R. R. N. Sailaja
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Previous Organizations / Institutes
The organizations / institutes from the scholar's other articles in the past ten years
R. R. N. Sailaja has a total of 27 co-authors. Here are the top co-authors by number of shared publications:
M. Ameen Khan
The Energy and Resources Institute (TERI),SRC,Bangalore,India
4 shared publications- Madhu Bilugali Mahadevaswamy
Department of Electrical and Electronics Engineering Siddaganga Institute of Technology Tumakuru Karnataka India
3 shared publications - Sundara Rajan Jagannathan
Department of Electrical and Electronics Engineering, Siddaganga Institute of Technology, Tumakuru, Karnataka, India
3 shared publications A. Ashamol
The Energy and Resources Institute, Domlur 2nd Stage , Bangalore , India
2 shared publicationsM. V. Deepthi
2 shared publicationsPratik Roy
The Energy and Resources Institute, 4th Main, 2nd Cross, Domlur II stage, Bangalore 560071, India
2 shared publications
Latest Publications
- 16 November 2023
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 32 (4) , 318-328
An insight into the effect of carbon nanofillers in glass fibre epoxy nanocomposites through dielectric spectroscopy
- 16 November 2023
- Published by Taylor & Francis in Fullerenes, Nanotubes and Carbon Nanostructures
- Vol. 32 (4) , 318-328
An insight into the effect of carbon nanofillers in glass fibre epoxy nanocomposites through dielectric spectroscopy
- 23 April 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (26)
Effect of hybrid carbon nanofillers at percolation on electrical and mechanical properties of glass fiber reinforced epoxy
Multi walled carbon nanotubes and graphene nanoplatelets are novel fillers possessing exceptional intrinsic characteristics, such as high aspect ratio, strength, and good compatibility. These fillers are integrated into a glass fiber reinforced epoxy using a pultrusion process with a mixing ratio of 2:3 to attain the synergetic effect. The electrical and mechanical properties of the composites containing combinations of multi walled carbon nanotubes (0.4 wt%), graphene nanoplatelets (0.6 wt%) and micron aluminum trihydrate (2 wt%) fillers is studied. Significant improvement in electrical and mechanical properties is achieved. This study reveals that the incorporation of hybrid carbon nanofillers into epoxy leads to improved dielectric constant, AC conductivity and mechanical properties as compared with the base epoxy composite with glass reinforcement. The AC conductivity increases from 10−9 to 10−1 S/m and dielectric constant from 3.6 to 100 due to carbon fillers. The mean tensile strength improves from 433 MPa of the base epoxy composite to 508 MPa in carbon‐filled composite. The compressive strength improves from 630 to 681 MPa due to incorporation of carbon fillers signifying the improvement in load transfer effectiveness. The effect of carbon fillers on the flexural strength and hardness is minimal. The experimental data on mechanical parameters have been validated using theoretical modeling and a good correlation is established.
- 23 April 2022
- Published by Wiley in Journal of Applied Polymer Science
- Vol. 139 (26)
Effect of hybrid carbon nanofillers at percolation on electrical and mechanical properties of glass fiber reinforced epoxy
Multi walled carbon nanotubes and graphene nanoplatelets are novel fillers possessing exceptional intrinsic characteristics, such as high aspect ratio, strength, and good compatibility. These fillers are integrated into a glass fiber reinforced epoxy using a pultrusion process with a mixing ratio of 2:3 to attain the synergetic effect. The electrical and mechanical properties of the composites containing combinations of multi walled carbon nanotubes (0.4 wt%), graphene nanoplatelets (0.6 wt%) and micron aluminum trihydrate (2 wt%) fillers is studied. Significant improvement in electrical and mechanical properties is achieved. This study reveals that the incorporation of hybrid carbon nanofillers into epoxy leads to improved dielectric constant, AC conductivity and mechanical properties as compared with the base epoxy composite with glass reinforcement. The AC conductivity increases from 10−9 to 10−1 S/m and dielectric constant from 3.6 to 100 due to carbon fillers. The mean tensile strength improves from 433 MPa of the base epoxy composite to 508 MPa in carbon‐filled composite. The compressive strength improves from 630 to 681 MPa due to incorporation of carbon fillers signifying the improvement in load transfer effectiveness. The effect of carbon fillers on the flexural strength and hardness is minimal. The experimental data on mechanical parameters have been validated using theoretical modeling and a good correlation is established.
