NSNelson Ramiro Gutiérrez Suquillo

Nelson Ramiro Gutiérrez Suquillo

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Nelson Ramiro Gutiérrez Suquillo has a total of 19 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • GENERACIÓN DE ENERGÍA ELÉCTRICA MEDIANTE MICROTURBINAS HIDRÁULICAS

    by Nelson Ramiro Gutiérrez Suquillo, Luis Miguel Sánchez Muyulema, Jonnathan Ismael Chamba Cruz, Guillermo Raúl Tumalli Naranjo

  • Proyectos de Arduino y Robótica Aplicada

    by Luis Miguel Sánchez Muyulema, Jonnathan Ismael Chamba Cruz, Christiam Xavier Núñez Zavala, Nelson Ramiro Gutiérrez Suquillo

    Proyectos de Arduino y Robótica Aplicada presenta una ruta académica y práctica para el diseño, construcción, programación, validación y mejora de sistemas robóticos orientados al aprendizaje tecnológico y la robótica competitiva. La obra articula fundamentos de electrónica, sistemas embebidos, sensores, actuadores, arquitectura de software, comunicaciones y control automático mediante proyectos progresivos basados principalmente en Arduino y ESP32. El lector desarrolla competencias para integrar hardware y software, seleccionar componentes, calibrar sensores, controlar motores, registrar información y evaluar el desempeño mediante procedimientos experimentales documentados. Los proyectos abarcan seguridad eléctrica, telemetría, seguimiento de línea, visión artificial, odometría, navegación, control PID, lógica difusa, registro de datos, análisis con Python y aprendizaje automático aplicado a robots reales. Cada propuesta vincula fundamentos teóricos con materiales, diseño electrónico, programación, pruebas, interpretación de resultados, identificación de errores y actividades de aprendizaje, favoreciendo una formación basada en evidencia. Dirigido a estudiantes, docentes, clubes de robótica y equipos de competencia, el libro promueve pensamiento ingenieril, experimentación sistemática, trabajo interdisciplinario y toma de decisiones técnicas. Su enfoque progresivo permite transformar módulos independientes en plataformas robóticas integradas, confiables, mantenibles y técnicamente documentadas para aplicaciones educativas, investigativas y competitivas de creciente complejidad y con criterios de seguridad, innovación, análisis crítico y mejora continua.

  • Control Design and Validation of Gait Analysis with the Robogait Mobile Robotic Platform

    by Diego Guffanti, Alberto Brunete, Miguel Hernando Gutierrez, David Álvarez, Nelson Gutiérrez

  • Open Access

    Comparison of Two System Identification Approaches for a Four-Wheel Differential Robot Based on Velocity Command Execution

    by Diego Guffanti, Moisés Filiberto Mora Murillo, Marco Alejandro Hinojosa, Santiago Bustamante Sanchez, Javier Oswaldo Obregón Gutiérrez, Nelson Gutiérrez, Miguel Sánchez

    Precise modeling of differential drive robots is crucial for effective control and trajectory planning in autonomous systems. A comparative analysis of two modeling approaches for a four-wheel differential drive robot is presented in this paper. The first approach, named Motor-Based Model (MBM), identifies four transfer functions, one for each motor, while the second approach, named Simplified Model (SM), uses only two transfer functions, one for linear velocity and another for angular velocity. Both models were validated by comparing their predicted trajectories against real odometry data obtained from a SLAM system implemented on a differential-drive robot. This provided a practical assessment of each model’s accuracy and underscored the importance of model selection in control design and navigation tasks. The results showed that the Motor-Based Model (MBM) consistently outperformed the Simplified Model (SM) in terms of odometry accuracy, both in position and orientation. Across all trajectories, the average RMSE for position using MBM was 0.309 m, while the SM recorded a higher average RMSE of 0.414 m. Similarly, the maximum position error averaged 0.522 m for MBM and 0.710 m for SM, confirming that MBM is more accurate and consistent in position tracking. Regarding the results of orientation estimation, when averaged across all experiments, the MBM maintained a lower angular RMSE of 0.170 rad in contrast to SM, which achieves an RMSE of 0.239 rad. The maximum angular error was also higher for the MBM at 0.316 rad, compared to 0.447 rad for the SM. Moreover, the computational performance evaluation indicated that the SM consistently outperformed MBM, achieving a 30% reduction in simulation time and substantially lower memory usage. These results demonstrate the relationship between model complexity and accuracy and suggest that the motor-specific model is more appropriate for applications requiring precise mapping or localization, such as SLAM, while the simplified model may be suitable for simpler use cases with lower computational requirements, such as embedded systems with limited resources. This paper provides a practical evaluation of the accuracy and computational performance of two modeling approaches, highlighting the implications of model selection for the design of navigation tasks.


