Yevhenii Volynets
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Yevhenii Volynets has a total of 16 co-authors. Here are the top co-authors by number of shared publications:
- Hanna Pantsyreva
Vinnytsia National Agrarian University
6 shared publications - Ihor Didur
Vinnytsia National Agrarian University
2 shared publications - Ihor Kupchuk
Vinnytsia National Agrarian University
2 shared publications - Tetiana Boretska
Vinnytsia National Agrarian University
2 shared publications - Anatoly Spirin
Vinnytsia National Agrarian University
1 shared publication - Ihor Nishchakov
Vinnytsia National Agrarian University
1 shared publication
Latest Publications
- Open Access
- 3 September 2026
- Published by Vinnytsia National Agrarian University in Agriculture and Forestry
- No. 3 (42),p. 16
OPTIMIZATION OF THE WINTER WHEAT FEEDING SYSTEM IN THE RIGHT-BANK FOREST-STEP CONDITIONS
The influence of the variety, fertilization system and seed sowing rate on the formation of field germination, winter hardiness, plant density after overwintering and the coefficient of productive tillering of winter wheat in the conditions of the Right-Bank Forest-Steppe of Ukraine was studied. The relevance of the study is due to the need to improve technological methods for growing modern winter wheat varieties, taking into account the peculiarities of their reaction to the level of mineral nutrition and plant density, which is of particular importance in conditions of an unstable hydrothermal regime. The aim of the work was to establish the patterns of the influence of the variety, fertilization system and seeding rate on the formation of the main elements of the structure of the winter wheat crop and to determine the optimal combination of the studied factors. Field research was carried out in 2025–2026 on the basis of the Research and Development Department «Agronomichne» of Vinnytsia National Agrarian University. The experiment was set up according to a three-factor scheme with three replications. Two varieties of winter wheat were studied – Revolver and RZHT DELLO, two nutrition backgrounds – without fertilization and an increased background (10 t/ha of manure + N₁₀₀P₆₃K₁₁₁), as well as three seeding rates – 1.5; 3.0 and 4.0 million viable seeds per hectare. It was found that the use of an organo-mineral fertilization system provided improved field germination, increased winter hardiness of plants and increased crop density after overwintering regardless of the variety. The highest field germination (93.4%) and the maximum level of overwintering (76.3%) was formed by the RZHT DELLO variety with the application of 10 t/ha of manure + N₁₀₀P₆₃K₁₁₁₁ and a seeding rate of 1.5 million seeds/ha. The largest number of plants after wintering (281.3 pcs./m²) was also obtained in this variety with an increased fertilization background and a seeding rate of 4.0 million seeds/ha. It was determined that the productive tillering coefficient depended to the greatest extent on the plant density. The practical significance of the study lies in the scientific substantiation of the combination of an increased fertilization background (10 t/ha of manure + N₁₀₀P₆₃K₁₁₂) with a seeding rate of 3.0 million similar seeds per hectare, which ensures optimal formation of the density of the productive stem, high plant survival and creates the prerequisites for the realization of the genetic potential of modern winter wheat varieties in the conditions of the Right-Bank Forest-Steppe.
