ANAmoolya Nirmal

Amoolya Nirmal

*This is an algorithmically generated author record based on publicly available information.

Amoolya Nirmal has a total of 41 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Low Threshold Voltage Lead–Tin Perovskite Transistors with Enhanced Ambient Stability

    by Shibi Varku, Natalia Yantara, Yeow Boon Tay, Ahmad Ibrahim, Lydia Helena Wong, Darrell Jun Jie Tay, Amoolya Nirmal, Nripan Mathews

    Thin-film transistors (TFTs) based on lead-tin perovskites have garnered significant attention for electronic applications due to their high mobilities. However, the facile oxidation of Sn2+ to Sn4+ results in unintended doping, compromising channel modulation and reducing on-off ratios. In this work, we investigate the effect of A- and B-site cation engineering on TFT performance and stability. We demonstrate an ambient-stable device (RH > 70%, 25 °C) with a threshold voltage (Vth) of 4.7 V and an on-off ratio of ∼106, maintaining stability for over an hour without encapsulation. This enhanced performance is attributed to substituting cesium with the larger methylammonium cation, which suppresses Sn oxidation and doping, as supported by XPS and Hall measurements. Such devices with low Vth and high on-off ratios are promising for low-power electronic circuits with reliable and well-defined switching characteristics, highlighting the potential of A-site tuning in perovskite TFTs.


  • Process Challenges and Mitigation Techniques for Realization of RF Modules at Millimeter-wave Frequencies

    by Rashmi Behera, Kumar Sangam, Bhm Darukesha, Jolie R, Pragati Swami, Suma S Lonakdi, Shilpa K Ramachandra Reddy, Kamaljeet Singh, A V Nirmal

    The critical aspect of circuit realization at higher frequencies poses various challenges as a small drift in phase or line parameters drastically affects circuit performances and the grounding effect becomes prominent at higher frequencies. Hence, attachment and proper field launching aspects becomes important. This article presents four innovative processes which have been developed for overcoming these challenges for timely realisation of a reliable millimeter wave Data Transmitter: attachment of thin Printed Circuit Boards (PCBs) to carrier plates using epoxy film to avoid bowing issues and enhance proper electrical grounding, pattern generation with 40 μm feature size in 45 o phase shifter, trimming of microstrip length to achieve required phase-shift angle and assembly of state-of-the-art Radio-Frequency (RF) connector pins. Data Transmitter at high frequency thus realised was flown onboard and performance is satisfactory. In this article, the various new processes developed to enable reliable performance of the circuits at higher frequencies are presented. Also, it addresses the challenges as well as the mitigation techniques. The results are also presented.


  • Novel Process for Miniature Low Dropout Voltage Regulator Hybrid for Aerospace Applications

    by Anju Singh, S Vaishnavi, Ajay Andhiwal, A.V. Nirmal

    Low Dropout Regulators (LDO) are extensively used in power conditioning and distribution systems that need a low noise & stable voltage supplies independent of load, input voltage variations, temperature, and time. This article details the development of thick film technology-based miniature LDO hybrid providing excellent electrical performance with required thermal management attained by implementing high thermal conductive GlidCop base metal package & Copper cored pin materials for applications in space power systems. Advance attachment materials used at various segments of hybrid i.e., silicon die component to substrate, substrate to package and heat sink interface material for isometric heat transfer, are also highlighted. Hybrid realization of LDO faced various challenges as traditional packaging approach results in instable performance with extremely unmanageable thermal deals. Fabrication challenges and issues faced while designing functional & Burn-in test jigs are also addressed. Glidcop package qualification and hybrid realization process qualification details have also been presented in this article.


  • Open Access

    Soft Actuator Materials for Electrically Driven Haptic Interfaces

    by Ankit, Terence Yan King Ho, Amoolya Nirmal, Mohit Rameshchandra Kulkarni, Dino Accoto, Nripan Mathews

    Haptics involves human touch sensing and tactile feedback and plays a crucial role in physical interactions of humans with their environment. There is an ever‐increasing interest in development of haptic technologies, due to their role in various applications such as robotics, virtual and augmented reality, healthcare, and smart electronics. Electrically driven actuation mechanisms for soft materials like dielectric elastomer actuators (DEAs), electrohydraulic soft actuators (ESAs), ionic polymer−metal composites (IPMCs), and liquid crystal elastomers (LCEs) hold the potential for the development of the next generation of haptic feedback devices due to a variety of advantages such as light weight and compact design, untethered activation and control, large actuation strains, and distributed and localized actuation. Herein, a detailed look is taken at the advancement in material designs for these electrically driven soft actuators. A detailed analysis of the different strategies for improving the electromechanical performance of existing material systems is presented. Approaches adopted to synthesize novel material systems are explained. Advancements in compliant electrode materials for the electrically driven soft actuators are also described. The conclusion reflects on the main challenges in the field and provides perspectives on recent advancements expected to have a significant impact.


