Patrick Huber
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Patrick Huber has a total of 14 co-authors. Here are the top co-authors by number of shared publications:
- Tobias Huber
Technische Universität Wien Institut für Tragkonstruktionen – Betonbau Karlsplatz 13/E212‐2 1040 Wien
8 shared publications - Johann Kollegger
Technische Universität Wien Institut für Tragkonstruktionen, Forschungsbereich Stahlbeton‐ und Massivbau Karlsplatz 13/212‐2 1040 Wien
6 shared publications Johann Kollegger
Institute of Structural Engineering, TU Wien Vienna Austria
5 shared publications- Michael Kleiser
ASFINAG Bau Management GmbH Fachbereich für Technik, Innovation und Umwelt Modecenterstraße 16 1030 Wien
2 shared publications Anton Schweighofer
Bridge Building Department Office of the Provincial Government of Lower Austria St Pölten Austria
1 shared publication- Anton Schweighofer
Vienna University of Technology
1 shared publication
Latest Publications
- Open Access
- 10 December 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (4) , 4166-4184
Influence of environmental conditions on the creep behavior of large‐scale concrete specimens
In this article, a testing campaign on large‐scale concrete specimens to study the influence of environmental conditions on their creep behavior for different member sizes is presented. This testing campaign is unique due to its specimen dimensions (cross‐sectional areas of up to 1 m2) and the continuous deformation measurements for over 6 years. To quantify the influence of the environmental conditions on the creep behavior, two types of test specimens were produced, consisting of the same concrete mixture but having different production dates (summer of 2017 and winter of 2018). The large‐scale specimens were stored outside and therefore exposed to real environmental conditions. The measurement data collected over more than 6 years show that the environmental conditions during the first year have a tremendous impact on the creep behavior of the large‐scale specimens. Furthermore, the experimentally determined creep compliance of the specimens produced in winter exceeded that of the specimens produced in summer.
- 10 December 2024
- Published by Wiley in Structural Concrete
- Vol. 26 (4) , 4166-4184
Open AccessInfluence of environmental conditions on the creep behavior of large‐scale concrete specimens
In this article, a testing campaign on large‐scale concrete specimens to study the influence of environmental conditions on their creep behavior for different member sizes is presented. This testing campaign is unique due to its specimen dimensions (cross‐sectional areas of up to 1 m2) and the continuous deformation measurements for over 6 years. To quantify the influence of the environmental conditions on the creep behavior, two types of test specimens were produced, consisting of the same concrete mixture but having different production dates (summer of 2017 and winter of 2018). The large‐scale specimens were stored outside and therefore exposed to real environmental conditions. The measurement data collected over more than 6 years show that the environmental conditions during the first year have a tremendous impact on the creep behavior of the large‐scale specimens. Furthermore, the experimentally determined creep compliance of the specimens produced in winter exceeded that of the specimens produced in summer.
- Open Access
- 16 April 2024
- Published by Wiley in Structural Concrete
- Vol. 25 (4) , 2784-2799
The Wieselburg Bridge collapse—Analysis of the shear capacity based on forensic data
This paper describes the structural aspects of the Wieselburg Bridge collapse in Austria. The original design and reinforcing details for this integral concrete bridge are discussed. The collapse of the bridge is re‐constructed based on forensic documentation of the failure. The results of structural analysis carried out using material properties obtained after failure are compared to the shear capacity obtained from various models and from test results from literature. The results are used to explain the cause of failure of the integral bridge under dead load.
- 16 April 2024
- Published by Wiley in Structural Concrete
- Vol. 25 (4) , 2784-2799
Open AccessThe Wieselburg Bridge collapse—Analysis of the shear capacity based on forensic data
This paper describes the structural aspects of the Wieselburg Bridge collapse in Austria. The original design and reinforcing details for this integral concrete bridge are discussed. The collapse of the bridge is re‐constructed based on forensic documentation of the failure. The results of structural analysis carried out using material properties obtained after failure are compared to the shear capacity obtained from various models and from test results from literature. The results are used to explain the cause of failure of the integral bridge under dead load.
