Neha Nain
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Neha Nain has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
- Johann Walter Kolar
Power Electronic Systems Laboratory (PES), ETH Zrich, Zrich, Switzerland
7 shared publications - Jonas Huber
Power Electronic Systems Laboratory (PES), ETH Zrich, Zrich, Switzerland
4 shared publications - Jon Azurza Anderson
Power Electronic Systems Laboratory, ETH Zurich, Zurich, Zurich Switzerland 8092
3 shared publications - Michael Haider
D-ITET/PES, ETH Zurich, Zurich, Switzerland, 8092
3 shared publications - Daifei Zhang
Power Electronic Systems Laboratory, ETH Zrich, Zrich, Switzerland
2 shared publications - Dehong Xu
Zhejiang University
2 shared publications
Latest Publications
- 25 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (6) , 7615-7639
Experimental Comparison of Three-Phase AC–AC Monolithic Bidirectional GaN Transistor-Based Current DC-Link Converter and GaN Transistor-Based Voltage DC-Link Converter
Grid-connected variable speed drives (VSDs) are ac-ac converters that ideally provide smooth sinusoidal output voltages for compatibility with standard motors, avoiding over-voltage and/or EMI issues if long motor cables are used. Such ac-ac VSDs are either realized as a voltage-source converter (VSC) with an output filter or as a current-source converter (CSC) which inherently provides smooth motor voltages. CSCs require switching devices with bipolar voltage blocking capability, leading to a significant disadvantage regarding chip area usage compared to VSCs. The recent availability of 600V GaN monolithic bidirectional power transistors (M-BDSs) removes this disadvantage and therefore motivates an in-depth comparison of a VSC and a CSC with identical system specifications (1.4 kW, 200V line-to-line-rms, 97% nominal efficiency, conducted EMI limits on grid and motor side) and roughly equal chip area usage as the CSC employs first-generation 140mΩ GaN M-BDSs. The presented 600V-GaN-based ac-ac VSC and the CSC demonstrators achieve similar power densities of 1.7 kW/dm3 and 1.8 kW/dm3, respectively, and almost equal nominal efficiencies of 97%. The CSC shows generally higher part-load efficiency, which reflects in weighted efficiencies of 95.7% for the VSC and 96.6% for the CSC considering the NEMA Power Index mission profile for variable-speed centrifugal systems like pumps, fans, or compressors. EMI pre-compliance tests confirm that both demonstrators meet the same conducted EMI limits, and radiated EMI pre-compliance testing of the CSC indicates the effectiveness of the motor-side EMI filter even with inexpensive unshielded motor cables.
- 25 August 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Journal of Emerging and Selected Topics in Power Electronics
- Vol. 13 (6) , 7615-7639
Experimental Comparison of Three-Phase AC–AC Monolithic Bidirectional GaN Transistor-Based Current DC-Link Converter and GaN Transistor-Based Voltage DC-Link Converter
Grid-connected variable speed drives (VSDs) are ac-ac converters that ideally provide smooth sinusoidal output voltages for compatibility with standard motors, avoiding over-voltage and/or EMI issues if long motor cables are used. Such ac-ac VSDs are either realized as a voltage-source converter (VSC) with an output filter or as a current-source converter (CSC) which inherently provides smooth motor voltages. CSCs require switching devices with bipolar voltage blocking capability, leading to a significant disadvantage regarding chip area usage compared to VSCs. The recent availability of 600V GaN monolithic bidirectional power transistors (M-BDSs) removes this disadvantage and therefore motivates an in-depth comparison of a VSC and a CSC with identical system specifications (1.4 kW, 200V line-to-line-rms, 97% nominal efficiency, conducted EMI limits on grid and motor side) and roughly equal chip area usage as the CSC employs first-generation 140mΩ GaN M-BDSs. The presented 600V-GaN-based ac-ac VSC and the CSC demonstrators achieve similar power densities of 1.7 kW/dm3 and 1.8 kW/dm3, respectively, and almost equal nominal efficiencies of 97%. The CSC shows generally higher part-load efficiency, which reflects in weighted efficiencies of 95.7% for the VSC and 96.6% for the CSC considering the NEMA Power Index mission profile for variable-speed centrifugal systems like pumps, fans, or compressors. EMI pre-compliance tests confirm that both demonstrators meet the same conducted EMI limits, and radiated EMI pre-compliance testing of the CSC indicates the effectiveness of the motor-side EMI filter even with inexpensive unshielded motor cables.
