MMMadhu Bilugali Mahadevaswamy

Madhu Bilugali Mahadevaswamy

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Madhu Bilugali Mahadevaswamy has a total of 26 co-authors. Here are the top co-authors by number of shared publications:

  • Rashmi Aradhya

    Department of Electrical and Electronics Engineering Siddaganga Institute of Technology Tumakuru Karnataka India

    13 shared publications
  • Sundara Rajan Jagannathan

    Department of Electrical and Electronics Engineering, Siddaganga Institute of Technology, Tumakuru, Karnataka, India

    6 shared publications
  • R. R. N. Sailaja

    The Energy and Resources Institute, Southern Regional Centre, Bangalore, Karnataka, India

    3 shared publications
  • Rashmi

    Dept of Electrical & Electronics Engineering, VTU Research center, Siddaganga Institute of Technology, Tumakuru, Karnataka, India

    3 shared publications
  • Rashmi Aradhya

    Department of Electrical and Electronics Engineering, Siddaganga Institute of Technology, Tumakuru, Karnataka, India

    2 shared publications
  • Rashmi Balasubramanya

    Department of Electrical and Electronics Engineering Siddaganga Institute of Technology B.H. Road Tumakuru Karnataka 572103 India

    2 shared publications

Latest Publications

  • Electrical Percolation in Hybrid Carbon‐Filled Glass Fiber–Epoxy Composites: Microstructural and Spectroscopic Correlation

    by Madhu Bilugali Mahadevaswamy, Anand Raj Shetru Nagarajappa, Praveen Kumar Yaliyur Giriraju, Rashmi Aradhya

    Electrical percolation in polymer composites loaded with carbon nanofillers depends on the dispersion, distribution, and interconnections of conductive fillers. But the results of dispersion studies and electrical data are seldom interpreted in relation to each other. The present study establishes a connection between electron microscopy, X‐ray diffraction, optical and IR spectroscopic analysis and electrical characteristics of glass‐fiber/epoxy nanocomposites: an unmodified reference (EG), an aluminium‐trihydrate‐modified system (EGA), a hybrid carbon‐nanotube/nanoplatelets system (EGH), and a combined hybrid‐filler‐plus‐trihydrate system (EGAH). Scanning electron microscopy provides images of fine non‐agglomerated filler dispersion with strong fiber‐matrix adhesion in hybrid nanocomposites. X‐ray diffraction reveals the loss of sharp reflection peaks for nanotubes and nanoplatelets in hybrid systems EGH and EGAH, attenuation of the MWCNT and GNP reflections, consistent with fine dispersion. Optical spectroscopic analysis proves that the value of the band gap decreases from 3.05–3.10 eV to 2.68–2.95 eV while the IR spectrum confirms the unchanged structure of the matrix. AC electrical conductivity (from 10 Hz to 2 MHz) reveals a frequency independent plateau (1.6–1.8 × 10 −2 and 2.7–5.9 × 10 −3 S/m) in EGH and EGAH, which is 4–5 orders of magnitude higher than in EG and EGA (10 −7 –10 −5 S/m) accompanied by a higher low‐frequency dielectric permittivity enhancement characteristic of a percolated network. Characteristic results observed provide consistent description for the transition from dielectric to electrically conductive behavior in the hybrid MWCNT/GNP‐filled glass‐fiber/epoxy composites.

