NIN. K. Ibragimov

N. K. Ibragimov

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


N. K. Ibragimov has a total of 43 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    ИССЛЕДОВАНИЕ ПАРАМЕТРОВ РАБОТЫ СТЕНДА ДЛЯ АДСОРБЦИОННО-ФИЛЬТРАЦИОННОЙ ОЧИСТКИ ОТ ТОКСИЧНЫХ ВЕЩЕСТВ НА ОСНОВЕ ПРИРОДНЫХ СОРБЕНТОВ

    by А.к. Базанова, А.к. Какимов, Н.к. Ибрагимов, М.м. Ташыбаева

    В данной работе исследуется параметры функционирования экспериментальной установки адсорбционно-фильтрационной очистки жидких пищевых продуктов от токсичных веществ с использованием природных сорбентов (цеолита, шунгита и кокосового активированного угля). Установка представляет собой напорную систему с тремя сорбционными колоннами, которые могут включаться индивидуально или в различных комбинациях, что позволяет варьировать режимы фильтрации. В ходе эксперимента изучалось влияние объёма сорбентов (50, 100, 150 и 200 мл по шкале мерного стакана) и мощности насоса (135, 200 и 245 Вт), а также самотёчного режима на скорость процесса. Экспериментальные данные показали, что оптимальные результаты достигаются при мощности насоса 200 Вт с использованием цеолита (вторая колонна) и кокосового активированного угля (третья колонна), обеспечивающих наименьшее время фильтрации при сохранении высокой эффективности очистки. Наиболее эффективными сорбентами оказались цеолит и кокосовый активированный уголь, отличающиеся развитой пористой структурой и высокой удельной поверхностью. Самотёчный режим показал наименьшую эффективность. Полученные результаты подтверждают целесообразность применения природных сорбентов для повышения безопасности жидких пищевых продуктов и могут быть использованы при проектировании промышленных систем предварительной очистки.

  • Open Access

    ELECTRIC ARC SPRAYING WITH COPPER-PLATED WIRE SV08G2S ON GRADE 45 STEEL: FORMATION OF THE STRUCTURE AND PROPERTIES OF PROTECTIVE COATINGS

    by Zh.B. Sagdoldina, A.B. Leonidova, A.ZH. Zhassulan, A.B. Shynarbek, N.K. Ibragimov, Y.M. Mukhametov

    The paper investigates the influence of electric arc spraying process parameters using copper-plated Sv08G2S wire on the structure and performance characteristics of coatings formed on grade 45 steel. Spraying was performed at varying voltages and wire feed speeds, followed by a comprehensive analysis of the structure and properties of the resulting coatings. The best coating characteristics were achieved at 40 V, 280 A and a wire feed speed of 100 mm/s: the resulting coating exhibited a relatively dense and uniform structure, high microhardness (277.6 HV), minimal mass loss due to abrasive wear (0.018 g), and enhanced corrosion resistance. Electrochemical tests in a 3.5 wt.% NaCl solution revealed a positive shift of the corrosion potential to −0.318 V (vs. Ag/AgCl) and a low corrosion current density of 4.61 × 10⁻⁵ A/cm², corresponding to a corrosion rate of 0.54 mm/year. It is shown that voltage is one of the key parameters in supersonic arc metallization, governing arc stability, spray uniformity, and coating quality, whereas increasing the current and wire feed speed resulted in a thicker sprayed layer but promoted pore formation and reduced structural homogeneity. Overall, optimization of spraying parameters enables the formation of high-quality coatings with improved wear and corrosion resistance, thereby increasing the service life of steel components in practical applications.


  • APPLICATION OF NATURAL SORBENTS IN AN IMPROVED INSTALLATION FOR THE PURIFICATION OF MILK FROM TOXIC ELEMENTS

    by A. K. Bazanova, A. K. Kakimov, N. K. Ibragimov, M. M. Tashybayeva

    Milk is one of the most important and nutritious food products; however, its quality largely depends on environmental conditions. Environmental pollution leads to the accumulation of heavy metals in food products, posing a threat to public health. Among them, lead (Pb), cadmium (Cd), arsenic (As), and other elements are considered the most hazardous. The aim of this study was to determine the content of lead, cadmium, and arsenic in raw cow’s milk samples and to evaluate the efficiency of adsorption purification using natural sorbents. Samples collected from three settlements were analyzed by the method of inversion voltammetry. It was found that the cadmium content in milk from the village of Sarzhal exceeded the maximum permissible concentration (0.067 mg/kg at a standard of 0.03 mg/kg), whereas lead and arsenic levels remained within permissible limits. For milk purification, an improved experimental installation with three sorption columns filled with shungite, zeolite, and coconut-based activated carbon was used. The highest efficiency was achieved with the 1+3 column combination (shungite + coconut activated carbon), which reduced lead concentration by 91%, cadmium by 75%, and arsenic by 84%. The obtained results confirm the feasibility of using natural sorbents for milk purification and demonstrate the potential of the developed installation for application in laboratory and small-scale production conditions.

