Galiya Abdilova
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Galiya Abdilova has a total of 87 co-authors. Here are the top co-authors by number of shared publications:
- B. B. Kabulov
NPJSC «Shakarim University
8 shared publications - Kairat Bekbayev
Research School of Food Engineering, Shakarim University, Semey, Kazakhstan
6 shared publications - N. K. Ibragimov
Shakarim University of Semey
6 shared publications - A. Kassenov
S. Seifullin Kazakh Agrotechnical University
5 shared publications - B. A. Lobasenko
Kemerovo State University
5 shared publications - M. Shayakhmetova
Shakarim University of Semey
5 shared publications
Latest Publications
- Open Access
- 29 July 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 2(22),p. 50-58
DEVELOPMENT AND IMPLEMENTATION OF AN AUTOMATED CONTROL SYSTEM FOR SUGAR EXTRACTION FROM WHEAT STRAW BASED ON MATHEMATICAL MODELING OF ACID AND ENZYMATIC HYDROLYSIS
The study presents the development and experimental verification of an automated control system for the two-stage hydrolysis of wheat straw, implemented through the integration of a dynamic kinetic model into a model predictive control framework. The control object is characterized by nonlinear dynamics, the presence of technological constraints, and sensitivity to variations in feedstock composition, including cellulose, hemicellulose, and lignin content, which justifies the application of predictive control methods. The structure of the control system is based on a hierarchical architecture: local PID controllers ensure stabilization of temperature and pH conditions, while model predictive control optimizes control actions according to the criterion of maximizing sugar yield under constraints on temperature, pressure, and processing time. The mathematical model includes the kinetics of acid hydrolysis (hemicellulose-xylosefurfural) and the enzymatic stage based on a modified Michaelis-Menten equation accounting for enzyme inhibition and deactivation. Control is implemented using a discrete state-space model with a time step of 1 minute, taking into account transient processes. The system is implemented on a programmable logic controller platform with SCADA integration for data acquisition and visualization. Experimental validation demonstrated an increase in sugar yield up to 76-85%, a reduction in the coefficient of variation to 4%, a decrease in inhibitor concentration, reduced stabilization time and energy consumption, as well as robustness to disturbances and variations in feedstock composition.
- 29 July 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 2(22),p. 50-58
Open AccessDEVELOPMENT AND IMPLEMENTATION OF AN AUTOMATED CONTROL SYSTEM FOR SUGAR EXTRACTION FROM WHEAT STRAW BASED ON MATHEMATICAL MODELING OF ACID AND ENZYMATIC HYDROLYSIS
The study presents the development and experimental verification of an automated control system for the two-stage hydrolysis of wheat straw, implemented through the integration of a dynamic kinetic model into a model predictive control framework. The control object is characterized by nonlinear dynamics, the presence of technological constraints, and sensitivity to variations in feedstock composition, including cellulose, hemicellulose, and lignin content, which justifies the application of predictive control methods. The structure of the control system is based on a hierarchical architecture: local PID controllers ensure stabilization of temperature and pH conditions, while model predictive control optimizes control actions according to the criterion of maximizing sugar yield under constraints on temperature, pressure, and processing time. The mathematical model includes the kinetics of acid hydrolysis (hemicellulose-xylosefurfural) and the enzymatic stage based on a modified Michaelis-Menten equation accounting for enzyme inhibition and deactivation. Control is implemented using a discrete state-space model with a time step of 1 minute, taking into account transient processes. The system is implemented on a programmable logic controller platform with SCADA integration for data acquisition and visualization. Experimental validation demonstrated an increase in sugar yield up to 76-85%, a reduction in the coefficient of variation to 4%, a decrease in inhibitor concentration, reduced stabilization time and energy consumption, as well as robustness to disturbances and variations in feedstock composition.
- Open Access
- 29 July 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 2(22),p. 264-272
TECHNOLOGY OF PRODUCTION OF NATIONAL FERMENTED MILK PRODUCT
This scientific study, taking into account the biochemical and technological advantages of camel milk, developed a technology for producing national kurt with the addition of dried apricot (kuraga). The research analyzed the physicochemical properties of camel milk, its natural parameters suitable for fermentation, and its efficiency in the production of fermented milk products. The nutritional and functional properties of kuraga, including natural sugars, potassium, β-carotene, and pectins, were used to improve the quality characteristics of kurt. The study included determining the chemical composition, organoleptic characteristics, moisture content, acidity, and energy value of the final product. Samples with 3%, 5%, 7% kuraga were comparatively studied, and the 5% kuraga variant was found to be the most effective in terms of taste, structure, and vitamin content. The content of B vitamins in the selected sample showed the following results: B1 – 0.057±0.011, B2 – 0.208±0.085, B3 – 4.22±0.818, B5 – 0.330±0.064, B6 – 0.125±0.023. As a result, a scientifically justified technological scheme for producing kurt from camel milk with the addition of kuraga was proposed, which increases the nutritional value and functional properties of the product. This technology promotes the modernization of national products and expands their market demand.
