NANaomi G. Asimow

Naomi G. Asimow

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Naomi G. Asimow has a total of 38 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Using Network Observations to Constrain CO and CO 2 Emissions From an Oil Refinery in the San Francisco Bay Area

    by Milan Y. Patel, Naomi G. Asimow, Anna R. Winter, Yishu Zhu, Ronald C. Cohen

    Point sources are often major contributors of greenhouse gas and air pollutant emissions in urban areas. Dense air monitoring networks provide a unique avenue for studying point source emissions over long time periods. Here, we use the Berkeley Environmental Air‐quality and CO 2 Network (BEACO 2 N) to study CO 2 and air pollutant emissions from an oil refinery in the city of Richmond, CA. We identify 266 plumes crossing one or more sites in the BEACO 2 N network during 2022–2023 as having a source at the refinery and quantify CO 2 emissions using the Gaussian plume model. The refinery is modeled as two point sources, and total CO 2 emissions are found to be 61.3 ± 6.3 kg s −1 , in close agreement with the EPA Facility Level Information on GreenHouse gases Tool inventory and Carbon Mapper measurements. Additionally, plume composition was found to vary, with CO/CO 2 enhancement ratios ranging from 0 to 5 ppb/ppm. Taking the average CO/CO 2 ratio, CO emissions are estimated to be roughly 3,000 mt, a sizable amount compared to the city's estimated non‐refinery CO emissions of 6,800 mt. In addition, we show that dense monitoring networks provide a unique resource for point source emissions quantification with broad application to plumes of varying size and composition, and recommendations are laid out for future applications.


  • Open Access

    Development of a Machine Learning Benchmark for Inferring CO 2 Emissions de-novo From Measurements of a Real-Time Sensor Network

    by Naomi Asimow, Ronald Cohen

    Real-time, spatially dense networks of sensors measuring CO 2 concentrations hold great promise for obtaining fine-grained attribution of the location, sectors, and trends of CO 2 emissions in cities. Without these sensors, emissions are tracked via emissions inventories, which are expensive to maintain and based on assumptions such as accurate reporting by emitters. Treating the emissions inventory as the Bayesian prior updated by sensor observations grounds the posterior emissions in real measurements. However, this method is prior-dependent, computationally expensive, and impractical where emissions inventories are unreliable or unavailable. We present a novel benchmark dataset for machine learning-based CO 2 emissions mapping from sparse ground-based sensor networks, addressing a gap in supervised learning resources for atmospheric inverse modeling. Our dataset consists of 1 km resolution CO 2 concentration simulations over CONUS using WRF-Chem paired with Vulcan v3.0 emission fields, structured as city-sized patches (48 km × 48 km) with 72-hour temporal windows and augmented with spatial masking to simulate realistic sensor coverage (5-100% pixel coverage). We evaluate baseline models including linear regression, XGBoost, and a modified U-Net architecture. The U-Net significantly outperforms tabular models and maintains the ability to identify large point sources at 50% coverage but losing fine spatial detail below 25% coverage. Validation on real sensor data from Houston and the Bay Area reveals challenges in translating from simulated to real-world conditions, with 10-20 sensors in each city providing insufficient coverage for detailed emission mapping, highlighting the need for denser networks and improved models to enable practical urban emissions monitoring from sparse observations.

  • Open Access

    Using Network Observations to Constrain CO and CO2 Emissions from an Oil Refinery in the San Francisco Bay Area

    by Milan Y Patel, Naomi G Asimow, Anna R Winter, Yishu Zhu, Ronald Carl Cohen

    Point sources are often major contributors of greenhouse gas and air pollutant emissions in urban areas. Dense air monitoring networks provide a unique avenue for studying point source emissions over long time periods. Here, we use the Berkeley Environmental Air-quality and CO2 Network (BEACO2N) to study CO2 and air pollutant emissions from an oil refinery in the city of Richmond, CA. We identify 266 plumes crossing one or more sites in the BEACO2N network during 2022-2023 as having a source at the refinery and quantify CO2 emissions using the Gaussian plume model. The refinery is modeled as two point sources, and total CO2 emissions are found to be 61.3 ± 6.3 kg s-1, in close agreement with the EPA FLIGHT inventory and Carbon Mapper measurements. Additionally, plume composition was found to vary, with CO/CO2 enhancement ratios ranging from 0–5 ppb/ppm. Taking the average CO/CO2 ratio, CO emissions are estimated to be roughly 3,000 mt, a sizable amount compared to the city’s estimated non-refinery CO emissions of 6,800 mt. In addition, we show that dense monitoring networks provide a unique resource for point source emissions quantification with broad application to plumes of varying size and composition, and recommendations are laid out for future applications.

  • Open Access

    Differences in Regional Home Heating Behavior in Three U.S. Cities Revealed by Ground‐Based Sensor Network

    by Naomi G. Asimow, Milan Y. Patel, Yishu Zhu, Anna R. Winter, Kevin R. Gurney, William M. Berelson, Alexander J. Turner, Ronald C. Cohen

    Home heating preferences vary dramatically with regional climate. The temperature at which residents turn on natural gas home heating systems (critical temperature) varies by as much as 25°C from the northern to southern United States (U.S.). Here we derive temperature dependent CO2 emissions in three U.S. cities using a dense ground‐based CO2 observation network. A Bayesian inverse modeling methodology is used to update a 1‐km emission inventory in each of the three cities. This method is able to correctly identify the critical temperature of home heating even when this information is withheld from the prior inventory, as verified by natural gas distribution data. Variance in regional heating practices has not been previously demonstrated with ground‐based networks of CO2 observations. This result provides evidence that a Bayesian inverse modeling framework is sensitive to emissions of the home heating sector.


