Milan Y. Patel
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Interests
Milan Y. Patel has a total of 11 co-authors. Here are the top co-authors by number of shared publications:
- Anna R. Winter
University of California Berkeley
8 shared publications - Naomi G. Asimow
University of California Berkeley
8 shared publications - Ronald Carl Cohen
Department of Earth and Planetary Science, University of California, Berkeley, Berkeley, CA 94720, USA
8 shared publications - Yishu Zhu
University of California Berkeley
7 shared publications - Alexander J. Turner
Department of Atmospheric and Climate Science, University of Washington, Seattle, WA 98195, USA
2 shared publications - Jillian Lee Dempsey
University of North Carolina at Chapel Hill
2 shared publications
Latest Publications
- Open Access
- 25 March 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (6)
Using Network Observations to Constrain CO and CO 2 Emissions From an Oil Refinery in the San Francisco Bay Area
Point sources are often major contributors of greenhouse gas and air pollutant emissions in urban areas. Dense air monitoring networks provide a unique avenue for studying point source emissions over long time periods. Here, we use the Berkeley Environmental Air‐quality and CO 2 Network (BEACO 2 N) to study CO 2 and air pollutant emissions from an oil refinery in the city of Richmond, CA. We identify 266 plumes crossing one or more sites in the BEACO 2 N network during 2022–2023 as having a source at the refinery and quantify CO 2 emissions using the Gaussian plume model. The refinery is modeled as two point sources, and total CO 2 emissions are found to be 61.3 ± 6.3 kg s −1 , in close agreement with the EPA Facility Level Information on GreenHouse gases Tool inventory and Carbon Mapper measurements. Additionally, plume composition was found to vary, with CO/CO 2 enhancement ratios ranging from 0 to 5 ppb/ppm. Taking the average CO/CO 2 ratio, CO emissions are estimated to be roughly 3,000 mt, a sizable amount compared to the city's estimated non‐refinery CO emissions of 6,800 mt. In addition, we show that dense monitoring networks provide a unique resource for point source emissions quantification with broad application to plumes of varying size and composition, and recommendations are laid out for future applications.
- 25 March 2026
- Published by American Geophysical Union (AGU) in Journal of Geophysical Research: Atmospheres
- Vol. 131 (6)
Open AccessUsing Network Observations to Constrain CO and CO 2 Emissions From an Oil Refinery in the San Francisco Bay Area
Point sources are often major contributors of greenhouse gas and air pollutant emissions in urban areas. Dense air monitoring networks provide a unique avenue for studying point source emissions over long time periods. Here, we use the Berkeley Environmental Air‐quality and CO 2 Network (BEACO 2 N) to study CO 2 and air pollutant emissions from an oil refinery in the city of Richmond, CA. We identify 266 plumes crossing one or more sites in the BEACO 2 N network during 2022–2023 as having a source at the refinery and quantify CO 2 emissions using the Gaussian plume model. The refinery is modeled as two point sources, and total CO 2 emissions are found to be 61.3 ± 6.3 kg s −1 , in close agreement with the EPA Facility Level Information on GreenHouse gases Tool inventory and Carbon Mapper measurements. Additionally, plume composition was found to vary, with CO/CO 2 enhancement ratios ranging from 0 to 5 ppb/ppm. Taking the average CO/CO 2 ratio, CO emissions are estimated to be roughly 3,000 mt, a sizable amount compared to the city's estimated non‐refinery CO emissions of 6,800 mt. In addition, we show that dense monitoring networks provide a unique resource for point source emissions quantification with broad application to plumes of varying size and composition, and recommendations are laid out for future applications.