  • AUGER CALCULATION AND SCOPE OF APPLICATION

    by M. Shayakhmetova, B. Lobasenko, G. Abdilova, N. Ibragimov, A. Shengelbaev

    Currently, many types of centrifugal equipment are used in various industries. Among them:continuously operating filter screw centrifuges, pulsating, inertial, vibrationally discharged sludge and settling screw centrifuges. It is the most efficient equipment used in the food and meat industry and provides high-quality separation of liquid heterogeneous systems [1].Screw devices used in the food industry are divided into augers: conveying and pressing.The pressing screws are designed to create increased pressure in the product in order to change its physical properties, shape and ratio between the solid and liquid phases.The special feature of the pressing screws is high pressure: up to 6-20 MPa and low rotation speed: 5-30 rpm.Transporting screws are provided to move the product. They can additionally perform the functions of dosing and mixing.They have higher rotational speeds: from 50 to 400 rpm and should not create excessive pressure on the product, as well as not over–pump the transported material.As a working body, the auger has the following advantages: simplicity of design, versatility, compactness, and low cost.In research papers, geometric dimensions are considered generically and are taken based on the patterns of the average value. This cannot fully provide an accurate description of the ongoing process. These facts indicate that the separation of liquid heterogeneous systems in centrifugal equipment still requires a large amount of research.

  • Open Access

    IMPROVEMENT OF AN ADSORPTION UNIT FOR REDUCING TOXIC SUBSTANCES IN MILK: A COMPARATIVE ANALYSIS

    by A. K. Bazanova, A. K. Kakimov, N. K. Ibragimov, A. Mayorov

    This article presents an improved adsorption-based unit designed to reduce the content of radionuclides and heavy metal salts in milk. The objective of the study is to develop an effective purification technology that ensures the safe consumption of milk. Milk is a valuable food product with high biological and nutritional value. It contains proteins, fats, vitamins, and microelements essential for the human body and constitutes an important part of the daily diet. However, under conditions of environmental instability and technogenic pollution, dairy products may accumulate toxic substances such as radionuclides and heavy metal salts, which pose a threat to human health. Therefore, the development of effective methods for removing harmful contaminants from milk remains a relevant challenge.The study proposes an improvement of an experimental adsorption-based unit aimed at reducing the concentration of toxic substances in milk. The unit design enables the adjustment of liquid flow schemes in various combinations (through one, two, or three columns), allowing the purification process to be tailored according to the degree of contamination and the nature of toxic components. The adsorption method ensures the removal of harmful substances without degrading valuable nutritional components such as proteins, vitamins, and microelements. The unit does not require complex automation and is suitable for use under laboratory conditions. The application of affordable and low-cost natural sorbents contributes to lowering the overall purification cost.

  • Open Access

    Improvement of the system for reducing the content of toxic substances in milk

    by A. K. Bazanova, A. K. Kakimov, B. A. Lobasenko, N. K. Ibragimov, M. M. Tashybayeva

    This article discusses the reduction of radionuclide and heavy metal salt content in milk through the improvement of a system based on the adsorption method. Milk is a valuable food product with high biological and nutritional value. It contains proteins, fats, vitamins, and trace elements necessary for the human body, making it an important part of the daily diet. However, under conditions of environmental instability and anthropogenic pollution, dairy products may contain toxic substances, including radionuclides and heavy metal salts, which pose a threat to human health. An important task is the development of effective methods for purifying milk from harmful contaminants. This work presents the improvement of an experimental setup based on the adsorption method, designed to reduce the content of toxic substances in milk. Research was conducted to select optimal parameters and natural adsorbents under adsorption conditions. The improvement of the system for purifying liquid food products made it possible to vary the liquid flow scheme (through one, two, or three columns in different combinations), which allows controlling the purification process, contamination level, and type of toxic substances. The adsorption method ensures the removal of toxic substances without damaging valuable food components such as proteins, vitamins, and trace elements. The system does not require complex automation and is easy to maintain, making it suitable for laboratory use. The use of available and inexpensive natural adsorbents reduces the cost of the purification process.

  • Open Access

    DEVELOPMENT OF A SYSTEM FOR MEASURING THE TEMPERATURE OF A DRYING UNIT FOR MONITORING THE DRYING PROCESS OF KURT

    by E. Agzam, R. Kussainov, А. К. Какимов, A. Yerengaliyev, Н. К. Ибрагимов, Е. М. Ағзам

    The aim of the work is to develop a temperature measurement system using DS18B20 and prepare for further study of the drying process of kurt, checking the operability of the connection to the Arduino Nano controller. Nine sensors of this system will allow in the future to conduct an experiment and collect information about the temperature inside the kurt in real time during the drying process, which will confirm the reliability of the sensor unit and the drying unit for kurt as a whole. Installation of the sensor and controller was successful, which confirms the first results of idle measurement and monitoring of all temperature sensors using the Terminal 1,9b program. The temperature range of the sensors is calculated from -55°C to + 125°C, which makes it suitable for operation in a wide range of industrial conditions. The results of the study have practical value for subsequent experiments on drying kurt and other food products, as well as for monitoring the process of food products in real time. This installation method can be applied to other food equipment. They can contribute to the optimization of the drying process by monitoring the drying process, which is an important factor for the efficiency of control and improving the quality of the product.