- 8 June 2020
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 115 (10) , 811-820
Querkraftmodell für bestehende Stahlbetonbauteile mit aufgebogenen Längsstäben
Die historische Ausführungsform der aufgebogenen Längsstäbe zur Schubsicherung ist nach den heutigen Regelwerken nur bedingt vorgesehen. Bei der Bewertung von bestehenden Tragwerken steht der Ingenieur nun vor der Herausforderung, dass die Anwendung der Querkraftmodelle nach Eurocode 2 aufgrund von konstruktiven Regeln in vielen Fällen nicht möglich ist. An der TU Wien wurde deshalb ein Nachweiskonzept entwickelt, welches eine realistische Bewertung dieser Situation ermöglicht. Das Modell des potenziellen Schubrisses (PSC‐Modell) gründet auf detaillierten Analysen der Rissbilder von Versuchen und wurde mit Versuchsdatenbanken evaluiert. Das Potenzial des vorgestellten Modells konnte anhand der Nachrechnung einer realen Stahlbetonplattenbrücke aufgezeigt werden. Die neuen Erkenntnisse werden bereits in der neuen ÖNORM B4002‐8 zur Bewertung der Tragfähigkeit bestehender Tragwerke berücksichtigt, wodurch ein Bogen von der Grundlagenforschung in die Anwenderpraxis gespannt wurde.
- 8 June 2020
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 115 (10) , 811-820
Querkraftmodell für bestehende Stahlbetonbauteile mit aufgebogenen Längsstäben
Die historische Ausführungsform der aufgebogenen Längsstäbe zur Schubsicherung ist nach den heutigen Regelwerken nur bedingt vorgesehen. Bei der Bewertung von bestehenden Tragwerken steht der Ingenieur nun vor der Herausforderung, dass die Anwendung der Querkraftmodelle nach Eurocode 2 aufgrund von konstruktiven Regeln in vielen Fällen nicht möglich ist. An der TU Wien wurde deshalb ein Nachweiskonzept entwickelt, welches eine realistische Bewertung dieser Situation ermöglicht. Das Modell des potenziellen Schubrisses (PSC‐Modell) gründet auf detaillierten Analysen der Rissbilder von Versuchen und wurde mit Versuchsdatenbanken evaluiert. Das Potenzial des vorgestellten Modells konnte anhand der Nachrechnung einer realen Stahlbetonplattenbrücke aufgezeigt werden. Die neuen Erkenntnisse werden bereits in der neuen ÖNORM B4002‐8 zur Bewertung der Tragfähigkeit bestehender Tragwerke berücksichtigt, wodurch ein Bogen von der Grundlagenforschung in die Anwenderpraxis gespannt wurde.
- 14 August 2019
- Published by Wiley in Structural Concrete
- Vol. 21 (1) , 393-408
Experimental and theoretical study on the shear behavior of single‐ and multi‐span T‐ and I‐shaped post‐tensioned beams
In recent years, the assessment of the shear resistance of existing post‐tensioned multispan bridges has become a frequent task for civil engineers. New models developed for this purpose need to be verified, since the number of shear‐related results of tests executed under real loading conditions at the interior support of multispan systems is very limited. In this study, eight shear tests carried out on four specimens are presented. The effects of different prestressing grades, cross‐sections, and amounts of transverse reinforcement are investigated. Two test setups were used in order to reproduce the internal forces occurring at the interior and end supports, respectively, of actual multispan bridges. With the aid of close‐range photogrammetry, detailed measurements of the kinematics of the critical flexural‐shear cracks were performed. In this study, it is demonstrated that arching action plays a major role for the shear capacity of slender post‐tensioned beams. The predictions of the shear capacity determined with various shear design models show that these models are conservative, especially with respect to the shear capacity for the region around the interior supports. However, the evaluation of the models also shows that the flexural‐shear crack model yields very promising results of the shear capacity of post‐tensioned beams with low shear reinforcement ratios.
