Peter Heidrich
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Peter Heidrich has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
- Thomas Greiner
Electrical Engineering & Information Technology, Hochschule Pforzheim, 64371 Pforzheim Germany
3 shared publications - Oliver Niklas Dieterle
Electrical Engineering & Information Technology, Hochschule Pforzheim, 64371 Pforzheim Germany 75175
2 shared publications - Oliver Dieterle1 shared publication
Latest Publications
- 1 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (10) , 9036-9045
Feedforward Compensation of Torque Ripples in Dual Three-Phase PMSM Fed From Separate DC Links With Different Voltage Levels
Multiphase permanent magnet synchronous machines (PMSM) with concentrated windings are gaining popularity in the development of fault-tolerant drives. The 12-slot/8-pole PMSM offers the possibility of forming two spatially separated 3-phase winding sets, where each spans half of the extent. Additionally, it is attractive in terms of the acoustic noise, that the radial magnetic stress is balanced for each quarter of the circumference. Unfortunately, there is no phase shift between the winding sets, which leads to additional torque ripple. A compensation using further construction measures is only partially possible. This paper discusses causes for the torque ripples in this type of PMSM. Besides magnetic saturation, additional torque ripples appear when the winding sets are fed by different DC links, which is necessary in some applications in order to increase the availability of the drive in case of a failure. For complete cancellation of the dominant torque harmonics a method for identification of harmonic voltages and currents is proposed. Using the measured angular acceleration as error signal, an adaptive narrowband filter is adjusted continuously to drive the harmonics to zero. The proposed method does neither suffer from nonlinearities due to magnetic saturation nor from model complexity due to the increased phase number.
- 1 October 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 68 (10) , 9036-9045
Feedforward Compensation of Torque Ripples in Dual Three-Phase PMSM Fed From Separate DC Links With Different Voltage Levels
Multiphase permanent magnet synchronous machines (PMSM) with concentrated windings are gaining popularity in the development of fault-tolerant drives. The 12-slot/8-pole PMSM offers the possibility of forming two spatially separated 3-phase winding sets, where each spans half of the extent. Additionally, it is attractive in terms of the acoustic noise, that the radial magnetic stress is balanced for each quarter of the circumference. Unfortunately, there is no phase shift between the winding sets, which leads to additional torque ripple. A compensation using further construction measures is only partially possible. This paper discusses causes for the torque ripples in this type of PMSM. Besides magnetic saturation, additional torque ripples appear when the winding sets are fed by different DC links, which is necessary in some applications in order to increase the availability of the drive in case of a failure. For complete cancellation of the dominant torque harmonics a method for identification of harmonic voltages and currents is proposed. Using the measured angular acceleration as error signal, an adaptive narrowband filter is adjusted continuously to drive the harmonics to zero. The proposed method does neither suffer from nonlinearities due to magnetic saturation nor from model complexity due to the increased phase number.
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 8783-8789
Feedforward Compensation of Torque Harmonics in Permanent Magnet Synchronous Machines
- 1 January 2020
- Published by Elsevier in IFAC-PapersOnLine
- Vol. 53 (2) , 8783-8789
Feedforward Compensation of Torque Harmonics in Permanent Magnet Synchronous Machines
- 10 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (1) , 685-695
Control of a PMSM With Quadruple Three-Phase Star-Connected Windings Under Inverter Short-Circuit Fault
This paper proposes a novel approach for the control of a permanent magnet synchronous machine with a quadruple 3-phase star-connected winding configuration after a short circuit-fault in one voltage source inverter. The approach includes an adaption of the closed-loop current control that allows to proceed the operation of the faulty unit without the need to adapt the reference currents. This allows an operation of the faulty drive with increased post-fault mean torque. Additionally, a strategy for post-fault torque error compensation is proposed, which can be used to reduce the torque ripple while the load distribution is better balanced. Results are respectively compared to the case when applying a symmetric short circuit to the faulty unit, which is the conventional strategy in case of a transistor short circuit-fault. The current limit of the drive is considered in all cases. The benefits of the approach are validated through experimental tests.
- 10 May 2018
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Industrial Electronics
- Vol. 66 (1) , 685-695
Control of a PMSM With Quadruple Three-Phase Star-Connected Windings Under Inverter Short-Circuit Fault
This paper proposes a novel approach for the control of a permanent magnet synchronous machine with a quadruple 3-phase star-connected winding configuration after a short circuit-fault in one voltage source inverter. The approach includes an adaption of the closed-loop current control that allows to proceed the operation of the faulty unit without the need to adapt the reference currents. This allows an operation of the faulty drive with increased post-fault mean torque. Additionally, a strategy for post-fault torque error compensation is proposed, which can be used to reduce the torque ripple while the load distribution is better balanced. Results are respectively compared to the case when applying a symmetric short circuit to the faulty unit, which is the conventional strategy in case of a transistor short circuit-fault. The current limit of the drive is considered in all cases. The benefits of the approach are validated through experimental tests.