Christoph Trinkl
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Christoph Trinkl has a total of 32 co-authors. Here are the top co-authors by number of shared publications:
- Mathias Ehrenwirth
Institute of new Energy Systems, Technische Hochschule Ingolstadt, 85049 Ingolstadt, Germany
7 shared publications - Thorsten Summ
Technische Hochschule Ingolstadt
5 shared publications - Wilfried Zörner
Technische Hochschule Ingolstadt, Institute of new Energy Systems, Research Field Industrial Energy Systems, Esplanade 10, 85049 Ingolstadt, Germany
5 shared publications Wilfried Zörner
Technische Hochschule Ingolstadt image/svg+xml
4 shared publications- David Schmitt
Technische Hochschule Ingolstadt
3 shared publications - Kedar Mehta
Technische Hochschule Ingolstadt
3 shared publications
Latest Publications
- Open Access
- 17 April 2026
- Published by TIB Open Publishing in International Sustainable Energy Conference - Proceedings
- Vol. 2
The Potential of Agri-Solar Thermal Systems for Dual Land use Combining Agriculture and Large-Scale Solar Heat Generation
In view of the restricted availability of land for large-scale solar thermal systems in district heating, the creation of synergies in combining agricultural and energetic land use is of particular interest. Hence, the paper provides an overview and a qualitative evaluation of the conceptual options for Agri-Solar Thermal systems. Besides that, it outlines the requirements, boundary conditions and further development needs for these systems. The investigation reveals that vertical Agri-Solar Thermal with insulating glass flat-plate collectors is a promising concept due to the collectors' bifaciality and low adaptation efforts. Consequently, its solar yield potential was analysed in more detail, applying an analytical modelling approach. It was found that a vertical bifacial Agri-Solar Thermal system is capable to deliver a similar specific solar collector yield (470 kWh/(m²a)) compared to that of a conventional ground-mounted solar thermal system (494 kWh/(m²a)) for a Central European reference location (Würzburg, Germany), while reducing land use for collector mounting to less than one third (30.7 %). Hence, a vertical bifacial Agri-ST system could provide around three times more heat per square metre of occupied land than a conventional setup (1,023 kWh/(m²a) vs. 330 kWh/(m²a)), highlighting the concept’s potential to enhance land use efficiency.
- 17 April 2026
- Published by TIB Open Publishing in International Sustainable Energy Conference - Proceedings
- Vol. 2
Open AccessThe Potential of Agri-Solar Thermal Systems for Dual Land use Combining Agriculture and Large-Scale Solar Heat Generation
In view of the restricted availability of land for large-scale solar thermal systems in district heating, the creation of synergies in combining agricultural and energetic land use is of particular interest. Hence, the paper provides an overview and a qualitative evaluation of the conceptual options for Agri-Solar Thermal systems. Besides that, it outlines the requirements, boundary conditions and further development needs for these systems. The investigation reveals that vertical Agri-Solar Thermal with insulating glass flat-plate collectors is a promising concept due to the collectors' bifaciality and low adaptation efforts. Consequently, its solar yield potential was analysed in more detail, applying an analytical modelling approach. It was found that a vertical bifacial Agri-Solar Thermal system is capable to deliver a similar specific solar collector yield (470 kWh/(m²a)) compared to that of a conventional ground-mounted solar thermal system (494 kWh/(m²a)) for a Central European reference location (Würzburg, Germany), while reducing land use for collector mounting to less than one third (30.7 %). Hence, a vertical bifacial Agri-ST system could provide around three times more heat per square metre of occupied land than a conventional setup (1,023 kWh/(m²a) vs. 330 kWh/(m²a)), highlighting the concept’s potential to enhance land use efficiency.