- 15 December 2021
- Published by Wiley in Polymer Composites
- Vol. 43 (3) , 1343-1356
Combined effect of multiwalled carbon nanotubes, graphene nanoplatelets, and aluminum trihydride on the thermal stability of epoxy composites
Glass fiber reinforced epoxy matrix is modified with a hybrid combination of fillers, and composites were fabricated using the advanced pultrusion technique. The focus of the investigation was to comprehensively understand the synergy between the carbon nanofillers and the role of aluminum trihydride on the thermal characteristics. A ratio of 2 wt% of multiwalled carbon nanotubes and 3 wt% of graphene is established by prior optimization technique for improved thermal properties. Using X‐ray diffraction analysis, the presence of the two carbon fillers was confirmed. Aluminum trihydrate was incorporated in the epoxy matrix with the objective of improving the thermal properties. By thermogravimetric analysis and differential scanning calorimetry, assessment of the thermal properties of the composites has been undertaken. The use of the two carbon fillers leads to enhancement of the thermal properties and contrary to expectations, the composites with hybrid fillers undergo minimal degradation due to pyrolysis. Uniform dispersion of the nanoparticles and good interfacial bonding of fillers with the epoxy are observed to be critical for the enhancement of thermal properties. The ratio of the two carbon fillers used helps in their preferential alignment and hence significant improvements in thermal properties are observed. Glass transition temperature reveals a 13°C increase increases due to the inclusion of carbon nanofillers and aluminum trihydride.
- 15 December 2021
- Published by Wiley in Polymer Composites
- Vol. 43 (3) , 1343-1356
Combined effect of multiwalled carbon nanotubes, graphene nanoplatelets, and aluminum trihydride on the thermal stability of epoxy composites
Glass fiber reinforced epoxy matrix is modified with a hybrid combination of fillers, and composites were fabricated using the advanced pultrusion technique. The focus of the investigation was to comprehensively understand the synergy between the carbon nanofillers and the role of aluminum trihydride on the thermal characteristics. A ratio of 2 wt% of multiwalled carbon nanotubes and 3 wt% of graphene is established by prior optimization technique for improved thermal properties. Using X‐ray diffraction analysis, the presence of the two carbon fillers was confirmed. Aluminum trihydrate was incorporated in the epoxy matrix with the objective of improving the thermal properties. By thermogravimetric analysis and differential scanning calorimetry, assessment of the thermal properties of the composites has been undertaken. The use of the two carbon fillers leads to enhancement of the thermal properties and contrary to expectations, the composites with hybrid fillers undergo minimal degradation due to pyrolysis. Uniform dispersion of the nanoparticles and good interfacial bonding of fillers with the epoxy are observed to be critical for the enhancement of thermal properties. The ratio of the two carbon fillers used helps in their preferential alignment and hence significant improvements in thermal properties are observed. Glass transition temperature reveals a 13°C increase increases due to the inclusion of carbon nanofillers and aluminum trihydride.
- 15 September 2017
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 26 (10) , 765-773
Reinforcement of polymethyl methacrylate with silane-treated zinc oxide nanoparticles: fire retardancy, electrical and mechanical properties
- 15 September 2017
- Published by Springer Nature in Iranian Polymer Journal
- Vol. 26 (10) , 765-773
Reinforcement of polymethyl methacrylate with silane-treated zinc oxide nanoparticles: fire retardancy, electrical and mechanical properties
- 10 April 2017
- Published by Wiley in Polymer Composites
- Vol. 39 (S3) , E1474-E1486
Nanocomposites of HDPE/LDPE/Nylon 6 reinforced with MWCNT, Kenaf fiber, nano Mg(OH)2, and PEPA with enhanced mechanical, thermal, and flammability characteristics
The aim of this study was to investigate the effect of combination of magnesium hydroxide (Mg(OH)2) and Multiwall Carbon Nanotubes (MWCNT) on the thermal, flammable, and mechanical properties of ternary blends (High density polyethylene/Low density polyethylene/Nylon). Kenaf fiber has also been added for reinforcement. For ternary blend it is found that the tensile strength value was increased by 50% at 0.5/0.5 wt% loading of Mg(OH)2/MWCNT as compared to composite without filler. The improvement in tensile strength was also significant from scanning electron microscope micrographs and also assessed using predictive theories. The cone calorimeter studies showed lowered peak heat release rate with addition of MWCNT/Mg(OH)2. It also promoted char formation and thus improved flame retardancy of the nanocomposites. These composites have a potential for application as high performance fire retardant composites by recycling mixed plastic waste. POLYM. COMPOS., 39:E1474–E1486, 2018. © 2017 Society of Plastics Engineers
- 10 April 2017
- Published by Wiley in Polymer Composites
- Vol. 39 (S3) , E1474-E1486
Nanocomposites of HDPE/LDPE/Nylon 6 reinforced with MWCNT, Kenaf fiber, nano Mg(OH)2, and PEPA with enhanced mechanical, thermal, and flammability characteristics
