Alexander Arriola
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
Alexander Arriola has a total of 37 co-authors. Here are the top co-authors by number of shared publications:
- Simon Gross
Macquarie University
7 shared publications - Michael J. Withford
Macquarie University
6 shared publications - Barnaby Norris
The University of Sydney
5 shared publications - Peter Tuthill
University of Sydney, Sydney Institute for Astronomy, School of Physics, Sydney, New South Wales, Australia
5 shared publications - Nemanja Jovanovic
California Institute of Technology
4 shared publications - Thomas Gretzinger
Macquarie University
4 shared publications
Latest Publications
- Open Access
- 1 October 2023
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 9 (04) , 048005-17
Machine-learning approach for optimal self-calibration and fringe tracking in photonic nulling interferometry
Nulling interferometry is a key technology in the quest to directly image high-contrast objects at angular resolutions at and higher than the telescope diffraction limit, such as the case of directly imaging exoplanets in the habitable zone. As with conventional interferometry, light from separate telescopes or sub-apertures is coherently combined, and the visibility and phase of the resulting fringes is used to determine the source intensity map of the target. But in nulling interferometry, differential phase delays are carefully tuned such that the central star is subject to maximal destructive interference, removing its otherwise overwhelming photon noise and allowing the faint, off-axis science object’s light to be detected.
- 1 October 2023
- Published by SPIE-Intl Soc Optical Eng in Journal of Astronomical Telescopes, Instruments, and Systems
- Vol. 9 (04) , 048005-17
Open AccessMachine-learning approach for optimal self-calibration and fringe tracking in photonic nulling interferometry
Nulling interferometry is a key technology in the quest to directly image high-contrast objects at angular resolutions at and higher than the telescope diffraction limit, such as the case of directly imaging exoplanets in the habitable zone. As with conventional interferometry, light from separate telescopes or sub-apertures is coherently combined, and the visibility and phase of the resulting fringes is used to determine the source intensity map of the target. But in nulling interferometry, differential phase delays are carefully tuned such that the central star is subject to maximal destructive interference, removing its otherwise overwhelming photon noise and allowing the faint, off-axis science object’s light to be detected.
- Open Access
- 1 December 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (12) , 121109
High performing designer glass platform to host versatile photonic devices
The aluminum to alkaline earth ratio (Al:[AE]) in borosilicate glass is introduced as a novel compositional parameter to produce high index waveguides through femtosecond laser inscription. Alkaline earths are considered to be major refractive index providers for laser written optical waveguides due to their collective migration toward the guiding region. Contrary to the existing belief that increasing the concentration of such index providers within a glass composition will help to produce high index change waveguides, we demonstrate that high index waveguides can be fabricated by tuning the Al:[AE] ratio while keeping the absolute concentration of the index provider to a minimum.
- 1 December 2021
- Published by AIP Publishing in APL Materials
- Vol. 9 (12) , 121109
Open AccessHigh performing designer glass platform to host versatile photonic devices
The aluminum to alkaline earth ratio (Al:[AE]) in borosilicate glass is introduced as a novel compositional parameter to produce high index waveguides through femtosecond laser inscription. Alkaline earths are considered to be major refractive index providers for laser written optical waveguides due to their collective migration toward the guiding region. Contrary to the existing belief that increasing the concentration of such index providers within a glass composition will help to produce high index change waveguides, we demonstrate that high index waveguides can be fabricated by tuning the Al:[AE] ratio while keeping the absolute concentration of the index provider to a minimum.
- Open Access
- 1 September 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11823, 118230C-11
Very high resolution spectro-interferometry with wavefront sensing capabilities on Subaru/SCExAO using photonics
Post Extreme Adaptive-Optics (ExAO) spectro-interferometers design allows high contrast imaging with an inner working angle down to half the theoretical angular resolution of the telescope. This regime, out of reach for conventional ExAO imaging systems, is obtained thanks to the interferometric recombination of multiple sub-apertures of a single telescope, using single mode waveguides to remove speckle noise. The SCExAO platform at the Subaru telescope hosts two instruments with such design, coupled with a spectrograph. The FIRST instrument operates in the Visible (600-800nm, R~400) and is based on pupil remapping using single-mode fibers. The GLINT instrument works in the NIR (1450-1650nm, R~160) and is based on nulling interferometry. We present here how these photonic instruments have the unique capability to simultaneously do high contrast imaging and be included in the wavefront sensing architecture of SCExAO.