- Open Access
- 5 August 2025
- Published by Wiley
Using Network Observations to Constrain CO and CO2 Emissions from an Oil Refinery in the San Francisco Bay Area
Point sources are often major contributors of greenhouse gas and air pollutant emissions in urban areas. Dense air monitoring networks provide a unique avenue for studying point source emissions over long time periods. Here, we use the Berkeley Environmental Air-quality and CO2 Network (BEACO2N) to study CO2 and air pollutant emissions from an oil refinery in the city of Richmond, CA. We identify 266 plumes crossing one or more sites in the BEACO2N network during 2022-2023 as having a source at the refinery and quantify CO2 emissions using the Gaussian plume model. The refinery is modeled as two point sources, and total CO2 emissions are found to be 61.3 ± 6.3 kg s-1, in close agreement with the EPA FLIGHT inventory and Carbon Mapper measurements. Additionally, plume composition was found to vary, with CO/CO2 enhancement ratios ranging from 0–5 ppb/ppm. Taking the average CO/CO2 ratio, CO emissions are estimated to be roughly 3,000 mt, a sizable amount compared to the city’s estimated non-refinery CO emissions of 6,800 mt. In addition, we show that dense monitoring networks provide a unique resource for point source emissions quantification with broad application to plumes of varying size and composition, and recommendations are laid out for future applications.
- 5 August 2025
- Published by Wiley
Open AccessUsing Network Observations to Constrain CO and CO2 Emissions from an Oil Refinery in the San Francisco Bay Area
Point sources are often major contributors of greenhouse gas and air pollutant emissions in urban areas. Dense air monitoring networks provide a unique avenue for studying point source emissions over long time periods. Here, we use the Berkeley Environmental Air-quality and CO2 Network (BEACO2N) to study CO2 and air pollutant emissions from an oil refinery in the city of Richmond, CA. We identify 266 plumes crossing one or more sites in the BEACO2N network during 2022-2023 as having a source at the refinery and quantify CO2 emissions using the Gaussian plume model. The refinery is modeled as two point sources, and total CO2 emissions are found to be 61.3 ± 6.3 kg s-1, in close agreement with the EPA FLIGHT inventory and Carbon Mapper measurements. Additionally, plume composition was found to vary, with CO/CO2 enhancement ratios ranging from 0–5 ppb/ppm. Taking the average CO/CO2 ratio, CO emissions are estimated to be roughly 3,000 mt, a sizable amount compared to the city’s estimated non-refinery CO emissions of 6,800 mt. In addition, we show that dense monitoring networks provide a unique resource for point source emissions quantification with broad application to plumes of varying size and composition, and recommendations are laid out for future applications.
- 24 July 2025
- Published by American Chemical Society (ACS) in ACS ES&T Air
- Vol. 2 (8) , 1478-1487
Observational Inferences of NOx and CO Emission Factors for Vehicles and Homes in the San Francisco Bay Area
- 24 July 2025
- Published by American Chemical Society (ACS) in ACS ES&T Air
- Vol. 2 (8) , 1478-1487
Observational Inferences of NOx and CO Emission Factors for Vehicles and Homes in the San Francisco Bay Area
- Open Access
- 5 July 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (13)
Differences in Regional Home Heating Behavior in Three U.S. Cities Revealed by Ground‐Based Sensor Network
Home heating preferences vary dramatically with regional climate. The temperature at which residents turn on natural gas home heating systems (critical temperature) varies by as much as 25°C from the northern to southern United States (U.S.). Here we derive temperature dependent CO2 emissions in three U.S. cities using a dense ground‐based CO2 observation network. A Bayesian inverse modeling methodology is used to update a 1‐km emission inventory in each of the three cities. This method is able to correctly identify the critical temperature of home heating even when this information is withheld from the prior inventory, as verified by natural gas distribution data. Variance in regional heating practices has not been previously demonstrated with ground‐based networks of CO2 observations. This result provides evidence that a Bayesian inverse modeling framework is sensitive to emissions of the home heating sector.
- 5 July 2025
- Published by American Geophysical Union (AGU) in Geophysical Research Letters
- Vol. 52 (13)
Open AccessDifferences in Regional Home Heating Behavior in Three U.S. Cities Revealed by Ground‐Based Sensor Network
Home heating preferences vary dramatically with regional climate. The temperature at which residents turn on natural gas home heating systems (critical temperature) varies by as much as 25°C from the northern to southern United States (U.S.). Here we derive temperature dependent CO2 emissions in three U.S. cities using a dense ground‐based CO2 observation network. A Bayesian inverse modeling methodology is used to update a 1‐km emission inventory in each of the three cities. This method is able to correctly identify the critical temperature of home heating even when this information is withheld from the prior inventory, as verified by natural gas distribution data. Variance in regional heating practices has not been previously demonstrated with ground‐based networks of CO2 observations. This result provides evidence that a Bayesian inverse modeling framework is sensitive to emissions of the home heating sector.
