Langqiu Xiao
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Langqiu Xiao has a total of 64 co-authors. Here are the top co-authors by number of shared publications:
- Thomas E. Mallouk
Department of Chemistry, University of Pennsylvania, 231 S. 34th Street, Philadelphia, Pennsylvania 19104, United States
11 shared publications - Colton Jacob Sheehan
University of Pennsylvania
6 shared publications - Sa Suo
Department of Chemistry, Emory University, 1515 Dickey Drive, Atlanta, Georgia 30322, United States
4 shared publications - Fengyi Zhao
Department of Chemistry, Emory University, 1515 Dickey Drive, Atlanta, Georgia 30322, United States
3 shared publications - Tianquan Lian
Emory University
3 shared publications Tianyue Gao
Department of Chemistry, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
3 shared publications
Latest Publications
- 4 June 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (23) , 14880-14888
Automation of the Marangoni Effect for Making Well-Ordered and Transferable Colloidal Monolayers at the Air–Water Interface
The ability to efficiently create ordered colloidal monolayers on solid surfaces is critical for nanosphere lithography and related applications. We describe here a simple automated method for growing well-ordered 2D crystals of polystyrene spheres at an air-water interface and transferring them to silicon substrates on the wafer scale. The method exploits the Marangoni effect and is enhanced by surface treatment of both the basin for monolayer formation and the intended substrate for transfer. Quantitative image analysis of the sphere monolayers shows that the monolayer packing is improved by automation. Dual-droplet automation is shown to be useful for controlling 2D crystal growth and forming phase-separated monolayers from two different colloidal particle sizes.
- 4 June 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (23) , 14880-14888
Automation of the Marangoni Effect for Making Well-Ordered and Transferable Colloidal Monolayers at the Air–Water Interface
The ability to efficiently create ordered colloidal monolayers on solid surfaces is critical for nanosphere lithography and related applications. We describe here a simple automated method for growing well-ordered 2D crystals of polystyrene spheres at an air-water interface and transferring them to silicon substrates on the wafer scale. The method exploits the Marangoni effect and is enhanced by surface treatment of both the basin for monolayer formation and the intended substrate for transfer. Quantitative image analysis of the sphere monolayers shows that the monolayer packing is improved by automation. Dual-droplet automation is shown to be useful for controlling 2D crystal growth and forming phase-separated monolayers from two different colloidal particle sizes.
- 15 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (17) , 14270-14279
Molecularly Thin Nanosheet Films as Water Dissociation Reaction Catalysts Enhanced by Strong Electric Fields in Bipolar Membranes
Bipolar membranes (BPMs) are interesting materials for the development of next-generation electrochemical energy conversion and separations processes. One of the key challenges in optimizing BPM performance is enhancing the rate of the water dissociation (WD) reaction. While electric field effects, specifically the second Wien effect, have been demonstrated to enhance the rate of WD reaction, making BPMs with low overpotentials for WD using primary electric field effects has been difficult to achieve. In this study, we constructed an abrupt interfacial structure between the anion exchange membrane (AEM) and cation exchange membrane (CEM) of BPMs to maximize the intensity of local electric field. A film of densely tiled, molecularly thin titanium oxide nanosheets was deposited as the interfacial layer to create an abrupt interface for studying extreme electric field effects. Although BPMs with titanium oxide nanosheet films exhibited higher WD reaction resistance compared to thicker catalyst layers composed of nanoparticles at low current density, they showed superior performance at higher current densities, where strong electric fields were present, and an apparent WD overpotential of 0.25 V at 300 mA cm-2 was extracted from electrochemical impedance measurements. These results highlight the potential of optimizing BPM performance by maximizing the second Wien effect through the utilization of two-dimensionally assembled nanosheet films.