  • Performance Enhancement of Epoxy Glass Fiber Cores of HTLS Conductors Using Carbon Nanofillers/ATH Additives

    by Madhu Bilugali Mahadevaswany, Rashmi Aradhya, Anandraj Shetru Nagarajappa

    Epoxy glass fiber nanocomposites reinforced with carbon nanofillers have garnered significant attention due to their improved functional capabilities, making them a desirable choice for an array of applications. This study investigates the effect of graphene and multi‐walled carbon nanotubes combined with aluminum trihydrate fillers on the mechanical and thermal performance of epoxy glass fiber cores used in high temperature low sag conductors. The inclusion of aluminum trihydrate and nanofillers significantly enhanced the properties of the composite, as evidenced by a reduction in the coefficient of linear expansion from 2.99 × 10 − 6 to 2.05 × 10 − 6 , improved dimensional stability, and increased density from 2.2 to 2.24 g/cm 3 . Thermal endurance tests at 150°C and 200°C for 1 and 2 h demonstrated negligible discoloration and no cracking in aluminum trihydrate (ATH) ‐modified cores, while cores without ATH exhibited cracking under prolonged exposure. Mechanical testing revealed a substantial improvement in ultimate tensile strength (UTS) from 32.17 kN (400.18 MPa) to 67.68 kN (839.01 MPa), an increase in the glass transition temperature (T g ) from 119°C to 133.65°C, and enhanced flexural strength from 61.82 to 73.31 MPa. These results highlight the superior thermal and mechanical performance of epoxy glass fiber cores reinforced with carbon nanofillers and ATH, making them suitable for high‐temperature, high‐stress applications in high‐temperature low‐sag (HTLS) conductors. Further studies are needed to investigate long‐term aging effects and optimize these composites for extended service life.

  • Development of PLA‐ZnO Nanocomposites for Food Packaging Applications

    by Rashmi Aradhya, Lalithamba H.S., Madhu B.M., Sheshashayan, Pramath S.

    Vegetables and fruits are widely consumed and highly perishable commodities, developing effective packaging materials essential to extend their shelf life while maintaining quality and safety. A Packing material with excellent tensile strength is eco‐friendly, non‐toxic, and better alternative to polyethylene material. The present work explores the utilization of zinc oxide (ZnO) nanoparticles embedded within Polylactic Acid (PLA) as an innovative packaging material. The PLA is used in a wide range of applications, such as health care, implants, memory devices, food packaging, and tissue engineering, because it is biodegradable in nature. The addition of ZnO into PLA enhances electrical, mechanical, anti‐UV, and antibacterial properties. The PLA‐ZnO composites were prepared by the solution‐blending method. The Tensile strength and modulus of PLA‐ZnO nanocomposites increase as compared with the virgin PLA. The results from electrical properties exhibit a significant enhancement in dielectric constant and a decrease in dissipation factor of the nanocomposite. In addition, antibacterial results show that the prepared nanocomposite films exhibit strong antimicrobial ability at very low ZnO addition. The results demonstrate that the novel nanocomposites could be a good candidate material for food packaging applications.


  • Investigating Percolative AC Conductivity in Hybrid Carbon-Epoxy Composites Through Electrical and Optical Techniques

    by B. M. Madhu, Rashmi, P. Suma

    Carbon nanoparticle reinforced polymer nanocomposites have emerged as promising multifunctional materials due to their enhanced unique functional properties. In this study, hybrid epoxy–glass fiber nanocomposites incorporating multiwalled carbon nanotubes and graphene nanoplatelets were fabricated using a scalable pultrusion technique with varying nanofiller loadings. The AC electrical conductivity was evaluated over a wide frequency range of 10 Hz–8 MHz, while optical characteristics were investigated using UV–Vis spectroscopy and X-ray diffraction analysis. The influence of carbon nanofillers on AC conductivity, absorption coefficient, and optical band gap energy was systematically examined. The AC conductivity followed classical percolation theory, revealing a percolation threshold of 1 wt.% for hybrid nanofillers, lower than individual fillers, indicating a strong synergistic effect. The formation of an interconnected three-dimensional conductive network significantly enhanced conductivity from the insulating regime (~10⁻⁷ S/m) to 1.86 S/m at 1 kHz, corresponding to an improvement of nearly six orders of magnitude. Frequency-independent conductivity plateaus at low frequencies suggested semiconducting behavior consistent with Jonscher’s power law. Optical studies demonstrated a concentration-dependent change in absorption coefficient and a red shift in the absorption edge with increasing nanofiller content. Tauc analysis showed a reduction in optical band gap energy from 3.1 eV for pristine epoxy to 2.95 eV for hybrid systems, attributed to defect-induced localized states and improved charge transport pathways. XRD results confirmed the predominantly amorphous nature of epoxy matrix with characteristic graphene-related diffraction peaks. The UV-Vis spectra show a significant shift in the absorption peak with increasing concentration of carbon nanoparticles. The findings of this study have implications for the development of novel nanocomposites with enhanced performance for a variety of applications, including electronics and energy storage.