- Open Access
- 10 April 2026
- Published by Elsevier in SSRN Electronic Journal
Optimal Integration of Seasonal Thermal Energy Storage in a Thermal Source Network
Thermal Source Networks (TSNs) are a key element of future district energy systems, because they enable the integration of locally available diverse renewable and waste-heat sources. Seasonal thermal energy storage (sTES) can enhance TSN flexibility by enabling inter-seasonal energy shifting and mitigating mismatches between supply and demand. This study investigates the optimal integration of a retrofit sTES into a TSN, using the incampus industrial park in Ingolstadt, Germany, as a case study. A dynamic simulation framework is developed by coupling a MATLAB/Simscape TSN model with a physics-based sTES model developed in Modelica/Dymola and exported as Functional Mock-up Unit. A parametric assessment is performed by varying key sTES design parameters (e.g., insulation) and demand characteristics (e.g., demand simultaneity). Performance is evaluated using three indicators: sTES efficiency, heating and cooling demand coverage, and levelized cost of thermal service (LCOTS). Results show that improved insulation and compact geometry increase storage efficiency by 21% and reduce LCOTS by 13%, whereas increasing sTES volume can increase LCOTS by 40%. A heat pump-assisted charging option extends the sTES usable temperature range and increases demand coverage by 16% without substantially increasing thermal losses. In contrast, higher demand simultaneity between heating and cooling reduces sTES utilization and leads to a pronounced increase in LCOTS by 125%. Overall, the analysis identifies a near-Pareto-optimal configuration that balances efficiency, coverage, and cost, and provides practical guidelines for integrating seasonal storage in next-generation low-temperature thermal networks.
- 10 April 2026
- Published by Elsevier in SSRN Electronic Journal
Open AccessOptimal Integration of Seasonal Thermal Energy Storage in a Thermal Source Network
Thermal Source Networks (TSNs) are a key element of future district energy systems, because they enable the integration of locally available diverse renewable and waste-heat sources. Seasonal thermal energy storage (sTES) can enhance TSN flexibility by enabling inter-seasonal energy shifting and mitigating mismatches between supply and demand. This study investigates the optimal integration of a retrofit sTES into a TSN, using the incampus industrial park in Ingolstadt, Germany, as a case study. A dynamic simulation framework is developed by coupling a MATLAB/Simscape TSN model with a physics-based sTES model developed in Modelica/Dymola and exported as Functional Mock-up Unit. A parametric assessment is performed by varying key sTES design parameters (e.g., insulation) and demand characteristics (e.g., demand simultaneity). Performance is evaluated using three indicators: sTES efficiency, heating and cooling demand coverage, and levelized cost of thermal service (LCOTS). Results show that improved insulation and compact geometry increase storage efficiency by 21% and reduce LCOTS by 13%, whereas increasing sTES volume can increase LCOTS by 40%. A heat pump-assisted charging option extends the sTES usable temperature range and increases demand coverage by 16% without substantially increasing thermal losses. In contrast, higher demand simultaneity between heating and cooling reduces sTES utilization and leads to a pronounced increase in LCOTS by 125%. Overall, the analysis identifies a near-Pareto-optimal configuration that balances efficiency, coverage, and cost, and provides practical guidelines for integrating seasonal storage in next-generation low-temperature thermal networks.
- Open Access
PV-Optimized Heat Pump Control in Multi-Family Buildings Using a Reinforcement Learning Approach
For the energy transition in the residential sector, heat pumps are a core technology for decarbonizing thermal energy production for space heating and domestic hot water. Electricity generation from on-site photovoltaic (PV) systems can also contribute to a carbon-neutral building stock. However, both will increase the stress on the electricity grid. This can be reduced by using appropriate control strategies to match electricity consumption and production. In recent years, artificial intelligence-based approaches such as reinforcement learning (RL) have become increasingly popular for energy-system management. However, the literature shows a lack of investigation of RL-based controllers for multi-family building energy systems, including an air source heat pump, thermal storage, and a PV system, although this is a common system configuration. Therefore, in this study, a model of such an energy system and RL-based controllers were developed and simulated with physical models and compared with conventional rule-based approaches. Four RL algorithms were investigated for two objectives, and finally, the soft actor–critic algorithm was selected for the annual simulations. The first objective, to maintain only the required temperatures in the thermal storage, could be achieved by the developed RL agent. However, the second objective, to additionally improve the PV self-consumption, was better achieved by the rule-based controller. Therefore, further research on the reward function, hyperparameters, and advanced methods, including long short-term memory layers, as well as a training for longer time periods than six days are suggested.