- 29 July 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- No. 2(22),p. 264-272
Open AccessTECHNOLOGY OF PRODUCTION OF NATIONAL FERMENTED MILK PRODUCT
This scientific study, taking into account the biochemical and technological advantages of camel milk, developed a technology for producing national kurt with the addition of dried apricot (kuraga). The research analyzed the physicochemical properties of camel milk, its natural parameters suitable for fermentation, and its efficiency in the production of fermented milk products. The nutritional and functional properties of kuraga, including natural sugars, potassium, β-carotene, and pectins, were used to improve the quality characteristics of kurt. The study included determining the chemical composition, organoleptic characteristics, moisture content, acidity, and energy value of the final product. Samples with 3%, 5%, 7% kuraga were comparatively studied, and the 5% kuraga variant was found to be the most effective in terms of taste, structure, and vitamin content. The content of B vitamins in the selected sample showed the following results: B1 – 0.057±0.011, B2 – 0.208±0.085, B3 – 4.22±0.818, B5 – 0.330±0.064, B6 – 0.125±0.023. As a result, a scientifically justified technological scheme for producing kurt from camel milk with the addition of kuraga was proposed, which increases the nutritional value and functional properties of the product. This technology promotes the modernization of national products and expands their market demand.
- 30 June 2026
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 137-146
INFLUENCE OF MOLECULAR HYDROGEN ON THE YIELD OF BIOACTIVE COMPOUNDS FROM GRAPE POMACE
Берілген жұмыста жүзім қабығынан құнды қосылыстарды бөліп алу тиімділігі төрт түрлі еріткішті қолдану арқылы зерттелінді: бақылау үлгісі, сутекпен қанықтырылған, қышқылдандырылған, сондай-ақ қышқылдандырылған және сутекпен қанықтырылған. Үлгілерде жалпы полифенолдар (TPC), флавоноидтар (TFC), антоциандар (TMA) мөлшері және DPPH, ABTS және FRAP әдістерімен антиоксиданттық белсенділік анықталды. Сулы экстракттілердезерттелген еріткіштер арасында елеулі айырмашылықтар байқалмады. Этанолды жүйелерде қышқылдандыру мен сутекпен қанықтыру үйлесімі TPC және TMA көрсеткіштерінің, сондай-ақ DPPH және ABTS әдістері бойынша антиоксиданттық белсенділіктің айтарлықтай артуына әкелді. Бұл ретте FRAP көрсеткіштері іс жүзінде өзгеріссіз қалды, бұл молекулярлық сутектің әсерінің селективті сипатын көрсетеді: ол полифенолдар мен антоциандардың шығымын арттырады, бірақ FRAP әдісімен бағаланатын тотықсыздандырғыш қабілетіне әсер етпейді. Алынған нәтижелер жүзім қалдықтарынан құнды биологиялық белсенді қосылыстар шығымын бағытты түрде арттыру үшін сутекпен қанықтырылған қышқылдандырылған этанолды еріткіштерді қолданудың болашағы бар екенін растайды.
