J. David McDonald
Research Subjects
J. David McDonald has a total of 7 co-authors. Here are the top co-authors by number of shared publications:
Richard J. Kerekes
Pulp and Paper Centre,CANADA. The University of British Columbia,CANADA
2 shared publicationsJ. O. Heymer
452577 AFT , Montreal , Quebec , Canada
1 shared publicationJoe R. Zhao
Tri-Y Environmental Research Institute,CANADA
1 shared publicationJoe Zhao
Tri-Y Environmental Research Institute
1 shared publicationR. J. Kerekes
Pulp and Paper Centre , The University of British Columbia , Vancouver , Canada
1 shared publication- Richard J. Kerekes
Department of Chemical and Biological Engineering , University of British Columbia , Vancouver , Canada
1 shared publication
Latest Publications
- 11 September 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 36 (4) , 714-717
Bar forces in pulp refiners
Refiners develop pulp properties by applying forces on fibres during bar crossings. The size of these forces is critical in developing fibre properties while avoiding fibre shortening. This study has shown that bar force calculated from Specific Edge load (SEL) gives the same result as vector-based derivations of average bar force. Predicted forces agree reasonably well with ones measured by a novel piezo-electric sensor in refiner bars and forces estimated from measurements of fibre shortening.
- 11 September 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 36 (4) , 714-717
Bar forces in pulp refiners
Refiners develop pulp properties by applying forces on fibres during bar crossings. The size of these forces is critical in developing fibre properties while avoiding fibre shortening. This study has shown that bar force calculated from Specific Edge load (SEL) gives the same result as vector-based derivations of average bar force. Predicted forces agree reasonably well with ones measured by a novel piezo-electric sensor in refiner bars and forces estimated from measurements of fibre shortening.
- 27 April 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 36 (4) , 696-706
Refining pulp for tensile strength
Increased tensile strength of paper is a primary objective of low consistency refining. Although refining is typically controlled by Specific Refining Energy and Specific Edge Load, these parameters are not independent because both depend directly on power. To overcome this shortcoming, we derived simplified expressions for the number and intensity of impacts on pulp. The number of impacts reflects the capacity of the refiner to impose loading cycles on pulp. The intensity, combined with a response parameter, reflects the probability of a successful refining event at each impact. Based on these parameters, we employed an equation based on cumulative probability to predict tensile strength of pulp after refining.Non-linear fits of this equation to data from the literature for a wide range of pulps refined by various refiners gave response parameters that were remarkably similar ranging from 1.6 – 3.3 × 10 − 6 1.6\text{--}3.3\times {10^{-6}} kg/J. The resulting probability of successful refining events at each impact was found to be quite small, about 1–3 %. We postulated that this is likely due to most force being imposed at fibre crossings in the pulp network. Consequently, multiple cycles are required to expose other parts of fibres and new fibres to loadings. In summary, this new approach to characterizing refining reflects the stochastic nature of the process and enables a direct quantitative link between refiner operation and fibre development.
- 27 April 2021
- Published by Walter de Gruyter GmbH in Nordic Pulp & Paper Research Journal
- Vol. 36 (4) , 696-706
Refining pulp for tensile strength
Increased tensile strength of paper is a primary objective of low consistency refining. Although refining is typically controlled by Specific Refining Energy and Specific Edge Load, these parameters are not independent because both depend directly on power. To overcome this shortcoming, we derived simplified expressions for the number and intensity of impacts on pulp. The number of impacts reflects the capacity of the refiner to impose loading cycles on pulp. The intensity, combined with a response parameter, reflects the probability of a successful refining event at each impact. Based on these parameters, we employed an equation based on cumulative probability to predict tensile strength of pulp after refining.Non-linear fits of this equation to data from the literature for a wide range of pulps refined by various refiners gave response parameters that were remarkably similar ranging from 1.6 – 3.3 × 10 − 6 1.6\text{--}3.3\times {10^{-6}} kg/J. The resulting probability of successful refining events at each impact was found to be quite small, about 1–3 %. We postulated that this is likely due to most force being imposed at fibre crossings in the pulp network. Consequently, multiple cycles are required to expose other parts of fibres and new fibres to loadings. In summary, this new approach to characterizing refining reflects the stochastic nature of the process and enables a direct quantitative link between refiner operation and fibre development.