Open AccessPV-Optimized Heat Pump Control in Multi-Family Buildings Using a Reinforcement Learning Approach
For the energy transition in the residential sector, heat pumps are a core technology for decarbonizing thermal energy production for space heating and domestic hot water. Electricity generation from on-site photovoltaic (PV) systems can also contribute to a carbon-neutral building stock. However, both will increase the stress on the electricity grid. This can be reduced by using appropriate control strategies to match electricity consumption and production. In recent years, artificial intelligence-based approaches such as reinforcement learning (RL) have become increasingly popular for energy-system management. However, the literature shows a lack of investigation of RL-based controllers for multi-family building energy systems, including an air source heat pump, thermal storage, and a PV system, although this is a common system configuration. Therefore, in this study, a model of such an energy system and RL-based controllers were developed and simulated with physical models and compared with conventional rule-based approaches. Four RL algorithms were investigated for two objectives, and finally, the soft actor–critic algorithm was selected for the annual simulations. The first objective, to maintain only the required temperatures in the thermal storage, could be achieved by the developed RL agent. However, the second objective, to additionally improve the PV self-consumption, was better achieved by the rule-based controller. Therefore, further research on the reward function, hyperparameters, and advanced methods, including long short-term memory layers, as well as a training for longer time periods than six days are suggested.
- Open Access
- 13 December 2023
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 61
Statistical analysis of solar thermal collectors in the Solar Keymark Database
- 13 December 2023
- Published by Elsevier in Sustainable Energy Technologies and Assessments
- Vol. 61
Open AccessStatistical analysis of solar thermal collectors in the Solar Keymark Database
- Open Access
- 2 May 2023
- Published by Elsevier in Applied Thermal Engineering
- Vol. 230
Effect of argon concentration on thermal efficiency of gas-filled insulating glass flat-plate collectors
- 2 May 2023
- Published by Elsevier in Applied Thermal Engineering
- Vol. 230
Open AccessEffect of argon concentration on thermal efficiency of gas-filled insulating glass flat-plate collectors
- Open Access
Assessment of Conservation Voltage Reduction in Distribution Networks with Voltage Regulating Distribution Transformers
The application of voltage reduction in medium and low voltage grids to reduce peak power demand or energy consumption has been implemented since the 1980s using several approaches. Conservation Voltage Reduction (CVR), as one such approach, uses a voltage control device to reduce or increase the voltage setpoint on a busbar, thereby reducing or increasing the amount of active and reactive power supply in the network. Voltage regulation for CVR is always implemented according to established network planning standards in each country. Research in this field has proven that a CVR factor () of 0.7–1.5 for peak demand reduction can be achieved. This is an evaluation metric of CVR. The aim of this research is to determine and validate for peak demand reduction by comparing actual results obtained during regular tap changes with other randomly distributed periods outside tap change operations, using a set of measurement data. It is important to understand CVR deployment capability by evaluating CVR potentials from historical random tap operations before a robust network-wide deployment is introduced. This research provides such guidance. It also provides a novel approach to determining tap changes from voltage measurements using a time-based algorithm. A ranging from 0.95 to 1.61 was estimated using a measurement dataset from a test field. The result of the entire evaluation shows that the are smaller during peak PV production and greater during peak demand periods. Further evaluation using statistical hypotheses testing and a control chart was used to validate the evaluation.Open AccessAssessment of Conservation Voltage Reduction in Distribution Networks with Voltage Regulating Distribution Transformers
The application of voltage reduction in medium and low voltage grids to reduce peak power demand or energy consumption has been implemented since the 1980s using several approaches. Conservation Voltage Reduction (CVR), as one such approach, uses a voltage control device to reduce or increase the voltage setpoint on a busbar, thereby reducing or increasing the amount of active and reactive power supply in the network. Voltage regulation for CVR is always implemented according to established network planning standards in each country. Research in this field has proven that a CVR factor () of 0.7–1.5 for peak demand reduction can be achieved. This is an evaluation metric of CVR. The aim of this research is to determine and validate for peak demand reduction by comparing actual results obtained during regular tap changes with other randomly distributed periods outside tap change operations, using a set of measurement data. It is important to understand CVR deployment capability by evaluating CVR potentials from historical random tap operations before a robust network-wide deployment is introduced. This research provides such guidance. It also provides a novel approach to determining tap changes from voltage measurements using a time-based algorithm. A ranging from 0.95 to 1.61 was estimated using a measurement dataset from a test field. The result of the entire evaluation shows that the are smaller during peak PV production and greater during peak demand periods. Further evaluation using statistical hypotheses testing and a control chart was used to validate the evaluation. - Open Access