- 30 June 2026
- Published by Dulaty University in Mechanics and Technologies
- No. 2,p. 137-146
INFLUENCE OF MOLECULAR HYDROGEN ON THE YIELD OF BIOACTIVE COMPOUNDS FROM GRAPE POMACE
Берілген жұмыста жүзім қабығынан құнды қосылыстарды бөліп алу тиімділігі төрт түрлі еріткішті қолдану арқылы зерттелінді: бақылау үлгісі, сутекпен қанықтырылған, қышқылдандырылған, сондай-ақ қышқылдандырылған және сутекпен қанықтырылған. Үлгілерде жалпы полифенолдар (TPC), флавоноидтар (TFC), антоциандар (TMA) мөлшері және DPPH, ABTS және FRAP әдістерімен антиоксиданттық белсенділік анықталды. Сулы экстракттілердезерттелген еріткіштер арасында елеулі айырмашылықтар байқалмады. Этанолды жүйелерде қышқылдандыру мен сутекпен қанықтыру үйлесімі TPC және TMA көрсеткіштерінің, сондай-ақ DPPH және ABTS әдістері бойынша антиоксиданттық белсенділіктің айтарлықтай артуына әкелді. Бұл ретте FRAP көрсеткіштері іс жүзінде өзгеріссіз қалды, бұл молекулярлық сутектің әсерінің селективті сипатын көрсетеді: ол полифенолдар мен антоциандардың шығымын арттырады, бірақ FRAP әдісімен бағаланатын тотықсыздандырғыш қабілетіне әсер етпейді. Алынған нәтижелер жүзім қалдықтарынан құнды биологиялық белсенді қосылыстар шығымын бағытты түрде арттыру үшін сутекпен қанықтырылған қышқылдандырылған этанолды еріткіштерді қолданудың болашағы бар екенін растайды.
- Open Access
- 23 June 2026
- Published by Stowarzyszenie Menedzerow Jakosci i Produkcji in Production Engineering Archives
- Vol. 32 (3) , 395-406
Integrated Mathematical Modelling of the Husking-Separation-Pressing Technological Chain for Safflower Seed Processing
This study presents an integrated mathematical model of the technological processing chain for safflower seeds, comprising husking, pneumatic separation, and pressing operations. The model is based on energy and momentum balance equations and enables the engineering analysis of the interactions between consecutive unit operations within the technological chain. For the mechanical husking stage, the critical conditions of husk rupture while preserving kernel integrity were determined, allowing the identification of optimal operating regimes for raw material pretreatment. Modeling of pneumatic classification demonstrated the existence of a stable aerodynamic separation zone in which the air flow entrains husk particles while kernels remain in the separation channel. The calculated process parameters indicate that approximately 43% of the kernel and 25% of the husk can be recovered, resulting in a theoretical final kernel yield of about 73% when the efficiencies of husking and separation are considered. The pressing stage was analyzed using a momentum-based mechanical model describing the balance of forces acting in the pressing zone. The results show that the technologically efficient operating range of pressing lies between approximately 7 and 20 MPa. Within this range, about 66% of the theoretical oil content is released at the initial pressing stage, while increasing pressure towards the upper limit of the operating zone allows the oil yield to approach 95%, though at lower energy efficiency. The proposed modeling approach enables analysis of the safflower processing line as an integrated technological system. It provides a theoretical basis for the engineering design and optimization of industrial oilseed processing.
- 23 June 2026
- Published by Stowarzyszenie Menedzerow Jakosci i Produkcji in Production Engineering Archives
- Vol. 32 (3) , 395-406
Open AccessIntegrated Mathematical Modelling of the Husking-Separation-Pressing Technological Chain for Safflower Seed Processing
This study presents an integrated mathematical model of the technological processing chain for safflower seeds, comprising husking, pneumatic separation, and pressing operations. The model is based on energy and momentum balance equations and enables the engineering analysis of the interactions between consecutive unit operations within the technological chain. For the mechanical husking stage, the critical conditions of husk rupture while preserving kernel integrity were determined, allowing the identification of optimal operating regimes for raw material pretreatment. Modeling of pneumatic classification demonstrated the existence of a stable aerodynamic separation zone in which the air flow entrains husk particles while kernels remain in the separation channel. The calculated process parameters indicate that approximately 43% of the kernel and 25% of the husk can be recovered, resulting in a theoretical final kernel yield of about 73% when the efficiencies of husking and separation are considered. The pressing stage was analyzed using a momentum-based mechanical model describing the balance of forces acting in the pressing zone. The results show that the technologically efficient operating range of pressing lies between approximately 7 and 20 MPa. Within this range, about 66% of the theoretical oil content is released at the initial pressing stage, while increasing pressure towards the upper limit of the operating zone allows the oil yield to approach 95%, though at lower energy efficiency. The proposed modeling approach enables analysis of the safflower processing line as an integrated technological system. It provides a theoretical basis for the engineering design and optimization of industrial oilseed processing.
