YJYi Jiang

Yi Jiang

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Yi Jiang has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Design of a Three-Beam Output Quasi-Optical Mode Converter for Higher Power Gyrotrons

    by Qili Huang, Linlin Hu, Lijun Yi, Shenggang Gong, Yongfei Xiang, Yi Jiang, Peng Hu, Luqi Zhang, Dimin Sun, Guowu Ma, et al.

  • A 210–225-GHz Wilkinson Power Divider/Combiner Based on Rectangular Waveguide for Traveling-Wave-Tube Applications

    by Xiuyuan Xu, Peng Hu, Dimin Sun, Jun Guo, Yi Jiang, Wenqiang Lei, Rui Song, Youhui He, Junzhi Wang, Luqi Zhang, et al.

    This article presents a waveguide Wilkinson power divider with high-power capacity for G-band (210–225 GHz) traveling-wave-tube (TWT) power combining. To begin with, a topology that integrates a lossy ceramic-loaded waveguide, a stepped twist section, a Y-junction, and short-circuit matching stubs is proposed and analyzed theoretically. The even odd mode model indicates that ceramic-loaded waveguides exhibit matched losses under odd-mode excitation while maintaining transparency under even-mode excitation, and the twist section provides the required 90° polarization rotation in less than $\lambda $ g/2. Then, full-wave simulations show return loss >19 dB and isolation >13 dB over 211–217 GHz, peaking at 29.4 dB at 211 GHz. With 200 W injected into each isolated port, the peak electric field everywhere remains well below breakdown, confirming high-power capacity. Parameter sweeps are performed on the length and width of the matching stub loaded on the terminal to ensure the tolerance characteristics of the device. At the same time, it was confirmed that the isolation only decreased by about 1 dB when the device accommodated a 0.2-mm CNC filet. Finally, a G-band vector network analyzer was used to measure the oxygen-free copper prototype manufactured by high-precision CNC milling. The measurement results are in good agreement with the simulation performance, verifying the feasibility of using it for power synthesis between terahertz (THz) TWTs.

  • A Novel Online Power Testing Method for High-Power Millimeter-Wave Systems

    by Qili Huang, Linlin Hu, Yi Jiang, Peng Hu, Luqi Zhang, Lijun Yi, Shenggang Gong, Dimin Sun, Guowu Ma, Xiao Jin, et al.

    This letter presents a novel online power measurement method for high-power millimeter-wave (MMW) systems. By investigating a model of electromagnetic wave incidence on the multilayer dielectric media, an analytical relationship between the power loss in the dielectric and the incident power was theoretically derived. Combined with temperature-dependent measurements of key parameters, this method enables the power measurement of millisecond level, 100-kW single-pulse high-power MMWs. This approach is expected to complement existing measurement methods, providing a versatile tool for power measurement across different time scales.

  • Novel G-Band Slot-Loaded Folded Waveguide Traveling Wave Tube

    by Luqi Zhang, Wenqiang Lei, Rui Song, Yi Jiang, Jun Guo, Xu Yao, Dimin Sun, Peng Hu, Guowu Ma

    In this letter, we report a novel G-band high-power traveling wave tube (TWT) using a modified slot-loaded folded waveguide (SLFWG) slow-wave structure (SWS). Firstly, it can be found that the coupling impedance of the modified SWS is greatly improved compared with the conventional structure by simulation results. Next, the whole tube is designed and fabricated using the SLFWG SWS. Finally, under the condition of 10% duty cycle, the experimental results show that the device has a maximum output power of 215 W at the frequency of 219 GHz, a 3-dB bandwidth of more than 3 GHz, and a power-bandwidth product of 666.5 W·GHz, which is basically consistent with the simulation results.


  • Open Access

    Study on G-band traveling wave tube based on piece-wise sine waveguide and sheet electron beam

    by Youhui He, Guowu Ma, Luqi Zhang, Yi Jiang, Wenqiang Lei, Rui Song, Dimin Sun, Xiuyuan Xu, Junzhi Wang, Hongbin Chen

    In this paper, a novel G-band high-power sheet electron beam traveling wave tube (TWT) is designed by integrating piece-wise sine waveguide and sheet electron beam. First, a sheet-beam electron-optical system is developed, combining a piece-wise transverse-interleaving open-periodic-permanent-magnet (STI-OPPM) system and a high-compression-ratio elliptical Pierce electron gun. The STI-OPPM system achieves a peak magnetization of 1.03 T, while the electron gun emits a 23 kV, 230 mA sheet electron beam with an area compression ratio of 18:1. Under the focus of this magnetic system, the sheet electron beam, which has a transverse to longitudinal ratio of 6:1, can be 100% transmitted at the distance of 100 mm. Meanwhile, based on this electron-optic system, a piece-wise-sine waveguide slow wave structure (SWS) of TWT is proposed. The analysis of SWS indicates that it has an operating bandwidth of 50 GHz and a coupling impedance of approximately 1.6 Ω near the center frequency. Furthermore, a new high-frequency system is designed by using the characteristics of the new slow wave structure combined with phase velocity tapering and broadband energy coupling structure. The simulation results of beam-wave interaction show that the device can produce more than 300 W power output in the frequency range from 190 GHz to 201 GHz under the condition of electron beam voltage of 23 kV and electron beam current of 230 mA. The maximum power output at 195 GHz is 410 W and the corresponding gain is 36.2 dB.