- 15 April 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (17) , 14270-14279
Molecularly Thin Nanosheet Films as Water Dissociation Reaction Catalysts Enhanced by Strong Electric Fields in Bipolar Membranes
Bipolar membranes (BPMs) are interesting materials for the development of next-generation electrochemical energy conversion and separations processes. One of the key challenges in optimizing BPM performance is enhancing the rate of the water dissociation (WD) reaction. While electric field effects, specifically the second Wien effect, have been demonstrated to enhance the rate of WD reaction, making BPMs with low overpotentials for WD using primary electric field effects has been difficult to achieve. In this study, we constructed an abrupt interfacial structure between the anion exchange membrane (AEM) and cation exchange membrane (CEM) of BPMs to maximize the intensity of local electric field. A film of densely tiled, molecularly thin titanium oxide nanosheets was deposited as the interfacial layer to create an abrupt interface for studying extreme electric field effects. Although BPMs with titanium oxide nanosheet films exhibited higher WD reaction resistance compared to thicker catalyst layers composed of nanoparticles at low current density, they showed superior performance at higher current densities, where strong electric fields were present, and an apparent WD overpotential of 0.25 V at 300 mA cm-2 was extracted from electrochemical impedance measurements. These results highlight the potential of optimizing BPM performance by maximizing the second Wien effect through the utilization of two-dimensionally assembled nanosheet films.
- 6 March 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (11) , 9629-9639
Electron Transfer Energetics in Photoelectrochemical CO2 Reduction at Viologen Redox Polymer-Modified p-Si Electrodes
While redox polymer-mediated catalysis at silicon photoelectrodes has been studied since the 1980s, there have been few detailed studies of these materials in photoelectrochemical CO2 reduction. Here, we develop silicon photoelectrodes functionalized with a viologen-based polymer that mediates the formation of catalytic gold nanoparticles. The presence of gold was confirmed by X-ray photoelectron spectroscopy (XPS), and the nanoparticles were imaged with high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM). We probed the CO2 reduction process during bulk photoelectrolysis to find modest, yet consistent CO faradaic efficiencies across a range of applied potentials. Operando surface-enhanced Raman spectroscopy (SERS) was used to measure the Fermi levels of both the viologen polymer and the Au catalyst sites. The operando measurement of the Fermi levels of all three components of the photocathode provides a unified picture of the electron transfer process in the semiconductor-redox polymer-catalyst system. The redox polymer serves as the electron transfer mediator between the Si substrate and Au sites. In addition, the Au Fermi level equilibrates with the Fermi level of the viologen polymer, which in turn fixes the quasi-Fermi level of Au catalysts at the p-Si/redox polymer interface. This suggests a potential future direction of using redox polymers with tunable potentials to modulate the potential of metal cocatalysts and thus control the reaction selectivity.
- 6 March 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (11) , 9629-9639
Electron Transfer Energetics in Photoelectrochemical CO2 Reduction at Viologen Redox Polymer-Modified p-Si Electrodes
While redox polymer-mediated catalysis at silicon photoelectrodes has been studied since the 1980s, there have been few detailed studies of these materials in photoelectrochemical CO2 reduction. Here, we develop silicon photoelectrodes functionalized with a viologen-based polymer that mediates the formation of catalytic gold nanoparticles. The presence of gold was confirmed by X-ray photoelectron spectroscopy (XPS), and the nanoparticles were imaged with high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM). We probed the CO2 reduction process during bulk photoelectrolysis to find modest, yet consistent CO faradaic efficiencies across a range of applied potentials. Operando surface-enhanced Raman spectroscopy (SERS) was used to measure the Fermi levels of both the viologen polymer and the Au catalyst sites. The operando measurement of the Fermi levels of all three components of the photocathode provides a unified picture of the electron transfer process in the semiconductor-redox polymer-catalyst system. The redox polymer serves as the electron transfer mediator between the Si substrate and Au sites. In addition, the Au Fermi level equilibrates with the Fermi level of the viologen polymer, which in turn fixes the quasi-Fermi level of Au catalysts at the p-Si/redox polymer interface. This suggests a potential future direction of using redox polymers with tunable potentials to modulate the potential of metal cocatalysts and thus control the reaction selectivity.