  • Electrical and Thermal Properties of Boron Nitride Filled Poly Aryl Ether Ketone Composites for Electrical Insulation Applications

    by Rashmi Aradhya, B. M. Madhu

    Poly(aryl ether ketone) (PAEK) composites incorporating boron nitride (BN) fillers at varying loadings of 10, 20, and 30 wt.% were fabricated and systematically examined for their dielectric and thermal performance, targeting electrical insulation applications. The impact of BN content on the microstructural features, thermal transport, and electrical characteristics of the composites was analyzed. Scanning electron microscopy (SEM) was employed to study the filler dispersion within the PAEK matrix. At higher filler loadings, BN particles with smaller sizes exhibited noticeable agglomeration, whereas larger BN particles demonstrated more uniform distribution throughout the matrix. Composites reinforced with larger BN particles exhibited greater enhancement in thermal conductivity. The dielectric constant ( ε r ) exhibited a progressive rise with increasing BN content, while the dissipation factor (tan δ ) initially decreased up to 10 wt.% loading and showed a slight rise thereafter up to 20 wt.%. A maximum improvement of approximately 34% in dielectric strength was recorded at 30 wt.% BN relative to PAEK. Across the temperature range of 30°C to 230°C, the dissipation factor and electrical conductivity were observed in the ranges of 0.001–0.310 and 3.0 × 10 −11 to 0.5 × 10 −16 S/cm, respectively. The composite containing 30 wt.% BN exhibited a substantial increase in thermal conductivity, rising from 0.3 to 0.6 W/m K, alongside superior dielectric properties ( ε r ≈5.5 and tan δ ≈0.01) and lower volatile content. These findings highlight the potential of BN‐filled PAEK systems as promising candidates for electrical insulation in winding systems, rotating machines, and cable sheathing applications.


  • Thermal Aging Analysis and Predictive Modeling of Epoxy Nanocomposites Characteristics

    by Madhu B. M., Rashmi Aradhya, Suma P.

    This study investigates the thermal aging of glass fiber reinforced epoxy nanocomposites, focusing on chemical degradation mechanisms and the mitigating role of thermal conductivity for high‐temperature low‐sag conductor core applications. Composites with hybrid nanofillers containing multiwalled carbon nanotubes, graphene nanoplatelets, and aluminum trihydrate were aged at 120°C and 160°C for 3000 h. Thermal aging induced chemical degradation, with a 10‐fold increase in oxidation rate at 160°C due to chain scission. Carbonyl formation and hydroperoxide intermediates were formed in the composites. Tensile strength reduction of 8.6% in base composites is observed compared to 6.5% in the nanocomposite with hybrid nanofillers. Hybrid nanofillers reduce degradation by limiting oxygen diffusion, cooling the matrix, and stabilizing T g , outperforming literature‐reported reductions of 7%–12% for similar composites. Thermal conductivity, modeled using Maxwell–Garnett, shows an enhancement of 40%–60% with nanofiller content and 10%–20% in the Bruggeman model. This slows heat diffusion, further mitigating aging. Transient heat flow analysis confirmed a 20%–30% longer diffusion time enhancing thermal stability. The nanocomposite retained 474.56 MPa tensile strength post‐aging, meeting high‐temperature low‐sag (HTLS) conductor standards. These findings elucidate the interplay between thermal aging, chemical degradation, and thermal conductivity, highlighting the potential of hybrid nanofillers for durable HTLS applications.


