XZXiaofei Zhao

Xiaofei Zhao

*This is an algorithmically generated author record based on publicly available information.

Xiaofei Zhao has a total of 27 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • A Dual-Band Wideband U-Slot Resonant Metasurface Antenna Array for Millimeter-Wave Applications Using Characteristic Mode Analysis

    by Zelong Wang, Fangfang Fan, Rongsheng Li, Yunke Mo, Jiahao Li, Xiaofei Zhao

    This communication presents a dual-band millimeter-wave (mmW) antenna array with a U-slot resonant metasurface antenna (U-RMA) design. Using characteristic mode analysis (CMA), we analyzed a U-RMA, incorporating the feeding slot and feed line to identify dominant resonant modes, mode interactions, and the impact of capacitive coupling from auxiliary patches. The integration of metallic strips and vias along the x-direction effectively suppresses surface waves, resulting in a 2 dB gain improvement in the higher frequency band for the element. The CMA then extended to the current distribution of a 1 × 8 array, excluding the feeding structure. Experimental results show reflection coefficient bandwidths of 26.6% (22.8–29.8 GHz) and 20.9% (33.4–41.2 GHz) for the n258, n257, and n260 bands, with stable radiation patterns and cross-polarization levels below -22 dB at 25, 29, 36, and 39 GHz. The measured peak realized gain is 15.2 dBi. Beam-scanning simulations demonstrate the array’s capability to steer the main beam with low scan loss and acceptable sidelobe levels, highlighting its potential for advanced wireless communication applications.


  • High-Order Resonating Cavity-Backed Slot Antenna Array Based on Contactless Air-Filled Substrate-Integrated Waveguide and Transition to Inverted Grounded Coplanar Gap Waveguide

    by Xiaofei Zhao, Zehong Yan, Yingying Bi, Fangfang Fan, Dongquan Sun, Bing Wei, Enlin Wang, Zelong Wang, Rongsheng Li

    A contactless planar slot antenna array is proposed in this paper with high realized radiation efficiency. To simplify the feeding network, slot elements in subarray are excited by the back cavity with a high-order resonating mode (the TE 430 mode). To reduce the loss and increase the efficiency, entire antenna array, including the resonating cavity and feeding network, is realized by low-loss contactless air-filled substrate integrated waveguide (CLAF-SIW). In addition, inverted grounded coplanar gap waveguide (IGCPGW) is firstly proposed for measurements, using the contactless ridge substrate integrated waveguide (CLRSIW) as the transition to connect the CLAF-SIW. A 8×6 slot array with 2×2 subarrays is fabricated and fastened only by metal screws. From 36.92GHz to 40GHz, the measured reflection coefficient is better than -10dB and the realized radiation efficiency is greater than 78.6%. The measured peak realized radiation efficiency is 89.4% at 38GHz.


  • Wideband Compact Circularly Polarized SICL-Fed S-Dipole Array for Millimeter-Wave Applications

    by Zelong Wang, Fangfang Fan, Xiaofei Zhao, Rongsheng Li, Yunke Mo

    This work presents a wideband circularly polarized (CP) antenna array for millimeter-wave (mm-Wave) frequencies, leveraging substrate integrated coaxial line (SICL) for excitation. The CP element incorporates metallized vias, virtual ground (VG) patches, and inverted S-shaped strips. Subsequently, a 4 × 4 CP sequential rotation (SR) array is designed with a compact configuration that uses a single-layer PCB for the radiation layer and a multilayer PCB for the feeding layer. Fabricated prototypes exhibit an impedance bandwidth of 46.6% (25.17-40.45 GHz), a 3 dB axial ratio (AR) bandwidth exceeding 42.8% (25.9- 40 GHz), and a maximum gain of 17.87 dBic. With its compact size, high gain, wide band, and low processing cost, the antenna array is suitable for Beyond 5G (B5G) and 6G millimeter-wave communication systems.