- Open Access
- 9 November 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (12)
Bipolar Membranes With Controlled, Microscale 3D Junctions Enhance the Rates of Water Dissociation and Formation
A soft lithographic method is developed for making bipolar membranes (BPMs) with catalytic junctions formed from arrays of vertically oriented microscale cylinders. The membranes are cast from reusable polydimethylsiloxane (PDMS) molds made from silicon masters, which are fabricated on 2″ to 4″ wafer scales by nanosphere lithography. High‐aspect‐ratio junctions are made on a length scale similar to the thickness of optimized catalyst layers for water dissociation, creating a platform for probing the dual effects of catalysis and local electric field at the microscale BPM junction. Optimized polymer materials and nanoscale metal oxide catalysts are used in this study. 3D BPMs are tested under reverse and forward bias conditions, exhibiting superior performance relative to their 2D counterparts. Under forward bias in H2‐O2 fuel cells, 3D BPMs achieve a current density of 1500 mA cm−2, ≈7 times higher than 2D membranes made from the same materials.
- 9 November 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (12)
Open AccessBipolar Membranes With Controlled, Microscale 3D Junctions Enhance the Rates of Water Dissociation and Formation
A soft lithographic method is developed for making bipolar membranes (BPMs) with catalytic junctions formed from arrays of vertically oriented microscale cylinders. The membranes are cast from reusable polydimethylsiloxane (PDMS) molds made from silicon masters, which are fabricated on 2″ to 4″ wafer scales by nanosphere lithography. High‐aspect‐ratio junctions are made on a length scale similar to the thickness of optimized catalyst layers for water dissociation, creating a platform for probing the dual effects of catalysis and local electric field at the microscale BPM junction. Optimized polymer materials and nanoscale metal oxide catalysts are used in this study. 3D BPMs are tested under reverse and forward bias conditions, exhibiting superior performance relative to their 2D counterparts. Under forward bias in H2‐O2 fuel cells, 3D BPMs achieve a current density of 1500 mA cm−2, ≈7 times higher than 2D membranes made from the same materials.
- 20 June 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (26) , 18117-18127
Electron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core/Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures
The dynamics of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient absorption spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat band potential. Photoinduced electron injection in core/shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentrations of acetonitrile. In acetonitrile-rich electrolytes, electron injection is suppressed due to the very negative flat band potential of the TiO2 shell. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. Conduction band electrons in SnO2 are trapped at the core/shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye-sensitized SnO2/TiO2 core/shell photoanodes is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.
- 20 June 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (26) , 18117-18127
Electron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core/Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures
The dynamics of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient absorption spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat band potential. Photoinduced electron injection in core/shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentrations of acetonitrile. In acetonitrile-rich electrolytes, electron injection is suppressed due to the very negative flat band potential of the TiO2 shell. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. Conduction band electrons in SnO2 are trapped at the core/shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye-sensitized SnO2/TiO2 core/shell photoanodes is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.
- 18 June 2024
- Published by Springer Nature in Nature Reviews Chemistry
- Vol. 8 (8) , 566
Mind your electrolytes
- 18 June 2024
- Published by Springer Nature in Nature Reviews Chemistry
- Vol. 8 (8) , 566
Mind your electrolytes
- Open Access
- 25 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Electron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core-Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures
The dynamics and efficiency of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat-band potential. Photoinduced electron injection in core-shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentration of acetonitrile. In acetonitrile-rich electrolytes, despite the larger driving force, electron injection is suppressed. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. The intrinsic conduction band electrons in SnO2 are trapped at the core-shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye- sensitized SnO2/TiO2 core/shell photoanodes, measured on longer timescales, is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.
- 25 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessElectron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core-Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures
The dynamics and efficiency of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat-band potential. Photoinduced electron injection in core-shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentration of acetonitrile. In acetonitrile-rich electrolytes, despite the larger driving force, electron injection is suppressed. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. The intrinsic conduction band electrons in SnO2 are trapped at the core-shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye- sensitized SnO2/TiO2 core/shell photoanodes, measured on longer timescales, is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.