- 14 August 2019
- Published by Wiley in Structural Concrete
- Vol. 21 (1) , 393-408
Experimental and theoretical study on the shear behavior of single‐ and multi‐span T‐ and I‐shaped post‐tensioned beams
In recent years, the assessment of the shear resistance of existing post‐tensioned multispan bridges has become a frequent task for civil engineers. New models developed for this purpose need to be verified, since the number of shear‐related results of tests executed under real loading conditions at the interior support of multispan systems is very limited. In this study, eight shear tests carried out on four specimens are presented. The effects of different prestressing grades, cross‐sections, and amounts of transverse reinforcement are investigated. Two test setups were used in order to reproduce the internal forces occurring at the interior and end supports, respectively, of actual multispan bridges. With the aid of close‐range photogrammetry, detailed measurements of the kinematics of the critical flexural‐shear cracks were performed. In this study, it is demonstrated that arching action plays a major role for the shear capacity of slender post‐tensioned beams. The predictions of the shear capacity determined with various shear design models show that these models are conservative, especially with respect to the shear capacity for the region around the interior supports. However, the evaluation of the models also shows that the flexural‐shear crack model yields very promising results of the shear capacity of post‐tensioned beams with low shear reinforcement ratios.
- 1 May 2019
- Published by Elsevier in Engineering Structures
- Vol. 186, 26-42
Influence of aggregate interlock on the shear resistance of reinforced concrete beams without stirrups
- 1 May 2019
- Published by Elsevier in Engineering Structures
- Vol. 186, 26-42
Influence of aggregate interlock on the shear resistance of reinforced concrete beams without stirrups
- 1 October 2018
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 113 (10) , 705-715
Assessment of the shear resistance of multi-span prestressed concrete bridges with a low amount of stirrups The assessment of the load carrying capacity
- 1 October 2018
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 113 (10) , 705-715
Assessment of the shear resistance of multi-span prestressed concrete bridges with a low amount of stirrups The assessment of the load carrying capacity
- 1 September 2018
- Published by Elsevier in Engineering Structures
- Vol. 170, 91-102
Influence of loading conditions on the shear capacity of post-tensioned beams with low shear reinforcement ratios
- 1 September 2018
- Published by Elsevier in Engineering Structures
- Vol. 170, 91-102
Influence of loading conditions on the shear capacity of post-tensioned beams with low shear reinforcement ratios
- 2 November 2017
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 112 (11) , 714-722
Umlenkkräfte bei Satteldachbindern
Der Firstbereich bei Satteldachbindern stellt einen Diskontinuitätsbereich dar, an welchem unter Biegebeanspruchung Umlenkkräfte auftreten. Bei unzureichender Verbügelung können diese zu großen Rissweiten und damit zu einer Verminderung der Tragfähigkeit des Querschnitts führen. Seit geraumer Zeit fordern Normenwerke daher eine volle Verbügelung der nach einem einfachen Stabwerkmodell kalkulierten Umlenkkräfte. Zur Größe der aufnehmbaren Umlenkkraft zum Zeitpunkt der Rissbildung werden keine Regelungen getroffen und so gestaltet sich die Bewertung der Tragfähigkeit von Bestandsbauten schwierig. In diesem Artikel wird die experimentelle Untersuchung eines – einer realen Fabrikhalle nachempfundenen – Satteldachbinders mit unzureichender Verbügelung beschrieben. Die Ergebnisse der beiden großformatigen Vier‐Punkt‐Biegeversuche zeigen die erwartete Ablösung des Druckflansches und die damit verbundene Herabsetzung der Querschnittstragfähigkeit. Auf diesen Untersuchungen gründend, wird erstmalig ein physikalisches Modell zur Bestimmung der aufnehmbaren Umlenkkräfte vorgestellt und sein Potenzial anhand einer Parameterstudie mittels Finite‐Elemente‐Simulationen illustriert.