  • Open Access

    APPLICATION OF A KURTA DRYING UNIT FOR DRYING FRUITS, GREENS AND VEGETABLES

    by E. Agzam, R. Kussainov, А. К. Какимов, A. Yerengaliyev, Н. К. Ибрагимов, Е. М. Ағзам

    The article discusses the application of the developed convective drying unit, designed for the production of kurt, for drying other food products, such as greens, vegetables and fruits. Kurt is a traditional Kazakh fermented milk product that requires special conditions for drying, which creates problems of seasonality in its production. The presented drying unit allows to solve this problem effectively, providing yearround production of chicken. During the experiments, the use of the unit for drying such products as parsley, dill, apples and sweet peppers was tested in order to evaluate its versatility. The results showed that the unit ensures fast and uniform drying, while preserving a significant amount of nutrients and vitamins. Weight loss after drying varied from 23% (parsley) to 60% (apples), which depends on the water content in the product. The device demonstrated high efficiency and reliability, and also opens up new opportunities for expanding the range of products in small and medium enterprises. The use of this unit can contribute to the development of the dried food and vegetable industry in the country, which has a number of advantages, such as simplified transportation and storage. Further research will be aimed at optimizing drying processes for various types of products, improving their quality, and assessing the cost-effectiveness of using drying equipment in small and medium businesses.

  • Open Access

    CALCULATION OF THE STRENGTH AUGER

    by M. Shayakhmetova, A. Kassenov, Б. А. Лобасенко, Г. Б. Абдилова, Н. К. Ибрагимов, М. К. Шаяхметова

    At present, many types of centrifugal equipment are used in various industries. Among them are: continuously working filter screw centrifuges, pulsating, inertial, vibrating sludge unloading and deposition screw centrifuges. This is the most efficient equipment used in the food and meat industries and providing high-quality separation of liquid heterogeneous systems. At present, scientific research is carried out only on centrifugal equipment with continuous wider operation. At the same time, it studies the technological and dynamic aspects of the centrifugation process. This research work is considered insufficient.This is especially true for the meat industry, where the processes of cetrifugation of liquid systems are not well understood. This is because meat products are a complex colloidal-dispersed system consisting of dense moisture and dry residues with great adsorption capacity. The qualitative and quantitative characteristics of centrifugation have not been fully studied. Along with the design features of the equipment, sufficient attention was not paid to the technological features of production. In research papers, geometric measurements are considered in a generalized form and are obtained on the basis of average patterns. This cannot provide a detailed description of the current process. These facts indicate that the process of separating liquid heterogeneous systems in Centrifugal equipment still requires a lot of research.


  • Open Access

    APPLICATION OF THE LAGRANGE MULTIPLIER METHOD IN ORDER TO OPTIMIZE THE CENTRIFUGATION PROCESS

    by M. Shayakhmetova, A. Kassenov, Б. А. Лобасенко, Г. Б. Абдилова, Н. К. Ибрагимов, М. К. Шаяхметова

    For the EAEU countries and, in particular, for the Republic of Kazakhstan, the use of wastefree processing of raw materials is extremely relevant. Such industries include medium and small meat processing plants. In the waste-free technology of meat products, the production of dry feed has a high nutritional value compared to other feed products. In the production of dry feed at large enterprises, continuously operating high-performance equipment is widely used to separate liquid heterogeneous systems.However, for small and medium-sized enterprises, the development course of which is carried out in the republic, the same continuously operating equipment of low productivity is necessary. In this regard, the development of such equipment is a very urgent task. At the same time, numerous previous studies were mainly aimed at studying the technological and dynamic side of the centrifugation process of high-performance machines used in related industries, in particular, chemical, whereas such studies were not carried out for small and medium-sized machines. This is especially true for the meat industry, where the processes of cetrifugation of liquid systems are insufficiently studied. This is due to the fact that meat products are a complex colloidal-dispersed system consisting of tightly adjacent moisture and dry residue, which has a high adsorption capacity. The qualitative and quantitative characteristics of centrifugation have not been fully studied. Insufficient attention was paid to the technological features of production along with the design features of the equipment. In this regard, the production of dry feed is in demand, since the latter have a high nutritional value superior to other feed products. In the production of dry animal feed, the centrifugation process is used to separate fat from flakes. The use of the centrifugation process in the separation of fat from the flakes ensures high quality of the resulting fat. Moreover, this quality is much higher than that of fat obtained in the processes of pressing and extraction of raw materials.As a result, significant energy savings in small and medium-sized production with scaling to the entire meat processing industry contribute to improving the overall environmental situation. In this regard, the importance of further development of «green» energy is increasing.