- 11 January 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (3) , 2267-2274
Tailoring Interfaces for Enhanced Methanol Production from Photoelectrochemical CO2 Reduction
Efficient and stable photoelectrochemical reduction of CO2 into highly reduced liquid fuels remains a formidable challenge, which requires an innovative semiconductor/catalyst interface to tackle. In this study, we introduce a strategy involving the fabrication of a silicon micropillar array structure coated with a superhydrophobic fluorinated carbon layer for the photoelectrochemical conversion of CO2 into methanol. The pillars increase the electrode surface area, improve catalyst loading and adhesion without compromising light absorption, and help confine gaseous intermediates near the catalyst surface. The superhydrophobic coating passivates parasitic side reactions and further enhances local accumulation of reaction intermediates. Upon one-electron reduction of the molecular catalyst, the semiconductor-catalyst interface changes from adaptive to buried junctions, providing a sufficient thermodynamic driving force for CO2 reduction. These structures together create a unique microenvironment for effective reduction of CO2 to methanol, leading to a remarkable Faradaic efficiency reaching 20% together with a partial current density of 3.4 mA cm-2, surpassing the previous record based on planar silicon photoelectrodes by a notable factor of 17. This work demonstrates a new pathway for enhancing photoelectrocatalytic CO2 reduction through meticulous interface and microenvironment tailoring and sets a benchmark for both Faradaic efficiency and current density in solar liquid fuel production.
- 11 January 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (3) , 2267-2274
Tailoring Interfaces for Enhanced Methanol Production from Photoelectrochemical CO2 Reduction
Efficient and stable photoelectrochemical reduction of CO2 into highly reduced liquid fuels remains a formidable challenge, which requires an innovative semiconductor/catalyst interface to tackle. In this study, we introduce a strategy involving the fabrication of a silicon micropillar array structure coated with a superhydrophobic fluorinated carbon layer for the photoelectrochemical conversion of CO2 into methanol. The pillars increase the electrode surface area, improve catalyst loading and adhesion without compromising light absorption, and help confine gaseous intermediates near the catalyst surface. The superhydrophobic coating passivates parasitic side reactions and further enhances local accumulation of reaction intermediates. Upon one-electron reduction of the molecular catalyst, the semiconductor-catalyst interface changes from adaptive to buried junctions, providing a sufficient thermodynamic driving force for CO2 reduction. These structures together create a unique microenvironment for effective reduction of CO2 to methanol, leading to a remarkable Faradaic efficiency reaching 20% together with a partial current density of 3.4 mA cm-2, surpassing the previous record based on planar silicon photoelectrodes by a notable factor of 17. This work demonstrates a new pathway for enhancing photoelectrocatalytic CO2 reduction through meticulous interface and microenvironment tailoring and sets a benchmark for both Faradaic efficiency and current density in solar liquid fuel production.
- Open Access
- 22 June 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (26) , 14260-14266
Direct Vibrational Stark Shift Probe of Quasi-Fermi Level Alignment in Metal Nanoparticle Catalyst-Based Metal–Insulator–Semiconductor Junction Photoelectrodes
Photoelectrodes consisting of metal-insulator-semiconductor (MIS) junctions are a promising candidate architecture for water splitting and for the CO2 reduction reaction (CO2RR). The photovoltage is an essential indicator of the driving force that a photoelectrode can provide for surface catalytic reactions. However, for MIS photoelectrodes that contain metal nanoparticles, direct photovoltage measurements at the metal sites under operational conditions remain challenging. Herein, we report a new in situ spectroscopic approach to probe the quasi-Fermi level of metal catalyst sites in heterogeneous MIS photoelectrodes via surface-enhanced Raman spectroscopy. Using a CO2RR photocathode, nanoporous p-type Si modified with Ag nanoparticles, as a prototype, we demonstrate a selective probe of the photovoltage of ∼0.59 V generated at the Si/SiOx/Ag junctions. Because it can directly probe the photovoltage of MIS heterogeneous junctions, this vibrational Stark probing approach paves the way for the thermodynamic evaluation of MIS photoelectrodes with varied architectural designs.