- 3 September 2026
- Published by Vinnytsia National Agrarian University in Agriculture and Forestry
- No. 3 (42),p. 16
Open AccessOPTIMIZATION OF THE WINTER WHEAT FEEDING SYSTEM IN THE RIGHT-BANK FOREST-STEP CONDITIONS
The influence of the variety, fertilization system and seed sowing rate on the formation of field germination, winter hardiness, plant density after overwintering and the coefficient of productive tillering of winter wheat in the conditions of the Right-Bank Forest-Steppe of Ukraine was studied. The relevance of the study is due to the need to improve technological methods for growing modern winter wheat varieties, taking into account the peculiarities of their reaction to the level of mineral nutrition and plant density, which is of particular importance in conditions of an unstable hydrothermal regime. The aim of the work was to establish the patterns of the influence of the variety, fertilization system and seeding rate on the formation of the main elements of the structure of the winter wheat crop and to determine the optimal combination of the studied factors. Field research was carried out in 2025–2026 on the basis of the Research and Development Department «Agronomichne» of Vinnytsia National Agrarian University. The experiment was set up according to a three-factor scheme with three replications. Two varieties of winter wheat were studied – Revolver and RZHT DELLO, two nutrition backgrounds – without fertilization and an increased background (10 t/ha of manure + N₁₀₀P₆₃K₁₁₁), as well as three seeding rates – 1.5; 3.0 and 4.0 million viable seeds per hectare. It was found that the use of an organo-mineral fertilization system provided improved field germination, increased winter hardiness of plants and increased crop density after overwintering regardless of the variety. The highest field germination (93.4%) and the maximum level of overwintering (76.3%) was formed by the RZHT DELLO variety with the application of 10 t/ha of manure + N₁₀₀P₆₃K₁₁₁₁ and a seeding rate of 1.5 million seeds/ha. The largest number of plants after wintering (281.3 pcs./m²) was also obtained in this variety with an increased fertilization background and a seeding rate of 4.0 million seeds/ha. It was determined that the productive tillering coefficient depended to the greatest extent on the plant density. The practical significance of the study lies in the scientific substantiation of the combination of an increased fertilization background (10 t/ha of manure + N₁₀₀P₆₃K₁₁₂) with a seeding rate of 3.0 million similar seeds per hectare, which ensures optimal formation of the density of the productive stem, high plant survival and creates the prerequisites for the realization of the genetic potential of modern winter wheat varieties in the conditions of the Right-Bank Forest-Steppe.
- Open Access
- 3 July 2026
- Published by Publishing House Baltija Publishing in Baltic Journal of Economic Studies
- Vol. 12 (3)
ANALYSIS OF TRENDS AND PROSPECTS FOR THE DEVELOPMENT OF THE LEGUME MARKET IN THE CONTEXT OF MODERN ECONOMIC CHALLENGES
The study aims to assess current trends and prospects for the legume market, analyse factors affecting supply and demand, and identify ways to boost the industry's economic efficiency in the face of modern economic challenges. The study is reinforced by the following applied tasks: 'Development of agrobiotechnological approaches to the production of crop products to restore the fertility of soils affected by hostilities'. The study focuses on the legume market as part of agricultural production and as an element of the state's food security system. The study focuses on the economic, agroclimatic and institutional factors influencing market performance, as well as the structure of demand and supply, and the level of yield and profitability of production. Data analysis revealed that Ukraine is a leading exporter of leguminous crops in Europe. Soybeans are cultivated on 168 thousand hectares, yielding 3.4 million tons; peas on 347 thousand hectares, yielding 610 thousand tons; chickpeas on 40 thousand hectares, yielding 50 thousand tons; and beans on 45 thousand hectares, yielding 50 thousand tons. The authors' own research into crop yields at Vinnytsia National Agrarian University under conditions of economic activity proved that the yields exceeded the average Ukrainian level for soybeans (2.67 t/ha), chickpeas (3.02 t/ha), peas (4.16 t/ha) and beans (3.63 t/ha). This indicates the potential for increasing productivity. Market analysis demonstrates its sensitivity to a range of external and internal factors, including world prices, weather conditions, military risks, logistical constraints, and investment activity. A SWOT analysis reveals strengths such as favourable soil and climatic conditions, agrobiological potential and export experience, as well as weaknesses such as lower average yields compared to leading countries, limited internal processing and uneven technical support. The following strategic directions for market development are proposed: increasing yield through the introduction of zonal cultivation technologies and modern varietal composition; developing an internal programme to deal with processing based on the high added value of products; diversifying export markets and logistics; and improving state support mechanisms. The expected effects of implementing the measures are an increase in average yields by 15-25%, an increase in profitability by 10-18%, an increase in gross receipts, and a strengthening of Ukraine's export potential. This will ensure long-term food security and competitive advantages in the international market.
