David Bečkovský
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
David Bečkovský has a total of 17 co-authors. Here are the top co-authors by number of shared publications:
- Jan Pěnčík
Institute of Building Structures, Faculty of Civil Engineering, Brno University of Technology, Veveri 331/95, 602 00 Brno, Czech Republic
3 shared publications - Jan Vystrčil
Institute of Building Structures, Faculty of Civil Engineering, Brno University of Technology, 60200 Brno, Czech Republic
2 shared publications - Katarina Cakyova
Technical University of Košice
2 shared publications - Marian Vertal
Technical University of Košice
2 shared publications - Miloslav Novotný
Institute of Building Structures, Faculty of Civil Engineering, Brno University of Technology, Veveri 331/95, 602 00 Brno, Czech Republic
2 shared publications - Ondřej Nespěšný
Institute of Building Structures, Faculty of Civil Engineering, Brno University of Technology, 60200 Brno, Czech Republic
2 shared publications
Latest Publications
- 14 June 2025
- Published by Elsevier in Energy and Buildings
- Vol. 344
Thermal performance of two different green roofs throughout three winters in Slovakia
- 14 June 2025
- Published by Elsevier in Energy and Buildings
- Vol. 344
Thermal performance of two different green roofs throughout three winters in Slovakia
- Open Access
Experimental Loading of Staircase Made from Cement Fiber Boards with Cellulose Fibers Using Full-Scale Model
The study presents a possible innovative use of cement fiber boards (CFBs) reinforced with cellulose fibers for construction of an interior prefabricated staircase. Regarding the unusual use of traditional material that was used in all bearing elements of the staircase, a numerical simulation with the use of a material model SBETA was carried out and, subsequently, multiple experimental static loading was applied. In order to carry out experimental testing of static load capacity, a full-scale experiment method was chosen and performed on a real staircase structure for family houses. The full-scale experiment is considered the most precise method to test structures or material behavior. The obtained results show that the designed and tested staircase structure of CFBs is able to meet the requirements of technical standards related to static loading of staircases. The load test confirmed the potential use of cement fiber boards produced by the Hatschek process for real bearing structures under static loading.
Open AccessExperimental Loading of Staircase Made from Cement Fiber Boards with Cellulose Fibers Using Full-Scale Model
The study presents a possible innovative use of cement fiber boards (CFBs) reinforced with cellulose fibers for construction of an interior prefabricated staircase. Regarding the unusual use of traditional material that was used in all bearing elements of the staircase, a numerical simulation with the use of a material model SBETA was carried out and, subsequently, multiple experimental static loading was applied. In order to carry out experimental testing of static load capacity, a full-scale experiment method was chosen and performed on a real staircase structure for family houses. The full-scale experiment is considered the most precise method to test structures or material behavior. The obtained results show that the designed and tested staircase structure of CFBs is able to meet the requirements of technical standards related to static loading of staircases. The load test confirmed the potential use of cement fiber boards produced by the Hatschek process for real bearing structures under static loading.
- Open Access
- 21 October 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (21) , 11649
The Synergy of Living and Water Wall in Indoor Environment—Case Study in City of Brno, Czech Republic
The indoor environment that surrounds us and the elements in it affect not only our mood but also the air quality. Vegetation elements are currently more popular, especially for their aesthetic value but also because of the fact that they affect the physical parameters of the indoor environment such as temperature and humidity. Water elements are a similar example. The presented paper combines these two elements to achieve the best possible level of thermal comfort. Experimental verification of the influence of the living wall on air temperature and humidity took place during the heating season in the city of Brno in the space of the university, while three scenarios were created: the effect of the living wall in a semi-open space, an enclosed space, and a space with a water wall with regulated water temperature. The potential of the water wall is determined based on experimental verification in laboratory conditions. The results show that the synergy of the living and water wall in the indoor space may eliminate the risk of too-low humidity during the heating season.