- Open Access
- 9 June 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (6) , 4329-4335
Sustained Performance of Low-Cost Air Quality Sensors in Long-Term Deployments
Over the past decade, technological advancements and the growing demand for higher spatial resolution in air quality measurements have driven the widespread deployment of low-cost electrochemical gas sensors. These sensors are inexpensive, compact, easy to deploy, and have potential to detect variability in ambient air. While short-term sensor performance and calibration assessments have been well-documented, research on sensor reliability in long-term deployments remains limited. The Berkeley Environmental Air Quality and CO2 Network (BEACO2N) is a dense, long-term sensor network measuring O3, NO, NO2, and CO using electrochemical gas sensors, in addition to CO2 and PM2.5 with other sensors. Here, we evaluate the performance of the Alphasense NO2-B43F, Ox-B431, NO-B4, and CO-B4 sensors over the course of 3 years in the San Francisco Bay Area. We find consistent performance in the calibrated data over the 3 years. These findings highlight the reliability of long-term sensor use with appropriate calibration techniques and suggest the sensors remain suitable for extended deployments without requiring replacement.
- 9 June 2025
- Published by American Chemical Society (ACS) in ACS Sensors
- Vol. 10 (6) , 4329-4335
Open AccessSustained Performance of Low-Cost Air Quality Sensors in Long-Term Deployments
Over the past decade, technological advancements and the growing demand for higher spatial resolution in air quality measurements have driven the widespread deployment of low-cost electrochemical gas sensors. These sensors are inexpensive, compact, easy to deploy, and have potential to detect variability in ambient air. While short-term sensor performance and calibration assessments have been well-documented, research on sensor reliability in long-term deployments remains limited. The Berkeley Environmental Air Quality and CO2 Network (BEACO2N) is a dense, long-term sensor network measuring O3, NO, NO2, and CO using electrochemical gas sensors, in addition to CO2 and PM2.5 with other sensors. Here, we evaluate the performance of the Alphasense NO2-B43F, Ox-B431, NO-B4, and CO-B4 sensors over the course of 3 years in the San Francisco Bay Area. We find consistent performance in the calibrated data over the 3 years. These findings highlight the reliability of long-term sensor use with appropriate calibration techniques and suggest the sensors remain suitable for extended deployments without requiring replacement.
- Open Access
- 29 May 2025
- Published by American Chemical Society (ACS) in ACS ES&T Air
- Vol. 2 (6) , 1099-1106
Plume Detection and Emissions Quantification Potential Using a Dense Sensor Network
- 29 May 2025
- Published by American Chemical Society (ACS) in ACS ES&T Air
- Vol. 2 (6) , 1099-1106
Open AccessPlume Detection and Emissions Quantification Potential Using a Dense Sensor Network
- Open Access
- 12 March 2025
- Published by Wiley
Differences in Regional Home Heating Behavior in Three U.S. Cities Revealed by Ground-Based Sensor Network
Home heating preferences vary dramatically with regional climate. The temperature at which residents turn on natural gas home heating systems (critical temperature) varies by as much as 25 °C from the northern to southern United States. Here we derive temperature dependent CO2 emissions in three U.S. cities using a dense ground-based CO2 observation network: the Berkeley Environmental Air Quality and CO2 Network (BEACO2N). A Bayesian inverse modeling methodology is used to update a 1 km emission inventory in each of the three cities. This method is able to correctly identify the critical temperature of home heating even when this information is withheld from the prior inventory, as verified by natural gas distribution data. Variance in regional heating practices has not been previously demonstrated with ground-based networks of CO2 observations. This result provides evidence that a Bayesian inverse modeling framework is sensitive to emissions of the home heating sector.
