Yang Gao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Yang Gao has a total of 50 co-authors. Here are the top co-authors by number of shared publications:
- Lin Liu
Department of Mechanical Engineering, University of Kansas, 3138 Learned Hall, 1530 W. 15th Street, Lawrence, KS 66045-4709, USA
9 shared publications - Yuan Liang
Ningxia Engineering Research Center for Hybrid Manufacturing System, Yinchuan 750021, China
8 shared publications - Fuwei Wang
Institute of CIMS, Hefei University of Technology, Hefei 230009, China
4 shared publications - Ruimin Wang
Mechanical Engineering Department, University of Kansas, Lawrence, KS 66045, USA
4 shared publications - Yu Miao
School of Electrical and Information Engineering, North Minzu University, Yinchuan 750021, China
4 shared publications - Bin Yang
School of Mechanical Engineering, Hefei University of Technology, Hefei 230002, China
3 shared publications
Latest Publications
- Open Access
Dynamic Modeling and Cable Tension Optimization of a Redundantly Constrained Cable-Driven Parallel Robot
To address the problems of cable slackness and non-smooth cable-tension variation curves during the motion of an antagonistic cable-driven parallel robot (CDPR), this paper focuses on a three-degree-of-freedom (DOF) redundantly constrained CDPR. First, an inverse kinematics model of the robot is established using the vector closed-loop principle. Second, a dynamics model of the robot is established using the Newton–Euler method. Linear programming, quadratic programming, and nonlinear programming are respectively adopted to optimize the cable tensions. Through numerical simulation and comparative analysis, the nonlinear programming method, which produces the smallest cable tension fluctuations and the smoothest cable tension variation curves, is selected as the optimal approach among the three tested methods. Finally, numerical simulations and experiments verify the correctness of the inverse kinematic and dynamic models of the robot, as well as the effectiveness of the proposed cable tension optimization method. The results provide a theoretical reference for dynamic modeling and cable tension optimization of similar redundantly constrained CDPRs.
Open AccessDynamic Modeling and Cable Tension Optimization of a Redundantly Constrained Cable-Driven Parallel Robot
To address the problems of cable slackness and non-smooth cable-tension variation curves during the motion of an antagonistic cable-driven parallel robot (CDPR), this paper focuses on a three-degree-of-freedom (DOF) redundantly constrained CDPR. First, an inverse kinematics model of the robot is established using the vector closed-loop principle. Second, a dynamics model of the robot is established using the Newton–Euler method. Linear programming, quadratic programming, and nonlinear programming are respectively adopted to optimize the cable tensions. Through numerical simulation and comparative analysis, the nonlinear programming method, which produces the smallest cable tension fluctuations and the smoothest cable tension variation curves, is selected as the optimal approach among the three tested methods. Finally, numerical simulations and experiments verify the correctness of the inverse kinematic and dynamic models of the robot, as well as the effectiveness of the proposed cable tension optimization method. The results provide a theoretical reference for dynamic modeling and cable tension optimization of similar redundantly constrained CDPRs.
- 27 October 2026
- Published by Elsevier in Measurement
- Vol. 292
Multi-scale temporal fusion state-space modeling for remaining useful life prediction of lithium-ion batteries
- 27 October 2026
- Published by Elsevier in Measurement
- Vol. 292
Multi-scale temporal fusion state-space modeling for remaining useful life prediction of lithium-ion batteries
- Open Access
- 31 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (3) , 1462
Research Progress on Energy Consumption Throughout the Life Cycle of Machine Tools
Machine tools are the major consumers of industrial energy, but their energy efficiency remains low, posing a serious challenge to sustainable manufacturing. The current literature predominantly focuses on isolated subsystems or specific operational phases (e.g., cutting parameters), lacking systematic evaluations of how different methodologies interact within the Life Cycle Assessment (LCA) framework. This paper provides a critical synthesis of three core methodologies—modeling methods, system parameter optimization, and machine learning (ML)—across the design/production, usage, and recycling stages. Unlike descriptive reviews, this study highlights the scientific contribution by defining the applicability boundaries and complementary mechanisms of these approaches. The analysis reveals that while modeling lays the theoretical basis for eco-design and remanufacturing assessments, and optimization effectively resolves multi-objective trade-offs, these static methods struggle with the dynamic complexity of real-time operations where ML excels. However, ML is identified to be constrained by high data dependency and poor generalization in heterogeneous environments. Consequently, this review shows that the ‘cross-application’ of modeling methods and machine learning to construct hybrid models is essential for addressing complex nonlinear relationships and achieving accurate energy prediction throughout the entire life cycle. Finally, future directions such as transfer learning and digital twins are proposed to overcome current generalization bottlenecks, providing a theoretical foundation for the industry’s transition from passive energy assessment to active, intelligent energy management.
