TMTerry D. Melendy

Terry D. Melendy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Terry D. Melendy has a total of 5 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Evaluating Snow Pavement Strength in Remote Cold Environments via California Bearing Ratio (CBR) and Russian Snow Penetrometer (RSP) Combined Testing

    by Katie L. Duggan DiDominic, Margarita Ordaz, Terry D. Melendy, Chrestien M. Charlebois

    Accurate assessment of compacted snow strength is critical for ensuring the safety and performance of snow runways in cold environments. The Russian Snow Penetrometer (RSP) is widely used in snow science and engineering due to its simplicity, portability, and capability for rapid field measurements under extreme conditions. Conversely, the California Bearing Ratio (CBR) test remains the benchmark for evaluating the load-bearing capacity of conventional granular materials but is seldom applied to snow because of logistical constraints and the material’s complex mechanical behavior. The relationship between these two pavement evaluation tools remains poorly defined. This work investigates how RSP strength indices relate to CBR measurements to determine whether the RSP can serve as a practical proxy for snow pavement load-bearing capacity. Side-by-side field measurements of snow pavement strength were collected over a 30 h period at two test section locations. Both methods captured temporal strength increases and spatial variability, with consistently higher values at the second site attributed to extended sintering. A moderate linear correlation (R2 = 0.44) between RSP and CBR results supports a quantifiable relationship between the two methods. These findings begin to bridge the gap between conventional pavement testing and snow-specific strength evaluation, demonstrating the potential of the RSP for rapid assessment of snow runways. Continued data collection and analysis will refine this relationship and strengthen its applicability for operational use.


  • Open Access

    Compressed Snow Blocks: Evaluating the Feasibility of Adapting Earth Block Technology for Cold Regions

    by Katie L. Duggan DiDominic, Terry D. Melendy, Chrestien M. Charlebois

    Snow construction plays a crucial role in military operations in cold regions, providing tactical fortifications, thermal insulation, and emergency infrastructure in environments where conventional building materials are scarce or require extensive infrastructure for support. Current snow construction methods, including manual piling and compaction, are labor-intensive and inconsistent, limiting their use in large-scale or time-sensitive operations. This study explores the feasibility of adapting a compressed earth block (CEB) machine to produce compressed snow blocks (CSBs) as modular, uniform building units for cold-region applications. Using an AECT Impact 2001A hydraulic press, naturally occurring snow was processed with a snowblower and compacted at maximum operating pressure (i.e., 20,684 kPa) to evaluate block formation, dimensional consistency, and density. The machine successfully produced relatively consistent CSBs, but the initial 3–4 blocks following block height adjustment were generally unsuccessful (e.g., incorrect block height or collapsed/broke) while the machine reached its steady state cyclic condition. These blocks were discarded and excluded from the dataset. The successful CSBs had mean block heights of 7.76 ± 0.56 cm and densities comparable to ice (i.e., 0.83 g/cm3). Variations in block height and mass may be attributed to manual snow loading and minor material impurities. While the dataset is limited, the results warrant further investigation into this technology, particularly regarding CSB strength (i.e., hardness and compressive strength) and performance under variable snow and environmental conditions. Mechanized snow compaction using existing CEB technology is technically feasible and capable of producing uniform, structurally stable CSBs but requires further investigation and modifications to reach its full potential. With design improvements such as automated snow feeding, cold-resistant components, and system winterization, this approach could enable scalable CSB production for rapid, on-site construction of snow-based structures in Arctic environments, supporting the military and civilian needs.


  • Open Access

    Evaluating Snow Pavement Strength in Remote Cold Environments via California Bearing Ratio (CBR) and Russian Snow Penetrometer (RSP) Combined Testing

    by Katie L. Duggan DiDominic, Margarita Ordaz, Terry D. Melendy, Chrestien M. Charlebois

    Accurate assessment of compacted snow strength is critical for ensuring the safety and performance of snow runways in cold environments. The Russian Snow Penetrometer (RSP) is widely used in snow science and engineering due to its simplicity, portability, and capability for rapid field measurements under extreme conditions. Conversely, the California Bearing Ratio (CBR) test remains the benchmark for evaluating load-bearing capacity of conventional granular materials but is seldom applied to snow because of logistical constraints and the material’s complex mechanical behavior. To address this gap, this study presents side-by-side field measurements of snow pavement strength using RSP and CBR over a 30-hr period at two test section locations. Both methods captured temporal strength increases and spatial variability, with consistently higher values at the second site attributed to extended sintering. A moderate linear correlation (R² = 0.44) between RSP and CBR results confirms RSP’s potential as a proxy for load-bearing capacity in snow-covered terrains. These findings contribute to bridging the gap between traditional pavement testing and snow-specific methods, advancing the development of robust, rapid assessment tools for snow runway design and safety. Ongoing work aims to expand the dataset of paired RSP and CBR measurements to refine this relationship and establish a reliable conversion framework for operational use.


  • Open Access

    Compressed Snow Blocks: Evaluating the Feasibility of Adapting Earth Block Technology for Cold Regions

    by Katie L. Duggan DiDominic, Terry D. Melendy, Chrestien M. Charlebois

    Snow construction plays a crucial role in military operations in cold regions, providing tactical fortifications, thermal insulation, and emergency infrastructure in environments where conventional building materials are scarce or require extensive infrastructure to support. Research into optimized snow compaction techniques has informed the design of snow-based protective structures, runways, and shelters. This study tested whether a conventional compressed earth block (CEB) machine could be used to produce compressed snow blocks (CSBs) suitable for construction applications in cold environments. The machine successfully formed CSBs with relatively consistent dimensions (i.e., block height), demonstrating feasibility and reliability in shaping snow for structural purposes. Density measurements of the snow blocks were more consistent with ice, indicating potential viability in load-bearing applications, but suggesting that the pressure applied during production may not be necessary to reach a sufficient block strength depending on its intended end-use. While mechanical strength was not assessed, these initial findings support further investigation into optimizing this new snow compaction technique, the material properties, and block durability under environmental stressors (e.g., temperature fluctuations). Additional testing and development are required to refine this approach for faster, more efficient snow compaction for sustainable construction in cold regions.

  • Ballistic protection using snow

    by George L. Blaisdell, Terry D. Melendy, Marin N. Blaisdell