- 3 July 2026
- Published by Publishing House Baltija Publishing in Baltic Journal of Economic Studies
- Vol. 12 (3)
Open AccessANALYSIS OF TRENDS AND PROSPECTS FOR THE DEVELOPMENT OF THE LEGUME MARKET IN THE CONTEXT OF MODERN ECONOMIC CHALLENGES
The study aims to assess current trends and prospects for the legume market, analyse factors affecting supply and demand, and identify ways to boost the industry's economic efficiency in the face of modern economic challenges. The study is reinforced by the following applied tasks: 'Development of agrobiotechnological approaches to the production of crop products to restore the fertility of soils affected by hostilities'. The study focuses on the legume market as part of agricultural production and as an element of the state's food security system. The study focuses on the economic, agroclimatic and institutional factors influencing market performance, as well as the structure of demand and supply, and the level of yield and profitability of production. Data analysis revealed that Ukraine is a leading exporter of leguminous crops in Europe. Soybeans are cultivated on 168 thousand hectares, yielding 3.4 million tons; peas on 347 thousand hectares, yielding 610 thousand tons; chickpeas on 40 thousand hectares, yielding 50 thousand tons; and beans on 45 thousand hectares, yielding 50 thousand tons. The authors' own research into crop yields at Vinnytsia National Agrarian University under conditions of economic activity proved that the yields exceeded the average Ukrainian level for soybeans (2.67 t/ha), chickpeas (3.02 t/ha), peas (4.16 t/ha) and beans (3.63 t/ha). This indicates the potential for increasing productivity. Market analysis demonstrates its sensitivity to a range of external and internal factors, including world prices, weather conditions, military risks, logistical constraints, and investment activity. A SWOT analysis reveals strengths such as favourable soil and climatic conditions, agrobiological potential and export experience, as well as weaknesses such as lower average yields compared to leading countries, limited internal processing and uneven technical support. The following strategic directions for market development are proposed: increasing yield through the introduction of zonal cultivation technologies and modern varietal composition; developing an internal programme to deal with processing based on the high added value of products; diversifying export markets and logistics; and improving state support mechanisms. The expected effects of implementing the measures are an increase in average yields by 15-25%, an increase in profitability by 10-18%, an increase in gross receipts, and a strengthening of Ukraine's export potential. This will ensure long-term food security and competitive advantages in the international market.
- Open Access
- 17 April 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 38
DETERMINATION OF THE DEPENDENCE OF FEED MIXTURE HOMOGENEITY ON THE OPERATING PARAMETERS OF A VIBRATORY MIXER
The paper investigates the influence of the operating parameters of a vibratory mixer on the formation of feed mixture homogeneity and establishes quantitative patterns in the variation of the homogeneity coefficient depending on the kinematic and vibration characteristics of the process. The relevance of this study stems from the need to ensure high-quality feed mixtures with minimal time and energy expenditure, as the uniformity of the components directly affects feeding efficiency and the economic performance of livestock farming. The aim of the research is to establish a statistically justified multifactor dependence of the homogeneity coefficient on the operating parameters of a vibratory mixer and to determine rational operating modes. Experimental studies were carried out using a full factorial experimental design with variation of the paddle shaft rotational speed, container rotational speed, vibration mode coefficient, and mixing time. Based on the processing of experimental data, a second-order regression model describing the variation of the mixture homogeneity coefficient was developed. The statistical significance of the model parameters was evaluated using Student’s t-test, and its adequacy was verified using Fisher’s F-test at a confidence level of 0.95. According to the modeling results, rational operating modes of the mixer were determined, under which the homogeneity coefficient reaches δ = 0.932 at a paddle shaft rotational speed of 40.9 min-1 and a container rotational speed of 23.9 min-1. The minimum value of δ = 0.851 was observed at low values of the operating parameters. An effective operating region was established in which a technologically sufficient level of homogeneity (δ ≥ 0.9) is ensured. An analytical dependence of the mixing time t0.9 required to achieve a specified level of homogeneity was obtained, which makes it possible to predict process parameters and perform optimization. The correlation coefficient between experimental and calculated data is 0.87, confirming the adequacy of the developed mathematical model.
