Hassan Abbasi
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Hassan Abbasi has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Ata Hojatkashani
Islamic Azad Univ. South Tehran Branch
2 shared publications - Abbas Afshar
Department of Civil Engineering, Iran University of Science and Technology, Tehran, Iran
1 shared publication - Abbas Akbarpour
Department of Civil Engineering, South Tehran Branch, Islamic Azad University, Tehran, Iran
1 shared publication - Armin Aziminejad
Department of Civil Engineering, SR.C., Islamic Azad University, Tehran, Iran
1 shared publication - Erfan Najaf
Department of Civil and Environmental Engineering, University of Maine, Orono, ME 04469, USA
1 shared publication H. Jalaly
1 shared publication
Latest Publications
- Open Access
- 30 July 2024
- Published by Springer Nature in Research Square
A Novel Evolutionary Algorithm-Based Approach for Optimizing the Mix Design of High-Performance Fiber-Reinforced Concrete (HPFRCC)
With the increasing demand for high-performance concrete, optimizing the design of high-performance alloy-armed compounds (HPFRCC) has become a major challenge. Optimizing the mix design enables the achievement of the desired stability and ductility. This study offers an innovative way to overcome this challenge using artificial intelligence (AI). Our method uses artificial neural networks (ANN) to model the relationship between the mixed component and final HPFRCC properties. Then, we explored a wide design space using advanced distribution algorithms to determine the best combination. These algorithms are inspired by nature, such as the evolutionary algorithm (EO), which replicates the scientific evolutionary process. This study significantly reduces the need for laboratory testing by employing innovative methodologies. This significant achievement significantly optimizes design time and cost. In addition, by comprehensively comparing EO performance with other similar algorithms, the excellence and innovation of the method were demonstrated in optimizing the complex design of the HPFRCC mixture, and a new multitarget optimization algorithm called FC-MOEO/AE was used to predict the HPFRCC combination. This method can be used as a design guide to guide decision-making in the pre-construction stage.
- 30 July 2024
- Published by Springer Nature in Research Square
Open AccessA Novel Evolutionary Algorithm-Based Approach for Optimizing the Mix Design of High-Performance Fiber-Reinforced Concrete (HPFRCC)
With the increasing demand for high-performance concrete, optimizing the design of high-performance alloy-armed compounds (HPFRCC) has become a major challenge. Optimizing the mix design enables the achievement of the desired stability and ductility. This study offers an innovative way to overcome this challenge using artificial intelligence (AI). Our method uses artificial neural networks (ANN) to model the relationship between the mixed component and final HPFRCC properties. Then, we explored a wide design space using advanced distribution algorithms to determine the best combination. These algorithms are inspired by nature, such as the evolutionary algorithm (EO), which replicates the scientific evolutionary process. This study significantly reduces the need for laboratory testing by employing innovative methodologies. This significant achievement significantly optimizes design time and cost. In addition, by comprehensively comparing EO performance with other similar algorithms, the excellence and innovation of the method were demonstrated in optimizing the complex design of the HPFRCC mixture, and a new multitarget optimization algorithm called FC-MOEO/AE was used to predict the HPFRCC combination. This method can be used as a design guide to guide decision-making in the pre-construction stage.
- 1 October 2023
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Structures and Buildings
- Vol. 176 (10) , 833-844
Compressive loading of structural insulated panels and conventional stud walls: a study
Structural insulated panels (SIPs) are structural elements comprising a core of expanded polystyrene insulation sandwiched between two oriented strand boards. They can replace conventional joist floors and stud walls in low-rise residential construction. Three identical samples of full-scale SIP walls and stud walls were tested according to ASTM standards and experimental results for the specimens were obtained in terms of their ultimate load capacity and failure mechanism. Comparison of the load–deformation diagrams of the SIPs and stud walls showed that tangential stiffness variation of the former occurred in the hardening mode, whereas the variation for the latter was in two stages, hardening and softening. Regarding compressive loading, the results showed that SIPs are as good as conventional wood framing of the same size. Therefore, SIP walls are very efficient in the case of axial compressive loading.