  • Low frequency dielectric analysis for understanding water absorption characteristics of epoxy nanocomposites

    by Rashmi Aradhya, B. M. Madhu, J. Sundara Rajan

    Nanocomposites are versatile multifunctional engineering materials. For electrical applications, diminishing water diffusion and optimization of electrical properties are challenging. Low frequency dielectric measurements are preferred for the assessment of water diffusion because of the dominant low frequency response in the presence of water. Epoxy composites with organically modified montmorillonite of 2, 5, and 7 wt% are investigated. Filler at 5 wt% is observed to be optimal, with a 28% reduction in the diffusion coefficient. Higher filler content decreases the real permittivity due to interfacial polarization, and water diffusion for 240 h reveals minimal filler dependence of real permittivity. The relaxation peak of imaginary permittivity occurs at 0.08 Hz at 5 wt%, and at higher frequencies in other composites due to changes in the filler matrix interactions and electrical conductivity. Water diffusion tends to decrease imaginary permittivity. AC conductivity is not influenced by the filler and it ranges from 10 −10 to 10 −9 S/m over 10 −4 Hz–1 kHz, and its variations with water diffusion at lower frequencies are not significant. The differences in the nanocomposites are confirmed using FTIR analysis. The multi‐core water shell model is correlated to the variations observed in the dielectric properties of the nanocomposites. The utility of low frequency dielectric analysis is demonstrated for the assessment of water diffusion. Key application areas of low frequency dielectric analysis are the estimation of water diffusion mechanisms and it is an enabler of the development of data analytics using machine learning for improving the quality of nanocomposites. Highlights: 5 wt% OMMT addition offers optimal water barrier performance in epoxy composites. Surface‐modified OMMT enhances filler distribution and interfacial adhesion. Dielectric loss peaks shift to 0.08 Hz at 5 wt% filler content. AC conductivity remains stable at 10 −10 –10 −9 S/m across frequencies. Low‐frequency dielectric analysis accurately models water absorption.


  • Development and Characterization of Ethylene‐Vinyl Acetate‐Graphene Nanocomposites

    by Madhu Bilugali Mahadevaswamy, Rashmi Balasubramanya

    The prospective applications of carbon graphene nanoplatelets (GNPs) reinforced ethylene vinyl acetate (EVA) nanocomposites in flexible electronics, energy storage devices, and thermal management systems have attracted a lot of attention. These nanocomposites offer an effective solution for enhancing the electrical conductivity of interfacing materials in electronic systems and addressing issues related to thermal management. GNPs that possess excellent thermal conductivity of 2000–4000 W m−1 K−1 and an electrical conductivity of 107 S m−1 are utilized in this investigation. The homogeneous dispersion of nanofiller and the effective load transfer between components through strong filler/polymer interfacial interactions are essential for the creation of multifunctional polymer nanocomposites. Particularly, their electrical conductivity and dielectric properties are highlighted in this study, with an emphasis on the synthesis and characterization of nanocomposite materials. This work investigates the utilization of graphene nanocomposites in EVA using a melt‐mixing technique assisted by sonication to fabricate multifunctional composites. Incorporating different weight percentages of GNPs (ranging from 0.1 to 0.4 wt.%) within the polymer matrix is carried out. In the present study, the nanocomposites are characterized by scanning electron microscopy investigation and impedance spectrum analysis. The distinctive characteristics of the AC electrical transport in nanocomposites are investigated between 10 Hz and 1 MHz. Excellent interfacial compatibility has been demonstrated by the homogenous distribution of GNPs within the matrix, confirmed by SEM examination. These EVA nanocomposites demonstrate improved electrical conductivity, thereby rendering them very useful for energy storage applications, such as electronic capacitors, wherein supports with a significant dielectric constant and minimal dielectric loss are required.