Sector Coupling Potential of a District Heating Network by Consideration of Residual Load and CO2 Emissions
The growing share of fluctuating renewable electricity production within the German energy system causes the increasing necessity for flexible consumers, producers, and storage technologies to balance supply and demand. District heating networks with combined heat and power units, Power-to-Heat applications, and thermal energy storage capacities can serve as one of these flexible options. In this context, a simulation model of the district heating network of the rural community Dollnstein, Germany, was built. With the residual load of different regional areas (Germany, Bavaria, Eichstätt, Dollnstein) it is investigated, how the heat generators can operate in an electricity market beneficial way. Two different control algorithms were evaluated: Due to a correlation between the residual loads and the CO2 emissions of the electricity mix, the CO2 savings achieved by this control algorithm are determined. Another way to operate electricity market beneficial is to consider the current CO2 emissions of each region. The main outcomes of this paper are, that there is a high potential for sector coupling by shifting the operation times of a CHP and a heat pump according to the residual load. The electricity demand of the heat pump can be met in terms of low CO2 emissions of the electricity mix, while the CHP can replace electricity with high CO2 emissions. These results can be improved, by considering not the residual load but the current CO2 emissions in the control algorithm.
Open AccessSector Coupling Potential of a District Heating Network by Consideration of Residual Load and CO2 Emissions
The growing share of fluctuating renewable electricity production within the German energy system causes the increasing necessity for flexible consumers, producers, and storage technologies to balance supply and demand. District heating networks with combined heat and power units, Power-to-Heat applications, and thermal energy storage capacities can serve as one of these flexible options. In this context, a simulation model of the district heating network of the rural community Dollnstein, Germany, was built. With the residual load of different regional areas (Germany, Bavaria, Eichstätt, Dollnstein) it is investigated, how the heat generators can operate in an electricity market beneficial way. Two different control algorithms were evaluated: Due to a correlation between the residual loads and the CO2 emissions of the electricity mix, the CO2 savings achieved by this control algorithm are determined. Another way to operate electricity market beneficial is to consider the current CO2 emissions of each region. The main outcomes of this paper are, that there is a high potential for sector coupling by shifting the operation times of a CHP and a heat pump according to the residual load. The electricity demand of the heat pump can be met in terms of low CO2 emissions of the electricity mix, while the CHP can replace electricity with high CO2 emissions. These results can be improved, by considering not the residual load but the current CO2 emissions in the control algorithm.
- Open Access
Mapping Potential for Improving Rural Energy Services in Kyrgyzstan: Factors for Achieving Sustainable Development Goals in the Community Context
Energy is a pivotal element for overall development. Therefore, affordable and clean energy for all (Sustainable Development Goal 7) is one of the important elements. Despite a suitable approach, Kyrgyzstan lags behind to achieve its Sustainable Development Goals by 2030. Improving access to energy can significantly impact the progress of many other sustainable development targets. However, access to reliable, sustainable, and adequate energy is a crucial task in rural Kyrgyzstan. Taking into consideration the energy situation and the importance of the availability of energy services, the overarching aim of the presented article is to map the potential of improving rural energy services to foster overall sustainable development goals. The article presents the most relevant information about rural energy usage behaviour based on three primary pillars: energy demand, energy carrier, and energy sources. In addition, the presented research article synthesises the key driving factors which have a direct or indirect impact on the energy services in rural areas. The summarised data displays a deep insight into a variety of complex and dynamic household energy consumption patterns. The article provides a potential solution nexus to foster improved energy services in rural Kyrgyzstan and therefore to foster the overall sustainable development in Kyrgyzstan. The findings of the article help to formulate a strategy to design rural energy services for policy makers and stockholders.