- 1 October 2023
- Published by Emerald Publishing in Proceedings of the Institution of Civil Engineers - Structures and Buildings
- Vol. 176 (10) , 833-844
Compressive loading of structural insulated panels and conventional stud walls: a study
Structural insulated panels (SIPs) are structural elements comprising a core of expanded polystyrene insulation sandwiched between two oriented strand boards. They can replace conventional joist floors and stud walls in low-rise residential construction. Three identical samples of full-scale SIP walls and stud walls were tested according to ASTM standards and experimental results for the specimens were obtained in terms of their ultimate load capacity and failure mechanism. Comparison of the load–deformation diagrams of the SIPs and stud walls showed that tangential stiffness variation of the former occurred in the hardening mode, whereas the variation for the latter was in two stages, hardening and softening. Regarding compressive loading, the results showed that SIPs are as good as conventional wood framing of the same size. Therefore, SIP walls are very efficient in the case of axial compressive loading.
- Open Access
- 1 January 2022
- Published by Wiley in Advances in Civil Engineering
- Vol. 2022 (1)
Using Recycled Concrete Powder, Waste Glass Powder, and Plastic Powder to Improve the Mechanical Properties of Compacted Concrete: Cement Elimination Approach
The environment receives millions of tons of garbage, including plastic and glass, and concrete building debris contributes to a number of environmental problems. In order to reduce cement and make use of waste materials like glass and plastic, this research creates compacted concrete samples using waste glass powder, waste plastic powder, micro‐silica, fly ash, and recycled powdered concrete. Compressive, nonlinear behavior, and SEM tests on compacted specimens showed that by removing 80% of the cement and substituting 20% recycled concrete powder, 15% micro‐silica, 15% fly ash, 15% waste plastic powder, and 15% waste glass powder (at 80°C for 20 minutes), sustainable concrete with compressive and flexural strengths nearly equal to the sample’s compressive and flexural strengths was produced. Micro‐silica has several shortcomings regarding improving concrete strength and building a suitable combination with recycled concrete powder. In extremely small quantities, glass powder may be used to replace cement, and in greater quantities, it can take the place of aggregate. Finally, it was found that concrete mortar could be made completely sustainable by using recycled materials like glass, plastic, and recycled concrete, as well as micro‐silica and fly ash, and that only 20% of the weight of cement could be used without lowering the compressive and flexural strength of the concrete.
- 1 January 2022
- Published by Wiley in Advances in Civil Engineering
- Vol. 2022 (1)
Open AccessUsing Recycled Concrete Powder, Waste Glass Powder, and Plastic Powder to Improve the Mechanical Properties of Compacted Concrete: Cement Elimination Approach
The environment receives millions of tons of garbage, including plastic and glass, and concrete building debris contributes to a number of environmental problems. In order to reduce cement and make use of waste materials like glass and plastic, this research creates compacted concrete samples using waste glass powder, waste plastic powder, micro‐silica, fly ash, and recycled powdered concrete. Compressive, nonlinear behavior, and SEM tests on compacted specimens showed that by removing 80% of the cement and substituting 20% recycled concrete powder, 15% micro‐silica, 15% fly ash, 15% waste plastic powder, and 15% waste glass powder (at 80°C for 20 minutes), sustainable concrete with compressive and flexural strengths nearly equal to the sample’s compressive and flexural strengths was produced. Micro‐silica has several shortcomings regarding improving concrete strength and building a suitable combination with recycled concrete powder. In extremely small quantities, glass powder may be used to replace cement, and in greater quantities, it can take the place of aggregate. Finally, it was found that concrete mortar could be made completely sustainable by using recycled materials like glass, plastic, and recycled concrete, as well as micro‐silica and fly ash, and that only 20% of the weight of cement could be used without lowering the compressive and flexural strength of the concrete.