- 17 April 2026
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 38
Open AccessDETERMINATION OF THE DEPENDENCE OF FEED MIXTURE HOMOGENEITY ON THE OPERATING PARAMETERS OF A VIBRATORY MIXER
The paper investigates the influence of the operating parameters of a vibratory mixer on the formation of feed mixture homogeneity and establishes quantitative patterns in the variation of the homogeneity coefficient depending on the kinematic and vibration characteristics of the process. The relevance of this study stems from the need to ensure high-quality feed mixtures with minimal time and energy expenditure, as the uniformity of the components directly affects feeding efficiency and the economic performance of livestock farming. The aim of the research is to establish a statistically justified multifactor dependence of the homogeneity coefficient on the operating parameters of a vibratory mixer and to determine rational operating modes. Experimental studies were carried out using a full factorial experimental design with variation of the paddle shaft rotational speed, container rotational speed, vibration mode coefficient, and mixing time. Based on the processing of experimental data, a second-order regression model describing the variation of the mixture homogeneity coefficient was developed. The statistical significance of the model parameters was evaluated using Student’s t-test, and its adequacy was verified using Fisher’s F-test at a confidence level of 0.95. According to the modeling results, rational operating modes of the mixer were determined, under which the homogeneity coefficient reaches δ = 0.932 at a paddle shaft rotational speed of 40.9 min-1 and a container rotational speed of 23.9 min-1. The minimum value of δ = 0.851 was observed at low values of the operating parameters. An effective operating region was established in which a technologically sufficient level of homogeneity (δ ≥ 0.9) is ensured. An analytical dependence of the mixing time t0.9 required to achieve a specified level of homogeneity was obtained, which makes it possible to predict process parameters and perform optimization. The correlation coefficient between experimental and calculated data is 0.87, confirming the adequacy of the developed mathematical model.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 102
MATHEMATICAL AND SIMULATION MODELING OF HEAT AND MASS TRANSFER DURING INFRARED MICRONIZATION OF SOYBEAN GRAIN
The paper presents the results of mathematical and simulation modeling of heat and mass transfer during infrared (IR) micronization of soybean grain. A physico-mathematical model was developed that accounts for the absorption of radiant energy in the surface layer, non-stationary heat conduction within the grain mass, and temperature-dependent moisture diffusion. The process was described using a system of differential equations in spherical coordinates that characterize the temporal and spatial distribution of temperature and moisture. Boundary conditions were formulated based on the energy balance at the grain surface, including absorbed infrared flux, convective heat exchange, and evaporation losses. Numerical implementation was carried out using the implicit finite-difference method in the Python environment with NumPy and SciPy libraries. A simulation model was created that enables variation of structural and operating parameters (heat-flux density, irradiation duration, grain-layer thickness) and prediction of process outcomes. The results include calculated distributions of temperature and moisture in the grain under various processing conditions. It was established that at a heat-flux density of 20–25 kW/m², the central grain temperature reaches 150 ± 5 °C within 80–90 s, ensuring effective inactivation of antinutritional compounds without protein degradation. The average relative deviation between simulated and experimental data did not exceed 6 %, confirming the reliability of the proposed model. The simulation tool provides visualization of thermal and moisture fields and enables determination of optimal operating parameters with regard to energy efficiency and product quality. The developed model can be applied for the design of infrared processing equipment, optimization of operating regimes, and creation of automated control systems for high-protein raw materials.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 102
MATHEMATICAL AND SIMULATION MODELING OF HEAT AND MASS TRANSFER DURING INFRARED MICRONIZATION OF SOYBEAN GRAIN
