OKOleksiy Kozachenko

Oleksiy Kozachenko

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article

Previous Organizations / Institutes

The organizations / institutes from the scholar's other articles in the past ten years


Oleksiy Kozachenko has a total of 29 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Open Access

    Substantiation of the Design and Operating Parameters of a Vibro-Friction Separator with a Preliminary Separation Device for Small-Seeded Oil Crops

    by Oleksii Kozachenko, Elchyn Aliiev, Yevgeniy Pikh, Andrii Pakhuchyi, Anatolii Mykhailov, Olha Siniaieva, Oleksandr Kozii, Hennadii Tesliuk

    The article presents the scientific results on the design and operating parameters of a vibro-friction separator for separating small-seeded oil crops. The relevance of the study is in the complexity of cleaning and fractionating small-seeded crops, whose physical and mechanical properties exhibit considerable variability in shape, size, mass, elasticity, and friction. The use of vibro-friction separation enables differences in these properties; however, its efficiency largely depends on how the material is fed onto the working surfaces. The study aims to improve the separation efficiency of small-seed mixtures by substantiating the design and operating parameters of a vibro-friction separator equipped with a preliminary separation device. A separator design incorporating a screw feeder was proposed, in which the working surfaces provided a preliminary spatial distribution of the seed mixture components based on their physical and mechanical properties. Numerical simulation and experimental methods were employed to investigate the separation process. The effects of vibration amplitude and frequency, as well as the directional, longitudinal, and transverse inclination angles of the working surface, on separation quality, throughput, and power consumption were determined. Based on the research results, second-order mathematical models were developed to describe relationships between the main process performance indicators and the design and operating factors. The effects of these factors were found to be nonlinear, with interactions occurring between individual factors. Comparison of the numerical simulation and experimental results confirmed the consistency of the main patterns governing the motion and separation of the seed mixture. Rational parameters were determined using a multi-criteria approach that considered separation quality, throughput, and energy consumption. For the basic separator design, a separation quality of 87.4 %, a throughput of 264 kg/h, and a power consumption of 0.95 kW were obtained, whereas the design incorporating preliminary separation achieved 92.5 %, 282 kg/h, and 1.04 kW, respectively. The practical significance of the study is in substantiating the design and operating parameters of the vibro-friction separator, thereby improving the quality and throughput of the separation process for small-seeded oil crops.

  • Open Access

    Multi-Criteria Optimization of Disk Tillage Implements with Adjustable Elastic Shanks by Substantiating Design and Operating Parameters

    by Oleksii Kozachenko, Elchyn Aliiev, Serhii Dyakonov, Andrii Pakhuchyi, Oleksandr Volkovskii, Pavlo Luts

    The research presents numerical and experimental investigations of a disk working element mounted on an elastic shank with a stiffness regulator. Using numerical simulation in SolidWorks, the distributions of stresses and deformations in the shank, their amplitude-frequency characteristics, and the influence of geometric parameters and disk orientation angles on system performance were determined. The analysis showed that the maximum absolute deformations at the disk attachment point and frame connection vary between 0.12 and 0.38 mm, while the maximum stresses in the shank and stiffness regulator range from 85 to 240 MPa, depending on design parameters. The optimal shank parameters ensured vibration stability in different directions and effective interaction between the disk and the soil, minimizing energy consumption and providing uniform surface tillage. Experimental tests conducted in a soil bin confirmed the patterns of variation in the draft force acting on the frame and on individual points of the shank, the vibration frequency of the working element, and soil compaction depending on the disk penetration depth, the travel speed of the implement, and the angle of the wedge-shaped insert. The results enabled the determination of rational operating parameters for the disk element that achieve an optimal balance between energy efficiency, stability of dynamic regimes, and soil tillage quality. The frame draft force varied in the range of 430–780 N, while local forces at the shank reached 310–690 N and 280–640 N, respectively. The vibration frequency of the working element was observed within 50–63 Hz. The results showed that the soil compaction coefficient ranged from 0.44 to 0.72, with a reduction of up to 39 % under optimal conditions. Overall, the proposed methodology combines numerical modeling with full-scale experiments, enabling comprehensive optimization of the design and technological characteristics of disk implements. The use of adjustable elastic shanks increases soil tillage efficiency, reduces draft resistance, and improves soil structure formation, making the proposed design suitable for modern resource-saving agricultural technologies.