- 12 October 2021
- Published by Springer Nature in International Journal of Steel Structures
- Vol. 21 (6) , 1921-1936
Load Spread in Gusset Plates Connected with One and Two Bolts
- 12 October 2021
- Published by Springer Nature in International Journal of Steel Structures
- Vol. 21 (6) , 1921-1936
Load Spread in Gusset Plates Connected with One and Two Bolts
- 20 April 2021
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 26 (11) , 5428-5464
Developing a multi-variable vulnerability function for a class of multi-span continuous concrete box-girder highway bridges with emphasis on near-field earthquakes
The most common tools in seismic performance assessment of highway bridges are single-variable fragility curves. However, fragility curves are not confidently reliable due to utilizing only a single intensity measure (IM). Alternatively, single- and multi-variable vulnerability functions, of which the latter is scarce and rather complex, have been proposed for that purpose, yet without considering the effects of the strong vertical component of near-field earthquakes. This study aimed to develop a multi-variable vulnerability function for multi-span continuous concrete box-girder bridges, accentuating near-field earthquakes. Ten bridge models corresponding to the 1971-1990 design era were considered and analyzed, subjected to three-component records of 164 earthquakes using OpenSees framework. First, 28 IMs related to horizontal and vertical ground motions, and 12 engineering demand parameters were utilized, and a set of potentially optimal IMs were determined through optimality investigation. Then, to ensure that identified IMs are authentically optimal candidates, Lasso regression was employed, introducing 12 IMs as optimal. Finally, Step-wise regressions were conducted to reduce the complexity of the proposed equation. Results revealed peak ground acceleration, peak ground velocity, and velocity spectrum intensity of the horizontal component of ground motion, and acceleration spectrum intensities of both horizontal and vertical components as optimal ones.
- 20 April 2021
- Published by Taylor & Francis in European Journal of Environmental and Civil Engineering
- Vol. 26 (11) , 5428-5464
Developing a multi-variable vulnerability function for a class of multi-span continuous concrete box-girder highway bridges with emphasis on near-field earthquakes
The most common tools in seismic performance assessment of highway bridges are single-variable fragility curves. However, fragility curves are not confidently reliable due to utilizing only a single intensity measure (IM). Alternatively, single- and multi-variable vulnerability functions, of which the latter is scarce and rather complex, have been proposed for that purpose, yet without considering the effects of the strong vertical component of near-field earthquakes. This study aimed to develop a multi-variable vulnerability function for multi-span continuous concrete box-girder bridges, accentuating near-field earthquakes. Ten bridge models corresponding to the 1971-1990 design era were considered and analyzed, subjected to three-component records of 164 earthquakes using OpenSees framework. First, 28 IMs related to horizontal and vertical ground motions, and 12 engineering demand parameters were utilized, and a set of potentially optimal IMs were determined through optimality investigation. Then, to ensure that identified IMs are authentically optimal candidates, Lasso regression was employed, introducing 12 IMs as optimal. Finally, Step-wise regressions were conducted to reduce the complexity of the proposed equation. Results revealed peak ground acceleration, peak ground velocity, and velocity spectrum intensity of the horizontal component of ground motion, and acceleration spectrum intensities of both horizontal and vertical components as optimal ones.