- 22 June 2023
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 145 (26) , 14260-14266
Open AccessDirect Vibrational Stark Shift Probe of Quasi-Fermi Level Alignment in Metal Nanoparticle Catalyst-Based Metal–Insulator–Semiconductor Junction Photoelectrodes
Photoelectrodes consisting of metal-insulator-semiconductor (MIS) junctions are a promising candidate architecture for water splitting and for the CO2 reduction reaction (CO2RR). The photovoltage is an essential indicator of the driving force that a photoelectrode can provide for surface catalytic reactions. However, for MIS photoelectrodes that contain metal nanoparticles, direct photovoltage measurements at the metal sites under operational conditions remain challenging. Herein, we report a new in situ spectroscopic approach to probe the quasi-Fermi level of metal catalyst sites in heterogeneous MIS photoelectrodes via surface-enhanced Raman spectroscopy. Using a CO2RR photocathode, nanoporous p-type Si modified with Ag nanoparticles, as a prototype, we demonstrate a selective probe of the photovoltage of ∼0.59 V generated at the Si/SiOx/Ag junctions. Because it can directly probe the photovoltage of MIS heterogeneous junctions, this vibrational Stark probing approach paves the way for the thermodynamic evaluation of MIS photoelectrodes with varied architectural designs.
- 19 August 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (34) , 39515-39523
Geometric and Scaling Effects in the Speed of Catalytic Enzyme Micropumps
Self-powered, biocompatible pumps in the nanometer to micron length scale have the potential to enable technology in several fields, including chemical analysis and medical diagnostics. Chemically powered, catalytic micropumps have been developed but are not able to function well in biocompatible environments due to their intolerance of salt solutions and the use of toxic fuels. In contrast, enzymatically powered catalytic pumps offer good biocompatibility, selectivity, and scalability, but their performance at length scales below a few millimeters, which is important to many of their possible applications, has not been well tested. Here, urease-based enzyme pumps of millimeter and micrometer dimensions were fabricated and studied. The scaling of the pumping velocity was measured experimentally and simulated by numerical modeling. Pumping speeds were analyzed accurately by eliminating Brownian noise from the data using enzyme patches between 5 mm and 350 μm in size. Pumping speeds of microns per second could be achieved with urease pumps and were fastest when the channel height exceeded the width of the catalytic pump patch. In all cases, pumping was weak when the dimensions of the patch were 100 μm or less. Experimental and simulation results were consistent with a density-driven pumping mechanism at all sizes studied and served as a framework for the in silico study of more complex two-dimensional (2D) and three-dimensional (3D) geometries. Attempts to create directional flow by juxtaposing inward and outward pumps were unsuccessful because of the symmetry of convection rolls produced by millimeter-size pump patches and the slow speeds of smaller pumps. However, simulations of a corrugated ratchet structure showed that directional pumping could be achieved with pump patches in the millimeter size range.
- 19 August 2022
- Published by American Chemical Society (ACS) in ACS Applied Materials & Interfaces
- Vol. 14 (34) , 39515-39523
Geometric and Scaling Effects in the Speed of Catalytic Enzyme Micropumps
Self-powered, biocompatible pumps in the nanometer to micron length scale have the potential to enable technology in several fields, including chemical analysis and medical diagnostics. Chemically powered, catalytic micropumps have been developed but are not able to function well in biocompatible environments due to their intolerance of salt solutions and the use of toxic fuels. In contrast, enzymatically powered catalytic pumps offer good biocompatibility, selectivity, and scalability, but their performance at length scales below a few millimeters, which is important to many of their possible applications, has not been well tested. Here, urease-based enzyme pumps of millimeter and micrometer dimensions were fabricated and studied. The scaling of the pumping velocity was measured experimentally and simulated by numerical modeling. Pumping speeds were analyzed accurately by eliminating Brownian noise from the data using enzyme patches between 5 mm and 350 μm in size. Pumping speeds of microns per second could be achieved with urease pumps and were fastest when the channel height exceeded the width of the catalytic pump patch. In all cases, pumping was weak when the dimensions of the patch were 100 μm or less. Experimental and simulation results were consistent with a density-driven pumping mechanism at all sizes studied and served as a framework for the in silico study of more complex two-dimensional (2D) and three-dimensional (3D) geometries. Attempts to create directional flow by juxtaposing inward and outward pumps were unsuccessful because of the symmetry of convection rolls produced by millimeter-size pump patches and the slow speeds of smaller pumps. However, simulations of a corrugated ratchet structure showed that directional pumping could be achieved with pump patches in the millimeter size range.