  • The Movement of the Seed Mixture Along the Screw Surface of the Feeder of the Vibro-Friction Separator

    by Oleksiy Kozachenko, Elchyn Aliiev, Yevhenii Pikh

    The work involves physical and mathematical modeling of the process of seed mixture movement along a designed helical surface of a feeder and its preliminary separation based on the physical and mechanical properties of the components, followed by directing them to the working surfaces of a vibro-friction separator. This ensures the achievement of the main condition for the quality separation process on the friction surfaces of such machines: dispersing the seed mass to the level of a monolayer in the feeding zone, which reduces mutual entanglement and deviation from the intended trajectories of the seed material components, thereby enhancing the efficiency of the separation process. The aim of the theoretical research was to numerically model the trajectory of the component mixture flow along the designed helical plate of the vibro-friction separator feeder and to justify the seed material feeding speed. In the calculations, the physical and mechanical properties of the seed mixture components were considered as ranges of their average values, accounting for normal distribution. The fractional content of the components in the seed mixture – χn, χd, χb, and the mixture feeding speed Q (units per second) were taken as the research factors. Based on the numerical modeling results of the component mixture flow trajectory along the designed helical plate of the vibro-friction separator feeder, the dependence of the total overlap area Sf of the component distribution across the width of the helical plate on the fractional content of the components in the mixture χn, χd, χb, and the feeding speed Q was determined. The evaluation criterion was that the total overlap area Sf should be minimal, and the feeding speed Q should be maximal. Solving the mathematically defined condition using the function ranking method and combining it into a single criterion allowed obtaining the optimal seed mixture feeding speed of Q = 103 units per second.


  • NUMERICAL SIMULATION OF THE PROCESS OF PRELIMINARY SEPARATION OF THE SEED MIXTURE ON THE SCREW FEEDER OF THE VIBRO-FRICTION SEPARATOR

    by Oleksii Kozachenko, Elchyn Aliiev, Yevhenii Pikh

    The separation process is the most important stage in the preparation of seed material of small-seeded oil crops. It is based on technical-technological principles of separation of seed material, the basis of which is the difference in the physical and mechanical properties of individual components. Such properties include shape, size, mass, specific gravity, surface condition and other properties that characterize the main seed of the crop and impurities. Since the seed mixture is a polydisperse medium in its physical essence, the theoretical studies were carried out using numerical simulation software packages that contain models of discrete elements. The goal is to carry out a numerical simulation of the process of preliminary separation of the seed mixture on a screw feeder and to substantiate its rational design parameters. To carry out numerical simulation of the process of separation of the seed mixture on the vibro-friction separator, the improved physical and mathematical apparatus (1)–(12) of the movement of the particle of the seed mixture component, which is included in the model of the Simcenter Star-CCM+ software package, was used. As a result of the numerical simulation of the process of preliminary separation of the seed mixture on the screw feeder, a visualization of the process of movement of their main components (seeds of the main crop, weed seeds and plant impurities) from the accepted research factors (step of the turn of the screw plate) was obtained Hf, angle of inclination of the screw plate αf, the radius of the seed injection point rf, angle of rotation of the screw plate θf). According to the results of the calculation, the regression equations of the second order of the dependence of the radius were obtained rθ from the origin of the coordinates to the point of intersection of the trajectory of the components with a line that is at a certain angle θf rotation of the screw plate, from research factors. As an evaluation criterion, the condition of expanding the distribution zone of the components of the mixture is adopted, which consists in the fact that the radius for the seeds of the main crop rн should be the largest, and the radius for plant impurities rд should be the smallest. By solving the mathematically given condition by the method of function ranking and unification into a single criterion, rational design parameters of the screw feeder of the vibro-friction separator were obtained: Hf = 0,192 m, αf = 14,7 °, rf = 0,014 m, θf = 96,2 °.