- 5 August 2020
- Published by BioResources in BioResources
- Vol. 15 (4) , 7319-7329
Perspectives on deriving mathematical models in pulp and paper science
Mathematical modelling is a powerful tool in science. Causal mathematical models based on a clear picture of how key variables interact enable a deeper understanding of a given situation and provide reliable predictions. This is a classic approach in science. Unfortunately, this approach is declining in pulp and paper-related research in favour of simply reporting experimental data. The lack of a framework provided by a model diminishes the value of much experimental work. Therefore, the increased use of mathematical models is encouraged, and this approach is illustrated via several practical examples from our work.
- 5 August 2020
- Published by BioResources in BioResources
- Vol. 15 (4) , 7319-7329
Perspectives on deriving mathematical models in pulp and paper science
Mathematical modelling is a powerful tool in science. Causal mathematical models based on a clear picture of how key variables interact enable a deeper understanding of a given situation and provide reliable predictions. This is a classic approach in science. Unfortunately, this approach is declining in pulp and paper-related research in favour of simply reporting experimental data. The lack of a framework provided by a model diminishes the value of much experimental work. Therefore, the increased use of mathematical models is encouraged, and this approach is illustrated via several practical examples from our work.
- Open Access
- 1 January 2019
- Published by Tsinghua University Press in Paper and Biomaterials
- Vol. 4 (1) , 1-6
Wet Pressing Models to Reduce Energy Consumption in Papermaking
Improved wet pressing reduces the need for drying and consequently energy needed in papermaking. Accordingly, it is desirable to optimize wet pressing, but the process is very complex with many interacting variables. It is therefore desirable to employ a mathematical model that accounts for the major variables to estimate the effects of changes in equipment and operating variables. This paper descibes such a model called the Decreasing Permeability Model (DPM). Mill and pilot plant applications over a wide range of basis weights for paper and paper board are described.
- 1 January 2019
- Published by Tsinghua University Press in Paper and Biomaterials
- Vol. 4 (1) , 1-6
Open AccessWet Pressing Models to Reduce Energy Consumption in Papermaking
Improved wet pressing reduces the need for drying and consequently energy needed in papermaking. Accordingly, it is desirable to optimize wet pressing, but the process is very complex with many interacting variables. It is therefore desirable to employ a mathematical model that accounts for the major variables to estimate the effects of changes in equipment and operating variables. This paper descibes such a model called the Decreasing Permeability Model (DPM). Mill and pilot plant applications over a wide range of basis weights for paper and paper board are described.
- 15 September 2017
- Published by BioResources in BioResources
- Vol. 12 (4) , 9520-9537
Pragmatic mathematical models of wet pressing in papermaking
This paper compares mathematical models developed over the years to estimate the moisture content of paper after wet pressing on paper machines. Models that assume all loading pressure to act upon water are discussed in detail. In contrast, most conventional models assume that pressure splits between a hydraulic component causing water removal and a structural component supported by the fibres. This assumption is shown to be questionable in light of theoretical considerations and experimental evidence. Despite their simpler nature, models based on hydraulic forces alone are often better able to account for experimental observations. The Decreasing Permeability (DP) model is the most complete model of this form and includes all major variables affecting pressing on paper machines, thereby enabling evaluation of key factors such as the relative importance of dewatering under flow-controlled and pressure-controlled conditions together with rewetting.
- 15 September 2017
- Published by BioResources in BioResources
- Vol. 12 (4) , 9520-9537
Pragmatic mathematical models of wet pressing in papermaking
This paper compares mathematical models developed over the years to estimate the moisture content of paper after wet pressing on paper machines. Models that assume all loading pressure to act upon water are discussed in detail. In contrast, most conventional models assume that pressure splits between a hydraulic component causing water removal and a structural component supported by the fibres. This assumption is shown to be questionable in light of theoretical considerations and experimental evidence. Despite their simpler nature, models based on hydraulic forces alone are often better able to account for experimental observations. The Decreasing Permeability (DP) model is the most complete model of this form and includes all major variables affecting pressing on paper machines, thereby enabling evaluation of key factors such as the relative importance of dewatering under flow-controlled and pressure-controlled conditions together with rewetting.