AKAltynai Kupeshova

Altynai Kupeshova

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Altynai Kupeshova has a total of 20 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Geomechanical Modeling of Cement-Sheath Integrity Under Cyclic Hydraulic-Fracturing Loads: A Systematic Review, Evidence Synthesis, and Model-Selection Framework

    by Alma Murzagaliyeva, Ainagul Abdygaliyeva, Altynay Kupeshova, Bayan Khamzına, Adilzhan Kydrashov, Gulzhan Sabyrbayeva, Danabek Saduakassov, Sholpan Yergalieva, Shahin Ismailov

    Cement-sheath integrity is a critical component of long-term wellbore isolation during multistage hydraulic fracturing (MSHF), where repeated pressure and temperature changes, casing deformation, formation heterogeneity, and interfacial discontinuities generate history-dependent stress paths that can lead to plastic-strain accumulation, cracking, debonding, microannulus formation, and loss of zonal isolation. This systematic review evaluates the modeling approaches used to represent these mechanisms and develops a mechanism-based model-selection framework. Searches conducted in Scopus and the Web of Science Core Collection on 17 March 2026 identified 556 records (378 and 178, respectively). After a removal of 180 duplicates, title/abstract screening, retrieval, and full-text eligibility assessment, 95 publications were included in accordance with PRISMA guidelines. The 95 included publications were classified into seven methodological categories: general and coupled mechanics (n = 32), constitutive and damage modeling (n = 25), interface and fracture mechanics (n = 13), experimental calibration and validation (n = 13), numerical and structural modeling (n = 8), monitoring and data-informed approaches (n = 2), and analytical and semi-analytical methods (n = 2). The synthesis indicates that model suitability depends on matching the structural representation, constitutive formulation, interface treatment, and loading history to the governing integrity mechanism and available calibration and validation evidence. Three distinct but interacting assessment outcomes are identified: stabilization of plastic deformation, resistance to progressive cement and interface damage, and preservation of hydraulic isolation. A calculated shakedown condition does not, by itself, demonstrate fatigue resistance or maintained sealing. Five cross-cutting research gaps concern standardized cyclic cement characterization, reconciliation of shakedown and progressive degradation, calibration of fracture and interface models, physics-informed prediction, and monitoring-assisted model updating. A mechanism-based, minimum-sufficient-complexity framework is proposed to guide the selection of geomechanical models according to the anticipated integrity mechanism, field conditions, and available calibration and validation evidence. The framework provides conditional guidance for heterogeneous and stress-anisotropic oil and gas fields in Kazakhstan, without claiming field-specific validation or universally applicable design thresholds. The review includes direct hydraulic-fracturing evidence, mechanically transferable cyclic wellbore studies, and supporting methodological research. Owing to substantial heterogeneity in loading protocols, model assumptions, integrity outcomes, and validation approaches, the findings were synthesized qualitatively without statistical meta-analysis. A major limitation is that 239 of the 356 reports sought for full-text retrieval (67.1%) were not retrieved during the original study-selection process, introducing a substantial potential source of availability-related selection bias. The absence of documented independent duplicate screening and data extraction, together with the lack of a comprehensive study-level engineering-validity appraisal, further limits the certainty and generalizability of the qualitative synthesis. Accordingly, the proposed framework should be interpreted as an evidence-informed model-selection guide rather than an independently validated predictive tool.

  • Open Access

    Modified Bentonite Catalysts: Structure–Property Relationships, Modification Strategies, and Perspectives for Waste Valorization into Hydrogen-Rich Products

    by Ayazhan Kurmangaliyeva, Firuza Akhmetova, Zhannat Kareshova, Svetlana Yermukhanova, Altynai Kupeshova, Sapura Satayeva, Rinat Iskakov

    Natural bentonite, dominated by montmorillonite-type layered aluminosilicates, is increasingly considered as an inexpensive and environmentally acceptable support or catalyst for the thermochemical conversion of waste carbon streams. Its relevance to catalysis arises from a combination of cation-exchange capacity, swelling behavior, hierarchical porosity after modification, and the possibility of generating Brønsted, Lewis, redox and metallic active sites. This review critically evaluates bentonite modification strategies—acid activation, alkaline and sodium exchange, inorganic oxide pillaring, transition- and noble-metal impregnation, organosilane or surfactant functionalization, and carbon-based hybridization—with emphasis on their consequences for texture, acidity, thermal stability, metal dispersion and catalytic behavior. The review then connects these structure–property relationships with the emerging application of modified bentonites in plastic-waste thermocatalysis and hydrogen-rich product formation. The recent literature indicates that acid-modified bentonite can substantially improve liquid hydrocarbon formation from polyethylene, binder-free bentonite pellets can operate at kilogram-batch scale for drop-in fuels, and Ni-, Fe- or Ni–Fe-modified bentonite-type catalysts can promote tar cracking, reforming and gas upgrading. However, direct evidence for high hydrogen yields from plastic waste over bentonite remains narrower than the evidence for liquid-fuel production, biomass pyrolysis or model-compound reforming. Therefore, this article distinguishes between direct plastic-waste evidence and transferable evidence from biomass, acetic acid, tar and hydrocarbon reforming studies. The analysis identifies Ni-impregnated acid-activated or pillared bentonite, Ni–Fe/bentonite, and La/Ca-promoted Ni/bentonite as the most promising routes for plastic-derived hydrogen-rich syngas, while acid activation alone is best regarded as a pretreatment rather than a complete catalyst design. Key limitations include catalyst deactivation by coke, metal sintering, chloride poisoning from PVC, inconsistent reporting of gas yields, and insufficient life-cycle and techno-economic analysis. A roadmap is proposed for designing reproducible, scalable bentonite catalysts for circular plastic-waste valorization.