  • Differentially-Fed Slot Array Antenna Backed With High-Order Resonating Cavity Loading Slow-Wave Top–Bottom Double Pins

    by Xiaofei Zhao, Fangfang Fan, Zehong Yan, Dongquan Sun, Bing Wei, Enlin Wang, Zelong Wang, Honghuan Zhu, Yanfeng Li

    A novel slot array antenna based on a rectangular waveguide (RWG) cavity using the high-order resonating mode is introduced in this paper. A TE 440 -mode radiation cavity is used to excite 4×4 radiation slot elements with a specific distribution that ensures in-phase fields. To achieve a wide 1-dB gain bandwidth, slow-wave top-bottom double pins (TBDPs) are positioned near the radiation slots within the radiation cavity. This helps to simultaneously improve directivity, impedance matching and eliminate grating lobes. A differential feeding strategy is deployed, employing the TE 120 -mode feeding cavity to excite both coupling slots with identical amplitude and 180° phase difference. The measurement and simulation results of the proposed cavity-backed slot antenna are in good agreement. The measured results reveal notable achievements, including an impedance bandwidth (|S 11 |<-10 dB) of 9% (14.2 to 15.54 GHz), and a 1-dB gain bandwidth of 8.05% (14.3 to 15.5 GHz). Furthermore, the measured peak realized gain is 18.87dBi and the maximum realized aperture efficiency is 86.2%.


  • Contactless Air-Filled Substrate Integrated Cavity-Backed Slot Antenna Array With Improved Printed Ridge Gap Waveguide Feeding Network

    by Xiaofei Zhao, Zehong Yan, Fangfang Fan, Dongquan Sun, Bing Wei, Enlin Wang, Honghuan Zhu, Yang Dai, Xiaosong Liu

    A contactless air-filled substrate integrated cavity-backed slot antenna array is designed utilizing gap waveguide technology in this paper. To enhance realized aperture efficiency, a contactless air-filled substrate integrated waveguide (CLAF-SIW) is implemented to construct a TE210-mode resonance cavity for feeding 2×2 slot elements. Moreover, an improved printed ridge gap waveguide (I-PRGW) is proposed for the first time to achieve the feeding network for feeding each air-filled resonator cavity uniformly with the same amplitude and phase. In order to mitigate the sensitivity of the antenna to the relative position between the coupling slot and the feed transmission line, the shielded stripline is integrated on the same dielectric layer as the coupling slot. Furthermore, the shielded stripline serves as the transition from the I-PRGW to the grounded coplanar waveguide (GCPW) for measurement. A physical prototype of the antenna array, comprising 4×4 slot elements, is manufactured. Experimental results demonstrate that the proposed antenna array, incorporating the transition structure, exhibits a wide impedance bandwidth ranging from 28.3GHz to 40GHz with a reflection coefficient better than -10dB, corresponding to a fractional bandwidth of 34.3%. The maximum realized boresight gain is measured to be 20.02 dBi at 38GHz, while achieving a maximum realized aperture efficiency of 67.8%.


  • Multibeam Forming With Arbitrary Radiation Power Ratios Based on a Conformal Amplitude–Phase-Controlled Metasurface

    by Xiaosong Liu, Zehong Yan, Enlin Wang, Xiaofei Zhao, Tianling Zhang, Fangfang Fan

    In this communication, we present a novel amplitude-phase-controlled metasurface (APCMS), which features a full 2π. phase coverage and amplitude variation from 0 to 1 for transmissive waves. By alternately cascading three ultrathin printed circuit boards (PCBs) and two curved 3D-printed substrates, the proposed APCMS is designed to be a cambered surface and can be applied to certain space-constrained scenarios. Different from phase-only controlled MSs, with the ability to impart a new degree of freedom, we use the APCMS to construct a spatial power divider by superimposing multiple aperture fields assigned to amplitude weighting coefficients. As a proof-of-concept example, two quarter-cylindrical APCMS-based spatial power dividers are designed to generate equal-power and unequal-power triple-beam radiation patterns at different and same elevation angles, respectively. A prototype of an equal-power divider is fabricated and measured to verify the proposed strategy. The results show that upon illumination of a feed horn, the maximum difference among the realized gains of the three beams is less than 0.9 dB at 12 GHz. Their 3-dB gain bandwidths are 26.7%, 19.5%, and 23.3%. Our study holds potential applications in multibeam shaping and multiple target tracking systems.


  • A Wideband Compact Printed Dipole Antenna Array With SICL Feeding Network for 5G Application

    by Fang-Fang Fan, Qing-Lin Chen, Yun-Xue Xu, Xiao-Fei Zhao, Ji-Chao Feng, Ze-Hong Yan

    A wideband compact printed dipole antenna array with an element size of 0.16 λ 0 × 0.34 λ 0 is proposed for millimeter-wave (mmW) applications, particularly for 5G applications. The two patches of the dipole are printed on two different layers to achieve a wide bandwidth of 50% (24-40 GHz) for SWR < 2. Ground-signal-ground (GSG) transmission line construction with a height difference between the feeding via and the two shorting vias is employed to achieve a relatively symmetrical radiation pattern. An antenna array consisting of the proposed antenna and a 1 to 8 substrate-integrated coaxial line (SICL) feeding network is fabricated and measured. Simulations are also used to verify the beam scanning performance (up to ±50°). The proposed compact printed dipole antenna is a good contender for 5G mmW applications due to its wide band, compact size, and good beam scanning performance.