The paper presents the results of mathematical and simulation modeling of heat and mass transfer during infrared (IR) micronization of soybean grain. A physico-mathematical model was developed that accounts for the absorption of radiant energy in the surface layer, non-stationary heat conduction within the grain mass, and temperature-dependent moisture diffusion. The process was described using a system of differential equations in spherical coordinates that characterize the temporal and spatial distribution of temperature and moisture. Boundary conditions were formulated based on the energy balance at the grain surface, including absorbed infrared flux, convective heat exchange, and evaporation losses. Numerical implementation was carried out using the implicit finite-difference method in the Python environment with NumPy and SciPy libraries. A simulation model was created that enables variation of structural and operating parameters (heat-flux density, irradiation duration, grain-layer thickness) and prediction of process outcomes. The results include calculated distributions of temperature and moisture in the grain under various processing conditions. It was established that at a heat-flux density of 20–25 kW/m², the central grain temperature reaches 150 ± 5 °C within 80–90 s, ensuring effective inactivation of antinutritional compounds without protein degradation. The average relative deviation between simulated and experimental data did not exceed 6 %, confirming the reliability of the proposed model. The simulation tool provides visualization of thermal and moisture fields and enables determination of optimal operating parameters with regard to energy efficiency and product quality. The developed model can be applied for the design of infrared processing equipment, optimization of operating regimes, and creation of automated control systems for high-protein raw materials.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 137
DESIGN AND ENERGY PRINCIPLES FOR DEVELOPING AN INFRARED MICRONIZER FOR THE PROCESSING OF LEGUME GRAINS
The article presents the design and energy principles for developing an infrared (IR) micronizer intended for the thermal treatment of legume grains aimed at inactivating antinutritional compounds and improving feed nutritional quality. The use of medium-wave infrared radiation (λ = 2-4 μm) was found to provide uniform volumetric heating of the grain layer and reduce specific energy consumption by 30-40 % compared to conventional convective drying. A schematic design of the proposed micronizer includes a treatment chamber with polished reflectors, a block of quartz emitters, a mixing mechanism, a multilayer thermal insulation casing, and an automated temperature-control system. The optimal design and operating parameters were determined as follows: emitter power 1.0-1.5 kW, heat-flux density 15-25 kW/m2, distance from emitters to the grain layer 150 mm, and grain-layer thickness 15-20 mm. Experimental results demonstrated that heating at 140-160 °C for 70-90 s reduces urease activity by a factor of 8-10 while preserving 97-98 % of the crude protein content. The overall thermal efficiency of the unit reached 0.78-0.82, confirming its high energy performance. The use of polished aluminum reflectors decreased heat losses by 15-18 %, and PID-based power control maintained temperature stability within ±2 °C. The developed structural and energy solutions form a scientific and practical basis for creating next-generation industrial IR systems for feed processing, ensuring the safety, quality, and nutritional integrity of legume raw materials used in compound feed production.
- 25 December 2025
- Published by Vinnytsia National Agrarian University in Vibrations in engineering and technology
- p. 137
DESIGN AND ENERGY PRINCIPLES FOR DEVELOPING AN INFRARED MICRONIZER FOR THE PROCESSING OF LEGUME GRAINS
The article presents the design and energy principles for developing an infrared (IR) micronizer intended for the thermal treatment of legume grains aimed at inactivating antinutritional compounds and improving feed nutritional quality. The use of medium-wave infrared radiation (λ = 2-4 μm) was found to provide uniform volumetric heating of the grain layer and reduce specific energy consumption by 30-40 % compared to conventional convective drying. A schematic design of the proposed micronizer includes a treatment chamber with polished reflectors, a block of quartz emitters, a mixing mechanism, a multilayer thermal insulation casing, and an automated temperature-control system. The optimal design and operating parameters were determined as follows: emitter power 1.0-1.5 kW, heat-flux density 15-25 kW/m2, distance from emitters to the grain layer 150 mm, and grain-layer thickness 15-20 mm. Experimental results demonstrated that heating at 140-160 °C for 70-90 s reduces urease activity by a factor of 8-10 while preserving 97-98 % of the crude protein content. The overall thermal efficiency of the unit reached 0.78-0.82, confirming its high energy performance. The use of polished aluminum reflectors decreased heat losses by 15-18 %, and PID-based power control maintained temperature stability within ±2 °C. The developed structural and energy solutions form a scientific and practical basis for creating next-generation industrial IR systems for feed processing, ensuring the safety, quality, and nutritional integrity of legume raw materials used in compound feed production.
