Rasmus Eilkœr Hansen

Mid‐infrared (IR) supercontinuum (SC) lasers are important in applications such as pollution detection, stand‐off detection, and non‐destructive testing. The performance in many applications is limited by the noise level of the supercontinuum laser. High noise typically results in low sensitivities or a need for long integration times. In this paper, a simple technique to reduce the noise of high noise soliton‐based SC sources is introduced by adding a short piece of normal dispersion fiber to force the spectrally distributed solitons to spectrally broaden through self‐phase modulation and thereby overlap to average out the noise. The noise reduction is demonstrated experimentally and numerically using a ZBLAN fiber based mid‐IR SC source and adding a short piece of highly nonlinear arsenic‐sulfide fiber. However, the method is generally applicable to any soliton‐based near‐IR or mid‐IR SC source. Its efficiency is underlined by experimentally comparing it to SC generation in fibers in which a second zero‐dispersion wavelength provides the spectral alignment noise reduction mechanism.

We numerically investigate high-power, modulational instability-based supercontinuum sources. Such sources have spectra that reach the infrared material absorption edge and as a result the spectrum has a strong narrow blue peak (dispersive wave group velocity matched to solitons at the infrared loss edge) followed by a significant dip in the neighboring longer-wavelength region. In a wide range of applications one prefers a broader and more flat blue part within a certain minimum and maximum power spectral density. From the perspective of fiber degradation it would be desirable to achieve this at reduced pump peak powers. We show that it is possible to improve the flatness by more than a factor of 3 by modulating the input peak power, although this comes at the expense of slightly higher relative intensity noise. Specifically, we consider a standard 6.6 W, 80 MHz supercontinuum source with a 455 nm blue edge, which uses 7 ps pump pulses. We then modulate its peak power to generate a pump pulse train having two and three different sub-pulses.

In industrial paper production, online monitoring of a range of quality parameters is essential for ensuring that the performance and appearance of the final product is suitable for a given application. In this article, two optical sensing techniques are investigated for non-destructive, non-contact characterization of paper thickness, surface roughness, and production defects. The first technique is optical coherence tomography based on a mid-infrared supercontinuum laser, which can cover thicknesses from ~20–90 μm and provide information about the surface finish. Detection of subsurface voids, cuts, and oil contamination was also demonstrated. The second technique is terahertz time domain spectroscopy, which is used to measure paper thicknesses of up to 443 μm. A proof-of-concept thickness measurement in freely suspended paper was also demonstrated. These demonstrations highlight the added functionality and potential of tomographic optical sensing methods towards industrial non-contact quality monitoring.

We report on mid-infrared optical coherence tomography (OCT) at 4 µm based on collinear sum-frequency upconversion and promote the A-scan scan rate to 3 kHz. We demonstrate the increased imaging speed for two spectral realizations, one providing an axial resolution of 8.6 µm, and one providing a record axial resolution of 5.8 µm. Image performance is evaluated by sub-surface micro-mapping of a plastic glove and real-time monitoring of C O 2 in parallel with OCT imaging.

Numerical modeling of cascaded mid-infrared (IR) supercontinuum generation (SCG) is used to study how an ensemble of spectrally and temporally distributed solitons from the long-wavelength part of an SC evolves when coupled into the normal dispersion regime of a highly nonlinear chalcogenide fiber. This has revealed a novel phenomenon—the generation of a high-energy rogue wave in the normal dispersion regime in the form of a strong self-phase-modulation (SPM) chirped pulse. This SPM rogue wave is generated by swallowing the energy of many sufficiently closely spaced pulses through inter-pulse Raman amplification and is a key effect behind efficient cascaded mid-IR SCG.

A hybrid optical fiber comprising metal electrodes, high performance polymers, and a highly nonlinear glass core is presented in this work as a novel, to the best of our knowledge, platform for mid-infrared nonlinear devices. The fiber allows for electrical tuning of the temperature by joule heating using a set of embedded tungsten wires. Unlike temperature tuning by an external heater, this results in a strong modulation, which introduces alternating signs of its dispersion. Enhanced spectral broadening through supercontinuum generation in the mid-infrared due to this modulation is investigated numerically.