  • Open Access

    Sustained Performance of Low-Cost Air Quality Sensors in Long-Term Deployments

    by Anna R. Winter, Yishu Zhu, Naomi G. Asimow, Milan Y. Patel, Ronald C. Cohen

    Over the past decade, technological advancements and the growing demand for higher spatial resolution in air quality measurements have driven the widespread deployment of low-cost electrochemical gas sensors. These sensors are inexpensive, compact, easy to deploy, and have potential to detect variability in ambient air. While short-term sensor performance and calibration assessments have been well-documented, research on sensor reliability in long-term deployments remains limited. The Berkeley Environmental Air Quality and CO2 Network (BEACO2N) is a dense, long-term sensor network measuring O3, NO, NO2, and CO using electrochemical gas sensors, in addition to CO2 and PM2.5 with other sensors. Here, we evaluate the performance of the Alphasense NO2-B43F, Ox-B431, NO-B4, and CO-B4 sensors over the course of 3 years in the San Francisco Bay Area. We find consistent performance in the calibrated data over the 3 years. These findings highlight the reliability of long-term sensor use with appropriate calibration techniques and suggest the sensors remain suitable for extended deployments without requiring replacement.


  • Open Access

    Plume Detection and Emissions Quantification Potential Using a Dense Sensor Network

    by Milan Y. Patel, Yishu Zhu, Anna R. Winter, Naomi G. Asimow, Ronald C. Cohen


  • Open Access

    Differences in Regional Home Heating Behavior in Three U.S. Cities Revealed by Ground-Based Sensor Network

    by Naomi G Asimow, Milan Y Patel, Yishu Zhu, Anna R Winter, Kevin Robert Gurney, William M. Berelson, Alex Turner, Ronald Carl Cohen

    Home heating preferences vary dramatically with regional climate. The temperature at which residents turn on natural gas home heating systems (critical temperature) varies by as much as 25 °C from the northern to southern United States. Here we derive temperature dependent CO2 emissions in three U.S. cities using a dense ground-based CO2 observation network: the Berkeley Environmental Air Quality and CO2 Network (BEACO2N). A Bayesian inverse modeling methodology is used to update a 1 km emission inventory in each of the three cities. This method is able to correctly identify the critical temperature of home heating even when this information is withheld from the prior inventory, as verified by natural gas distribution data. Variance in regional heating practices has not been previously demonstrated with ground-based networks of CO2 observations. This result provides evidence that a Bayesian inverse modeling framework is sensitive to emissions of the home heating sector.

  • Open Access

    Observing Anthropogenic and Biogenic CO2 Emissions in Los Angeles Using a Dense Sensor Network

    by Jinsol Kim, William M. Berelson, Nick Everett Rollins, Naomi G. Asimow, Catherine Newman, Ronald C. Cohen, John B. Miller, Brian C. McDonald, Jeff Peischl, Scott J. Lehman

    Urban areas are major contributors to greenhouse gas emissions, necessitating effective monitoring systems to evaluate mitigation strategies. A dense sensor network, such as the Berkeley Environmental Air-quality & CO2 Observation Network (BEACO2N), offers a unique opportunity to monitor urban emissions at high spatial resolution. Here, we describe a simple approach to quantifying urban emissions with sufficient precision to constrain seasonal and annual trends. Measurements from 12 BEACO2N sites in Los Angeles (called the USC Carbon Census) are analyzed within a box model framework. By combining CO2 and CO observations, we partition total CO2 emissions into fossil fuel and biogenic emissions. We infer temporal changes in biogenic emissions that correspond to the MODIS enhanced vegetation index (EVI) and show that net biogenic exchange can consume up to 60% of fossil fuel emissions in the growing season during daytime hours. While we use the first year of observations to describe seasonal variation, we demonstrate the feasibility of this approach to constrain annual and longer trends.


  • Open Access

    A Scalable Calibration Method for Enhanced Accuracy in Dense Air Quality Monitoring Networks

    by Anna R. Winter, Yishu Zhu, Naomi G. Asimow, Milan Y. Patel, Ronald C. Cohen

    Deployment of large numbers of low capital cost sensors to increase the spatial density of air quality measurements enables applications that build on mapping air at neighborhood scales. Effective deployment requires not only low capital costs for observations but also a simultaneous reduction in labor costs. The Berkeley Environmental Air Quality and CO2 Network (BEACO2N) is a sensor network measuring O3, CO, NO, and NO2, particulate matter (PM2.5), and CO2 at dozens of locations in cities where it is deployed. Here, we describe a low labor cost in situ field calibration for the BEACO2N O3, CO, NO, and NO2 sensors. This method identifies and leverages uniform periods in concentrations across the network for calibration. The calibration achieves high accuracy and low biases with respect to temperature, humidity, and concentration, with coefficients of determination and root mean square errors of 0.88 and 3.70 ppb for O3, 0.66 and 3.16 ppb for NO2, and 0.79 and 1.58 ppb for NO. Performance of the CO sensor is 0.90 and 33.3 ppb at a site colocated with reference measurements. The method is a crucial step toward lowering operational costs of delivering accurate measurements in dense networks employing large numbers of inexpensive air quality sensors.