- 31 January 2026
- Published by MDPI AG in Applied Sciences
- Vol. 16 (3) , 1462
Open AccessResearch Progress on Energy Consumption Throughout the Life Cycle of Machine Tools
Machine tools are the major consumers of industrial energy, but their energy efficiency remains low, posing a serious challenge to sustainable manufacturing. The current literature predominantly focuses on isolated subsystems or specific operational phases (e.g., cutting parameters), lacking systematic evaluations of how different methodologies interact within the Life Cycle Assessment (LCA) framework. This paper provides a critical synthesis of three core methodologies—modeling methods, system parameter optimization, and machine learning (ML)—across the design/production, usage, and recycling stages. Unlike descriptive reviews, this study highlights the scientific contribution by defining the applicability boundaries and complementary mechanisms of these approaches. The analysis reveals that while modeling lays the theoretical basis for eco-design and remanufacturing assessments, and optimization effectively resolves multi-objective trade-offs, these static methods struggle with the dynamic complexity of real-time operations where ML excels. However, ML is identified to be constrained by high data dependency and poor generalization in heterogeneous environments. Consequently, this review shows that the ‘cross-application’ of modeling methods and machine learning to construct hybrid models is essential for addressing complex nonlinear relationships and achieving accurate energy prediction throughout the entire life cycle. Finally, future directions such as transfer learning and digital twins are proposed to overcome current generalization bottlenecks, providing a theoretical foundation for the industry’s transition from passive energy assessment to active, intelligent energy management.
- 22 January 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (3) , 035507
Effects of laser pretreatment process parameters on the properties of jet electrodeposited Ni-Co-YSZ composite coatings
This work investigates how laser pretreatment parameters—scanning speed, spacing, and scan number—govern the microstructure and performance of electrodeposited Ni-Co-YSZ composite coatings. SEM with 3D profiling, XRD, microhardness, and Corrosion resistance were employed. The composite coatings mainly exhibited an FCC phase structure under the investigated processing conditions, dominated by a close-packed (111) texture. Moderate pretreatment markedly improves surface leveling/densification and refines crystallites, giving the smallest average size. The parameter set ‘400 mm s −1 , 50 μm, five scans’ delivers the best overall properties: microhardness of 546.58 HV, corrosion current density of 6.309 μA cm −2 , and polarization resistance of 6.929 kΩ cm 2 . The study found that the improved hardness and corrosion resistance of the coating are the result of a synergistic effect of Hall-Petch strengthening and the dense passivation film formed by the (111) texture of the coating. Insufficient or excessive laser treatment can lead to surface growth or remelting-induced coarsening and more defects on the substrate, thereby affecting the subsequent electrodeposition of the composite coating and reducing the hardness and corrosion resistance of the coating.
- 22 January 2026
- Published by IOP Publishing in Physica Scripta
- Vol. 101 (3) , 035507
Effects of laser pretreatment process parameters on the properties of jet electrodeposited Ni-Co-YSZ composite coatings
This work investigates how laser pretreatment parameters—scanning speed, spacing, and scan number—govern the microstructure and performance of electrodeposited Ni-Co-YSZ composite coatings. SEM with 3D profiling, XRD, microhardness, and Corrosion resistance were employed. The composite coatings mainly exhibited an FCC phase structure under the investigated processing conditions, dominated by a close-packed (111) texture. Moderate pretreatment markedly improves surface leveling/densification and refines crystallites, giving the smallest average size. The parameter set ‘400 mm s −1 , 50 μm, five scans’ delivers the best overall properties: microhardness of 546.58 HV, corrosion current density of 6.309 μA cm −2 , and polarization resistance of 6.929 kΩ cm 2 . The study found that the improved hardness and corrosion resistance of the coating are the result of a synergistic effect of Hall-Petch strengthening and the dense passivation film formed by the (111) texture of the coating. Insufficient or excessive laser treatment can lead to surface growth or remelting-induced coarsening and more defects on the substrate, thereby affecting the subsequent electrodeposition of the composite coating and reducing the hardness and corrosion resistance of the coating.