- 12 March 2025
- Published by Wiley
Open AccessDifferences in Regional Home Heating Behavior in Three U.S. Cities Revealed by Ground-Based Sensor Network
Home heating preferences vary dramatically with regional climate. The temperature at which residents turn on natural gas home heating systems (critical temperature) varies by as much as 25 °C from the northern to southern United States. Here we derive temperature dependent CO2 emissions in three U.S. cities using a dense ground-based CO2 observation network: the Berkeley Environmental Air Quality and CO2 Network (BEACO2N). A Bayesian inverse modeling methodology is used to update a 1 km emission inventory in each of the three cities. This method is able to correctly identify the critical temperature of home heating even when this information is withheld from the prior inventory, as verified by natural gas distribution data. Variance in regional heating practices has not been previously demonstrated with ground-based networks of CO2 observations. This result provides evidence that a Bayesian inverse modeling framework is sensitive to emissions of the home heating sector.
- Open Access
- 28 January 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (5) , 2599-2610
A Scalable Calibration Method for Enhanced Accuracy in Dense Air Quality Monitoring Networks
Deployment of large numbers of low capital cost sensors to increase the spatial density of air quality measurements enables applications that build on mapping air at neighborhood scales. Effective deployment requires not only low capital costs for observations but also a simultaneous reduction in labor costs. The Berkeley Environmental Air Quality and CO2 Network (BEACO2N) is a sensor network measuring O3, CO, NO, and NO2, particulate matter (PM2.5), and CO2 at dozens of locations in cities where it is deployed. Here, we describe a low labor cost in situ field calibration for the BEACO2N O3, CO, NO, and NO2 sensors. This method identifies and leverages uniform periods in concentrations across the network for calibration. The calibration achieves high accuracy and low biases with respect to temperature, humidity, and concentration, with coefficients of determination and root mean square errors of 0.88 and 3.70 ppb for O3, 0.66 and 3.16 ppb for NO2, and 0.79 and 1.58 ppb for NO. Performance of the CO sensor is 0.90 and 33.3 ppb at a site colocated with reference measurements. The method is a crucial step toward lowering operational costs of delivering accurate measurements in dense networks employing large numbers of inexpensive air quality sensors.
- 28 January 2025
- Published by American Chemical Society (ACS) in Environmental Science & Technology
- Vol. 59 (5) , 2599-2610
Open AccessA Scalable Calibration Method for Enhanced Accuracy in Dense Air Quality Monitoring Networks
Deployment of large numbers of low capital cost sensors to increase the spatial density of air quality measurements enables applications that build on mapping air at neighborhood scales. Effective deployment requires not only low capital costs for observations but also a simultaneous reduction in labor costs. The Berkeley Environmental Air Quality and CO2 Network (BEACO2N) is a sensor network measuring O3, CO, NO, and NO2, particulate matter (PM2.5), and CO2 at dozens of locations in cities where it is deployed. Here, we describe a low labor cost in situ field calibration for the BEACO2N O3, CO, NO, and NO2 sensors. This method identifies and leverages uniform periods in concentrations across the network for calibration. The calibration achieves high accuracy and low biases with respect to temperature, humidity, and concentration, with coefficients of determination and root mean square errors of 0.88 and 3.70 ppb for O3, 0.66 and 3.16 ppb for NO2, and 0.79 and 1.58 ppb for NO. Performance of the CO sensor is 0.90 and 33.3 ppb at a site colocated with reference measurements. The method is a crucial step toward lowering operational costs of delivering accurate measurements in dense networks employing large numbers of inexpensive air quality sensors.