  • Open Access

    Optimization of Fault Prediction by A.I. in Industrial Equipment: analysis of the operating parameters of a Bench Grinder

    by Nelson Ramiro Gutiérrez Suquillo, Jonnathan Ismael Chamba Cruz, Luis Miguel Sánchez Muyulema, Christiam Xavier Núñez, Rafael Christian Franco Reina

    Predictive Maintenance (PM) plays a crucial role in maximizing efficiency and reducing costs associated with equipment and system maintenance in industrial companies. Recent advancements in Machine Learning (ML) have revolutionized PM by offering accurate and efficient fault prediction and maintenance planning capabilities. This research focuses on monitoring a bench grinder and observing sensors for temperature, current, angular velocity, and vibration under normal operating conditions. The objective is to predict failures based on specific variables related to the machine. To develop the system, a prototype bench was designed to subject the machine to several working scenarios, collecting real-time sensor data. Data clusters were generated for each sensor, collecting 3000 samples over 7 consecutive days without faults and another 7 days with modified bench grinder behavior. Sampling was done at a rate of 1 second. The performance of Decision Trees (DT), Support Vector Machines (SVM), Naive Bayes (NB), and K-Means + Neural Network (NN) algorithms was compared using the confusion matrix metrics. Each algorithm's performance was evaluated for RPM, current, temperature, and vibrations measures. The SVM algorithm showed the highest error for RPM with 43.5%. In contrast, all algorithms achieved minimal or zero errors for vibrations, indicating excellent performance. These findings demonstrate the potential of ML algorithms in PM for the bench grinder. The results highlight the importance of selecting appropriate algorithms for specific measurements, with vibrations exhibiting the least error across all algorithms and contributes to optimize maintenance activities in industrial settings.

  • Open Access

    Application of Model-Based Design for Filtering sEMG Signals Using Wavelet Transform

    by Vladimir Bonilla Venegas, Guillermo Mosquera Canchingre, Miguel Sánchez Muyulema, Nelson Gutiérrez Suquillo, Jonnathan Ismael Chamba Cruz

    The aim of this study was the integration of model-based design and Wavelet transform techniques for filtering surface electromyography (sEMG) signals. In the first stage the noises and interferences that disturb sEMG signals were analyzed to implement a digital filter in a low-cost embedded system that filters these signals. It was shown that the noises and interferences are caused by various sources. Sources of interference and noise can be divided into internal and external. Internal noise is caused by the electrodes, EMG signals of other muscles, and noise associated with the functioning of other organs such as the heart or stomach. The external noises are due to the electrical environment, the most prominent of which is the direct interference of the power hum, produced by the incorrect grounding of other devices and electromotors. For the analysis of the digital filter, sEMG signals from the biceps muscle were used when the elbow joint was at rest and during flexion and extension movements. Signals from 10 participants who did not have any atrophies or pathologies in the muscle were considered for this stage. Denoising of sEMG signals was performed using different wavelets; the smallest error was observed when using the biorthogonal wavelet 3/5 of level 6 with the soft thresholding method. The wavelet filter was implemented using the V-model, and the Processor in The Loop (PIL) tests helped to determine the characteristics of the embedded system where the digital filter was implemented. The digital filter code was implemented on an ESP32 board due to its processing speed of 328 ms.

  • Open Access

    Diseño de Robot Móvil para tareas de Desminado Humanitario

    by Nelson Gutiérrez, David Espinoza

    En el presente trabajo se muestra el diseño de una plataforma móvil con desplazamiento automático para la detección de metales. El dispositivo tiene una geometría cuadrada con un área de 5 m2, el cual tiene la finalidad de ayudar a los especialistas para la detección de minas explosivas, reduciendo el tiempo de detección de explosivos y disminuyendo el riesgo de accidentes. La plataforma consta de cuatro columnas de apoyo, cada una tiene un sistema de poleas y cabrestantes que se sujetan a un actuador final mediante cordeles, donde se instala un sensor para la detección de elementos metálicos posicionado en sentido horizontal y paralelo al terreno, con movimiento en dos planos sin tocar el piso, reduciendo la posibilidad de detonación de una mina. También incluye un programa que genera una trayectoria de exploración del terreno para ubicar los metales de forma intuitiva, con un mecanismo de marcado por pintura aerosol. Para el diseño del sistema se utilizo la metodología en V lo que facilita el diseño concurrente