- 21 October 2021
- Published by MDPI AG in Sustainability
- Vol. 13 (21) , 11649
Open AccessThe Synergy of Living and Water Wall in Indoor Environment—Case Study in City of Brno, Czech Republic
The indoor environment that surrounds us and the elements in it affect not only our mood but also the air quality. Vegetation elements are currently more popular, especially for their aesthetic value but also because of the fact that they affect the physical parameters of the indoor environment such as temperature and humidity. Water elements are a similar example. The presented paper combines these two elements to achieve the best possible level of thermal comfort. Experimental verification of the influence of the living wall on air temperature and humidity took place during the heating season in the city of Brno in the space of the university, while three scenarios were created: the effect of the living wall in a semi-open space, an enclosed space, and a space with a water wall with regulated water temperature. The potential of the water wall is determined based on experimental verification in laboratory conditions. The results show that the synergy of the living and water wall in the indoor space may eliminate the risk of too-low humidity during the heating season.
- 24 August 2021
- Published by Trans Tech Publications, Ltd. in Advances in Science and Technology
- Vol. 109, 9-14
Technical Measures for Limitation of Frost Depth in Soil
Renovation processes of existing buildings, including historically protected ones, are most of the time focused on energy saving. Nonetheless these processes might affect the function of existing shallow foundations. This paper deals with the influence of soils moisture content onto the depth of freezing. The depth of freezing depends on the type of soil as well, not just the moisture content. The influence of water and soils composition are generally perceived to be substantial for depth of freezing. Sub-zero temperatures do significantly change the soils characteristics, which has an effect to the building structure. The purpose of the research done by the personnel of Brno University of Technology was to determine the effects of special measures against frost penetration of soil. These measures included the application of various materials and solutions over the terrain in winter to monitor frost depth of soil.
- 24 August 2021
- Published by Trans Tech Publications, Ltd. in Advances in Science and Technology
- Vol. 109, 9-14
Technical Measures for Limitation of Frost Depth in Soil
Renovation processes of existing buildings, including historically protected ones, are most of the time focused on energy saving. Nonetheless these processes might affect the function of existing shallow foundations. This paper deals with the influence of soils moisture content onto the depth of freezing. The depth of freezing depends on the type of soil as well, not just the moisture content. The influence of water and soils composition are generally perceived to be substantial for depth of freezing. Sub-zero temperatures do significantly change the soils characteristics, which has an effect to the building structure. The purpose of the research done by the personnel of Brno University of Technology was to determine the effects of special measures against frost penetration of soil. These measures included the application of various materials and solutions over the terrain in winter to monitor frost depth of soil.
- 1 January 2013
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 649, 175-178
Thermal Stability of Attic Spaces with Integrated PCMs during the Climatic Year
This paper deals with the impact of using phase change materials (PCM) in light building constructions. It describes how these materials react during the whole year, how they impact the summer temperature stability of a room and how they react in the transition period and in the heating period. Measuring was carried out in the experimental and reference room in the attic of the Institute of Building Structures. The layout of these identical rooms enables to compare the measured values. The measuring of the indoor climate, which had been carried out during the whole year in the reference and experimental room, was analyzed. The analysis was used to create the basic methodological procedure for using PCM in light building constructions. These materials proved to be efficient in the summer time. During the heating period the power consumption was monitored in relation to the application of the phase change materials.
- 1 January 2013
- Published by Trans Tech Publications, Ltd. in Advanced Materials Research
- Vol. 649, 175-178
Thermal Stability of Attic Spaces with Integrated PCMs during the Climatic Year
This paper deals with the impact of using phase change materials (PCM) in light building constructions. It describes how these materials react during the whole year, how they impact the summer temperature stability of a room and how they react in the transition period and in the heating period. Measuring was carried out in the experimental and reference room in the attic of the Institute of Building Structures. The layout of these identical rooms enables to compare the measured values. The measuring of the indoor climate, which had been carried out during the whole year in the reference and experimental room, was analyzed. The analysis was used to create the basic methodological procedure for using PCM in light building constructions. These materials proved to be efficient in the summer time. During the heating period the power consumption was monitored in relation to the application of the phase change materials.