- 10 January 2022
- Published by AIP Publishing in Chemical Physics Reviews
- Vol. 3 (1) , 011303
A compendium and meta-analysis of flatband potentials for TiO2, ZnO, and SnO2 semiconductors in aqueous media
Semiconductor/electrolyte interfaces are of great interest to numerous scientific fields including renewable energy, (photo)electrochemistry, and energy storage. The semiconductor flatband potential is a key parameter in locating the conduction band minimum or valence band maximum of the semiconductor material in electrolyte. Despite its importance for quantifying the energetic location of the semiconductor bands, literature reports for the same material demonstrate significant variability in the flatband potential. In this compendium and meta-analysis, reported flatband potentials of the common semiconductor materials TiO2, SnO2, and ZnO in aqueous electrolyte were compiled and assessed to quantify the spread in literature flatband potentials as well as determine the factors that lead to the significant spread. For TiO2, SnO2, and ZnO, literature flatband potentials referenced to the reversible hydrogen electrode span a range of nearly 2 V each. Flatband potential tabulations were separated by variables such as the solution pH, the crystalline polymorph, the crystal facet, the morphology, and the dimensions or combinations of these variables to assess the factors that contribute to the observed spread. Important and surprising findings from these categorizations are summarized: (1) Even for the narrowest categorizations, the spread in flatband potential is still large. (2) Flatband potentials of TiO2 and SnO2 follow the expected Nernstian dependence with solution pH. ZnO materials deviate from this Nernstian dependence. (3) In the aggregate, there is no statistically significant difference in the reported flatband potentials of anatase and rutile TiO2. Single crystal tabulations were the only distributions to have statistically significant differences in the flatband potential between anatase and rutile TiO2. (4) Anatase TiO2 materials with a nanotube morphology appear to have a +400 mV difference in mean flatband potential compared to all other morphologies, but we argue that this is likely due to widespread misuse of the Mott–Schottky analysis. Other interesting findings are revealed within the spread of literature flatband potentials, and possible explanations are provided to generate discussion. We also briefly review and discuss common techniques that were used to determine the flatband potential and the pitfalls/criticisms of these techniques. Last, we discuss some ways in which future research on the determination of the flatband potential can be performed to improve the reliability of reported values and the quality of the work. In total, the results from this meta-analysis suggest multiple factors can affect the measured flatband potential and that an abundance of caution should be applied when attempting to quantify the flatband potential of complex or nanostructured systems.
- 10 January 2022
- Published by AIP Publishing in Chemical Physics Reviews
- Vol. 3 (1) , 011303
A compendium and meta-analysis of flatband potentials for TiO2, ZnO, and SnO2 semiconductors in aqueous media
Semiconductor/electrolyte interfaces are of great interest to numerous scientific fields including renewable energy, (photo)electrochemistry, and energy storage. The semiconductor flatband potential is a key parameter in locating the conduction band minimum or valence band maximum of the semiconductor material in electrolyte. Despite its importance for quantifying the energetic location of the semiconductor bands, literature reports for the same material demonstrate significant variability in the flatband potential. In this compendium and meta-analysis, reported flatband potentials of the common semiconductor materials TiO2, SnO2, and ZnO in aqueous electrolyte were compiled and assessed to quantify the spread in literature flatband potentials as well as determine the factors that lead to the significant spread. For TiO2, SnO2, and ZnO, literature flatband potentials referenced to the reversible hydrogen electrode span a range of nearly 2 V each. Flatband potential tabulations were separated by variables such as the solution pH, the crystalline polymorph, the crystal facet, the morphology, and the dimensions or combinations of these variables to assess the factors that contribute to the observed spread. Important and surprising findings from these categorizations are summarized: (1) Even for the narrowest categorizations, the spread in flatband potential is still large. (2) Flatband potentials of TiO2 and SnO2 follow the expected Nernstian dependence with solution pH. ZnO materials deviate from this Nernstian dependence. (3) In the aggregate, there is no statistically significant difference in the reported flatband potentials of anatase and rutile TiO2. Single crystal tabulations were the only distributions to have statistically significant differences in the flatband potential between anatase and rutile TiO2. (4) Anatase TiO2 materials with a nanotube morphology appear to have a +400 mV difference in mean flatband potential compared to all other morphologies, but we argue that this is likely due to widespread misuse of the Mott–Schottky analysis. Other interesting findings are revealed within the spread of literature flatband potentials, and possible explanations are provided to generate discussion. We also briefly review and discuss common techniques that were used to determine the flatband potential and the pitfalls/criticisms of these techniques. Last, we discuss some ways in which future research on the determination of the flatband potential can be performed to improve the reliability of reported values and the quality of the work. In total, the results from this meta-analysis suggest multiple factors can affect the measured flatband potential and that an abundance of caution should be applied when attempting to quantify the flatband potential of complex or nanostructured systems.