Open AccessMapping Potential for Improving Rural Energy Services in Kyrgyzstan: Factors for Achieving Sustainable Development Goals in the Community Context
Energy is a pivotal element for overall development. Therefore, affordable and clean energy for all (Sustainable Development Goal 7) is one of the important elements. Despite a suitable approach, Kyrgyzstan lags behind to achieve its Sustainable Development Goals by 2030. Improving access to energy can significantly impact the progress of many other sustainable development targets. However, access to reliable, sustainable, and adequate energy is a crucial task in rural Kyrgyzstan. Taking into consideration the energy situation and the importance of the availability of energy services, the overarching aim of the presented article is to map the potential of improving rural energy services to foster overall sustainable development goals. The article presents the most relevant information about rural energy usage behaviour based on three primary pillars: energy demand, energy carrier, and energy sources. In addition, the presented research article synthesises the key driving factors which have a direct or indirect impact on the energy services in rural areas. The summarised data displays a deep insight into a variety of complex and dynamic household energy consumption patterns. The article provides a potential solution nexus to foster improved energy services in rural Kyrgyzstan and therefore to foster the overall sustainable development in Kyrgyzstan. The findings of the article help to formulate a strategy to design rural energy services for policy makers and stockholders.
- Open Access
Towards Sustainable Community Development through Renewable Energies in Kyrgyzstan: A Detailed Assessment and Outlook
In rural Kyrgyzstan, the energy need is usually derived from multiple natural energy resources such as firewood, charcoal, agricultural residues, animal dung, and wood branches, which are considered common and predominant practices. Because of the non-sustainable resources and heavy reliance on the environment, Kyrgyzstan is one of the most vulnerable countries to climate change in Central Asia. On the contrary, the great renewable energy potential in Kyrgyzstan is untapped, which could be the most promising solution to ensuring sustainable energy supply in the country. However, because of the lack of scientific knowledge, current energy policies, and the lack of infrastructure, renewable resources are mainly untapped. To exploit the country’s renewable energy potential, there is a need for a systematic diagnosis to develop a strategy to explore renewables in Kyrgyzstan, which is currently missing in the existing literature. In that regard, the presented study aims to assess the current status of renewable energy sources by considering the local energy context from a potential point of view. Further to this, it provides a comparative overview through a matrix of strengths, weaknesses, opportunities, and threats. Such novel analysis would be the fundamental base for formulating policy advice and a national plan to enhance the utilization of renewable energy in Kyrgyzstan. The presented analysis was carried out based on the extensive literature review, the country’s national plan, and the existing energy policies of Kyrgyzstan. The article found out that there is huge potential available for the renewable energy market. As compared to other renewable energy sources, solar energy has great potential and can be considered one of the pioneer sustainable sources for integration into the country’s power generation framework.
Open AccessTowards Sustainable Community Development through Renewable Energies in Kyrgyzstan: A Detailed Assessment and Outlook
In rural Kyrgyzstan, the energy need is usually derived from multiple natural energy resources such as firewood, charcoal, agricultural residues, animal dung, and wood branches, which are considered common and predominant practices. Because of the non-sustainable resources and heavy reliance on the environment, Kyrgyzstan is one of the most vulnerable countries to climate change in Central Asia. On the contrary, the great renewable energy potential in Kyrgyzstan is untapped, which could be the most promising solution to ensuring sustainable energy supply in the country. However, because of the lack of scientific knowledge, current energy policies, and the lack of infrastructure, renewable resources are mainly untapped. To exploit the country’s renewable energy potential, there is a need for a systematic diagnosis to develop a strategy to explore renewables in Kyrgyzstan, which is currently missing in the existing literature. In that regard, the presented study aims to assess the current status of renewable energy sources by considering the local energy context from a potential point of view. Further to this, it provides a comparative overview through a matrix of strengths, weaknesses, opportunities, and threats. Such novel analysis would be the fundamental base for formulating policy advice and a national plan to enhance the utilization of renewable energy in Kyrgyzstan. The presented analysis was carried out based on the extensive literature review, the country’s national plan, and the existing energy policies of Kyrgyzstan. The article found out that there is huge potential available for the renewable energy market. As compared to other renewable energy sources, solar energy has great potential and can be considered one of the pioneer sustainable sources for integration into the country’s power generation framework.