- 1 September 2021
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11823, 118230C-11
Open AccessVery high resolution spectro-interferometry with wavefront sensing capabilities on Subaru/SCExAO using photonics
Post Extreme Adaptive-Optics (ExAO) spectro-interferometers design allows high contrast imaging with an inner working angle down to half the theoretical angular resolution of the telescope. This regime, out of reach for conventional ExAO imaging systems, is obtained thanks to the interferometric recombination of multiple sub-apertures of a single telescope, using single mode waveguides to remove speckle noise. The SCExAO platform at the Subaru telescope hosts two instruments with such design, coupled with a spectrograph. The FIRST instrument operates in the Visible (600-800nm, R~400) and is based on pupil remapping using single-mode fibers. The GLINT instrument works in the NIR (1450-1650nm, R~160) and is based on nulling interferometry. We present here how these photonic instruments have the unique capability to simultaneously do high contrast imaging and be included in the wavefront sensing architecture of SCExAO.
- Open Access
- 3 May 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (19) , D33-D42
Building hybridized 28-baseline pupil-remapping photonic interferometers for future high-resolution imaging
One key advantage of single-mode photonic technologies for interferometric use is their ability to easily scale to an ever-increasing number of inputs without a major increase in the overall device size, compared to traditional bulk optics. This is particularly important for the upcoming extremely large telescope (ELT) generation of telescopes currently under construction. We demonstrate the fabrication and characterization of a hybridized photonic interferometer, with eight simultaneous inputs, forming 28 baselines, which is the largest amount to date, to the best of our knowledge. Using different photonic fabrication technologies, we combine a 3D pupil remapper with a planar eight-port ABCD pairwise beam combiner, along with the injection optics necessary for telescope use, into a single integrated monolithic device. We successfully realized a combined device called Dragonfly, which demonstrates a raw instrumental closure-phase stability down to 0.9° over 8 π phase piston error, relating to a detection contrast of ∼ 6.5 × 10 − 4 on an adaptive-optics-corrected 8 m telescope. This prototype successfully demonstrates advanced hybridization and packaging techniques necessary for on-sky use for high-contrast detection at small inner working angles, ideally complementing what can currently be achieved using coronagraphs.
- 3 May 2021
- Published by Optica Publishing Group in Applied Optics
- Vol. 60 (19) , D33-D42
Open AccessBuilding hybridized 28-baseline pupil-remapping photonic interferometers for future high-resolution imaging
One key advantage of single-mode photonic technologies for interferometric use is their ability to easily scale to an ever-increasing number of inputs without a major increase in the overall device size, compared to traditional bulk optics. This is particularly important for the upcoming extremely large telescope (ELT) generation of telescopes currently under construction. We demonstrate the fabrication and characterization of a hybridized photonic interferometer, with eight simultaneous inputs, forming 28 baselines, which is the largest amount to date, to the best of our knowledge. Using different photonic fabrication technologies, we combine a 3D pupil remapper with a planar eight-port ABCD pairwise beam combiner, along with the injection optics necessary for telescope use, into a single integrated monolithic device. We successfully realized a combined device called Dragonfly, which demonstrates a raw instrumental closure-phase stability down to 0.9° over 8 π phase piston error, relating to a detection contrast of ∼ 6.5 × 10 − 4 on an adaptive-optics-corrected 8 m telescope. This prototype successfully demonstrates advanced hybridization and packaging techniques necessary for on-sky use for high-contrast detection at small inner working angles, ideally complementing what can currently be achieved using coronagraphs.