The aim of this study was to investigate the effect of combination of magnesium hydroxide (Mg(OH)2) and Multiwall Carbon Nanotubes (MWCNT) on the thermal, flammable, and mechanical properties of ternary blends (High density polyethylene/Low density polyethylene/Nylon). Kenaf fiber has also been added for reinforcement. For ternary blend it is found that the tensile strength value was increased by 50% at 0.5/0.5 wt% loading of Mg(OH)2/MWCNT as compared to composite without filler. The improvement in tensile strength was also significant from scanning electron microscope micrographs and also assessed using predictive theories. The cone calorimeter studies showed lowered peak heat release rate with addition of MWCNT/Mg(OH)2. It also promoted char formation and thus improved flame retardancy of the nanocomposites. These composites have a potential for application as high performance fire retardant composites by recycling mixed plastic waste. POLYM. COMPOS., 39:E1474–E1486, 2018. © 2017 Society of Plastics Engineers
- 14 December 2016
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 56 (7) , 762-776
Fire Retardancy Characteristics and Mechanical Properties of High-Density Polyethylene/Ultrafine Fly Ash/MWCNT Nanocomposites
Nanocomposites of high-density polyethylene along with ultrafine fly ash and acid-functionalized multiwalled carbon nanotubes have been developed. To enhance the interfacial adhesion, an epoxy-functionalized high-density polyethylene has been added, while the ultrafine fly ash has been surface modified using aminosilane-coupling agent. Improvement in mechanical properties using both ultrafine fly ash/multiwalled carbon nanotubes was seen and was further analyzed using micromechanical models. The addition of ultrafine fly ash and multiwalled carbon nanotubes together exhibited synergism leading to lowering of peak heat release rate. The nanocomposites showed enhanced thermal stability and lowered crystallinity percentage values of the high-density polyethylene phase due to improved interfacial interactions.
- 14 December 2016
- Published by Taylor & Francis in Polymer-Plastics Technology and Engineering
- Vol. 56 (7) , 762-776
Fire Retardancy Characteristics and Mechanical Properties of High-Density Polyethylene/Ultrafine Fly Ash/MWCNT Nanocomposites
Nanocomposites of high-density polyethylene along with ultrafine fly ash and acid-functionalized multiwalled carbon nanotubes have been developed. To enhance the interfacial adhesion, an epoxy-functionalized high-density polyethylene has been added, while the ultrafine fly ash has been surface modified using aminosilane-coupling agent. Improvement in mechanical properties using both ultrafine fly ash/multiwalled carbon nanotubes was seen and was further analyzed using micromechanical models. The addition of ultrafine fly ash and multiwalled carbon nanotubes together exhibited synergism leading to lowering of peak heat release rate. The nanocomposites showed enhanced thermal stability and lowered crystallinity percentage values of the high-density polyethylene phase due to improved interfacial interactions.
- 6 August 2015
- Published by Wiley in Polymer Composites
- Vol. 38 (6) , 1043-1052
Mechanical and flammability characteristics of PC/ABS composites loaded with flyash cenospheres and multiwalled carbon nanotubes
PC/ABS nanocomposites have been developed using a mixture of acid functionalized multiwalled carbon nanotubes (f‐MWCNT) and aminoproply triethoxysilane‐treated cenospheres. The mechanical and flammability characteristics have been determined as per ASTM standards. The addition of a small quantity (∼1%) of MWCNT further enhanced the compressive strength by 70% while the compressive modulus doubled. The use of macrofiller in combination with the nanofillers led to synergism as observed by reduction of mean heat release rates for these composites. The formation of char residues and a uniform char layer has also been observed by thermogravimetric analysis and cone calorimetry. Both fillers were surface treated which in turn led to improved interfacial adhesion as analyzed by micromechanical models. POLYM. COMPOS., 38:1043–1052, 2017. © 2015 Society of Plastics Engineers
- 6 August 2015
- Published by Wiley in Polymer Composites
- Vol. 38 (6) , 1043-1052
Mechanical and flammability characteristics of PC/ABS composites loaded with flyash cenospheres and multiwalled carbon nanotubes
PC/ABS nanocomposites have been developed using a mixture of acid functionalized multiwalled carbon nanotubes (f‐MWCNT) and aminoproply triethoxysilane‐treated cenospheres. The mechanical and flammability characteristics have been determined as per ASTM standards. The addition of a small quantity (∼1%) of MWCNT further enhanced the compressive strength by 70% while the compressive modulus doubled. The use of macrofiller in combination with the nanofillers led to synergism as observed by reduction of mean heat release rates for these composites. The formation of char residues and a uniform char layer has also been observed by thermogravimetric analysis and cone calorimetry. Both fillers were surface treated which in turn led to improved interfacial adhesion as analyzed by micromechanical models. POLYM. COMPOS., 38:1043–1052, 2017. © 2015 Society of Plastics Engineers