  • SIMULATION OF THE STRESSED-DEFORMED STATE OF THE ELASTIC DISCTOR RACK WITH A STIFFNESS REGULATOR

    by Oleksiy Kozachenko, Oleksandr Volkovskii

    The paper involves the physical-mathematical modeling of the stress-strain state of an elastic stand of a developed disc harrow equipped with a stiffness regulator. The use of disc tools with individual attachment to elastic stands contributes to improving the quality and reducing the energy consumption of soil processing. This is due to the formation of oscillatory motion of the discs caused by the uneven resistance of the soil in the direction of the unit's movement. The goal of theoretical research is three-dimensional modeling of the stress-strain state of the elastic stand of the disc harrow with a stiffness regulator and substantiation of the range of its rational design parameters. To evaluate the interaction process between elastic working elements and the soil, a harmonic analysis was performed to determine the peak response of the system in a steady state to harmonic loads. In each step of the solution, all applied loads and base excitations have the same frequency, and the values are determined by the corresponding frequency curves. Using the SOLIDWORKS Simulation software package, the relevant physical-mathematical apparatus was compiled. On the basis of this approach, already at the stage of designing disk working bodies on elastic risers, it is possible to conclude about the possibility of them performing specific technological tasks, when by changing the parameters of the risers and conducting repeated studies, it is possible to obtain the corresponding dependencies in the form of regression equations. The results of numerical modeling provide visualization of the change in stress distribution over time in the stand. The dynamics of the change in maximum stress, located on the bend of the stand (R2) and the stiffness regulator (R1), were determined as the stress changes according to the law of damped oscillation with a specified natural frequency. In order to ensure the best working conditions of the elastic riser, it is necessary to ensure the greatest deformation of the riser at the place of attachment of the disc ΔL1 and, at the same time, the smallest value of the deformation of the tool frame ΔL2, by solving the trade-off problem in the Wolfram Cloud software package by maximizing the multiplicative function, the rational geometric dimensions of the diskator riser and constructive parameters of its placement in space.

  • Mathematical Model of the Movement of the Cut end of Chicory Roots in the Guide Channel

    by Oleg Lyashuk, Ternopil National Technical University named after Ivan Pulyu, Yevhen Berezhenko, Oleksiy Kozachenko, State Biotechnological Institute

    Oleg Lyashuk, Professor, Doctor in Technics (Doctor of Technic Sciences), Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine, e-mail: oleglashuk@ukr.net, ORCID ID: 0000-0003-4881-8568 Yevhen Berezhenko, PhD in Technics (Candidate of Technics Sciences), Ternopil National Technical University named after Ivan Pulyu, Ternopil, Ukraine Oleksiy Kozachenko, Professor, Doctor in Technics (Doctor of Technic Sciences), State Biotechnological Institute, Kharkiv, Ukraine, e-mail: o.v.kozachenko21@gmail.com, ORCID ID: 0000-0003-1326-4307 The increase in the production of root crops of chicory, which is a valuable technical crop, is restrained by the low level of mechanization of the main technological processes of their collection. The increased content of vegetable impurities or the remains of ghee in the collected root crops of chicory significantly reduces the quality of the raw material and, accordingly, the output of its processing products. On the basis of the analysis of the technological process of cutting root vegetables with L-shaped knives of a rotary vegetable cutter, a mathematical model was developed that functionally describes the movement of the cut vegetable in the guide channel of the vegetable cutting machine depending on the structural and kinematic parameters of the working organs of the cutting apparatus. On the basis of the solution of the mathematical model, the equation of the profile of the surface of the casing of the guide channel was obtained from the conditions of equal post-shock velocities and equal speeds of movement of the cut-off beam. It was established that the most acceptable is the profile in which the angle of collision, or the angle between the direction of the pre-impact velocity vector and the tangent to the profile of the guide channel at the point of impact is equal to 25 degrees, while the height of the profile of the guide channel is 1.2 m. For the value of the angle between in the direction of the pre-impact velocity vector and tangential to the profile of the guide channel at the point of impact 30...35 degrees. the initial speed of movement of the cut particle of the string is in the range of 9.5...10.5 m/s, and at the exit from the outlet throat – 2.5...3.5 m/s, while the time of moving the string along the guide channel is 0.15 ...0.2 s.