- 3 January 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11203, 26
Imaging exoplanets with nulling interferometry using integrated-photonics: the GLINT project
As confirmed exoplanets climb into the thousands, the era of exoplanets discovery is giving way to exoplanet characterization. The most desirable scenario is one where the exoplanet can be directly imaged. Direct imaging not only delivers orbital parameters, but also yields the chemical composition of the atmosphere. The potential for habitable zone exoplanets to exhibit biosignatures in such data from a visionary future instrument drives intense interest. However, this requires to simultaneously reach extremely high star-to-planet contrast (from 104 to 108) and extremely high angular resolution (around and below the diffraction limit). Accomplishing all this through the atmosphere blurred by turbulence remains a critical challenge, yet it is one that nulling interferometry in combination with extreme adaptive optics aims to meet. This technique overcomes the contrast problem by removing the starlight with destructive interference, permitting the faint light coming from the planet to remain. In this paper, we present the latest evolution of nulling interferometry instrumentation: the integrated- photonic nuller. It allows spatial filtering, multiple simultaneous baselines, simultaneous photometric channels and simultaneous measurement of the "nulled" signal (the light emitted from the planet after cancelling the starlight) as well as the "anti-nulled" signal (the channel containing the redirected starlight). Exploiting these fundamental optical principles, the delivery of imaging and differential spectroscopy of exoplanetary systems becomes possible. This paper describes a pathfinder that has implemented these ideas into a robust and compact photonic-chip platform known as the GLINT (Guided-Light Interferometric Nulling Technology) project.
- 3 January 2020
- Published by SPIE-Intl Soc Optical Eng
- Vol. 11203, 26
Imaging exoplanets with nulling interferometry using integrated-photonics: the GLINT project
As confirmed exoplanets climb into the thousands, the era of exoplanets discovery is giving way to exoplanet characterization. The most desirable scenario is one where the exoplanet can be directly imaged. Direct imaging not only delivers orbital parameters, but also yields the chemical composition of the atmosphere. The potential for habitable zone exoplanets to exhibit biosignatures in such data from a visionary future instrument drives intense interest. However, this requires to simultaneously reach extremely high star-to-planet contrast (from 104 to 108) and extremely high angular resolution (around and below the diffraction limit). Accomplishing all this through the atmosphere blurred by turbulence remains a critical challenge, yet it is one that nulling interferometry in combination with extreme adaptive optics aims to meet. This technique overcomes the contrast problem by removing the starlight with destructive interference, permitting the faint light coming from the planet to remain. In this paper, we present the latest evolution of nulling interferometry instrumentation: the integrated- photonic nuller. It allows spatial filtering, multiple simultaneous baselines, simultaneous photometric channels and simultaneous measurement of the "nulled" signal (the light emitted from the planet after cancelling the starlight) as well as the "anti-nulled" signal (the channel containing the redirected starlight). Exploiting these fundamental optical principles, the delivery of imaging and differential spectroscopy of exoplanetary systems becomes possible. This paper describes a pathfinder that has implemented these ideas into a robust and compact photonic-chip platform known as the GLINT (Guided-Light Interferometric Nulling Technology) project.
- Open Access
- 3 July 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (14) , 18470-18479
Novel concept for visible and near infrared spectro-interferometry: laser-written layered arrayed waveguide gratings
With the growing complexity of astronomical instruments devoted to interferometry, such as MATISSE (a 4 telescope beam combiner) or FIRST (a 9 sub-apertures beam combiner), and the rebirth of space projects such as LIFE (a mid-infrared interferometer), integrated optics devices can be an interesting and complementary approach for beam combination of a large number of apertures. Moreover, one of the approaches for beam combination is pairwise combination of the inputs (either from individual telescopes or from aperture masking on a single telescope), which scales as N(N-1)/2 for an N input system. Astrophotonics devices are attractive to reduce mass and system complexity, while achieving all the beam combination in a single chip, even for a high number of inputs. The aim of this work is to develop a compact photonic device for astronomical applications and demonstrate a proof-of-concept of a spectro-interferometer. In this paper ultrafast laser inscription is used to fabricate three arrayed waveguide gratings (AWGs) stacked vertically. This arrangement enables spectral dispersion and interferometry to be measured simultaneously. Individual AWGs were designed for operation at 633 nm, and demonstrated at 633nm and 830nm. A scan between 790 and 830nm was also achieved to study the wavelength behavior of the AWG. Using a segmented mirror, light at 633nm or 830nm was injected simultaneously into three AWGs layered 40 µm apart, showing analogous behavior for all three layers and no unexpected crosstalk. Finally the three outputs were vertically combined to obtain interference fringes, showing the feasibility of spectro-interferometry and opening the way for compact astrophotonic devices devoted to phase closure studies, used in astronomy to reduce the effect of atmospheric turbulence.