- Open Access
Research Progress on the Influence of Cathode Materials on Thermal Runaway Behavior of Lithium-Ion Batteries
The structure, chemical composition, thermal stability, and abuse responses of cathode materials are critical to the safety and economy of lithium-ion batteries (LIBs). This review systematically summarizes advances in research on how cathode materials influence LIB thermal runaway (TR) behavior. It analyzes the oxygen release from cathodes in TR mechanisms and the hazards of such oxygen generation during TR, expounds on how differences in cathode structure, chemical composition, and thermal stability affect TR behavior, and summarizes the thermal characteristics of LIBs with different cathodes under mechanical, electrical, and thermal abuse. Results indicate that oxygen released from cathode decomposition during TR oxidizes electrolytes, releasing substantial heat and gas and causing more severe TR hazards. Structural instability of cathodes leads to accelerated release of lattice oxygen, speeding up TR initiation. Chemical composition regulates thermal stability, phase transition pathways, and gas generation rates during TR, while elemental ratios affect the ease of TR triggering. Cathodes with poor thermal stability have lower thermal decomposition onset temperatures, making TR more likely to occur and intensifying reaction severity. All three abuse types trigger inherent risks of cathodes, inducing TR and significantly increasing its occurrence probability. Differences in intrinsic properties further extend to the system level, also influencing thermal runaway propagation and fire dynamics at the module level. Future research focusing on the intrinsic properties of cathodes and external abuse is of great significance for addressing LIB TR behavior.
Open AccessResearch Progress on the Influence of Cathode Materials on Thermal Runaway Behavior of Lithium-Ion Batteries
The structure, chemical composition, thermal stability, and abuse responses of cathode materials are critical to the safety and economy of lithium-ion batteries (LIBs). This review systematically summarizes advances in research on how cathode materials influence LIB thermal runaway (TR) behavior. It analyzes the oxygen release from cathodes in TR mechanisms and the hazards of such oxygen generation during TR, expounds on how differences in cathode structure, chemical composition, and thermal stability affect TR behavior, and summarizes the thermal characteristics of LIBs with different cathodes under mechanical, electrical, and thermal abuse. Results indicate that oxygen released from cathode decomposition during TR oxidizes electrolytes, releasing substantial heat and gas and causing more severe TR hazards. Structural instability of cathodes leads to accelerated release of lattice oxygen, speeding up TR initiation. Chemical composition regulates thermal stability, phase transition pathways, and gas generation rates during TR, while elemental ratios affect the ease of TR triggering. Cathodes with poor thermal stability have lower thermal decomposition onset temperatures, making TR more likely to occur and intensifying reaction severity. All three abuse types trigger inherent risks of cathodes, inducing TR and significantly increasing its occurrence probability. Differences in intrinsic properties further extend to the system level, also influencing thermal runaway propagation and fire dynamics at the module level. Future research focusing on the intrinsic properties of cathodes and external abuse is of great significance for addressing LIB TR behavior.
- 1 July 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (7) , 075984
Microstructure and corrosion behavior of ni-Co-YSZ composite coatings fabricated via friction-assisted jet plating under high current densities
Ni-Co alloy coatings are widely used for their mechanical and corrosion-resistant properties, but their performance can be further enhanced through nanoparticle reinforcement. In this study, Ni-Co alloy coatings doped with nano-yttria-stabilized zirconia (nano-YSZ) were fabricated using friction-assisted jet plating. The effects of varying current densities and nano-YSZ concentrations on coating performance were systematically investigated. The incorporation of nano-YSZ significantly improved surface quality, microhardness, adhesion, and corrosion resistance of the composite coatings. The nanocomposite coating demonstrated superior mechanical and adhesive properties at an added nano-YSZ concentration of 4 g l−1 and a current density of 180 A dm−2, achieving a microhardness of 517.1 HV and an adhesion force of 30.7 N. Corrosion tests revealed excellent resistance, with a corrosion current density as low as 7.964 × 10−7 A cm−2 and an intact surface after 144 h of salt spray exposure. These results demonstrate that friction-assisted jet plating of Ni–Co–YSZ nanocomposites offers a promising route for producing high-performance protective coatings, with potential applications in demanding engineering environments.
