MNMiloslav Novotný

Miloslav Novotný

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Miloslav Novotný has a total of 63 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    The Effect of Microwave Radiation on the Solidification of C-S-H Gels: Its Influence on the Solidified Cement Mixtures

    by David Průša, Stanislav Šťastník, Karel Šuhajda, Kateřina Svobodová, Tomáš Žajdlík, Klára Hobzová, Miloslav Novotný

    The present paper deals with the properties of hardened cement mixtures that have been exposed to microwave radiation. Microwaves fall under electromagnetic waves (EMW), and the main reason for using EMW radiation is to accelerate the drying of concrete as well as to reduce the time required to obtain the handling strength after it is removed from the mould. This paper is divided into two main parts. In the first part, three sets of cement samples were made. One set of samples solidified naturally in air and the second and third sets of samples were exposed to EMW radiation, with different exposure times for each. The solidification was then stopped, and the representation of the major minerals was experimentally determined. The second part of the experiment focuses on the properties of the hardened cement mixtures, both in terms of strength and physical properties. The experiment was carried out on two sets of samples. Each mixture was exposed to EMW radiation, the main differences being the exposure time and the position of the samples relative to the EMW generator. The aim of the experiments is to determine the resulting mechanical properties of the samples in comparison with those that were subjected to normal solidification in air. The data from these experiments suggest that microwave radiation can be used to accelerate the curing of concrete specimens, obtaining the handling strength in a relatively short time, but a reduction in the resulting strength can be expected compared to the reference specimens.


  • Open Access

    Microwave Technology, Its Use and Heating of Composite Aerated Concrete Blocks

    by Jindřich Sobotka, Zdeněk Jiroušek, Táňa Švecová, Miloslav Novotný

    This paper aims to test the method of using microwave technology for drying aerated concrete masonry. Furthermore, the propagation of microwave technology through irradiated elements and the effectiveness of eliminating the moisture of the given blocks were examined. There are various discussions about the potential use of this technology in civil engineering. However, they are often based on inaccurate, superficial knowledge. The cause is usually based on a lack of access to accurate professional knowledge. Although the potential use of microwave technology (MWT) has been known for many decades, its use in civil engineering tends to be of marginal interest. The research and tests are mostly carried out by private facilities, which protect the obtained knowledge as their “know how”. For this reason, VUT Brno teamed up with an implementation company and conducted several dozen experiments with repeated measurements of the effect of MWT on various building materials. Moreover, a number of different tests with drying of building materials, as well as the elimination of biotic pests in buildings have been carried out. However, the vast majority were experiments carried out in laboratory conditions, i.e., under precisely given boundary conditions, which were often very far from the conditions in real construction practice. Therefore, the goal of this experiment was to verify the use of microwave technology during the drying and heating of building materials. The experiments on the heating and drying of aerated concrete parts were divided into several phases, in which the dependence of the depth of heating on the time intervals of irradiation was verified. It was clearly concluded that the drying of this material by microwaves is very effective and efficient, particularly from time and financial viewpoints. Therefore, this technology can be successfully used in construction practice, which has started to be often used with reconstructions.


  • Open Access

    Experimental Research on Hybrid Hardwood Glue-Laminated Beams

    by Eva Šuhajdová, Pavel Schmid, Miloslav Novotný, Jan Pěnčík, Karel Šuhajda, Ondřej Uhlík

    The aim of this work was to verify the behavior of hybrid hardwood glue-laminated beams and the possibility of replacing Norway spruce (Picea abies) construction elements, especially in roof and ceiling structures. The samples were six lamellae homogeneous beech (Fagus sylvatica) beams and six-lamellae hybrid beech-poplar (Fagus sylvatica–Poplar spp.) beams; each beam had a cross-section of 60 × 120 mm and was glued with polyurethane adhesive. The samples were loaded using destructive four-point bending tests according to EN 408; the obtained bending strength and modulus of elasticity were statistically evaluated and compared to each other in both types of samples. The results showed that the examined properties of the hybrid beams (with a 16% weight reduction) are comparable to the properties of homogeneous beech glue-laminated beams. Based on the obtained data, the timber elements that are currently used can be successfully replaced by hardwood glue-laminated elements. Based on their higher load-bearing capacity, the cross-section depth can be reduced compared to a larger cross-section depth in spruce beams; this means that hardwood could be suitable in building renovations.


  • Open Access

    Heat Flow through a Facede with a Controlled Ventilated Gap

    by Aleš Rubina, Pavel Uher, Jakub Vrána, Miloslav Novotný, Ondřej Nespěšný, Daniel Skřek, Eva Šuhajdová, Jan Vystrčil, Marian Formánek

    The article presents current research results in the field of airflow through a façade with a width of 1 m and a height of 13.7 m and with a ventilated gap, and its effect on the year-round heat balance of this façade. An idea to influence airflow in the ventilated gap of the façade is presented based on the results of developed software and the suitability of closing the air gap in winter and in the transition period of the year is described. First, the boundary conditions of the calculations, which are further used in the energy balance between the interior of the building and the exterior environment are defined. In order to include these influences, a discrete analytical calculation was created. It consists of the time distribution of the investigated thermal phenomena calculations. A significant finding is an obvious benefit of controlling the airflow through a ventilated gap in the winter and especially in the transitional period of the year. This technological knowledge has a high potential for energy savings related to the heating of buildings. As the calculations show, airflow control through a ventilated façade reduces heat flow by 25–30% on average, and in contrast, it increases heat gains by 20% and the specific values are presented within the article.


