Robert Lee Chin
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Robert Lee Chin has a total of 22 co-authors. Here are the top co-authors by number of shared publications:
- Ziv Hameiri
School of Photovoltaic and Renewable Energy Engineering University of New South Wales Sydney New South Wales Australia
6 shared publications - Thorsten Trupke
The University of New South Wales Sydney Australia
4 shared publications - Michael Pollard
Institute of Chemical Technology and Polymer Chemistry Karlsruhe Institute of Technology (KIT) Engesserstraße 18 76131 Karlsruhe Germany
2 shared publications - Yan Zhu
University of New South Wales
2 shared publications - Alexander Gu
University of New South Wales, Sydney, NSW 2052, Australia
1 shared publication - Anita Ho-Baillie
The University of Sydney
1 shared publication
Latest Publications
- Open Access
- 17 June 2025
- Published by Wiley in Progress in Photovoltaics: Research and Applications
Dynamic Calibration of Injection‐Dependent Carrier Lifetime From Time‐Resolved Photoluminescence of Thin‐Film Photovoltaic Semiconductors
Time‐resolved photoluminescence is widely used to measure the charge carrier lifetime of thin film semiconductor materials. Nevertheless, the essential injection dependency of the carrier lifetime, which is hidden in these measurements, is often neglected. In this study, a novel dynamic calibration method is proposed to extract injection‐dependent carrier lifetime from time‐resolved photoluminescence measurements. The proposed method is based on the combination of transient and steady‐state measurements. The measured relative photoluminescence signal is converted into excess carrier concentration; thus, the injection dependency of the carrier lifetime can be extracted. The method is demonstrated experimentally using a perovskite thin film. The obtained injection‐dependent lifetime can be used to investigate the recombination mechanisms within the sample and to predict the potential current–voltage curve of solar cells made from the film. The proposed method significantly expands the capability of time‐resolved photoluminescence and provides numerous applications for a wide range of emerging photovoltaic materials.
- 17 June 2025
- Published by Wiley in Progress in Photovoltaics: Research and Applications
Open AccessDynamic Calibration of Injection‐Dependent Carrier Lifetime From Time‐Resolved Photoluminescence of Thin‐Film Photovoltaic Semiconductors
Time‐resolved photoluminescence is widely used to measure the charge carrier lifetime of thin film semiconductor materials. Nevertheless, the essential injection dependency of the carrier lifetime, which is hidden in these measurements, is often neglected. In this study, a novel dynamic calibration method is proposed to extract injection‐dependent carrier lifetime from time‐resolved photoluminescence measurements. The proposed method is based on the combination of transient and steady‐state measurements. The measured relative photoluminescence signal is converted into excess carrier concentration; thus, the injection dependency of the carrier lifetime can be extracted. The method is demonstrated experimentally using a perovskite thin film. The obtained injection‐dependent lifetime can be used to investigate the recombination mechanisms within the sample and to predict the potential current–voltage curve of solar cells made from the film. The proposed method significantly expands the capability of time‐resolved photoluminescence and provides numerous applications for a wide range of emerging photovoltaic materials.
- Open Access
- 15 January 2024
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 33 (1) , 109-115
Surface saturation current densities of perovskite thin films from Suns‐photoluminescence quantum yield measurements
We present a simple yet powerful analysis of Suns‐photoluminescence quantum yield measurements that can be used to determine the surface saturation current densities of thin film semiconductors. We apply the method to state‐of‐the‐art polycrystalline perovskite thin films of varying absorber thickness. We show that the non‐radiative bimolecular recombination in these samples originates from the surfaces. To the best of our knowledge, this is the first study to demonstrate and quantify non‐linear (bimolecular) surface recombination in perovskite thin films.
- 15 January 2024
- Published by Wiley in Progress in Photovoltaics: Research and Applications
- Vol. 33 (1) , 109-115
Open AccessSurface saturation current densities of perovskite thin films from Suns‐photoluminescence quantum yield measurements
We present a simple yet powerful analysis of Suns‐photoluminescence quantum yield measurements that can be used to determine the surface saturation current densities of thin film semiconductors. We apply the method to state‐of‐the‐art polycrystalline perovskite thin films of varying absorber thickness. We show that the non‐radiative bimolecular recombination in these samples originates from the surfaces. To the best of our knowledge, this is the first study to demonstrate and quantify non‐linear (bimolecular) surface recombination in perovskite thin films.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Dynamic Calibration of Injection Dependent Carrier Lifetime from Time-Resolved Photoluminescence
Time-resolved photoluminescence is widely used to measure the charge carrier lifetime of thin film semiconductor materials. Nevertheless, the essential injection dependency of the carrier lifetime, which is hidden in these measurements, is often neglected. In this study, a novel dynamic calibration method is proposed to extract injection-dependent carrier lifetime from time-resolved photoluminescence measurements. The proposed method is based on the combination of transient and steady-state measurements. The measured relative photoluminescence signal is calibrated into excess carrier concentration, hence, the injection dependency of the carrier lifetime can be extracted. The method is demonstrated experimentally using a perovskite thin film. The obtained injection-dependent lifetime is then fitted to investigate the recombination mechanisms within this sample. This proposed method significantly leverages the capability of time-resolved photoluminescence and provides many potential applications for a wide range of emerging photovoltaic materials.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Dynamic Calibration of Injection Dependent Carrier Lifetime from Time-Resolved Photoluminescence
Time-resolved photoluminescence is widely used to measure the charge carrier lifetime of thin film semiconductor materials. Nevertheless, the essential injection dependency of the carrier lifetime, which is hidden in these measurements, is often neglected. In this study, a novel dynamic calibration method is proposed to extract injection-dependent carrier lifetime from time-resolved photoluminescence measurements. The proposed method is based on the combination of transient and steady-state measurements. The measured relative photoluminescence signal is calibrated into excess carrier concentration, hence, the injection dependency of the carrier lifetime can be extracted. The method is demonstrated experimentally using a perovskite thin film. The obtained injection-dependent lifetime is then fitted to investigate the recombination mechanisms within this sample. This proposed method significantly leverages the capability of time-resolved photoluminescence and provides many potential applications for a wide range of emerging photovoltaic materials.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Predicting Damp Heat Degradation In Heterojunction PV Modules Using Machine Learning
Due to the ongoing advancements in the efficiency of solar cells, photovoltaic-generated electricity is now the most affordable energy source globally. Nevertheless, to unlock the full potential of photovoltaic systems, their reliability needs to be improved. The capability to accurately predict the performance of photovoltaic modules over their years of operation using fast and cheap methods can be a game changer. In this study, the performance of photovoltaic modules is monitored during 1,500 hours of damp heat testing. Classical machine learning models were then developed to predict their performance at the end of the test, using ONLY 10% of the measurements. This research represents a crucial step toward predicting the long-term performance of photovoltaic modules in the field, a capability that will revolutionize the photovoltaic industry.