  • Improving the Sowing Properties of Safflower Dye Seeds Using a Vibrating Seed Cleaning Machine

    by Oleksiy Kozachenko, Mykola Bakum, Anatoly Mykhailov, Mykola Krakot, Olga Chala, Oleksiy Zavhorodniy, State Biotechnological University


  • Open Access

    Experimental substantiation of the rational parameters for a reaping machine of the comb type for harvesting oil flax seeds

    by Olecsiy Kozachenko, Andrii Pakhuchyi, Olexander Shkregal, Sergiy Sorokin, Sergey Dyakonov, Мykola Gusarenko, Volodymyr Kadenko

    This paper reports the results of the experimental study to substantiate the rational structural and regime parameters of a two-drum reaping machine for harvesting flax oilseeds by the method of combing plants on the root. We have confirmed the results of the preliminary mathematical modeling of the process of separating a combed heap in the reaping machine with a predefined curved shape of the casing. An experimental study of the heap separation process in a reaping machine has established the dependence of the mass fraction of the discharge of husk and stem particles from its region δh, the proportion of the release of seeds and capsules with seeds δh, and the consumed power P, on the rotation frequency of the beater-reflector n1, and the combing drum n2, the position of the air grate L and its width B. The following structural-mode parameters of the comb-type reaping machine for harvesting oil flax seeds have been defined as the most significant ones: the rotation frequency of the beater-reflector, n1=892 rpm; the rotation frequency of the comb drum, n2=652 rpm; the position of the air grate, L=0.62 m, and its width, B=0.56 m. In this case, the mass fraction of the discharge of husk and stem particles is δh=47.5 %, the share of the loss of seeds and capsules with seeds from the reaping machine is, respectively, δh=2.1 %, and the power consumed to perform the process is P=2.7 kW. The statistical analysis has demonstrated that the correlation coefficient between the theoretical and experimental data is 0.88‒0.95; a relative error in the optimal values is 4.6 %. The actual and statistical comparison of the theoretical and experimental data has confirmed the adequacy of the mathematical models built as a result of the theoretical research.Based on the results of our experimental research, one can argue about the usefulness of their application for engineering calculations when designing new technical means for harvesting crops by the method of combing plants on the root

  • Modeling Technological Parameters for Producing Combined Electrospark Deposition Coatings

    by Viacheslav Tarelnyk, Ievgen Konoplianchenko, Nataliia Tarelnyk, Aleksey Kozachenko

    The paper represents a formalized methodology for solving the problem of creating fundamentally new materials, such as "base - coating" ones, which have increased surface wear resistance and relatively high strength and viscosity. Electrospark alloying (ESA) method is proposed as a process for depositing protective coatings on metal surfaces. There are considered the issues of improving the quality of the coatings formed by the ESA method. There is specified a feature of processing the surfaces having been treated with the use of the ESA method, which feature being associated with a relatively small thickness of the layers formed (tens of micrometers). Since to reduce the roughness of the surface, the process of grinding is difficult or even unacceptable to perform, it has been suggested to use the method of surface plastic deformation (SPD). One of the effective SPD methods for finishing the parts is a diamond smoothing process, which, in contrast to running-in with a ball or roller, allows processing the parts of very high hardness values. As a reserve to improve the quality of coatings formed by the ESA method, there is considered a process for producing combined electrospark deposition coatings (CEC) with hard wear-resistant and soft anti-friction metals integrated therein. There are represented the results of mass transfer process investigation performed at forming the CEC on the specimens of steel 45 with indium, tin and copper being used as soft antifriction metals, and tungsten and hard alloy of VK8 grade applied as wear-resistant materials. There is represented a mathematical model for calculating the main ESA technological parameters being necessary for forming the CEC and allowing to predict the weight gain (increase in weight) and size gain (increase in size) at the cathode (the part). It allows predicting the CEC main technological parameters for any electrode pair materials (substrate material and electrode materials making up the CEC).