  • Open Access

    Experimental Loading of Staircase Made from Cement Fiber Boards with Cellulose Fibers Using Full-Scale Model

    by Ondřej Nespěšný, David Bečkovský, Jan Vystrčil, Vojtěch Vaněk, Miloslav Novotný, Jan Pěnčík

    The study presents a possible innovative use of cement fiber boards (CFBs) reinforced with cellulose fibers for construction of an interior prefabricated staircase. Regarding the unusual use of traditional material that was used in all bearing elements of the staircase, a numerical simulation with the use of a material model SBETA was carried out and, subsequently, multiple experimental static loading was applied. In order to carry out experimental testing of static load capacity, a full-scale experiment method was chosen and performed on a real staircase structure for family houses. The full-scale experiment is considered the most precise method to test structures or material behavior. The obtained results show that the designed and tested staircase structure of CFBs is able to meet the requirements of technical standards related to static loading of staircases. The load test confirmed the potential use of cement fiber boards produced by the Hatschek process for real bearing structures under static loading.


  • Open Access

    Evaluation of the Sectoral Energy Development Intensity in the Euro Area Countries

    by Romualdas Ginevičius, Yuriy Bilan, Grzegorz Kądzielawski, Miloslav Novotny, Tomasz Kośmider

    National economic development largely depends on the development of the energy sector. Its condition is most commonly assessed based on the situation over the last year. An alternative approach, however, is to evaluate fluctuations in development that have occurred over a longer period. In this paper, both methodologies have been applied, in order to assess, based on the results, which of them is more accurate. The article hypothesizes that the second method is more accurate. To prove this empirically, values representing the energy development in various sectors (industrial, agricultural, transport, service and the other (miscellaneous) sectors) in various European countries over the 2009–2018 period were estimated. The development fluctuations that occurred during the period under consideration were evaluated according to two parameters—intensity and stability. The first parameter was taken to be the difference between the values representing energy development in a given sectors at the end and beginning of the period under consideration. The second parameter was taken as the aggregate change across consecutive time slots during which positive or negative fluctuations occurred. The value of energy development in a particular economic sector was estimated as the product of the latter coefficient and the development intensity indicator. Comparison of the results representing evaluation of energy development based on the methodology proposed, and the analysis of the situation in the last year for which data was available revealed that the results in both cases differed, with the values varying from 2% (for the transport sector) to 4.5% (for the agricultural sector). Taking into account the fact that the indicator representing energy development in particular economic sectors was estimated as a percentage of the total sectoral energy consumption, this difference was relatively significant (22.7 and 1.5% respectively). Thus, the findings suggest that application of the proposed methodology is relevant. The methodology provides a greater potential to adequately research issues related to national economic development.


  • Technical Measures for Limitation of Frost Depth in Soil

    by František Vlach, František Vajkay, Miloslav Novotný, Karel Šuhajda, David Bečkovský

    Renovation processes of existing buildings, including historically protected ones, are most of the time focused on energy saving. Nonetheless these processes might affect the function of existing shallow foundations. This paper deals with the influence of soils moisture content onto the depth of freezing. The depth of freezing depends on the type of soil as well, not just the moisture content. The influence of water and soils composition are generally perceived to be substantial for depth of freezing. Sub-zero temperatures do significantly change the soils characteristics, which has an effect to the building structure. The purpose of the research done by the personnel of Brno University of Technology was to determine the effects of special measures against frost penetration of soil. These measures included the application of various materials and solutions over the terrain in winter to monitor frost depth of soil.

  • Open Access

    Evaluation of School Building Energy Performance and Classroom Indoor Environment

    by Jitka Mohelníková, Miloslav Novotný, Pavla Mocová

    Existing building stock represents potential for energy saving renovations. Energy savings and indoor climate comfort are key demands for sustainable building refurbishment. Especially in schools, indoor comfort is an extremely important issue. A case study of energy consumption in selected school buildings in temperate climatic conditions of Central Europe region was performed. The studied buildings are representatives of various school premises constructed throughout the last century. The evaluation was based on data analysis of energy audits. The goal was aimed at assessment of the school building envelopes and their influence on energy consumption. One of the studied schools was selected for detailed evaluation. The school classroom was monitored for indoor thermal and visual environments. The monitoring was performed to compare the current state and renovation scenarios. Results of the evaluation show that the school buildings are highly inefficient even if renovated. Indoor climate in classrooms is largely influenced by windows. Solar gains affect interior thermal stability and daylighting. Thermal insulation quality of building envelopes and efficient solar shading systems appear to be fundamental tasks of school renovation strategies.


  • Open Access

    Evaluation of suitability of selected hardwood in civil engineering

    by Eva Šuhajdová, Miloslav Novotný, Jan Pěnčík, Karel Šuhajda, Pavel Schmid, Bohumil Straka

    Apart from gradually disappearing spruce wood, hardwood, particularly beech, oak, hornbeam, and maple, will be among the future local wood sources in the Central Europe. A multiple criteria analysis, PROMETHEE method, was used in order to select the most suitable hardwood for construction purposes. Apart from the forest land area criterion, seven other evaluation criteria were selected including physical and mechanical properties of individual hardwood species. Some of the properties in question were experimentally determined and verified. All alternatives were compared and their ranking was determined based on the use of PROMETHEE II method. The result is a single hardwood species whose use in civil engineering appears to be the most suitable in terms of the selected criteria. In addition, the influence of selected weights of individual criteria on the decision making process is discussed.


  • Open Access

    Fire Resistance of Large-Scale Cross-Laminated Timber Panels

    by Vladan Henek, Václav Venkrbec, Miloslav Novotný