- 11 June 2023
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-3
Predicting Damp Heat Degradation In Heterojunction PV Modules Using Machine Learning
Due to the ongoing advancements in the efficiency of solar cells, photovoltaic-generated electricity is now the most affordable energy source globally. Nevertheless, to unlock the full potential of photovoltaic systems, their reliability needs to be improved. The capability to accurately predict the performance of photovoltaic modules over their years of operation using fast and cheap methods can be a game changer. In this study, the performance of photovoltaic modules is monitored during 1,500 hours of damp heat testing. Classical machine learning models were then developed to predict their performance at the end of the test, using ONLY 10% of the measurements. This research represents a crucial step toward predicting the long-term performance of photovoltaic modules in the field, a capability that will revolutionize the photovoltaic industry.
- 10 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 12 (3) , 778-786
Bulk Lifetime and Doping in Crystalline Silicon via Two-Photon Absorption Time-Resolved Photoluminescence Decay
Bulk lifetime ( $\tau _{\text{bulk}}$ ) and bulk doping ( $N_{\text{dop}}$ ) are critical material parameters influencing solar cell performance. The ability to probe spatial variations in $\tau _{\text{bulk}}$ and $N_{\text{dop}}$ in ingots, prior to wafer cutting and further processing, would be beneficial to improving the yield and reducing the cost of silicon solar cells. This study demonstrates the capability of the two-photon time-resolved photoluminescence decay method to determine both $\tau _{\text{bulk}}$ and $N_{\text{dop}}$ in thick crystalline silicon samples. The use of two photon excitation enables a more uniform carrier generation profile compared to conventional single-photon excitation, making measurements less sensitive to surface effects. The method is verified using an unpassivated $n$ -type Czochralski silicon disk and found to be in good agreement with the results obtained from the photoluminescence ratio imaging method.
- 10 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 12 (3) , 778-786
Bulk Lifetime and Doping in Crystalline Silicon via Two-Photon Absorption Time-Resolved Photoluminescence Decay
Bulk lifetime ( $\tau _{\text{bulk}}$ ) and bulk doping ( $N_{\text{dop}}$ ) are critical material parameters influencing solar cell performance. The ability to probe spatial variations in $\tau _{\text{bulk}}$ and $N_{\text{dop}}$ in ingots, prior to wafer cutting and further processing, would be beneficial to improving the yield and reducing the cost of silicon solar cells. This study demonstrates the capability of the two-photon time-resolved photoluminescence decay method to determine both $\tau _{\text{bulk}}$ and $N_{\text{dop}}$ in thick crystalline silicon samples. The use of two photon excitation enables a more uniform carrier generation profile compared to conventional single-photon excitation, making measurements less sensitive to surface effects. The method is verified using an unpassivated $n$ -type Czochralski silicon disk and found to be in good agreement with the results obtained from the photoluminescence ratio imaging method.
- 13 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 10 (2) , 585-594
Photoluminescence-Based Spatially Resolved Temperature Coefficient Maps of Silicon Wafers and Solar Cells
In this article, we present a method to obtain implied open-circuit voltage images of silicon wafers and cells at different temperatures. The proposed method is then demonstrated by investigating the temperature coefficients of various regions across multicrystalline silicon wafers and cells from different heights of two bricks with different dislocation densities. Interestingly, both low and high temperature coefficients are found in dislocated regions on the wafers. A large spread of temperature coefficient is observed at regions with similar performance at 298 K. Reduced temperature sensitivity is found to be correlated with the increasing brick height and is exhibited by both wafers and cells. This may indicate that cells made from the top of the brick, although having higher defect concentration, actually suffer relatively less degradation in the performance at higher temperatures.
- 13 December 2019
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Photovoltaics
- Vol. 10 (2) , 585-594
Photoluminescence-Based Spatially Resolved Temperature Coefficient Maps of Silicon Wafers and Solar Cells
In this article, we present a method to obtain implied open-circuit voltage images of silicon wafers and cells at different temperatures. The proposed method is then demonstrated by investigating the temperature coefficients of various regions across multicrystalline silicon wafers and cells from different heights of two bricks with different dislocation densities. Interestingly, both low and high temperature coefficients are found in dislocated regions on the wafers. A large spread of temperature coefficient is observed at regions with similar performance at 298 K. Reduced temperature sensitivity is found to be correlated with the increasing brick height and is exhibited by both wafers and cells. This may indicate that cells made from the top of the brick, although having higher defect concentration, actually suffer relatively less degradation in the performance at higher temperatures.