- 14 November 2009
- Published by IWA Publishing in Journal of Hydroinformatics
- Vol. 12 (2) , 212-224
Ant-colony-based simulation–optimization modeling for the design of a forced water pipeline system considering the effects of dynamic pressures
Valve and pump shut-off in water pipeline systems lead to transient flow. This flow is a complex phenomenon and is potentially a very serious problem causing extra dynamic pressure in the system. Within the last few decades, the evolutionary and meta-heuristic algorithms, such as genetic algorithms, simulated annealing. More recently, however, ant-colony optimization algorithms have received considerable attention. In this paper the procedure and application of the ant-colony optimization algorithm to the design of a water supply pipeline system, considering dynamic pressures arising from valve closure, is presented. A simulation–optimization interaction loop (SOIL) is defined that cycles between the steady-state and transient flow modules to describe the hydraulics of the pipeline and ant colony optimization algorithm. A hydraulic simulation module is coupled with the ant colony optimization algorithm to form an efficient and powerful software program which locates the pumping stations at any possible or predefined locations while optimizing their specifications, along with pipe diameters, at each decision point. The model may equally regard or disregard the dynamic pressures. Two examples are provided to illustrate the proposed methodology which is limited to the solution of any gravity and/or forced water supply pipeline which is typical for water supply systems.
- 14 November 2009
- Published by IWA Publishing in Journal of Hydroinformatics
- Vol. 12 (2) , 212-224
Ant-colony-based simulation–optimization modeling for the design of a forced water pipeline system considering the effects of dynamic pressures
Valve and pump shut-off in water pipeline systems lead to transient flow. This flow is a complex phenomenon and is potentially a very serious problem causing extra dynamic pressure in the system. Within the last few decades, the evolutionary and meta-heuristic algorithms, such as genetic algorithms, simulated annealing. More recently, however, ant-colony optimization algorithms have received considerable attention. In this paper the procedure and application of the ant-colony optimization algorithm to the design of a water supply pipeline system, considering dynamic pressures arising from valve closure, is presented. A simulation–optimization interaction loop (SOIL) is defined that cycles between the steady-state and transient flow modules to describe the hydraulics of the pipeline and ant colony optimization algorithm. A hydraulic simulation module is coupled with the ant colony optimization algorithm to form an efficient and powerful software program which locates the pumping stations at any possible or predefined locations while optimizing their specifications, along with pipe diameters, at each decision point. The model may equally regard or disregard the dynamic pressures. Two examples are provided to illustrate the proposed methodology which is limited to the solution of any gravity and/or forced water supply pipeline which is typical for water supply systems.
- 19 May 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 1-10
Numerical Dynamic Analysis of Sonnateh Dam Body Located on an Active Fault
The design of dam body for an earthfill dam is the most important analysis in dam study. The Sonnateh dam is located on an active fault with measured deflections. The dam body analyses are performed based on two methods in order to reach a suitable slope for upstream and downstream of dam body. The upstream and downstream slope of dam body is calculated based on optimal analyses of dam body in different load conditions with linear and nonlinear determination. The two dimensional analysis of dam body with MCL and MDL is performed by GEO-SLOPE program. This analysis was a preliminary determination of dam body dimensions. The amount of safety factor and steady displacement of dam body is calculated during the earthquake. Also, the three dimensional analysis of fault movement is performed using ANSYS finite element based program. This analysis indicated the displacement of dam body which has to compare with allowable displacement of clay core. Based on this analysis, the safety factor of dam body is determined.
- 19 May 2006
- Published by American Society of Civil Engineers (ASCE)
- p. 1-10
Numerical Dynamic Analysis of Sonnateh Dam Body Located on an Active Fault
The design of dam body for an earthfill dam is the most important analysis in dam study. The Sonnateh dam is located on an active fault with measured deflections. The dam body analyses are performed based on two methods in order to reach a suitable slope for upstream and downstream of dam body. The upstream and downstream slope of dam body is calculated based on optimal analyses of dam body in different load conditions with linear and nonlinear determination. The two dimensional analysis of dam body with MCL and MDL is performed by GEO-SLOPE program. This analysis was a preliminary determination of dam body dimensions. The amount of safety factor and steady displacement of dam body is calculated during the earthquake. Also, the three dimensional analysis of fault movement is performed using ANSYS finite element based program. This analysis indicated the displacement of dam body which has to compare with allowable displacement of clay core. Based on this analysis, the safety factor of dam body is determined.