AZAnqi Zhang

Anqi Zhang

*This is an algorithmically generated author record based on publicly available information.

Anqi Zhang has a total of 61 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Numerical and experimental development of a swirl based hydrogen combustion engine on 15L platform

    by Rafael Lago Sari, Brock Merritt, Le Zhao, Anqi Zhang, Steven Sommers, Sriram Popuri, Nick Bowen, Griffin Matuszak


  • Multi-objective performance optimization of an active pre-chamber combustion engine

    by Xinlei Liu, Mickael Silva, Balaji Mohan, Rafael Menaca, Anqi Zhang, Abdullah S. AlRamadan, Yasser A. Qahtani, Emre Cenker, Hong G. Im

    The pre-chamber combustion concept has gained increasing attention in engine research for its ability to accelerate combustion, extend lean-burn limits, and enhance overall performance. This study presents a comprehensive multi-objective optimization of an active pre-chamber natural gas engine using a detailed design of experiments integrated with multi-dimensional computational fluid dynamics simulations. The optimization targeted reductions in fuel consumption and emissions, including nitrogen oxides, carbon monoxide, and unburned hydrocarbons. Six independent and three dependent geometric parameters of the pre-chamber were considered. Using the Sobol sampling method, 300 design cases were generated through CAESES. Compared to the baseline narrow-throat 12-nozzle design, a pre-chamber featuring a wider throat and 8 nozzles demonstrated the best overall performance. This improvement was primarily due to mitigated turbulent jet interactions and reductions in wall heat transfer, incomplete combustion, and exhaust losses. In contrast, the least effective configurations exhibited weak reacting jets, resulting in slower flame propagation and delayed combustion in the main chamber. Among the geometric parameters studied, the nozzle included angle, throat radius, and cone height were found to have the most significant impact on combustion behavior. Conversely, nozzle diameter, nozzle count, and offset distance showed comparatively fewer effects. A narrower jet angle slowed combustion in the squish region, delaying combustion phasing and increasing exhaust losses. Similarly, deviations from optimal throat radius and cone height diminished jet intensity and combustion completeness, deteriorating engine performance. The findings are anticipated to provide valuable guidance for the design and optimization of pre-chamber geometries in high-efficiency internal combustion engines.


  • Numerical evaluation of wall-guided spark assistance for cold operations in a heavy-duty gasoline compression ignition engine

    by Le Zhao, Yu Zhang, Yuanjiang Pei, Anqi Zhang

    This study focused on conducting three-dimensional (3D) computational fluid dynamics (CFD) simulations to evaluate the impact of wall-guided spark plug ignition assistance on gasoline compression ignition (GCI) combustion performance during cold operations. The numerical simulations were performed on a 6-cylinder, 15 L heavy-duty diesel engine operating at a compression ratio (CR) of 16.5 using RON92 E0 gasoline. Spark assistance was simulated by incorporating an ignition model with the necessary spark energy to ensure stable combustion during cold operations. Initially, closed-cycle 3D CFD combustion simulations, based on a design of experiments (DoE) campaign, were employed to investigate a lean spark-assisted CI strategy during the cold-to-warm transition. A numerical optimization approach, based on a Response Surface Model (RSM), was adopted to optimize injector spray patterns, fuel injection strategies, and in-cylinder swirl motion to achieve the best performance of wall-guided spark assistance combustion. The optimized injector spray pattern, fuel injection strategy, and swirl ratio were predicted to provide 12 percentage points increase in combustion efficiency over the baseline, while meeting constraints for maximum pressure rise rate (MPRR) and NO x emissions (MPRR < 5 bar/CAD and NO x < 2 g/kWh). Building on the aforementioned optimal design, an open-cycle 3D CFD analysis was subsequently carried out to simulate engine starts at various cold ambient temperatures using a stoichiometric, spark-initiated flame propagation strategy. The results showed that with the optimized design, reasonable GCI combustion during engine starts was achieved at cold ambient temperature of 300 K. Notably, as the ambient temperature decreases from 300 to 243 K, the emergence of a noticeable fuel film was observed, presenting an undesirable potential for increased engine-out unburned hydrocarbon and smoke emissions. Considering the specific emission requirements at lower ambient temperatures, further investigations are warranted to assess the significance of the observed fuel film in relation to these criteria.