- Open Access
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 305-314
IMPROVING THE FORMULATION OF A BEVERAGE PRODUCT PREPARED FROM CURD WHEY
This article examines waste-free recycling of secondary raw materials in the dairy industry. Whey's high quality and safety, adequate caloric value, digestibility, optimal nutrient balance, and biological and physiological completeness characterize its nutritional value. Moreover, whey's energy value is lower than that of skim milk, while its biological value is approximately the same, indicating its potential for use in the production of dietary foods. Methods for producing a healthy beverage by adding plant-based ingredients to whey, a byproduct of cottage cheese production, and the conditions for introducing these ingredients into mass consumption are discussed. A new beverage has been developed using blackcurrants and black currants as plant-based ingredients. The study resulted in the development of a finished product fortified with plant-based ingredients for beverages based on whey, a secondary raw material remaining during cottage cheese production. Its physicochemical and organoleptic properties are evaluated. It was found that the dry matter content of the drink and the pH value varied depending on the type and concentration of herbal additives. It was revealed that herbal additives significantly contributed to the nutritional and biological value of whey-based drinks. The rich content of natural antioxidants, vitamins, organic acids and pectins in caline berries and black currants increased the biological activity of the finished product. The results of the study showed that the protein mass proportion in a drink with calla berries and black currants selected as optimal was 1,56%, the amount of dry matter – 5,3%, the lactose mass proportion – 4,7%, the pH value – 3,96, as well as the vitamin C quantity – 1,8%, and the amount of food fibers – 0,15%.
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 305-314
Open AccessIMPROVING THE FORMULATION OF A BEVERAGE PRODUCT PREPARED FROM CURD WHEY
This article examines waste-free recycling of secondary raw materials in the dairy industry. Whey's high quality and safety, adequate caloric value, digestibility, optimal nutrient balance, and biological and physiological completeness characterize its nutritional value. Moreover, whey's energy value is lower than that of skim milk, while its biological value is approximately the same, indicating its potential for use in the production of dietary foods. Methods for producing a healthy beverage by adding plant-based ingredients to whey, a byproduct of cottage cheese production, and the conditions for introducing these ingredients into mass consumption are discussed. A new beverage has been developed using blackcurrants and black currants as plant-based ingredients. The study resulted in the development of a finished product fortified with plant-based ingredients for beverages based on whey, a secondary raw material remaining during cottage cheese production. Its physicochemical and organoleptic properties are evaluated. It was found that the dry matter content of the drink and the pH value varied depending on the type and concentration of herbal additives. It was revealed that herbal additives significantly contributed to the nutritional and biological value of whey-based drinks. The rich content of natural antioxidants, vitamins, organic acids and pectins in caline berries and black currants increased the biological activity of the finished product. The results of the study showed that the protein mass proportion in a drink with calla berries and black currants selected as optimal was 1,56%, the amount of dry matter – 5,3%, the lactose mass proportion – 4,7%, the pH value – 3,96, as well as the vitamin C quantity – 1,8%, and the amount of food fibers – 0,15%.
- Open Access
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 486-496
A STUDY OF THE STRUCTURAL AND MECHANICAL PROPERTIES OF SAUSAGE PRODUCTS USING A BIOLOGICAL ADDITIVE
This article examines the relationship between structural and mechanical properties, such as water-binding capacity and pH, of sausages prepared with the addition of biologically active additives. Currently, to improve human nutrition and health, the rational use of natural products of plant and animal origin, as well as natural mineral sources, which have been used by humanity for decades, is becoming increasingly important. Products that meet healthy nutritional requirements primarily include products with various functional uses, including biologically active food additives. This study aims to ensure adequate human nutrition, as well as disease prevention, and improve human health and performance. The study substantiated the addition of 10% biological additive to cooked sausages. A new recipe was developed and a technology for cooking sausages with the addition of biological additives was proposed. Comprehensive studies of the composition of cooked sausages were conducted. It has been proven that a biological additive based on plant and animal raw materials positively influences the nutritional and biological properties of cooked sausages, while functional ingredients improve the quality of the finished product and enhance its shelf life. Studies were conducted to determine the physicochemical, structural, mechanical, and organoleptic properties of the finished product.
- 25 May 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (1(21)) , 486-496
Open AccessA STUDY OF THE STRUCTURAL AND MECHANICAL PROPERTIES OF SAUSAGE PRODUCTS USING A BIOLOGICAL ADDITIVE
This article examines the relationship between structural and mechanical properties, such as water-binding capacity and pH, of sausages prepared with the addition of biologically active additives. Currently, to improve human nutrition and health, the rational use of natural products of plant and animal origin, as well as natural mineral sources, which have been used by humanity for decades, is becoming increasingly important. Products that meet healthy nutritional requirements primarily include products with various functional uses, including biologically active food additives. This study aims to ensure adequate human nutrition, as well as disease prevention, and improve human health and performance. The study substantiated the addition of 10% biological additive to cooked sausages. A new recipe was developed and a technology for cooking sausages with the addition of biological additives was proposed. Comprehensive studies of the composition of cooked sausages were conducted. It has been proven that a biological additive based on plant and animal raw materials positively influences the nutritional and biological properties of cooked sausages, while functional ingredients improve the quality of the finished product and enhance its shelf life. Studies were conducted to determine the physicochemical, structural, mechanical, and organoleptic properties of the finished product.