  • Reflect–Transmit-Array Antenna With Independent Dual Circularly Polarized Beam Control

    by Jichao Feng, Zehong Yan, Shuyang Yang, Fangfang Fan, Tianling Zhang, Xiaosong Liu, Xiaofei Zhao, Qinglin Chen

    In this letter, we propose a dual-circularly polarized reflect-transmit-array antenna (RTA) with independent beam control. It can transmit left-hand circularly polarized (LHCP) wave as transmitarray antenna and reflect right-hand circularly polarized (RHCP) wave as reflectarray antenna at 8.7–10.2 GHz. In addition, 360° phase shift for each circularly polarized wave can be achieved by rotating the top and bottom patches. A 20 × 20- unit cell RTA is designed, fabricated, and measured. For the LHCP radiation, the measured results show that the 3 dB gain bandwidth and axial ratio (AR) bandwidth are 13.7% (8.8–10.1 GHz) and 15.9% (8.7–10.2 GHz), respectively. For the RHCP radiation, the measured 3 dB gain bandwidth and AR bandwidth are 11.4% (9.1–10.2 GHz) and 12.6% (8.9–10.1 GHz). The peak aperture efficiencies for LHCP and RHCP radiations are 45.5% at 9.2 GHz and 41.8% at 9.6 GHz, respectively.


  • Bifunctional Full-Space Metasurface Combining Pancharatnam–Berry and Propagation Phases

    by Xiaosong Liu, Zehong Yan, Enlin Wang, Xiaofei Zhao, Tianling Zhang, Fangfang Fan

    A bifunctional full-space metasurface (FS-MS) capable of generating reflective multiple vortex beams and focusing transmissive electromagnetic waves within different frequency bands is presented in this letter. The generation of vortex beams is based on the Pancharatnam–Berry (PB) phase, which exhibits the property of full phase control by rotating the orientation angle of an I-shaped patch. Meanwhile, this PB unit is backed by a metallic square loop frequency selective surface (FSS), which behaves as stopband and passband responses around 18 GHz and 12 GHz, respectively. By encoding PB phase to generate a certain phase response, four reflective vortex beams carrying orbital angular momentum (OAM) are achieved at a higher frequency band under normal incidence. On the other hand, the incident waves operating at a lower frequency band can pass through such an FSS-backed PB unit and be focused by a three-layer composite unit consisting of a polarization-conversion unit sandwiched by two orthogonal polarizers. Therefore, upon illumination of normal incident plane waves, the proposed FS-MS works as a multiple OAM beams generator and a focusing lens simultaneously. The proposed design can motivate the realizations of FS-MS and hold potential applications in intelligent housing systems.


  • Dual-Band Orthogonally-Polarized Dual-Beam Reflect-Transmit-Array With a Linearly Polarized Feeder

    by Xiaosong Liu, Zehong Yan, Enlin Wang, Xiaofei Zhao, Tianling Zhang, Fangfang Fan

    This communication presents a novel bifunctional metasurface (MS) combining the reflectarray (RA) and transmitarray (TA) with dual-band orthogonally polarized dual-beam characteristics. The proposed reflect-transmit-array (RTA) is capable of reflecting the $x$ -polarized incidence without changing its polarization state around 10 GHz while transmitting the $y$ -polarized incidence and converting it into the circularly polarized (CP) waves around 14 GHz. To completely cover the working frequency bands of both modes, an antipodal Vivaldi antenna (AVA) is introduced as the source feed due to its intrinsic ultrawideband characteristics. As a proof of concept demonstration, a prototype consisting of 20 $\times20$ elements is also designed, fabricated, and measured. We observe a good agreement between the measurement and simulation results that shows a peak gain of 26.2 dBi and 27.3 dBic, 1 dB gain bandwidth (BW) of 9.8–11.3 GHz (14.2%) and 12.8–14.2 GHz (10.4%), and peak aperture efficiency (AE) of 48.7% and 35.1% for the reflection and transmission modes, respectively.