing
- Vol. 73
Locally patterned anisotropy using grayscale vat photopolymerization
- 4 July 2023
- Published by Elsevier in Additive Manufacturing
- Vol. 73
Locally patterned anisotropy using grayscale vat photopolymerization
- Top Cited PapersOpen Access
- 6 March 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-12
Single-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability
Multimaterial additive manufacturing has important applications in various emerging fields. However, it is very challenging due to material and printing technology limitations. Here, we present a resin design strategy that can be used for single-vat single-cure grayscale digital light processing (g-DLP) 3D printing where light intensity can locally control the conversion of monomers to form from a highly stretchable soft organogel to a stiff thermoset within in a single layer of printing. The high modulus contrast and high stretchability can be realized simultaneously in a monolithic structure at a high printing speed (z-direction height 1 mm/min). We further demonstrate that the capability can enable previously unachievable or hard-to-achieve 3D printed structures for biomimetic designs, inflatable soft robots and actuators, and soft stretchable electronics. This resin design strategy thus provides a material solution in multimaterial additive manufacture for a variety of emerging applications.
- 6 March 2023
- Published by Springer Nature in Nature Communications
- Vol. 14 (1) , 1-12
Top Cited PapersOpen AccessSingle-vat single-cure grayscale digital light processing 3D printing of materials with large property difference and high stretchability
Multimaterial additive manufacturing has important applications in various emerging fields. However, it is very challenging due to material and printing technology limitations. Here, we present a resin design strategy that can be used for single-vat single-cure grayscale digital light processing (g-DLP) 3D printing where light intensity can locally control the conversion of monomers to form from a highly stretchable soft organogel to a stiff thermoset within in a single layer of printing. The high modulus contrast and high stretchability can be realized simultaneously in a monolithic structure at a high printing speed (z-direction height 1 mm/min). We further demonstrate that the capability can enable previously unachievable or hard-to-achieve 3D printed structures for biomimetic designs, inflatable soft robots and actuators, and soft stretchable electronics. This resin design strategy thus provides a material solution in multimaterial additive manufacture for a variety of emerging applications.
- Top Cited Papers
- 12 February 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (17)
Pixel‐Level Grayscale Manipulation to Improve Accuracy in Digital Light Processing 3D Printing
Digital light processing (DLP) is a widely used additive manufacturing technique for functional applications due to its high accuracy and print speeds. However, a variety of factors such as pixel size, motion stage resolution, optical focus, and chemical properties of the resin limit DLP's minimum resolution. Recently, research into locally varying light intensities has led to the emergence of grayscale DLP printing, which offers new capabilities including sub‐pixel manipulation of the printed shape. Here, a methodology is developed to enhance accuracy beyond what is typically capable for a given projector resolution by using pixel‐level grayscale control to create round features from sharp pixels. A numerical representation of the DLP pixel shape is developed to account for the effects of the incident light patterns. A reaction‐diffusion model is then used to predict the printed shapes before and after grayscale enhancement. This model is used to determine the optimal pixel intensities to match a target shape. Finally, the minimum feature size allowed by the proposed method is explored. The promising results represent an important step forward in raising DLP printing to higher accuracy, which will allow the fabrication of functional and structural components with smaller features or smoother faces.
- 12 February 2023
- Published by Wiley in Advanced Functional Materials
- Vol. 33 (17)
Top Cited PapersPixel‐Level Grayscale Manipulation to Improve Accuracy in Digital Light Processing 3D Printing
Digital light processing (DLP) is a widely used additive manufacturing technique for functional applications due to its high accuracy and print speeds. However, a variety of factors such as pixel size, motion stage resolution, optical focus, and chemical properties of the resin limit DLP's minimum resolution. Recently, research into locally varying light intensities has led to the emergence of grayscale DLP printing, which offers new capabilities including sub‐pixel manipulation of the printed shape. Here, a methodology is developed to enhance accuracy beyond what is typically capable for a given projector resolution by using pixel‐level grayscale control to create round features from sharp pixels. A numerical representation of the DLP pixel shape is developed to account for the effects of the incident light patterns. A reaction‐diffusion model is then used to predict the printed shapes before and after grayscale enhancement. This model is used to determine the optimal pixel intensities to match a target shape. Finally, the minimum feature size allowed by the proposed method is explored. The promising results represent an important step forward in raising DLP printing to higher accuracy, which will allow the fabrication of functional and structural components with smaller features or smoother faces.