- 30 May 2025
- Published by Vinnytsia National Agrarian University in Agriculture and Forestry
- No. 2 (37)
FEATURES OF GROWING PEA VARIETIES IN THE CONDITIONS OF THE RIGHT-BANK FOREST-STEP
The purpose of the study is to analyze the technological components of improved technological techniques on the example of growing pea grain in crop rotations of the Right-Bank Forest-Steppe. The experimental field experiment was carried out in the conditions of the Right-Bank Forest-Steppe on gray forest soils in the Research and Development Group «Agronomichne» of the Vinnytsia National Agrarian University, which showed that the level of the production process during the formation of pea grain largely depended on the hydrothermal conditions of the years of research, as well as the factors that were put to study. The relevance of the conducted field research is due to their compliance with the tasks of applied research, which are implemented within the framework of budget financing on the topic «Development of scientific and technological support for increasing soil fertility and rational use of the potential of bioresources». The theoretical and methodological basis of the calculations used generally accepted methods in crop production. The results of the experiment indicate that pre-sowing seed treatment and foliar top dressing significantly affected the level of the production process of pea grain in the conditions of the Right-Bank Forest-Steppe. Therefore, in 2025, within the framework of the implementation of the tasks of the applied research, the sowing of pea varieties Impulse and Eso was carried out on March 23 using a bacterial preparation (Rizoline + Rhizosave) and organo-mineral fertilizer (Groundfix) in the pre-sowing seed treatment. The density of seedlings was 134.0 in the Eso variety and 155.5 pcs./m2 in the Impulse variety. On average, during the 2023-2024 years of research, a stable plant density was observed in the full seedlings phase, which fluctuated within 115-120 pcs./m², while no significant variation between the experimental variants was recorded. At the stage of maturation, under the influence of hydrothermal conditions of the growing season and the applied elements of biologization, the density of pea plants of the Profit variety decreased to 105-107 pcs./m². At the same time, in the Gregor variety, this indicator remained at a slightly higher level – 108-110 pcs./m², which may indicate its greater resistance to abiotic factors.
- 30 May 2025
- Published by Vinnytsia National Agrarian University in Agriculture and Forestry
- No. 2 (37)
FEATURES OF GROWING PEA VARIETIES IN THE CONDITIONS OF THE RIGHT-BANK FOREST-STEP
The purpose of the study is to analyze the technological components of improved technological techniques on the example of growing pea grain in crop rotations of the Right-Bank Forest-Steppe. The experimental field experiment was carried out in the conditions of the Right-Bank Forest-Steppe on gray forest soils in the Research and Development Group «Agronomichne» of the Vinnytsia National Agrarian University, which showed that the level of the production process during the formation of pea grain largely depended on the hydrothermal conditions of the years of research, as well as the factors that were put to study. The relevance of the conducted field research is due to their compliance with the tasks of applied research, which are implemented within the framework of budget financing on the topic «Development of scientific and technological support for increasing soil fertility and rational use of the potential of bioresources». The theoretical and methodological basis of the calculations used generally accepted methods in crop production. The results of the experiment indicate that pre-sowing seed treatment and foliar top dressing significantly affected the level of the production process of pea grain in the conditions of the Right-Bank Forest-Steppe. Therefore, in 2025, within the framework of the implementation of the tasks of the applied research, the sowing of pea varieties Impulse and Eso was carried out on March 23 using a bacterial preparation (Rizoline + Rhizosave) and organo-mineral fertilizer (Groundfix) in the pre-sowing seed treatment. The density of seedlings was 134.0 in the Eso variety and 155.5 pcs./m2 in the Impulse variety. On average, during the 2023-2024 years of research, a stable plant density was observed in the full seedlings phase, which fluctuated within 115-120 pcs./m², while no significant variation between the experimental variants was recorded. At the stage of maturation, under the influence of hydrothermal conditions of the growing season and the applied elements of biologization, the density of pea plants of the Profit variety decreased to 105-107 pcs./m². At the same time, in the Gregor variety, this indicator remained at a slightly higher level – 108-110 pcs./m², which may indicate its greater resistance to abiotic factors.
- Open Access
- 1 March 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 26 (3) , 393-403
Agroecological assessment of technologies for growing legumes
The conducted research is devoted to the selection of the optimal assortment for certain growing conditions and preparations for seed treatment before sowing during the growing season, which is one of the important tasks not only for increasing the level of yield and productivity elements, but...