  • Open Access

    An electron-optical system based on superconducting coil for a 670 GHz traveling wave tube

    by Junzhi Wang, Yi Jiang, Luqi Zhang, Xiuyuan Xu, Youhui He, Wenqiang Lei, Rui Song, Dimin Sun, Guowu Ma

    This study proposes a novel electron-optical system (EOS) based on superconducting coils (SCs) for a 670 GHz traveling wave tube (TWT), demonstrating significant improvements in electron beam focusing capabilities. By utilizing magnetic field intensities significantly surpassing that of a permanent magnet, the electron beam is effectively compressed with the aim of achieving stable transmission of a current exceeding 30 mA through a channel with a diameter of 0.1 mm and a length of 100 mm. We developed and fabricated an electron gun operating at 23 kV with a current of 33 mA, aimed at assessing the feasibility of the SC EOS. In transmission experiments, we successfully obtained a collection electrode current approaching 24 mA, achieving an electron beam transmission rate of 76%. Furthermore, to assess the performance of the EOS, a preliminary design of a folded waveguide slow-wave structure for a 670 GHz TWT was developed. In the simulation analysis, an output power peak of 4.7 W at a frequency of 665 GHz was attained with an electron beam current of 30 mA.


  • Demonstration of a 220-GHz Wideband High Power Low Reflection Folded Waveguide Traveling-Wave Tube

    by Luqi Zhang, Rui Song, Wenqiang Lei, Yi Jiang, Xianfeng Tang, Qili Huang, Peng Hu, Wei Bai, Guowu Ma, Hongbin Chen, et al.

    In this article, we propose a low reflection folded waveguide (LRFWG) as the slow wave structure (SWS) for the development of a terahertz (THz) traveling-wave tube (TWT). Our simulation results show that the LRFWG SWS has lower reflection and larger coupling impedance compared to the conventional folded waveguide (FWG) SWS over a wide frequency range. Using this modified SWS, we have designed, simulated, and manufactured a wide-band high-power TWT operating in the G-band. The cold test results demonstrate that the reflection parameters at the input and output ports of the TWT are less than -13.8 dB from 200 to 240 GHz, confirming the effectiveness of our proposed structure. In addition, the hot test results show that the maximum output power of the 220 GHz LRFWG TWT amplifier reaches 31.2 W at 220 GHz, with a 3 dB bandwidth exceeding 23 GHz. The power-bandwidth product of the device is greater than 717.6 W $\cdot $ GHz, providing a demonstration of a wideband high power THz source.


  • Design and Fabricated on 0.67-THz Folded Waveguide Circuit

    by Yi Jiang, Wenqiang Lei, Luqi Zhang, Yongbin Zhang, Rui Song, Peng Hu, Linlin Hu, Zaojin Zeng, Guowu Ma, Hongbin Chen, et al.

  • A Wideband 220-GHz Traveling Wave Tube Based on Slotted Piecewise Sine Waveguide

    by Luqi Zhang, Guowu Ma, Yi Jiang, Rui Song, Wenqiang Lei, Wanghe Wei, Peng Hu, Hongbin Chen, Yanyu Wei

    A slotted piecewise sine waveguide (SPWSWG) is suggested as the slow wave structure (SWS) to develop the terahertz traveling wave tube (TWT). This letter is the first to report the SPWSWG SWS with the advantages of flat dispersion and large coupling impedance from our calculation. Based on this novel SWS, a wideband 220-GHz TWT has been designed, fabricated and tested. The cold test results show that the reflection parameters at the input and output port of the TWT are less than -15.2 dB in the frequency range of 209-235 GHz. Moreover, the hot test results demonstrate that the maximum saturated output power reaches 28.6 W at 215 GHz and the 3-dB bandwidth exceeds 15.5 GHz, which are basically consistent with the simulation results.


  • High-Power Millimeter-Wave Dummy Load Reflected Power Measurement Method Based on a Time-Domain Gate

    by Qili Huang, Dimin Sun, Linlin Hu, Tingting Zhuo, Peng Hu, Yi Jiang, Luqi Zhang, Xinrui Hu, Guowu Ma, Hongbin Chen, et al.

    This article presents a low-power measurement method for the reflected power of a high-power millimeter-wave dummy load. The proposed method extracts the unknown S-parameters of the fixtures and the dummy load by combining frequency-and time-domain S-parameters. In this way, it partially eliminates the effects of asymmetric fixtures. Experiments and error source analysis of the proposed method are carried out.