- 10 February 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (6) , eade4381
Turing pattern–based design and fabrication of inflatable shape-morphing structures
Turing patterns are self-organizing stripes or spots widely found in biological systems and nature. Although inspiring, their applications are limited. Inflatable shape-morphing structures have attracted substantial research attention. Traditional inflatable structures use isotropic materials with geometrical features to achieve shape morphing. Recently, gradient-based optimization methods have been used to design these structures. These methods assume anisotropic materials whose orientation can vary freely. However, this assumption makes fabrication a considerable challenge by methods such as additive manufacturing, which print isotropic materials. Here, we present a methodology of using Turing patterns to bridge this gap. Specifically, we use Turing patterns to convert a design with distributed anisotropic materials to a distribution with two materials, which can be fabricated by grayscale digital light processing 3D printing. This work suggests that it is possible to apply patterns in biological systems and nature to engineering composites and offers new concepts for future material design.
- 10 February 2023
- Published by American Association for the Advancement of Science (AAAS) in Science Advances
- Vol. 9 (6) , eade4381
Turing pattern–based design and fabrication of inflatable shape-morphing structures
Turing patterns are self-organizing stripes or spots widely found in biological systems and nature. Although inspiring, their applications are limited. Inflatable shape-morphing structures have attracted substantial research attention. Traditional inflatable structures use isotropic materials with geometrical features to achieve shape morphing. Recently, gradient-based optimization methods have been used to design these structures. These methods assume anisotropic materials whose orientation can vary freely. However, this assumption makes fabrication a considerable challenge by methods such as additive manufacturing, which print isotropic materials. Here, we present a methodology of using Turing patterns to bridge this gap. Specifically, we use Turing patterns to convert a design with distributed anisotropic materials to a distribution with two materials, which can be fabricated by grayscale digital light processing 3D printing. This work suggests that it is possible to apply patterns in biological systems and nature to engineering composites and offers new concepts for future material design.
- 1 October 2021
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 48
Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing
- 1 October 2021
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 48
Design for the reduction of volume shrinkage-induced distortion in digital light processing 3D printing
- 1 July 2021
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 46
The 3D printing and modeling of functionally graded Kelvin foams for controlling crushing performance
- 1 July 2021
- Published by Elsevier in Extreme Mechanics Letters
- Vol. 46
The 3D printing and modeling of functionally graded Kelvin foams for controlling crushing performance
- Top Cited Papers
- 8 October 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (3)
Magneto‐Mechanical Metamaterials with Widely Tunable Mechanical Properties and Acoustic Bandgaps
Mechanical metamaterials are architected manmade materials that allow for unique behaviors not observed in nature, making them promising candidates for a wide range of applications. Existing metamaterials lack tunability as their properties can only be changed to a limited extent after the fabrication. Herein, a new magneto‐mechanical metamaterial is presented that allows great tunability through a novel concept of deformation mode branching. The architecture of this new metamaterial employs an asymmetric joint design using hard‐magnetic soft active materials that permits two distinct actuation modes (bending and folding) under opposite‐direction magnetic fields. The subsequent application of mechanical compression leads to the deformation mode branching where the metamaterial architecture transforms into two distinctly different shapes, which exhibit very different deformations and enable great tunability in properties such as mechanical stiffness and acoustic bandgaps. Furthermore, this metamaterial design can be incorporated with magnetic shape memory polymers with global stiffness tunability, which also allows for the global shift of the acoustic behaviors. The combination of magnetic and mechanical actuations, as well as shape memory effects, impart wide tunable properties to a new paradigm of metamaterials.
- 8 October 2020
- Published by Wiley in Advanced Functional Materials
- Vol. 31 (3)
Top Cited PapersMagneto‐Mechanical Metamaterials with Widely Tunable Mechanical Properties and Acoustic Bandgaps
Mechanical metamaterials are architected manmade materials that allow for unique behaviors not observed in nature, making them promising candidates for a wide range of applications. Existing metamaterials lack tunability as their properties can only be changed to a limited extent after the fabrication. Herein, a new magneto‐mechanical metamaterial is presented that allows great tunability through a novel concept of deformation mode branching. The architecture of this new metamaterial employs an asymmetric joint design using hard‐magnetic soft active materials that permits two distinct actuation modes (bending and folding) under opposite‐direction magnetic fields. The subsequent application of mechanical compression leads to the deformation mode branching where the metamaterial architecture transforms into two distinctly different shapes, which exhibit very different deformations and enable great tunability in properties such as mechanical stiffness and acoustic bandgaps. Furthermore, this metamaterial design can be incorporated with magnetic shape memory polymers with global stiffness tunability, which also allows for the global shift of the acoustic behaviors. The combination of magnetic and mechanical actuations, as well as shape memory effects, impart wide tunable properties to a new paradigm of metamaterials.