  • Enabling high performance n-type metal oxide semiconductors at low temperatures for thin film transistors

    by Nidhi Tiwari, Amoolya Nirmal, Mohit Rameshchandra Kulkarni, Rohit Abraham John, Nripan Mathews

    The review highlights low temperature activation processes for high performance n-type metal oxide semiconductors for TFTs.


  • Bilayer BaSnO3 thin film transistors on silicon substrates

    by Wenhan Du, Anh Chien Nguyen, Rohit Abraham John, Jing Jing Yang, Mohit Rameshchandra Kulkarni, Edgar R. López-Mena, Amoolya Nirmal, Nripan Mathews

    Barium tin oxide BaSnO3 (BSO) is a novel wide-bandgap semiconducting material with high electron mobility and is considered as a promising alternative to indium-containing amorphous oxide semiconductors.


  • Field‐Driven Athermal Activation of Amorphous Metal Oxide Semiconductors for Flexible Programmable Logic Circuits and Neuromorphic Electronics

    by Mohit Rameshchandra Kulkarni, Rohit Abraham John, Nidhi Tiwari, Amoolya Nirmal, Si En Ng, Anh Chien Nguyen, Nripan Mathews

    Despite extensive research, large‐scale realization of metal‐oxide electronics is still impeded by high‐temperature fabrication, incompatible with flexible substrates. Ideally, an athermal treatment modifying the electronic structure of amorphous metal oxide semiconductors (AMOS) to generate sufficient carrier concentration would help mitigate such high‐temperature requirements, enabling realization of high‐performance electronics on flexible substrates. Here, a novel field‐driven athermal activation of AMOS channels is demonstrated via an electrolyte‐gating approach. Facilitating migration of charged oxygen species across the semiconductor–dielectric interface, this approach modulates the local electronic structure of the channel, generating sufficient carriers for charge transport and activating oxygen‐compensated thin films. The thin‐film transistors (TFTs) investigated here depict an enhancement of linear mobility from 51 to 105.25 cm2 V−1 s−1 (ionic‐gated) and from 8.09 to 14.49 cm2 V−1 s−1 (back‐gated), by creating additional oxygen vacancies. The accompanying stochiometric transformations, monitored via spectroscopic measurements (X‐ray photoelectron spectroscopy) corroborate the detailed electrical (TFT, current evolution) parameter analyses, providing critical insights into the underlying oxygen‐vacancy generation mechanism and clearly demonstrating field‐induced activation as a promising alternative to conventional high‐temperature annealing strategies. Facilitating on‐demand active programing of the operation modes of transistors (enhancement vs depletion), this technique paves way for facile fabrication of logic circuits and neuromorphic transistors for bioinspired computing.


  • Ultralow Power Dual-Gated Subthreshold Oxide Neuristors: An Enabler for Higher Order Neuronal Temporal Correlations

    by Rohit Abraham John, Nidhi Tiwari, Chen Yaoyi, Ankit, Naveen Tiwari, Mohit Kulkarni, Amoolya Nirmal, Anh Chien Nguyen, Arindam Basu, Nripan Mathews

    Inspired by neural computing, the pursuit of ultralow power neuromorphic architectures with highly distributed memory and parallel processing capability has recently gained more traction. However, emulation of biological signal processing via artificial neuromorphic architectures does not exploit the immense interplay between local activities and global neuromodulations observed in biological neural networks, and are unable to mimic complex biologically plausible adaptive functions like heterosynaptic plasticity and homeostasis. Here, we demonstrate emulation of complex neuronal behaviours like heterosynaptic plasticity, homeostasis, association, correlation and coincidence in a single neuristor via a novel dual-gated architecture. This multiple gating approach allows one gate to capture the effect of local activity correlations and the second gate to represent global neuromodulations, allowing additional modulations which augment their plasticity and enable higher order temporal correlations at a unitary level. Moreover, the dual-gate operation extends the available dynamic range of synaptic conductance while maintaining symmetry in the weight-update operation, allowing the system to access an expanded number of memory states. Finally, operating neuristors in the sub-threshold regime enables synaptic weight changes with high gain, while maintaining ultralow power consumption of the order of femto-Joules.


  • Light Trapping in Inverted Organic Photovoltaics With Nanoimprinted ZnO Photonic Crystals

    by Amoolya Nirmal, Aung Ko Ko Kyaw, Wang Jianxiong, Kapil Dev, Xiaowei Sun, Hilmi Volkan Demir

    Zinc oxide photonic crystal (ZnO PC) formed via facile nanoimprinting was employed on the ZnO electron selective layer of inverted organic photovoltaics (OPV). Optimized inverted OPV fabricated with these highly ordered periodic structures provided effective light trapping, which resulted in increased incident light absorption in the active layer. Consequently, OPVs with the ZnO PC layers show a 23% current density improvement compared with OPVs with planar ZnO layer. Finite-difference time-domain simulation studies show that the electric field intensity is significantly higher in the active layer for devices with ZnO PC structures in comparison with reference devices with planar ZnO electron selective layer. Nanoimprinted ZnO PC is, thus, a viable method for light absorption and efficiency enhancement in OPVs.