- 6 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (7) , 9167-9186
Synergetic Control of a Monolithic-Bidirectional-GaN-Transistor-Based Three-Phase Current DC-Link AC–AC Converter
Variable speed drives (VSDs) operating from a threephase mains are typically realized as ac–ac voltage dc-link/source converters (VSCs). Compact VSCs using wide-bandgap (WBG) semiconductors often require LC output filters to protect the motor from high dv/dt of the switched voltage. Ac-ac current dc-link/source converters (CSCs) featuring a back-to-back connection of a current-source rectifier (CSR) and current-source inverter (CSI) by a shared dc-link inductor inherently provide continuous motor voltages. This paper introduces the loss-optimal operating mode of ac–ac CSCs: using the minimum possible and hence time-varying dc-link current (the maximum absolute value of the CSR and CSI phase currents) minimizes the conduction losses and either the CSR or the CSI operates with 2/3-PWM (one phase terminal clamped to the dc-link inductor while only the remaining two phase currents are synthesized with PWM), reducing switching losses. The respective other stage employs PWM in all three phases (3/3-PWM) and shapes the dc-link current. A proposed synergetic control method realizes loss-optimal operation for the entire output voltage and current range of the ac-ac CSC, with motor voltages lower and higher than the grid voltage, and ensures smooth transitions between operating points. Experimental results of a 1.4 kW, 200 V (line-to-line rms) ac–ac CSC demonstrator using first-generation 600 V, 140${\mathrm{m}}\mathrm{\Omega }$ monolithic bidirectional GaN transistors, grid-side and motor-side EMI filters, and a switching frequency of 72 kHz confirm the loss optimal operation (measured nominal ac-ac efficiency increases by 0.3% to 97% compared to conventional operation; part-load efficiency gains of up to 1% are observed) and seamless transitions between operating points.
- 6 March 2025
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 40 (7) , 9167-9186
Synergetic Control of a Monolithic-Bidirectional-GaN-Transistor-Based Three-Phase Current DC-Link AC–AC Converter
Variable speed drives (VSDs) operating from a threephase mains are typically realized as ac–ac voltage dc-link/source converters (VSCs). Compact VSCs using wide-bandgap (WBG) semiconductors often require LC output filters to protect the motor from high dv/dt of the switched voltage. Ac-ac current dc-link/source converters (CSCs) featuring a back-to-back connection of a current-source rectifier (CSR) and current-source inverter (CSI) by a shared dc-link inductor inherently provide continuous motor voltages. This paper introduces the loss-optimal operating mode of ac–ac CSCs: using the minimum possible and hence time-varying dc-link current (the maximum absolute value of the CSR and CSI phase currents) minimizes the conduction losses and either the CSR or the CSI operates with 2/3-PWM (one phase terminal clamped to the dc-link inductor while only the remaining two phase currents are synthesized with PWM), reducing switching losses. The respective other stage employs PWM in all three phases (3/3-PWM) and shapes the dc-link current. A proposed synergetic control method realizes loss-optimal operation for the entire output voltage and current range of the ac-ac CSC, with motor voltages lower and higher than the grid voltage, and ensures smooth transitions between operating points. Experimental results of a 1.4 kW, 200 V (line-to-line rms) ac–ac CSC demonstrator using first-generation 600 V, 140${\mathrm{m}}\mathrm{\Omega }$ monolithic bidirectional GaN transistors, grid-side and motor-side EMI filters, and a switching frequency of 72 kHz confirm the loss optimal operation (measured nominal ac-ac efficiency increases by 0.3% to 97% compared to conventional operation; part-load efficiency gains of up to 1% are observed) and seamless transitions between operating points.