- 1 July 2025
- Published by IOP Publishing in Physica Scripta
- Vol. 100 (7) , 075984
Microstructure and corrosion behavior of ni-Co-YSZ composite coatings fabricated via friction-assisted jet plating under high current densities
Ni-Co alloy coatings are widely used for their mechanical and corrosion-resistant properties, but their performance can be further enhanced through nanoparticle reinforcement. In this study, Ni-Co alloy coatings doped with nano-yttria-stabilized zirconia (nano-YSZ) were fabricated using friction-assisted jet plating. The effects of varying current densities and nano-YSZ concentrations on coating performance were systematically investigated. The incorporation of nano-YSZ significantly improved surface quality, microhardness, adhesion, and corrosion resistance of the composite coatings. The nanocomposite coating demonstrated superior mechanical and adhesive properties at an added nano-YSZ concentration of 4 g l−1 and a current density of 180 A dm−2, achieving a microhardness of 517.1 HV and an adhesion force of 30.7 N. Corrosion tests revealed excellent resistance, with a corrosion current density as low as 7.964 × 10−7 A cm−2 and an intact surface after 144 h of salt spray exposure. These results demonstrate that friction-assisted jet plating of Ni–Co–YSZ nanocomposites offers a promising route for producing high-performance protective coatings, with potential applications in demanding engineering environments.
- Open Access
- 25 May 2025
- Published by MDPI AG in Magnetochemistry
- Vol. 11 (6) , 46
Research on 3D Magnetic Memory Signals Induced by Circular Hole Defects
Metal magnetic memory testing technology can not only detect macroscopic defects in ferromagnetic materials but also rapidly and conveniently detect early damage and stress concentration areas of components. Therefore, it is widely used in the nondestructive testing of ferromagnetic materials. However, the mechanism of magnetic memory detection is not yet clarified, and experimental research is unsystematic. Previous studies mainly focus on the normal and tangential components of magnetic memory signals (MMSs), and the third directional component is rarely considered, resulting in problems such as missed detection and misjudgement in practical applications. In this research, specimens without and with a circular hole defect were designed, and the correlation between the 3D MMS and the defect size, as well as the applied load, were investigated using tensile tests. Magnetic parameters were defined to characterize the stress and defect-induced abnormal magnetic change. The effects of applied load and defect size on magnetic parameters were discussed. The experimental results showed that the peak–valley difference in the 3D MMS increases with increasing load and defect size, and the peak–valley spacing in the 3D MMS is not influenced by applied load but increases with increasing defect size. The 3D MMS gradient exhibits a good correlation with the equivalent stress along the loading direction. Additionally, the applied load and defect size were quantitatively evaluated by utilizing the Lissajous figure area generated from the X and Z components of the 3D MMS. Finally, a nonlinear fitting equation for defect size evaluation was presented. This study can provide a theoretical basis for the quantitative detection and evaluation of defect size and stress in engineering applications.
- 25 May 2025
- Published by MDPI AG in Magnetochemistry
- Vol. 11 (6) , 46
Open AccessResearch on 3D Magnetic Memory Signals Induced by Circular Hole Defects
Metal magnetic memory testing technology can not only detect macroscopic defects in ferromagnetic materials but also rapidly and conveniently detect early damage and stress concentration areas of components. Therefore, it is widely used in the nondestructive testing of ferromagnetic materials. However, the mechanism of magnetic memory detection is not yet clarified, and experimental research is unsystematic. Previous studies mainly focus on the normal and tangential components of magnetic memory signals (MMSs), and the third directional component is rarely considered, resulting in problems such as missed detection and misjudgement in practical applications. In this research, specimens without and with a circular hole defect were designed, and the correlation between the 3D MMS and the defect size, as well as the applied load, were investigated using tensile tests. Magnetic parameters were defined to characterize the stress and defect-induced abnormal magnetic change. The effects of applied load and defect size on magnetic parameters were discussed. The experimental results showed that the peak–valley difference in the 3D MMS increases with increasing load and defect size, and the peak–valley spacing in the 3D MMS is not influenced by applied load but increases with increasing defect size. The 3D MMS gradient exhibits a good correlation with the equivalent stress along the loading direction. Additionally, the applied load and defect size were quantitatively evaluated by utilizing the Lissajous figure area generated from the X and Z components of the 3D MMS. Finally, a nonlinear fitting equation for defect size evaluation was presented. This study can provide a theoretical basis for the quantitative detection and evaluation of defect size and stress in engineering applications.