- 1 March 2025
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Ecological Engineering & Environmental Technology
- Vol. 26 (3) , 393-403
Open AccessAgroecological assessment of technologies for growing legumes
The conducted research is devoted to the selection of the optimal assortment for certain growing conditions and preparations for seed treatment before sowing during the growing season, which is one of the important tasks not only for increasing the level of yield and productivity elements, but...
- Open Access
- 30 May 2024
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 337 (3(2)) , 328-333
VIBRATORY CONVEYOR FOR LOADING FOOD MIXTURE MIXER
The uniform supply of components to the mixing chamber is one of the main keys to the high-quality performance of this technological process. Currently, there is a lack of reliable feeders for mixers of food mixtures, especially of low productivity. This led to conducting analytical studies that make it possible to develop an effective design of the feeder, to determine the rational parameters of its work. As the analysis of the existing designs of feeders for loose materials showed, the problem of providing dosed supply of seeds or other particles in small volumes to the working chamber of the mixer can be solved by using oscillating conveyors, in which the transportation process is carried out due to high-frequency oscillations with a small amplitude. Depending on the operating modes, the material can move in the oscillating conveyor without detachment from the working surface (inertial conveyors) or with detachment (vibratory conveyors). Studies have shown that the most effective in terms of ensuring a stable material supply is the detachable mode of operation of bulk material feeders (vibratory type of feeders). In addition, this mode of operation helps to create a fluidized bed of material, which also increases the reliability of the feeders. The analysis of the movement of the seed along the oscillating plane made it possible to determine the influence of the main factors on the rational parameters that ensure a reliable dosed supply of the seed mass to the mixer of low productivity. The use of the proposed vibrating feeder scheme allows for the required performance, but significantly complicates the design of the food mixer. The conducted analytical and experimental studies made it possible to propose rational constructive and technological parameters of the feeder for the mixer of food mixtures of low productivity. It should be noted that when determining the nature of the movement of the seed mass along the oscillating plane, it is necessary to take into account the effect of the fluidized bed, which is the subject of additional research.
- 30 May 2024
- Published by Khmelnytskyi National University in Herald of Khmelnytskyi National University. Technical sciences
- Vol. 337 (3(2)) , 328-333
Open AccessVIBRATORY CONVEYOR FOR LOADING FOOD MIXTURE MIXER
The uniform supply of components to the mixing chamber is one of the main keys to the high-quality performance of this technological process. Currently, there is a lack of reliable feeders for mixers of food mixtures, especially of low productivity. This led to conducting analytical studies that make it possible to develop an effective design of the feeder, to determine the rational parameters of its work. As the analysis of the existing designs of feeders for loose materials showed, the problem of providing dosed supply of seeds or other particles in small volumes to the working chamber of the mixer can be solved by using oscillating conveyors, in which the transportation process is carried out due to high-frequency oscillations with a small amplitude. Depending on the operating modes, the material can move in the oscillating conveyor without detachment from the working surface (inertial conveyors) or with detachment (vibratory conveyors). Studies have shown that the most effective in terms of ensuring a stable material supply is the detachable mode of operation of bulk material feeders (vibratory type of feeders). In addition, this mode of operation helps to create a fluidized bed of material, which also increases the reliability of the feeders. The analysis of the movement of the seed along the oscillating plane made it possible to determine the influence of the main factors on the rational parameters that ensure a reliable dosed supply of the seed mass to the mixer of low productivity. The use of the proposed vibrating feeder scheme allows for the required performance, but significantly complicates the design of the food mixer. The conducted analytical and experimental studies made it possible to propose rational constructive and technological parameters of the feeder for the mixer of food mixtures of low productivity. It should be noted that when determining the nature of the movement of the seed mass along the oscillating plane, it is necessary to take into account the effect of the fluidized bed, which is the subject of additional research.
- Open Access
- 1 May 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 25 (5) , 279-293
Soybean Productivity of the Ukraine under Ecologization of Cultivation Technology
The scientific article is devoted to the greening of technologies and its individual aspects, which is an important agricultural measure that can curb further decline in soil fertility, stabilize production systems, and reduce dependence on technological factors. Of the entire complex of...