- 30 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (9) , 10091-10094
Self-Reverse-Blocking Control of Dual-Gate Monolithic Bidirectional GaN Switch With Quasi-Ohmic on-State Characteristic
Converter topologies such as current-source rectifiers and inverters require switching devices with bipolar voltage blocking and unidirectional current conduction capability. Recently available dual-gate GaN monolithic bidirectional switches (MBDSs) can mimic such self-reverse-blocking (SRB) behavior if the MBDS’ two gates are controlled accordingly, but thus need twice the number of gate signals and gate drive circuits. Therefore, we propose cascode-diode control (i.e., without additional sensing or gate drive circuitry) of one MBDS gate using a cascode configuration with a low-voltage silicon Schottky diode. The resulting SRB-MBDS features quasi-ohmic conduction characteristic and single-gate control. We provide static and dynamic measurements of a discrete proof-of-concept realization (600-V, 190-m$\mathrm{\Omega }$ GaN MBDS; 40-V, 10-A silicon Schottky diode) that demonstrate the proposed SRB-MBDS’ feasibility.- 30 March 2022
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 37 (9) , 10091-10094
Self-Reverse-Blocking Control of Dual-Gate Monolithic Bidirectional GaN Switch With Quasi-Ohmic on-State Characteristic
Converter topologies such as current-source rectifiers and inverters require switching devices with bipolar voltage blocking and unidirectional current conduction capability. Recently available dual-gate GaN monolithic bidirectional switches (MBDSs) can mimic such self-reverse-blocking (SRB) behavior if the MBDS’ two gates are controlled accordingly, but thus need twice the number of gate signals and gate drive circuits. Therefore, we propose cascode-diode control (i.e., without additional sensing or gate drive circuitry) of one MBDS gate using a cascode configuration with a low-voltage silicon Schottky diode. The resulting SRB-MBDS features quasi-ohmic conduction characteristic and single-gate control. We provide static and dynamic measurements of a discrete proof-of-concept realization (600-V, 190-m$\mathrm{\Omega }$ GaN MBDS; 40-V, 10-A silicon Schottky diode) that demonstrate the proposed SRB-MBDS’ feasibility.- 2 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Synergetic Control of Three-Phase AC-AC Current-Source Converter Employing Monolithic Bidirectional 600 V GaN Transistors
AC-AC current-source converters (CSCs) are an interesting alternative to the widely-used voltage-source converters for next-generation motor drive applications, as they inherently feature continuous output voltages and minimum filter effort. This mitigates issues such as reflections on long motor cables, high-frequency motor losses, the need for expensive shielded motor cables, and common-mode currents that damage motor bearings. In this paper, we first propose a new synergetic control for an AC-AC CSC that always operates either the front-end rectifier or the output-side inverter stage with one phase clamped, reducing switching losses compared to conventional modulation that continuously operates all three phases. We then provide calorimetric switching loss measurements of a novel 600 V, 140 mW monolithic bidirectional GaN transistor, and model the impact of the third, passive switch present in CSC commutation cells on switching losses. This facilitates a subsequent quantitative performance evaluation of an exemplary AC-AC CSC motor drive that employs the GaN M-BDS and operates from a 200 V three-phase mains. For a nominal motor power of 1.5 kW and a required AC-AC semiconductor efficiency of 98 %, a conventionally controlled CSC can operate with a switching frequency of 48 kHz, whereas the proposed synergetic control enables twice the switching frequency, i.e., 96 kHz and accordingly facilitates a significant volume reduction of the DC-link inductor and the input and output side filter capacitors.
- 2 November 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1-8
Synergetic Control of Three-Phase AC-AC Current-Source Converter Employing Monolithic Bidirectional 600 V GaN Transistors
AC-AC current-source converters (CSCs) are an interesting alternative to the widely-used voltage-source converters for next-generation motor drive applications, as they inherently feature continuous output voltages and minimum filter effort. This mitigates issues such as reflections on long motor cables, high-frequency motor losses, the need for expensive shielded motor cables, and common-mode currents that damage motor bearings. In this paper, we first propose a new synergetic control for an AC-AC CSC that always operates either the front-end rectifier or the output-side inverter stage with one phase clamped, reducing switching losses compared to conventional modulation that continuously operates all three phases. We then provide calorimetric switching loss measurements of a novel 600 V, 140 mW monolithic bidirectional GaN transistor, and model the impact of the third, passive switch present in CSC commutation cells on switching losses. This facilitates a subsequent quantitative performance evaluation of an exemplary AC-AC CSC motor drive that employs the GaN M-BDS and operates from a 200 V three-phase mains. For a nominal motor power of 1.5 kW and a required AC-AC semiconductor efficiency of 98 %, a conventionally controlled CSC can operate with a switching frequency of 48 kHz, whereas the proposed synergetic control enables twice the switching frequency, i.e., 96 kHz and accordingly facilitates a significant volume reduction of the DC-link inductor and the input and output side filter capacitors.