- Open Access
- 7 May 2026
- Published by Elsevier in Applied Food Research
- Vol. 6 (1)
Supercritical hybrid carbon dioxide-hydrogen as a new sustainable extraction of phenolics and antioxidants from grape seeds
- 7 May 2026
- Published by Elsevier in Applied Food Research
- Vol. 6 (1)
Open AccessSupercritical hybrid carbon dioxide-hydrogen as a new sustainable extraction of phenolics and antioxidants from grape seeds
- Open Access
- 3 March 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 242
Supercritical hybrid carbon dioxide-hydrogen extraction for phenolics and antioxidants from mint using response surface methodology, modelling, and optimization
- 3 March 2026
- Published by Elsevier in Industrial Crops and Products
- Vol. 242
Open AccessSupercritical hybrid carbon dioxide-hydrogen extraction for phenolics and antioxidants from mint using response surface methodology, modelling, and optimization
- 25 January 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (4(20)) , 249-255
AUGER CALCULATION AND SCOPE OF APPLICATION
Currently, many types of centrifugal equipment are used in various industries. Among them:continuously operating filter screw centrifuges, pulsating, inertial, vibrationally discharged sludge and settling screw centrifuges. It is the most efficient equipment used in the food and meat industry and provides high-quality separation of liquid heterogeneous systems [1].Screw devices used in the food industry are divided into augers: conveying and pressing.The pressing screws are designed to create increased pressure in the product in order to change its physical properties, shape and ratio between the solid and liquid phases.The special feature of the pressing screws is high pressure: up to 6-20 MPa and low rotation speed: 5-30 rpm.Transporting screws are provided to move the product. They can additionally perform the functions of dosing and mixing.They have higher rotational speeds: from 50 to 400 rpm and should not create excessive pressure on the product, as well as not over–pump the transported material.As a working body, the auger has the following advantages: simplicity of design, versatility, compactness, and low cost.In research papers, geometric dimensions are considered generically and are taken based on the patterns of the average value. This cannot fully provide an accurate description of the ongoing process. These facts indicate that the separation of liquid heterogeneous systems in centrifugal equipment still requires a large amount of research.
- 25 January 2026
- Published by Shakarim University in Bulletin of Shakarim University. Technical Sciences
- Vol. 1 (4(20)) , 249-255
AUGER CALCULATION AND SCOPE OF APPLICATION
Currently, many types of centrifugal equipment are used in various industries. Among them:continuously operating filter screw centrifuges, pulsating, inertial, vibrationally discharged sludge and settling screw centrifuges. It is the most efficient equipment used in the food and meat industry and provides high-quality separation of liquid heterogeneous systems [1].Screw devices used in the food industry are divided into augers: conveying and pressing.The pressing screws are designed to create increased pressure in the product in order to change its physical properties, shape and ratio between the solid and liquid phases.The special feature of the pressing screws is high pressure: up to 6-20 MPa and low rotation speed: 5-30 rpm.Transporting screws are provided to move the product. They can additionally perform the functions of dosing and mixing.They have higher rotational speeds: from 50 to 400 rpm and should not create excessive pressure on the product, as well as not over–pump the transported material.As a working body, the auger has the following advantages: simplicity of design, versatility, compactness, and low cost.In research papers, geometric dimensions are considered generically and are taken based on the patterns of the average value. This cannot fully provide an accurate description of the ongoing process. These facts indicate that the separation of liquid heterogeneous systems in centrifugal equipment still requires a large amount of research.
- Open Access
- 18 January 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
A novel hydrogen-incorporated carbon dioxide supercritical system for extracting phytochemicals from grape peels: Response surface methodology–based modeling and optimization
- 18 January 2026
- Published by Elsevier in Results in Engineering
- Vol. 29
Open AccessA novel hydrogen-incorporated carbon dioxide supercritical system for extracting phytochemicals from grape peels: Response surface methodology–based modeling and optimization