Marin Nicole Blaisdell
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Research Interests
Marin Nicole Blaisdell has a total of 3 co-authors. Here are the top co-authors by number of shared publications:
Ian Baker
Thayer School of Engineering, Dartmouth College, Hanover, NH 03755, U.S.A.
2 shared publicationsGeorge L. Blaisdell
1 shared publication- Terry D. Melendy
US Army Engineer Research and Development Center Cold Regions Research and Engineering Laboratory (ERDC-CRREL), Hanover, NH 03755, USA
1 shared publication
Latest Publications
- Open Access
- 30 December 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-20
Comment on egusphere-2025-4383
In order to understand the effects of strain rate on the mechanical response of snow containing an ice lens perpendicular to the loading direction, specimens with and without ice lenses were compressed at several different rates from 4 x 10-4 to 1.2 x 10-2 s-1. It was found that snow columns with an included ice lens follow the same behavior as homogeneous snow for the range of strain rates tested, the sole difference being a six-fold increase in stress at a given strain when an ice lens is present. For all samples, low strain rates (4 x 10-4 to 1.2 x 10-3 s-1) resulted in a smooth steady increase in stress with increasing strain, whereas at high strain rates (4 x 10-3 to 1.2 x 10-2 s-1) two loading regimes occurred; up to ~20 % strain stresses minimally increased, while higher strains led to a more rapid stress increase. Snow columns both with and without an ice lens showed the highest resistance to loading at intermediate rates (2.1 x 10-3 to 3 x 10-3 s-1) which allowed for reconfiguration of the ice particles whilst inducing pressure sintering to strengthen existing bonds. Stress differences between aged and fresh snow were distinct but not as large as those between ice lens-containing and homogenous snow, indicating that ice lenses have a higher contribution to snow strength than sintering alone.
- 30 December 2025
- Published by Copernicus GmbH
- Vol. 2025, 1-20
Open AccessComment on egusphere-2025-4383
In order to understand the effects of strain rate on the mechanical response of snow containing an ice lens perpendicular to the loading direction, specimens with and without ice lenses were compressed at several different rates from 4 x 10-4 to 1.2 x 10-2 s-1. It was found that snow columns with an included ice lens follow the same behavior as homogeneous snow for the range of strain rates tested, the sole difference being a six-fold increase in stress at a given strain when an ice lens is present. For all samples, low strain rates (4 x 10-4 to 1.2 x 10-3 s-1) resulted in a smooth steady increase in stress with increasing strain, whereas at high strain rates (4 x 10-3 to 1.2 x 10-2 s-1) two loading regimes occurred; up to ~20 % strain stresses minimally increased, while higher strains led to a more rapid stress increase. Snow columns both with and without an ice lens showed the highest resistance to loading at intermediate rates (2.1 x 10-3 to 3 x 10-3 s-1) which allowed for reconfiguration of the ice particles whilst inducing pressure sintering to strengthen existing bonds. Stress differences between aged and fresh snow were distinct but not as large as those between ice lens-containing and homogenous snow, indicating that ice lenses have a higher contribution to snow strength than sintering alone.
- Open Access
- 14 November 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-20
Behavior of Snow Containing an Ice Lens under Compressive Loading
In order to understand the effects of strain rate on the mechanical response of snow containing an ice lens perpendicular to the loading direction, specimens with and without ice lenses were compressed at several different rates from 4 x 10-4 to 1.2 x 10-2 s-1. It was found that snow columns with an included ice lens follow the same behavior as homogeneous snow for the range of strain rates tested, the sole difference being a six-fold increase in stress at a given strain when an ice lens is present. For all samples, low strain rates (4 x 10-4 to 1.2 x 10-3 s-1) resulted in a smooth steady increase in stress with increasing strain, whereas at high strain rates (4 x 10-3 to 1.2 x 10-2 s-1) two loading regimes occurred; up to ~20 % strain stresses minimally increased, while higher strains led to a more rapid stress increase. Snow columns both with and without an ice lens showed the highest resistance to loading at intermediate rates (2.1 x 10-3 to 3 x 10-3 s-1) which allowed for reconfiguration of the ice particles whilst inducing pressure sintering to strengthen existing bonds. Stress differences between aged and fresh snow were distinct but not as large as those between ice lens-containing and homogenous snow, indicating that ice lenses have a higher contribution to snow strength than sintering alone.
- 14 November 2025
- Published by Copernicus GmbH in EGUsphere
- Vol. 2025, 1-20
Open AccessBehavior of Snow Containing an Ice Lens under Compressive Loading
In order to understand the effects of strain rate on the mechanical response of snow containing an ice lens perpendicular to the loading direction, specimens with and without ice lenses were compressed at several different rates from 4 x 10-4 to 1.2 x 10-2 s-1. It was found that snow columns with an included ice lens follow the same behavior as homogeneous snow for the range of strain rates tested, the sole difference being a six-fold increase in stress at a given strain when an ice lens is present. For all samples, low strain rates (4 x 10-4 to 1.2 x 10-3 s-1) resulted in a smooth steady increase in stress with increasing strain, whereas at high strain rates (4 x 10-3 to 1.2 x 10-2 s-1) two loading regimes occurred; up to ~20 % strain stresses minimally increased, while higher strains led to a more rapid stress increase. Snow columns both with and without an ice lens showed the highest resistance to loading at intermediate rates (2.1 x 10-3 to 3 x 10-3 s-1) which allowed for reconfiguration of the ice particles whilst inducing pressure sintering to strengthen existing bonds. Stress differences between aged and fresh snow were distinct but not as large as those between ice lens-containing and homogenous snow, indicating that ice lenses have a higher contribution to snow strength than sintering alone.
- 1 September 2021
- Published by Elsevier in International Journal of Impact Engineering
- Vol. 155
Ballistic protection using snow
- 1 September 2021
- Published by Elsevier in International Journal of Impact Engineering
- Vol. 155
Ballistic protection using snow