- 3 July 2018
- Published by Optica Publishing Group in Optics Express
- Vol. 26 (14) , 18470-18479
Open AccessNovel concept for visible and near infrared spectro-interferometry: laser-written layered arrayed waveguide gratings
With the growing complexity of astronomical instruments devoted to interferometry, such as MATISSE (a 4 telescope beam combiner) or FIRST (a 9 sub-apertures beam combiner), and the rebirth of space projects such as LIFE (a mid-infrared interferometer), integrated optics devices can be an interesting and complementary approach for beam combination of a large number of apertures. Moreover, one of the approaches for beam combination is pairwise combination of the inputs (either from individual telescopes or from aperture masking on a single telescope), which scales as N(N-1)/2 for an N input system. Astrophotonics devices are attractive to reduce mass and system complexity, while achieving all the beam combination in a single chip, even for a high number of inputs. The aim of this work is to develop a compact photonic device for astronomical applications and demonstrate a proof-of-concept of a spectro-interferometer. In this paper ultrafast laser inscription is used to fabricate three arrayed waveguide gratings (AWGs) stacked vertically. This arrangement enables spectral dispersion and interferometry to be measured simultaneously. Individual AWGs were designed for operation at 633 nm, and demonstrated at 633nm and 830nm. A scan between 790 and 830nm was also achieved to study the wavelength behavior of the AWG. Using a segmented mirror, light at 633nm or 830nm was injected simultaneously into three AWGs layered 40 µm apart, showing analogous behavior for all three layers and no unexpected crosstalk. Finally the three outputs were vertically combined to obtain interference fringes, showing the feasibility of spectro-interferometry and opening the way for compact astrophotonic devices devoted to phase closure studies, used in astronomy to reduce the effect of atmospheric turbulence.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Measuring stellar diameters with a compact integrated photonic nulling interferometer in a 8 meter-class telescope
One of the main challenges of astronomy these days is to directly image exoplanets and protoplanetary disks using diffraction limited optics. Due to the proximity of the planet to the host star and its small size, the discovery of new planets requires high angular resolution and high contrast imaging. Achieving these two requirements is challenging with existing astronomical instrument. However, the emerging field of physics called astrophotonics utilises photonic circuits to help build the core of astronomical instruments to address this problem. In addition, astrophotonics enables compact fully-integrated optical chips such as interferometers that are much easier to stabilise against mechanical and thermal changes in the environment.
- 1 June 2017
- Published by Institute of Electrical and Electronics Engineers (IEEE)
- p. 1
Measuring stellar diameters with a compact integrated photonic nulling interferometer in a 8 meter-class telescope
One of the main challenges of astronomy these days is to directly image exoplanets and protoplanetary disks using diffraction limited optics. Due to the proximity of the planet to the host star and its small size, the discovery of new planets requires high angular resolution and high contrast imaging. Achieving these two requirements is challenging with existing astronomical instrument. However, the emerging field of physics called astrophotonics utilises photonic circuits to help build the core of astronomical instruments to address this problem. In addition, astrophotonics enables compact fully-integrated optical chips such as interferometers that are much easier to stabilise against mechanical and thermal changes in the environment.