  • Data-driven co-optimization of piston and pre-chamber in a heavy-duty hydrogen engine

    by Rafael Menaca, Xinlei Liu, Balaji Mohan, Anqi Zhang, Mickael Silva, Mohammad Raghib Shakeel, Abdullah S. AlRamadan, Emre Cenker, Yuanjiang Pei, Hong G. Im


  • Optimization of spray breakup model parameters for predicting fuel spray and film characteristics in gasoline direct injection engines

    by Hao-Pin Lien, Diego Bestel, Le Zhao, Anqi Zhang, Ji-Woong Park, Carl-Philipp Ding, Namho Kim, Magnus Sjöberg, Muhsin Ameen, Yuanjiang Pei, et al.

    This study investigated the behavior of gasoline direct injection (GDI) sprays using computational fluid dynamics (CFD). The authors developed an approach to identify optimal spray breakup model parameters by evaluating an error function across numerous simulations, with the goal of minimizing discrepancies from experimental data. Using the optimal setup, the simulated spray matched well with projected liquid volume distributions, liquid penetration, and spray width measured in a constant-pressure continuous-flow chamber. To further validate the approach, the same setup was tested across various fuels, injectors, and operating conditions. Subsequently, the optimal setup, along with a recently developed spray-wall interaction model, were applied to a direct-injection spark-ignited engine under late-injection conditions to predict and evaluate fuel film formation and evolution at varying engine coolant temperatures. With the centrally mounted injector directing the spray toward the piston, simulations indicated that the spray tends to impinge on the piston surface. The proposed simulation framework also accurately captured the aggregate film area on the piston surface, aligning with previously published experimental results. Moreover, simulations showed that increasing the coolant temperature from cold start conditions (333 K) to warm conditions (363 K) reduced the fuel mass deposited on the piston by roughly 50%. Furthermore, for the spray-guided engine configuration studied in this work, the CFD model predicted minimal film deposition on the spark plug electrodes regardless of the coolant temperatures due to a relatively weak in-cylinder flow during the compression phase.


  • Simulated-based combustion system development in a direct-injection spark-ignited hydrogen engine

    by Le Zhao, Anqi Zhang, Rafael Lago Sari, Sriram S Popuri, Nick Bowen, Griffin Matuszak


  • A comprehensive numerical investigation on spray models for Direct-Injection Spark-Ignition engines

    by Diego Bestel, Joohan Kim, Le Zhao, Anqi Zhang, Ji-Woong Park, Fabien Tagliante, Lyle Pickett, Muhsin Ameen, Roberto Torelli


  • Realistic fuel spray modeling for gasoline direct injection engine applications

    by Sayop Kim, Lorenzo Nocivelli, Anqi Zhang, Alexander K Voice, Yuanjiang Pei

    Fuel spray modeling plays a critical role during modern gasoline direct injection (GDI) engine development due to fuel injection’s dominant impact on engine performance and emissions as well as the complex physical processes involved. In engineering three-dimensional (3D) computational fluid dynamics (CFD) simulations, the liquid-phase fuel atomization, evaporation, and mixing are usually modeled with the discrete droplet model (DDM) adopting a Lagrangian approach for multiphase CFD simulations. To this end, general practices heavily depend on the reduced order characterization of the injector nozzle flow. However, such simplified injector modeling may lead to insufficient representations of the complex spray dynamics. To tackle this problem, this study proposes a novel workflow to numerically evaluate GDI sub-cooled and flash-boiling sprays under engine-relevant conditions using a side-mounted GDI injector together with real gasoline fuel properties. The workflow introduces a one-way coupling (OWC) method leveraging high-fidelity nozzle flow simulations to provide realistic boundary conditions to the Lagrangian injector model. The proposed workflow was first verified in a constant volume chamber (CVC) environment and then implemented in a practical GDI engine setup to study spray morphology, fuel-air mixing, and wall-wetting propensity. In addition, detailed comparison was performed between the OWC method and the conventional rate of injection (ROI) routine. Quantitative analysis of spray characteristics was conducted to highlight possible source of discrepancies of the conventional ROI method.