- Open Access
Analysis of State-of-Charge Estimation Methods for Li-Ion Batteries Considering Wide Temperature Range
Lithium-ion batteries are the core energy storage technology for electric vehicles and energy storage systems. Accurate state-of-charge (SOC) estimation is critical for optimizing battery performance, ensuring safety, and predicting battery lifetime. However, SOC estimation faces significant challenges under extreme temperatures and complex operating conditions. This review systematically examines the research progress on SOC estimation techniques over a wide temperature range, focusing on two mainstream approaches: model improvement and data-driven methods. The model improvement method enhances temperature adaptability through temperature compensation and dynamic parameter adjustment. Still, it has limitations in dealing with the nonlinear behavior of batteries and accuracy and real-time performance at extreme temperatures. In contrast, the data-driven method effectively copes with temperature fluctuations and complex operating conditions by extracting nonlinear relationships from historical data. However, it requires high-quality data and substantial computational resources. Future research should focus on developing high-precision, temperature-adaptive models and lightweight real-time algorithms. Additionally, exploring the deep coupling of physical models and data-driven methods with multi-source heterogeneous data fusion technology can further improve the accuracy and robustness of SOC estimation. These advancements will promote the safe and efficient application of lithium batteries in electric vehicles and energy storage systems.
Open AccessAnalysis of State-of-Charge Estimation Methods for Li-Ion Batteries Considering Wide Temperature Range
Lithium-ion batteries are the core energy storage technology for electric vehicles and energy storage systems. Accurate state-of-charge (SOC) estimation is critical for optimizing battery performance, ensuring safety, and predicting battery lifetime. However, SOC estimation faces significant challenges under extreme temperatures and complex operating conditions. This review systematically examines the research progress on SOC estimation techniques over a wide temperature range, focusing on two mainstream approaches: model improvement and data-driven methods. The model improvement method enhances temperature adaptability through temperature compensation and dynamic parameter adjustment. Still, it has limitations in dealing with the nonlinear behavior of batteries and accuracy and real-time performance at extreme temperatures. In contrast, the data-driven method effectively copes with temperature fluctuations and complex operating conditions by extracting nonlinear relationships from historical data. However, it requires high-quality data and substantial computational resources. Future research should focus on developing high-precision, temperature-adaptive models and lightweight real-time algorithms. Additionally, exploring the deep coupling of physical models and data-driven methods with multi-source heterogeneous data fusion technology can further improve the accuracy and robustness of SOC estimation. These advancements will promote the safe and efficient application of lithium batteries in electric vehicles and energy storage systems.
- Open Access
- 25 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23) , 10939
Quality Evaluation of Effective Abrasive Grains Micro-Edge Honing Based on Trapezoidal Fuzzy Analytic Hierarchy Process and Set Pair Analysis
Studying the factors affecting machining accuracy, surface quality, and machining efficiency in the powerful honing machining process system, analyzing the basic law between various errors and machining quality, exploring the method of evaluating the quality of honing, and improving the machining quality and transmission performance of hardened gears has important engineering application value. Firstly, this paper establishes an effective abrasive grains micro-edge honing quality evaluation model, proposes a method based on the Trapezoidal Fuzzy Analytic Hierarchy Process (Tra-FAHP) and Set Pair Analysis (SPA) to comprehensively evaluate the quality of the honing process, and obtains the influence weights of each factor on the quality of honing. Secondly, the paper analyzes the influence rules of three types of abrasive grain sizes on helix error, tooth pitch error, tooth profile error, surface roughness, and honing efficiency. Finally, the correctness of the established comprehensive evaluation model of honing quality was verified with the threshold method and weights. The research results show that the model can correctly evaluate the quality of hardened gear honing and can be applied to studying the influence of abrasive grain micro-edge honing on machining characteristics.
- 25 November 2024
- Published by MDPI AG in Applied Sciences
- Vol. 14 (23) , 10939
Open AccessQuality Evaluation of Effective Abrasive Grains Micro-Edge Honing Based on Trapezoidal Fuzzy Analytic Hierarchy Process and Set Pair Analysis
Studying the factors affecting machining accuracy, surface quality, and machining efficiency in the powerful honing machining process system, analyzing the basic law between various errors and machining quality, exploring the method of evaluating the quality of honing, and improving the machining quality and transmission performance of hardened gears has important engineering application value. Firstly, this paper establishes an effective abrasive grains micro-edge honing quality evaluation model, proposes a method based on the Trapezoidal Fuzzy Analytic Hierarchy Process (Tra-FAHP) and Set Pair Analysis (SPA) to comprehensively evaluate the quality of the honing process, and obtains the influence weights of each factor on the quality of honing. Secondly, the paper analyzes the influence rules of three types of abrasive grain sizes on helix error, tooth pitch error, tooth profile error, surface roughness, and honing efficiency. Finally, the correctness of the established comprehensive evaluation model of honing quality was verified with the threshold method and weights. The research results show that the model can correctly evaluate the quality of hardened gear honing and can be applied to studying the influence of abrasive grain micro-edge honing on machining characteristics.