  • Open Access

    Análisis por el método de elementos finitos del comportamiento de las pastillas de freno ABS con base de acero y zinc discretizando el elemento continuo utilizando software CAE

    by Nelson Gutierrez, Alexy Fabian Vinueza Lozada

    En el presente trabajo se realizó el estudio del comportamiento de las pastillas de freno de un sistema ABS utilizando el método de análisis por elementos finitos. Este método esta basado en la transformación de un cuerpo de naturaleza continua en un modelo discreto aproximado, esta transformación se conoce como la discretización del modelo. Por esta razón, una de las acciones más críticas es la de realizar un mallado de calidad, de manera que esto permite mejorar la convergencia de resultados optimizando la carga computacional, lo cual posibilita que el problema pueda ser resuelto en un menor tiempo. El uso de herramientas de software para realizar este tipo de estudio tiene la ventaja de que en el pos procesamiento se puede escoger el tipo de parámetros que se quiere estudiar, en este caso se analizaron variables mecánicas y térmicas que permitieron caracterizar el comportamiento de los materiales de las pastillas. El estudio se efectuó para dos materiales: Trimat MN 1081 que está compuesto de acero y filamentos no ferrosos y Trimat GZC compuesto de fibras de zinc, de esta manera se obtuvieron características importantes de estos materiales, como son el esfuerzo, la deformación, penetración, flujo de calor y energía. En base al método desarrollado y a los resultados obtenidos, se realizará un estudio con materiales alternativos, lo cual permitirá determinar la viabilidad de usarlos en busca de obtener resultados óptimos tanto en características mecánicas como en costos.


  • Analysis by the Finite Element Method of the Behavior of the Brake Pads Using CAE Software

    by Alexy Fabian Vinueza Lozada, Nelson Ramiro Gutiérrez Suquillo

    The study of the behavior of the brake pads of an ABS breaking system with different materials was done through the Finite Element Analysis Method using software tools. The necessary steps to carry out the study were: determine the specifications, requirements and restrictions, type of analysis and physical variables to be studied as well as the mathematical model. From this information the modeling of the system, discretization (mesh), establishment of the boundary conditions and finally resolution of the problem, generation of results and Post processing were made. It is fundamental to realize a quality mesh so that this allows to improve the convergence of results by optimizing the computational load so that the problem can be solved. One of the most useful questions of this method is that in the post-processing stage, figures, curves and tables can be generated providing a wide range of results, the person doing the study determining which is the most relevant information for each case. In this work, temperature, heat flow, stress, strain and energy dissipated by the braking process were obtained.

  • Open Access

    Diseño y construcción de un prototipo para la extracción continua de aceite de la semilla Sacha Inchi con un proceso de prensado en frío

    by Nelson Ramiro Gutiérrez Suquillo, Irene Alexandra Saá Arévalo, Alexy Fabián Vinueza Lozada

    Este trabajo presenta el diseño de un extractor de aceite a partir de la semilla de Sacha Inchi a través de un mecanismo de tornillo extrusor, permite alcanzar un rendimiento máximo del 34% mediante un proceso continuo de extracción en frío con temperaturas de trabajo inferiores a 45 °C. La temperatura es un parámetro crítico ya que al superar los 50 °C, el aceite disminuye su valor alimenticio, por la pérdida de sus propiedades más importantes como son: el contenido de Omega 3 (48%), Omega 6 (36%), Omega 9 (8%), digestibilidad (96%), vitamina A y E. La metodología utilizada para el desarrollo de trabajo fue la de diseño concurrente y simultaneo de acuerdo a las recomendaciones de National Instruments. El prototipo implementado está compuesto por un tornillo extrusor, un dado de presión, cámara de alimentación, tamiz y filtro. La ventaja del diseño modular es su flexibilidad, por lo que, al cambiar determinados componentes es posible utilizar el prototipo para extraer aceite de diferentes tipos y tamaños de semillas. Los productos resultantes son: 33.34% de aceite y un residuo solido conocido como Torta en un 66.66% que tiene muchas aplicaciones en el campo de la alimentación humana y de mascotas. Debido a que se está procesando un producto alimenticio se tomó en cuenta los requerimientos de la Norma ISO 22005 para el diseño y la implementación del prototipo.