KFKamel Fezzaa

Kamel Fezzaa

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Kamel Fezzaa has a total of 33 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Quantification of Fine Spray Evolution in Near Field of Various Swirl Burst Injectors Using High-Speed X-Ray Imaging

    by Md Shakil Ahmed, John Cary, Kamel Fezzaa, Samuel Clark, Stephen T. McClain, Lulin Jiang

    This study investigates how internal and external swirls affect the immediate near-field fine-droplet evolution of novel Swirl Burst (SB) twin-fluid injectors. Efficient fire suppression depends strongly on atomization. Unlike conventional jet-breaking injection, SB atomizers generate fine sprays immediately through primary atomization by bubble-bursting and secondary breakup by shear-layer instabilities. In this work, internal and/or external swirls are introduced to enhance primary atomization (SBP), secondary atomization (SBS), or both combined (SBC and reverse-swirl SBCR). Traditional laser-based optical diagnostics struggle to simultaneously resolve fine droplets and achieve high temporal resolution when investigating spray dynamics. Therefore, high-speed X-ray imaging at 3 µm/pixel and 5 MHz was used to capture previously incompletely resolved fine droplets (~6–30 µm) for the fine SB atomization and quantify droplet size and mass distributions at an air-to-liquid mass ratio (ALR) of 1.75. Results showed that all SB injectors produced fine droplets, with more than 90% below 18 µm at 9 mm downstream. SBCR provided the most uniform droplet distribution with improved stability, while SBP and SBS produced the widest and narrowest spray respectively. Furthermore, SBP has the highest estimated atomization efficiency, followed by SBC, SBCR, and SBS for droplets ranging from ~6–30 μm, confirming their potential for fire suppression and clean energy applications.

  • Open Access

    An Integrated High-Speed Microstructural Characterization Method Using Simultaneous XRD, Stereo-DIC, and PCI

    by C. D. Kirk, A. R. Roginski, S. J. Clark, K. Fezzaa, W. W. Chen

    High-speed characterization of the deformation mechanisms in polycrystalline metals requires the quantification of full strain fields and local microstructural evolutions simultaneously. In this paper, we present a novel experimental method to integrate phase-contrast imaging (PCI), stereographic digital image correlation (stereo-DIC), and full-ring X-ray diffraction (XRD) to allow for the simultaneous characterization of polycrystalline metals at 1MHz or higher. A Kolsky bar was integrated into the synchrotron X-ray source in Sector 32 ID-B at the Advance Photon Source (APS) at Argonne National Laboratory. When the sample is dynamically loaded, the diagnostic methods of full-ring XRD, PCI, and stereo-DIC are properly synchronized to record the deformation behavior at both continuum and microstructural scales as a function of the loading history. An advanced high-strength steel (AHSS) is used as a model material to demonstrate the capabilities of this new experimental method.

  • Open Access

    In Situ X-ray Radiography and Computational Modeling to Predict Grain Morphology in β-Titanium during Simulated Additive Manufacturing

    by Chris Jasien, Alec Saville, Chandler Gus Becker, Jonah Klemm-Toole, Kamel Fezzaa, Tao Sun, Tresa Pollock, Amy J. Clarke

    The continued development of metal additive manufacturing (AM) has expanded the engineering metallic alloys for which these processes may be applied, including beta-titanium alloys with desirable strength-to-density ratios. To understand the response of beta-titanium alloys to AM processing, solidification and microstructure evolution needs to be investigated. In particular, thermal gradients (Gs) and solidification velocities (Vs) experienced during AM are needed to link processing to microstructure development, including the columnar-to-equiaxed transition (CET). In this work, in situ synchrotron X-ray radiography of the beta-titanium alloy Ti-10V-2Fe-3Al (wt.%) (Ti-1023) during simulated laser-powder bed fusion (L-PBF) was performed at the Advanced Photon Source at Argonne National Laboratory, allowing for direct determination of Vs. Two different computational modeling tools, SYSWELD and FLOW-3D, were utilized to investigate the solidification conditions of spot and raster melt scenarios. The predicted Vs obtained from both pieces of computational software exhibited good agreement with those obtained from in situ synchrotron X-ray radiography measurements. The model that accounted for fluid flow also showed the ability to predict trends unobservable in the in situ synchrotron X-ray radiography, but are known to occur during rapid solidification. A CET model for Ti-1023 was also developed using the Kurz–Giovanola–Trivedi model, which allowed modeled Gs and Vs to be compared in the context of predicted grain morphologies. Both pieces of software were in agreement for morphology predictions of spot-melts, but drastically differed for raster predictions. The discrepancy is attributable to the difference in accounting for fluid flow, resulting in magnitude-different values of Gs for similar Vs.


  • Time-Resolved Geometric Feature Tracking Elucidates Laser-Induced Keyhole Dynamics

    by Jongchan Pyeon, Joseph Aroh, Runbo Jiang, Amit K. Verma, Benjamin Gould, Andy Ramlatchan, Kamel Fezzaa, Niranjan Parab, Cang Zhao, Tao Sun, et al.


  • Open Access

    X-Ray Characterization of Real Fuel Sprays for Gasoline Direct Injection

    by Brandon Sforzo, Aniket Tekawade, Alan Kastengren, Kamel Fezzaa, Jan Ilavsky, Christopher F Powell, Yuanjiang Pei, Anqi Zhang, Robert Levy

    The effects of fuel blend properties on spray performance has been investigated for several operating conditions using a side-mount injector for Gasoline Direct Injection (GDI) applications. Several X-ray diagnostic techniques were conducted to characterize the injector and spray morphology. Detailed internal geometry of the GDI injector was measured with a feature-resolution of

  • Open Access

    X-Ray Characterization of Real Fuel Sprays for Gasoline Direct Injection

    by Brandon A. Sforzo, Aniket Tekawade, Alan L. Kastengren, Kamel Fezzaa, Jan Ilavsky, Christopher F. Powell, Yuanjiang Pei, Anqi Zhang, Robert Levy

    The effects of fuel blend properties on spray and injector performance has been investigated in a side-mount injector for gasoline direct injection (GDI) using two certification fuel blends: Euro 5 and Euro 6. Several X-ray diagnostic techniques were conducted to characterize the injector and spray morphology. Detailed internal geometry of the GDI injector was resolved to 1.8 μm, through the use of hard X-ray tomography. The geometry characterization of this six-hole GDI, side mount injector, quantifies relevant hole and counterbore dimensions and reveals the intricate details within the flow passages, including surface roughness and micron-sized features. Internal valve motion was measured with a temporal resolution of 20 μs and a spatial resolution of 2.0 μs, for three injection pressures and several injector energizing strategies. The needle motion for both fuels exhibits similar lift profiles for common energizing commands. A combination of X-ray radiography and ultra-small-angle X-ray scattering (USAXS) was used to characterize the fuel mass distribution and the droplet sizing, respectively. Tomographic spray radiography revealed the near-nozzle distribution of fuel mass for each of the fuels and the asymmetry produced by the angled nozzles. Under evaporative conditions, the two fuels show minor differences in peak fuel mass distribution during steady injection, though both exhibit fluctuations in injection during the early, transient phase. USAXS measurements of the path-specific surface area of the spray indicated lower peak values for the more evaporative conditions in the near nozzle region.