Adilto P. A. Cunha
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Adilto P. A. Cunha has a total of 6 co-authors. Here are the top co-authors by number of shared publications:
- Noé Cheung
Department of Manufacturing and Materials Engineering, University of Campinas—UNICAMP, Campinas 13083-860, SP, Brazil
2 shared publications - Clarissa Cruz
Department of Manufacturing and Materials Engineering, University of Campinas UNICAMP, Campinas, Brazil
1 shared publication - Emanuel Negrão Macêdo
Federal University of Para
1 shared publication - Leonardo dos Santos e Santos
Graduate Program in Natural Resources Engineering of the Amazon (PRODERNA), Institute of Technology (ITEC), Federal University of Pará (UFPA), Belém 66075-110, Brazil
1 shared publication - Paulo Roberto Campos Flexa Ribeiro Filho
Departamento de Engenharia Mecânica, Universidade Estadual do Maranhão, São Luís 65055310, MA, Brazil
1 shared publication - Rodrigo da Silva Miranda
Universidade Estadual de Campinas, Brasil
1 shared publication
Latest Publications
- Open Access
- 20 July 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (14) , 11312
Belt Rotation in Pipe Conveyors: Failure Mode Analysis and Overlap Stability Assessment
Pipe conveyors provide sustainable solutions for environmentally sensitive or topographically complex powdered and bulk-solid handling processes; however, belt rotation is among the most critical failure modes of these equipment, influencing engineering, operational, and maintenance activities throughout the conveyors’ lifecycles. Position changes in the overlap are mechanical responses to uneven contact forces between the vulcanizing rubber belt and the idler rolls, owing to the highly nonlinear process of the belt folding from a trough to a tubular shape, and no method for quantifying the belt’s stability is currently available. In this study, we analyzed the failure mode of belt rotation and proposed a linearized model of an overlap stability index to evaluate the resilience of the overlap position through a case study of a short-flight curved pipe conveyor. Our proposal considers an interference model between the simulated torque of a curved flight in a pipe conveyor and the calculated torque of its equivalent straight flight by using kernel-smoothed density functions. It is adapted to incorporate adjustment factors for the filling degree based on simulations, the effect of the overlap in the forming force of the belt, the remaining useful life of the belt, and the coefficients of friction between the belt back cover and the idler rolls due to adhesion and hysteresis. An application was developed to calculate the belt’s rotational holding torque and rotary moment by processing real operational data, simulated contact forces, and the relevant equipment parameters. This analysis identified the reduced transverse bending stiffness and increased belt tension forces as the root causes for position changes with a loss of contact in the upper idler rolls of curved flights 10, 13, 15–16, and 17. The contributing factors included spots of augmented contact forces during the initial stages of the belt lifespan in curved flights 15–16, which presented unstable conditions due to increased opening forces, with an OSI of 0.8657. Furthermore, we proposed corrective and preventive action plans, an optimized replacement interval for the belt, and recommendations for design changes according to the relevant standards.
- 20 July 2023
- Published by MDPI AG in Sustainability
- Vol. 15 (14) , 11312
Open AccessBelt Rotation in Pipe Conveyors: Failure Mode Analysis and Overlap Stability Assessment
Pipe conveyors provide sustainable solutions for environmentally sensitive or topographically complex powdered and bulk-solid handling processes; however, belt rotation is among the most critical failure modes of these equipment, influencing engineering, operational, and maintenance activities throughout the conveyors’ lifecycles. Position changes in the overlap are mechanical responses to uneven contact forces between the vulcanizing rubber belt and the idler rolls, owing to the highly nonlinear process of the belt folding from a trough to a tubular shape, and no method for quantifying the belt’s stability is currently available. In this study, we analyzed the failure mode of belt rotation and proposed a linearized model of an overlap stability index to evaluate the resilience of the overlap position through a case study of a short-flight curved pipe conveyor. Our proposal considers an interference model between the simulated torque of a curved flight in a pipe conveyor and the calculated torque of its equivalent straight flight by using kernel-smoothed density functions. It is adapted to incorporate adjustment factors for the filling degree based on simulations, the effect of the overlap in the forming force of the belt, the remaining useful life of the belt, and the coefficients of friction between the belt back cover and the idler rolls due to adhesion and hysteresis. An application was developed to calculate the belt’s rotational holding torque and rotary moment by processing real operational data, simulated contact forces, and the relevant equipment parameters. This analysis identified the reduced transverse bending stiffness and increased belt tension forces as the root causes for position changes with a loss of contact in the upper idler rolls of curved flights 10, 13, 15–16, and 17. The contributing factors included spots of augmented contact forces during the initial stages of the belt lifespan in curved flights 15–16, which presented unstable conditions due to increased opening forces, with an OSI of 0.8657. Furthermore, we proposed corrective and preventive action plans, an optimized replacement interval for the belt, and recommendations for design changes according to the relevant standards.
- Open Access
Fatigue Failure Analysis of a Speed Reduction Shaft
The mining industry sector is notable for the severe service loads and varied environmental conditions that it imposes on its equipment and mechanical systems. It has become essential to identify the causes of failures and use the information to avoid similar failures and improve projects. In this paper, a study on shaft failure in a speed reduction box was carried out. A section of a fractured shaft made of hardened austempered steel was analyzed to determine the cause of the break. Fractography was performed to characterize the failure mode on the fracture surface. The microstructural analysis and hardness profile revealed that the shaft was inadequately heat treated, resulting in low resistance microstructures and the development of a thin layer of bainite at the shaft edge. Large amounts of inclusions were found in the fracture region, and the tensile tests revealed that the material had an elongation below the specification. The analyses showed that the combination of factors of a large amount of inclusions present in the low resistance banded structure, and the presence of concentrated pores in that same region, acted in a synergistic way to decrease the fatigue resistance and fatigue life of the shaft material.
Open AccessFatigue Failure Analysis of a Speed Reduction Shaft
The mining industry sector is notable for the severe service loads and varied environmental conditions that it imposes on its equipment and mechanical systems. It has become essential to identify the causes of failures and use the information to avoid similar failures and improve projects. In this paper, a study on shaft failure in a speed reduction box was carried out. A section of a fractured shaft made of hardened austempered steel was analyzed to determine the cause of the break. Fractography was performed to characterize the failure mode on the fracture surface. The microstructural analysis and hardness profile revealed that the shaft was inadequately heat treated, resulting in low resistance microstructures and the development of a thin layer of bainite at the shaft edge. Large amounts of inclusions were found in the fracture region, and the tensile tests revealed that the material had an elongation below the specification. The analyses showed that the combination of factors of a large amount of inclusions present in the low resistance banded structure, and the presence of concentrated pores in that same region, acted in a synergistic way to decrease the fatigue resistance and fatigue life of the shaft material.