RZRana I. K. Zaki

Rana I. K. Zaki

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Rana I. K. Zaki has a total of 17 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Development of a support vector machine-based predictive model for bored pile productivity in residential construction projects in Iraq

    by Laith N. Ali, Saja Hadi Raheem Al-Dhamad, Faiq M. S. Al-Zwainy, Rana I. K. Zaki, Ibrahim Farouq Varouqa, Salman Dawood Salman Al-Dulaimi, Aseel H. Obaid, Mazin M. Sarhan, Albert P.C. Chan, Rana A. Maya, et al.

    Accurate prediction of construction productivity remains a critical challenge in the civil engineering sector, particularly for deep foundation works such as bored piles in residential projects. This study proposes a data-driven predictive model based on Support Vector Machine (SVM) to estimate the productivity of bored piles in high-rise residential construction projects in Iraq. Real-world data were collected from the Iraq Gate Residential Complex and used to train and validate the model. Key influencing factors included pile geometry, soil type, equipment specifications, crew size, and working hours. The model achieved a mean prediction accuracy of 99.89% and a correlation coefficient (R) of 97.02%, demonstrating superior performance over conventional estimation methods. These findings highlight the practical value of machine learning approaches in enhancing resource planning and decision-making during early project phases. The proposed SVM-based model can support contractors and engineers in forecasting performance outcomes and minimizing scheduling uncertainties in similar construction settings.


  • Open Access

    Unveiling critical success factors for program management in the construction industry

    by Ibrahim Farouq Varouqa, Rana I. K. Zaki, Faiq M. S. Al-Zwainy, Mohammed S. Kh. Al-Marsomi, Aseel H. Obaid

    In the literature on the construction industry, program management comprises related projects coordinated and managed to implement construction projects that have the same objectives, and would be feasible if handled separately, and are useful for all stakeholders in the construction sector. The emphasis of this research is on exploring and identifying the characteristics crucial to and the relative significance of Critical Success Factors (CSF) in Iraq's Regional Development Programs (RDPs) in order to manage these programs with high efficiency and accuracy, to determine whether the program's projects have been completed satisfactorily. Consequently, to conduct this study, the initial literature review pertaining to research keywords (Program management, Critical Success Factor, Success Program) to a Systematic Literature Review (SLR) approach. Subsequently, a conceptual framework encompassing all facets of program management success factors is proffered. To evaluate the actuality of RDPs in Iraqi provinces and to determine the degree to which their advantages and aims have been attained, a list of 29 CSFs has been chosen based on the experts' opinions from nine international studies selected from the SLR approach. Conclusion: The results indicated that the selected critical success factors in RDPs are categorized and organized into four categories: program planning, strategy of the organization, stakeholders, and construction program performance.


  • Open Access

    Sudden collapse of steel water tower tank due to compound openings in critical zone

    by Rana I. K. Zaki, Hussam K. Risan, Ramzi Q. Mohammed

    Despite previous efforts to detect concentrated stresses in structures with holes, a complete understanding of structures that contain compound openings in addition to screw holes in critical stress areas is incomplete, especially for structures that are subject to sudden collapse. This study aims to conduct a laboratory test program to simulate a suddenly collapsed tank that contains compound holes in addition to the screw holes distributed on the cleaning opening located in the critical stress area. Six laboratory simulated models with two repeats for each are tested to represent the stages of implementation of the cleanout opening and to find out the causes of the sudden failure of the tank. Significant reduction in resistance when having a centre hole compared to the control plate. The importance of the stiffeners is evident in this region, as the resistance decreased slightly compared to the control plate by adding reinforcement plates on both sides. The resistance drop remains almost constant despite the stiffening panels being punctured on both sides with the same diameter as the main hole, which confirms the continued importance of the stiffeners at this stage. An improvement in resistance was observed when a cap was added to one of the holes in the stiffeners. A slight change in resistance was also observed when the cap was pierced with another hole to weld the cleaning pipe due to the failure remaining within the screw holes surrounding the main hole. In conclusion, the safety factor should be increased in areas that contain compound openings.

  • Open Access

    Graphical Comparison of Critically Damped Versus Overdamped Free Vibration of Single Degree of Freedom Structure

    by Israa Abdulameer Resen, Rana I. K. Zaki, Hussam K. Risan

    In most vibration structural problems, the value of damping is less than unity. Such a small amount of damping may increase near or exceed unity under certain special circumstances. Critically damped and overdamped solutions are completed until the final expressions are generated and an indication provided by MATLAB as to how these expressions depend on viscous damping ratios, natural frequencies, and initial conditions. The developed equations of various damping systems, which are commonly employed in vibration analyses, are compared, with several important observations are noted. Natural frequency is of primary importance when controlling the settling time of critically damped and overdamped vibration responses. Initial conditions are also considered main factors that affect critically damped and overdamped vibration peak responses. Damping plays a crucial role in the peak response of an overdamped system. A direct relationship between the damping ratio and the peak response is observed, whereas an inverse relationship exists between the damping ratio and the settling time. Therefore, critically damped and overdamped systems exhibit an identical response in the large scale perspective, whereby they first rise and then fall. In the zoomed scale, the peak response of the overdamped system is lower than that of the critically damped system, and the latter falls faster than the former. No cyclic response is observed, and the vibration statement is abnormally used for both critically damped and overdamped systems.


  • Open Access

    Validity of artificial neural modeling to estimate time-dependent deflection of reinforced concrete beams

    by Faiq M. S. Al-Zwainy, Rana I. K. Zaki, Atheer Mahmood Al-Saadi, Huda F. Ibraheem

    The architecture and weights of an artificial neural network model that predicts time-dependent deflection have been developed and optimized. To satisfy the serviceability limit states, a concrete structure must be serviceable and perform its intended function throughout its working life. Excessive deflection should not impair the function of the structure or be aesthetically unacceptable. Cracks should not be unsightly or wide enough to lead to durability problems. Design for the serviceability limit states involves making reliable predictions of the instantaneous and time-dependent deflection of reinforced concrete beams. This is complicated by the nonlinear behavior of concrete caused mainly by cracking, tension stiffening, creep, and shrinkage. This paper provides a statistical approach for predicting the time-dependent deflection of reinforced concrete beams at service loads and outlines a validity of the proposed method in comparison with the American Concrete Institute (ACI) method.