- Open Access
Electric Two-Wheeler Vehicle Integration into Rural Off-Grid Photovoltaic System in Kenya
In both rural and urban areas, two-wheeler vehicles are the most common means of transportation, contributing to local air pollution and greenhouse gas emissions (GHG). Transitioning to electric two-wheeler vehicles can help reduce GHG emissions while also increasing the socioeconomic status of people in rural Kenya. Renewable energy systems can play a significant role in charging electric two-wheeled vehicles, resulting in lower carbon emissions and increased renewable energy penetration in rural Kenya. As a result, using the Conventional and Renewable Energy Optimization (CARNOT) Toolbox in the MATLAB/Simulink environment, this paper focuses on integrating and modeling electric two-wheeled vehicles (e-bikes) into an off-grid photovoltaic Water-Energy Hub located in the Lake Victoria Region of Western Kenya. Electricity demand data obtained from the Water-Energy Hub was investigated and analyzed. Potential solar energy surplus was identified and the surplus was used to incorporate the electric two-wheeler vehicles. The energy consumption of the electric two-wheeler vehicles was also measured in the field based on the rider’s driving behavior. The modeling results revealed an annual power consumption of 27,267 kWh, a photovoltaic (PV) electricity production of 37,785 kWh, and an electricity deficit of 370 kWh. The annual results show that PV generation exceeds power consumption, implying that there should be no electricity deficit. The results, however, do not represent the results in hourly resolution, ignoring the impact of weather fluctuation on PV production. As a result, in order to comprehend the electricity deficit, hourly resolution results are shown. A load optimization method was designed to efficiently integrate the electric 2-wheeler vehicle into the Water-Energy Hub in order to alleviate the electricity deficit. The yearly electricity deficit was decreased to 1 kWh and the annual electricity consumption was raised by 11% (i.e., 30,767 kWh), which is enough to charge four more electric two-wheeler batteries daily using the load optimization technique.
Open AccessElectric Two-Wheeler Vehicle Integration into Rural Off-Grid Photovoltaic System in Kenya
In both rural and urban areas, two-wheeler vehicles are the most common means of transportation, contributing to local air pollution and greenhouse gas emissions (GHG). Transitioning to electric two-wheeler vehicles can help reduce GHG emissions while also increasing the socioeconomic status of people in rural Kenya. Renewable energy systems can play a significant role in charging electric two-wheeled vehicles, resulting in lower carbon emissions and increased renewable energy penetration in rural Kenya. As a result, using the Conventional and Renewable Energy Optimization (CARNOT) Toolbox in the MATLAB/Simulink environment, this paper focuses on integrating and modeling electric two-wheeled vehicles (e-bikes) into an off-grid photovoltaic Water-Energy Hub located in the Lake Victoria Region of Western Kenya. Electricity demand data obtained from the Water-Energy Hub was investigated and analyzed. Potential solar energy surplus was identified and the surplus was used to incorporate the electric two-wheeler vehicles. The energy consumption of the electric two-wheeler vehicles was also measured in the field based on the rider’s driving behavior. The modeling results revealed an annual power consumption of 27,267 kWh, a photovoltaic (PV) electricity production of 37,785 kWh, and an electricity deficit of 370 kWh. The annual results show that PV generation exceeds power consumption, implying that there should be no electricity deficit. The results, however, do not represent the results in hourly resolution, ignoring the impact of weather fluctuation on PV production. As a result, in order to comprehend the electricity deficit, hourly resolution results are shown. A load optimization method was designed to efficiently integrate the electric 2-wheeler vehicle into the Water-Energy Hub in order to alleviate the electricity deficit. The yearly electricity deficit was decreased to 1 kWh and the annual electricity consumption was raised by 11% (i.e., 30,767 kWh), which is enough to charge four more electric two-wheeler batteries daily using the load optimization technique.