- 1 May 2024
- Published by Wydawnictwo Naukowe Gabriel Borowski (WNGB) in Journal of Ecological Engineering
- Vol. 25 (5) , 279-293
Open AccessSoybean Productivity of the Ukraine under Ecologization of Cultivation Technology
The scientific article is devoted to the greening of technologies and its individual aspects, which is an important agricultural measure that can curb further decline in soil fertility, stabilize production systems, and reduce dependence on technological factors. Of the entire complex of...
- 22 April 2024
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1(124),p. 26-32
REVIEW OF MODERN TECHNOLOGIES FOR INACTIVATION OF ANTI-NUTRIENTS IN SOYBEANS
The study examines technologies for inactivating anti-nutrients in soybeans, such as proteolytic enzyme inhibitors. In addition, soybeans have two trypsin inhibitors that bind cystine and methionine. Protease inhibitors include trypsin and chymotrypsin inhibitors, which are substances that are naturally present in soybeans to protect them from being eaten by birds and rodents and from the development of microflora. According to their heat resistance, antinutrients can be classified into heat-sensitive and heat-resistant. The purpose of the research was to study modern methods and technological solutions aimed at optimizing the preservation of useful characteristics of soybeans and reducing the content of anti-nutrients. To inactivate these anti-nutrients, physical, chemical and biological methods of legume processing are used. As a result of heat treatment, the nutritional value of beans increases, namely, the digestibility of proteins increases by up to 90%, and the contamination of beans with microflora is significantly reduced. The amount of trypsin inhibitor in soybeans after roasting with a roaster significantly decreased by 2.45 times, and lipoxygenase activity - by 2.71 times. One of the most attractive and highly effective, but not sufficiently researched methods is the method of heat treatment of legume seeds called micronization. In this case, the process of inactivation of anti-nutrients in soybeans is very fast - within 50...70 seconds, the nutritional value of protein is significantly increased, and the energy value increases (approximately from 7800 to 16000 kJ/kg). The technology of neutralization of anti-nutrients in soybeans based on their heat treatment in a 2.5 % solution of calcium hydroxide is considered. Processing of soybeans according to the developed technology allows to obtain feed without urease activity, and the content of trypsin inhibitor is at the level of 2-3 mg/g.
- 22 April 2024
- Published by Vinnytsia National Agrarian University in Engineering, Energy, Transport AIC
- No. 1(124),p. 26-32
REVIEW OF MODERN TECHNOLOGIES FOR INACTIVATION OF ANTI-NUTRIENTS IN SOYBEANS
The study examines technologies for inactivating anti-nutrients in soybeans, such as proteolytic enzyme inhibitors. In addition, soybeans have two trypsin inhibitors that bind cystine and methionine. Protease inhibitors include trypsin and chymotrypsin inhibitors, which are substances that are naturally present in soybeans to protect them from being eaten by birds and rodents and from the development of microflora. According to their heat resistance, antinutrients can be classified into heat-sensitive and heat-resistant. The purpose of the research was to study modern methods and technological solutions aimed at optimizing the preservation of useful characteristics of soybeans and reducing the content of anti-nutrients. To inactivate these anti-nutrients, physical, chemical and biological methods of legume processing are used. As a result of heat treatment, the nutritional value of beans increases, namely, the digestibility of proteins increases by up to 90%, and the contamination of beans with microflora is significantly reduced. The amount of trypsin inhibitor in soybeans after roasting with a roaster significantly decreased by 2.45 times, and lipoxygenase activity - by 2.71 times. One of the most attractive and highly effective, but not sufficiently researched methods is the method of heat treatment of legume seeds called micronization. In this case, the process of inactivation of anti-nutrients in soybeans is very fast - within 50...70 seconds, the nutritional value of protein is significantly increased, and the energy value increases (approximately from 7800 to 16000 kJ/kg). The technology of neutralization of anti-nutrients in soybeans based on their heat treatment in a 2.5 % solution of calcium hydroxide is considered. Processing of soybeans according to the developed technology allows to obtain feed without urease activity, and the content of trypsin inhibitor is at the level of 2-3 mg/g.