- Open Access
- 9 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 2, 250-264
Analytical Calculation of the Residual ZVS Losses of TCM-Operated Single-Phase PFC Rectifiers
Triangular-current-mode (TCM) modulation guarantees zero-voltage-switching across the mains cycle in AC-DC power converters, eliminating hard-switching with a minor 30% penalty in conduction losses over the conventional continuous current mode (CCM) modulation scheme. TCM-operated converters, however, include a wide variation in both switching frequency and switched current across the mains cycle, complicating an analytical description of the key operating parameters to date. In this work, we derive an analytical description for the semiconductor bridge-leg losses in a TCM AC-DC converter, including the rms current and/or conduction losses, switching frequency, and switching losses. For SiC MOSFETs, we introduce a new loss model for switching losses under zero-voltage-switching, which we call “residual ZVS losses”. These losses include the constant Coss losses found in previous literature but must also add, we find, turn-off losses that occur at high switched currents. The existence and modeling of these turn-off losses are validated on the IMZA65R027M1H 650V SiC MOSFET. The complete loss model is validated on a 2.2kW hardware bridge-leg demonstrator, which achieves a peak 99.6% semiconductor efficiency at full load. The proposed, fully-analytical model predicts bridge-leg losses with only 12% deviation, accurately including residual ZVS losses across load, modulation index, and external gate resistance.
- 9 February 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 2, 250-264
Open AccessAnalytical Calculation of the Residual ZVS Losses of TCM-Operated Single-Phase PFC Rectifiers
Triangular-current-mode (TCM) modulation guarantees zero-voltage-switching across the mains cycle in AC-DC power converters, eliminating hard-switching with a minor 30% penalty in conduction losses over the conventional continuous current mode (CCM) modulation scheme. TCM-operated converters, however, include a wide variation in both switching frequency and switched current across the mains cycle, complicating an analytical description of the key operating parameters to date. In this work, we derive an analytical description for the semiconductor bridge-leg losses in a TCM AC-DC converter, including the rms current and/or conduction losses, switching frequency, and switching losses. For SiC MOSFETs, we introduce a new loss model for switching losses under zero-voltage-switching, which we call “residual ZVS losses”. These losses include the constant Coss losses found in previous literature but must also add, we find, turn-off losses that occur at high switched currents. The existence and modeling of these turn-off losses are validated on the IMZA65R027M1H 650V SiC MOSFET. The complete loss model is validated on a 2.2kW hardware bridge-leg demonstrator, which achieves a peak 99.6% semiconductor efficiency at full load. The proposed, fully-analytical model predicts bridge-leg losses with only 12% deviation, accurately including residual ZVS losses across load, modulation index, and external gate resistance.
- Open Access
- 21 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (8) , 9398-9410
Accuracy of Three Interterminal Capacitance Models for SiC Power MOSFETs Under Fast Switching
This paper presents a comprehensive analysis of non-linear voltage-dependent capacitances of vertical SiC power MOSFETs with lateral channel, focusing specifically on fast switching transients. The capacitance-voltage (C-V) device characteristics, (Cgs, Cgd, Cds), being dependent on both Vgs and Vds, are extracted by means of two-dimensional Technology Computer Aided Design simulations for a commercially available device in both off- and on-state modes. Different compact models for the modelled power MOSFET are investigated, each employing a three inter-terminal capacitance model as typically used in power electronics. The performed analysis shows in detail the importance of taking into account the Cgd, Cgs and Cds voltage dependence on Vgs and Vds for fast switching transients (in the range of 10 ns) in order to accurately predict switching losses, driver losses, current and voltage slopes, as well as current and voltage delays. As direct measurements for C-Vs in dependence of both Vgs and Vds are highly demanding, the results presented in this paper increase the understanding of both the underlying effects as well as of the trade-offs between accuracy and computational complexity made by simplifying device models. This information is highly beneficial for enabling accurate and computationally efficient automated design procedures for power electronics.
- 21 January 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Power Electronics
- Vol. 36 (8) , 9398-9410
Open AccessAccuracy of Three Interterminal Capacitance Models for SiC Power MOSFETs Under Fast Switching
This paper presents a comprehensive analysis of non-linear voltage-dependent capacitances of vertical SiC power MOSFETs with lateral channel, focusing specifically on fast switching transients. The capacitance-voltage (C-V) device characteristics, (Cgs, Cgd, Cds), being dependent on both Vgs and Vds, are extracted by means of two-dimensional Technology Computer Aided Design simulations for a commercially available device in both off- and on-state modes. Different compact models for the modelled power MOSFET are investigated, each employing a three inter-terminal capacitance model as typically used in power electronics. The performed analysis shows in detail the importance of taking into account the Cgd, Cgs and Cds voltage dependence on Vgs and Vds for fast switching transients (in the range of 10 ns) in order to accurately predict switching losses, driver losses, current and voltage slopes, as well as current and voltage delays. As direct measurements for C-Vs in dependence of both Vgs and Vds are highly demanding, the results presented in this paper increase the understanding of both the underlying effects as well as of the trade-offs between accuracy and computational complexity made by simplifying device models. This information is highly beneficial for enabling accurate and computationally efficient automated design procedures for power electronics.