- 2 November 2017
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 112 (11) , 714-722
Umlenkkräfte bei Satteldachbindern
Der Firstbereich bei Satteldachbindern stellt einen Diskontinuitätsbereich dar, an welchem unter Biegebeanspruchung Umlenkkräfte auftreten. Bei unzureichender Verbügelung können diese zu großen Rissweiten und damit zu einer Verminderung der Tragfähigkeit des Querschnitts führen. Seit geraumer Zeit fordern Normenwerke daher eine volle Verbügelung der nach einem einfachen Stabwerkmodell kalkulierten Umlenkkräfte. Zur Größe der aufnehmbaren Umlenkkraft zum Zeitpunkt der Rissbildung werden keine Regelungen getroffen und so gestaltet sich die Bewertung der Tragfähigkeit von Bestandsbauten schwierig. In diesem Artikel wird die experimentelle Untersuchung eines – einer realen Fabrikhalle nachempfundenen – Satteldachbinders mit unzureichender Verbügelung beschrieben. Die Ergebnisse der beiden großformatigen Vier‐Punkt‐Biegeversuche zeigen die erwartete Ablösung des Druckflansches und die damit verbundene Herabsetzung der Querschnittstragfähigkeit. Auf diesen Untersuchungen gründend, wird erstmalig ein physikalisches Modell zur Bestimmung der aufnehmbaren Umlenkkräfte vorgestellt und sein Potenzial anhand einer Parameterstudie mittels Finite‐Elemente‐Simulationen illustriert.
- 10 October 2017
- Published by Wiley in Structural Concrete
- Vol. 19 (1) , 5-15
Full‐scale shear tests on post‐tensioned bridge girders of existing bridges
Many post‐tensioned girders of existing bridges contain a low amount of transverse reinforcement. The shear strength of these girders, calculated according to current semi‐probabilistic design codes, like Eurocode 2, is often less than that required in the codes. In this paper, the experimental results of four shear tests on post‐tensioned bridge girders of existing bridges are presented. The specimens were extracted from two different road bridges, both built in 1959. In this paper, the results of this test series are used to analyze the shear behavior and failure modes of existing post‐tensioned bridge structures with a low amount of shear reinforcement. Furthermore, the experimental results are compared with the shear strengths calculated according to various design codes. Finally, the shear behavior is analyzed according to the zone‐based, shear assessment concept with its refined shear models. The calculation results agree well with the data from the experiments.
- 10 October 2017
- Published by Wiley in Structural Concrete
- Vol. 19 (1) , 5-15
Full‐scale shear tests on post‐tensioned bridge girders of existing bridges
Many post‐tensioned girders of existing bridges contain a low amount of transverse reinforcement. The shear strength of these girders, calculated according to current semi‐probabilistic design codes, like Eurocode 2, is often less than that required in the codes. In this paper, the experimental results of four shear tests on post‐tensioned bridge girders of existing bridges are presented. The specimens were extracted from two different road bridges, both built in 1959. In this paper, the results of this test series are used to analyze the shear behavior and failure modes of existing post‐tensioned bridge structures with a low amount of shear reinforcement. Furthermore, the experimental results are compared with the shear strengths calculated according to various design codes. Finally, the shear behavior is analyzed according to the zone‐based, shear assessment concept with its refined shear models. The calculation results agree well with the data from the experiments.
- 3 November 2016
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 111 (11) , 706-715
Rechnerische Beurteilung der Schubtragfähigkeit einer Spannbetonbrücke mit geringem Querkraft bewehrungsgrad
- 3 November 2016
- Published by Wiley in Beton- und Stahlbetonbau
- Vol. 111 (11) , 706-715
Rechnerische Beurteilung der Schubtragfähigkeit einer Spannbetonbrücke mit geringem Querkraft bewehrungsgrad