  • Open Access

    Hierarchically Porous Carbon–Diatomite Composite: Structural Development and Application in Saline Groundwater Treatment Under Real Conditions

    by Sapura Satayeva, Askar Bakushev, Svetlana Yermukhanova, Altynai Kupeshova, Nurgul Satybayeva, Aliya Urazova, Firuza Akhmetova

    This study reports the development of a hierarchically porous material based on natural diatomite, thermally treated diatomite (450 °C), and an activated carbon-modified diatomite composite for saline groundwater treatment in West Kazakhstan, addressing the need for efficient desalination solutions under real environmental conditions. The material was synthesized via sequential thermal activation at 450 °C followed by incorporation of activated carbon, with bentonite used as a binder to improve mechanical stability. Comprehensive physicochemical characterization (SEM, XRD, XRF, BET, DTA, and FTIR) confirmed significant structural and compositional transformations, including silica enrichment, removal of impurities, and the development of a well-defined hierarchical porous network. The specific surface area increased from 8 to 10 m2/g for natural diatomite to 35–40 m2/g for thermally treated diatomite and further to 55–60 m2/g for the activated carbon-modified diatomite composite, accompanied by enhanced pore volume and mesoporosity. Performance evaluation using real groundwater samples demonstrated that thermally treated diatomite (450 °C) improved removal efficiency by approximately 19%, while the activated carbon-modified diatomite composite achieved 35–37% removal of chloride, sulfate, and total dissolved solids under multi-ion competitive conditions. The enhanced adsorption performance is attributed to the synergistic effect of increased surface area, improved pore accessibility, and additional active sites introduced by activated carbon. The adsorption process is governed by ion bridging mediated by multivalent cations, pore filling within the hierarchical pore structure, and surface complexation on silanol and metal–hydroxyl functional groups. Leaching tests confirmed the structural stability of the composite and indicated no significant release of environmentally relevant elements under aqueous conditions. Compared with natural diatomite, the thermally treated and activated carbon-modified materials demonstrate improved adsorption efficiency and stable performance under realistic groundwater conditions. These results highlight their applicability for decentralized water treatment systems in regions affected by saline groundwater contamination.

  • Open Access

    ТЕХНОЛОГИЧЕСКАЯ НЕОБХОДИМОСТЬ СОВРЕМЕННОЙ ЗАКАЧКИ ГАЗА НА КАРАЧАГАНАКСКОМ МЕСТОРОЖДЕНИИ

    by Алтынай Купешева, Самал Ахмеджан, Айнагуль Абдыгалиева, Акжол Базарбаев, Рустам Мергенев

    АННОТАЦИЯ Газодобывающая отрасль Казахстана отличается высокой степенью концентрации: в 2010 году более 76% добычи поступило из Карачаганака (свободный газ) и моря (попутный газ). Общее производство быстро росло и за 10 лет выросло в три раза, до 37,4 млрд м3. Динамика добычи газа определяется темпами добычи нефти и технологическими решениями по разработке месторождения, в частности, по обратной закачке попутного газа в пласт В статье говорится, что компания "Карачаганак Петролиум Оперейтинг Б. В." (КПО Б. В.) В результате реализации проекта снятия производственных ограничений по газу на Карачаганакском добычном комплексе и расширения мощностей по газопереработке ожидается увеличение объемов обратной закачки газа. Закачка отработанного газа в слой с сушкой и очисткой-решает задачи по обезвреживанию кислого газа, поддержанию местной экологии, поддержанию пластового давления выше давления конденсации. Сушка газа от влаги показана в гликолевом абсорбере и технология восстановления абсорбера. Обратная закачка газа на Карачаганакском месторождении осуществляется на установке комплексной подготовки газа (ГКДС) - 2. В этой установке в зависимости от величины прироста объема закачиваемого газа показана необходимость включения дополнительного 4-го компрессора.