- 12 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 27.7.1-27.7.4
Application of WBG Power Devices in Future 3-Φ Variable Speed Drive Inverter Systems "How to Handle a Double-Edged Sword"
Latest research results on three-phase wide-bandgap (WBG) inverter systems with full-sinewave output voltage filtering are reported. A new soft-switching modulation scheme for two-level 1200 V SiC inverters is described. Furthermore, a new Figure-of-Merit for determining maximum multi-level (ML) bridge-leg efficiency is defined and low-voltage GaN devices are evaluated considering ML flying capacitor (FC) and multi-cell inverter structures. Finally, new integrated-filter buck-boost current DC-link inverter topologies are discussed.
- 12 December 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 27.7.1-27.7.4
Application of WBG Power Devices in Future 3-Φ Variable Speed Drive Inverter Systems "How to Handle a Double-Edged Sword"
Latest research results on three-phase wide-bandgap (WBG) inverter systems with full-sinewave output voltage filtering are reported. A new soft-switching modulation scheme for two-level 1200 V SiC inverters is described. Furthermore, a new Figure-of-Merit for determining maximum multi-level (ML) bridge-leg efficiency is defined and low-voltage GaN devices are evaluated considering ML flying capacitor (FC) and multi-cell inverter structures. Finally, new integrated-filter buck-boost current DC-link inverter topologies are discussed.
- Open Access
- 24 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 1, 529-543
Novel ZVS S-TCM Modulation of Three-Phase AC/DC Converters
For three-phase AC-DC power conversion, the widely-used continuous current mode (CCM) modulation scheme results in relatively high semiconductor losses from hard-switching each device during half of the mains cycle. Triangular current mode (TCM) modulation, where the inductor current reverses polarity before turn-off, achieves zero-voltage-switching (ZVS) but at the expense of a wide switching frequency variation (15x for the three-phase design considered here), complicating filter design and compliance with EMI regulations. We propose a new modulation scheme, sinusoidal triangular current mode (S-TCM), that achieves soft-switching, keeps the maximum switching frequency below the 150kHz EMI regulatory band, and limits the switching frequency variation to only 3x. Under S-TCM, three specific modulation schemes are analyzed, and a loss-optimized weighting of the current bands across load is identified. The 2.2kW S-TCM phase-leg hardware demonstrator achieves 99.7% semiconductor efficiency, with the semiconductor losses accurately analytically estimated within 10 % (0.3W). Relative to a CCM design, the required filter inductance is 6x lower, the inductor volume is 67% smaller, and the semiconductor losses are 2x smaller for a simultaneous improvement in power density and efficiency.
- 24 November 2020
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Open Journal of Power Electronics
- Vol. 1, 529-543
Open AccessNovel ZVS S-TCM Modulation of Three-Phase AC/DC Converters
For three-phase AC-DC power conversion, the widely-used continuous current mode (CCM) modulation scheme results in relatively high semiconductor losses from hard-switching each device during half of the mains cycle. Triangular current mode (TCM) modulation, where the inductor current reverses polarity before turn-off, achieves zero-voltage-switching (ZVS) but at the expense of a wide switching frequency variation (15x for the three-phase design considered here), complicating filter design and compliance with EMI regulations. We propose a new modulation scheme, sinusoidal triangular current mode (S-TCM), that achieves soft-switching, keeps the maximum switching frequency below the 150kHz EMI regulatory band, and limits the switching frequency variation to only 3x. Under S-TCM, three specific modulation schemes are analyzed, and a loss-optimized weighting of the current bands across load is identified. The 2.2kW S-TCM phase-leg hardware demonstrator achieves 99.7% semiconductor efficiency, with the semiconductor losses accurately analytically estimated within 10 % (0.3W). Relative to a CCM design, the required filter inductance is 6x lower, the inductor volume is 67% smaller, and the semiconductor losses are 2x smaller for a simultaneous improvement in power density and efficiency.