Colton Jacob Sheehan
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Colton Jacob Sheehan has a total of 62 co-authors. Here are the top co-authors by number of shared publications:
- Thomas E. Mallouk
Department of Chemistry, University of Pennsylvania, 231 S. 34th Street, Philadelphia, Pennsylvania 19104, United States
7 shared publications - Langqiu Xiao
Department of Chemistry, University of Pennsylvania, Philadelphia, Pennsylvania 19104, United States
6 shared publications Amy S. Metlay
Department of Chemistry, University of Pennsylvania, 231 S 34th St. Philadelphia, Pennsylvania 19104, United States
2 shared publications- Gary W. Brudvig
Department of Chemistry Yale University New Haven Connecticut USA
2 shared publications - Michael Zuerch
Department of Chemistry, University of California at Berkeley, Berkeley, USA
2 shared publications - Sa Suo
Department of Chemistry, Emory University, 1515 Dickey Drive, Atlanta, Georgia 30322, United States
2 shared publications
Latest Publications
- 1 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (19) , 9736-9753
In-situ Electrochemical Spectroscopic Ellipsometry Characterization of Polymer and MXene Films
In-situ electrochemical spectroscopic ellipsometry (EC-SE) can enable real-time monitoring of optical properties and thickness changes of surfaces and thin films. This method can provide a broad range of information on the evolution of the microenvironment of an electrode during electrochemical reactions. However, to avoid modeling artifacts, accurate data analysis is critical. Here, we outline key steps in data analysis that can help prevent overfitting and misinterpretation of results. For example, determining the refractive index of the electrolyte at the air/electrolyte interface, along with measurements of the electrode’s dielectric data in dry conditions, can yield more accurate results than simultaneous fitting of all parameters for the electrolyte and electrode. We also present detailed modeling strategies tailored to fitting in-situ cyclic voltammetry (CV) data on various types of thin films, by providing two distinct examples: the thickness change of catalyst polymer films due to swelling by the electrolyte, and the simultaneous change in thickness and optical properties of Ti3C2Tx MXene films due to both reversible (electrochromic effect) and irreversible (degradation) processes. These details can help guide the informed selection of models in similar conditions by providing practical guidelines. The step-by-step approach to modeling can be more broadly adopted to enhance the accuracy and reproducibility of EC-SE experiments for interfacial studies relevant to energy conversion and storage, as well as other electrochemical reactions.
- 1 October 2026
- Published by American Chemical Society (ACS) in Chemistry of Materials
- Vol. 38 (19) , 9736-9753
In-situ Electrochemical Spectroscopic Ellipsometry Characterization of Polymer and MXene Films
In-situ electrochemical spectroscopic ellipsometry (EC-SE) can enable real-time monitoring of optical properties and thickness changes of surfaces and thin films. This method can provide a broad range of information on the evolution of the microenvironment of an electrode during electrochemical reactions. However, to avoid modeling artifacts, accurate data analysis is critical. Here, we outline key steps in data analysis that can help prevent overfitting and misinterpretation of results. For example, determining the refractive index of the electrolyte at the air/electrolyte interface, along with measurements of the electrode’s dielectric data in dry conditions, can yield more accurate results than simultaneous fitting of all parameters for the electrolyte and electrode. We also present detailed modeling strategies tailored to fitting in-situ cyclic voltammetry (CV) data on various types of thin films, by providing two distinct examples: the thickness change of catalyst polymer films due to swelling by the electrolyte, and the simultaneous change in thickness and optical properties of Ti3C2Tx MXene films due to both reversible (electrochromic effect) and irreversible (degradation) processes. These details can help guide the informed selection of models in similar conditions by providing practical guidelines. The step-by-step approach to modeling can be more broadly adopted to enhance the accuracy and reproducibility of EC-SE experiments for interfacial studies relevant to energy conversion and storage, as well as other electrochemical reactions.
- 4 June 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (23) , 14880-14888
Automation of the Marangoni Effect for Making Well-Ordered and Transferable Colloidal Monolayers at the Air–Water Interface
The ability to efficiently create ordered colloidal monolayers on solid surfaces is critical for nanosphere lithography and related applications. We describe here a simple automated method for growing well-ordered 2D crystals of polystyrene spheres at an air-water interface and transferring them to silicon substrates on the wafer scale. The method exploits the Marangoni effect and is enhanced by surface treatment of both the basin for monolayer formation and the intended substrate for transfer. Quantitative image analysis of the sphere monolayers shows that the monolayer packing is improved by automation. Dual-droplet automation is shown to be useful for controlling 2D crystal growth and forming phase-separated monolayers from two different colloidal particle sizes.
- 4 June 2025
- Published by American Chemical Society (ACS) in Langmuir
- Vol. 41 (23) , 14880-14888
Automation of the Marangoni Effect for Making Well-Ordered and Transferable Colloidal Monolayers at the Air–Water Interface
The ability to efficiently create ordered colloidal monolayers on solid surfaces is critical for nanosphere lithography and related applications. We describe here a simple automated method for growing well-ordered 2D crystals of polystyrene spheres at an air-water interface and transferring them to silicon substrates on the wafer scale. The method exploits the Marangoni effect and is enhanced by surface treatment of both the basin for monolayer formation and the intended substrate for transfer. Quantitative image analysis of the sphere monolayers shows that the monolayer packing is improved by automation. Dual-droplet automation is shown to be useful for controlling 2D crystal growth and forming phase-separated monolayers from two different colloidal particle sizes.
- 26 March 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (7) , 5894-5905
Spatially Patterned Architectures to Modulate CO2 Reduction Cascade Catalysis Kinetics
- 26 March 2025
- Published by American Chemical Society (ACS) in ACS Catalysis
- Vol. 15 (7) , 5894-5905
Spatially Patterned Architectures to Modulate CO2 Reduction Cascade Catalysis Kinetics
- 6 March 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (11) , 9629-9639
Electron Transfer Energetics in Photoelectrochemical CO2 Reduction at Viologen Redox Polymer-Modified p-Si Electrodes
While redox polymer-mediated catalysis at silicon photoelectrodes has been studied since the 1980s, there have been few detailed studies of these materials in photoelectrochemical CO2 reduction. Here, we develop silicon photoelectrodes functionalized with a viologen-based polymer that mediates the formation of catalytic gold nanoparticles. The presence of gold was confirmed by X-ray photoelectron spectroscopy (XPS), and the nanoparticles were imaged with high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM). We probed the CO2 reduction process during bulk photoelectrolysis to find modest, yet consistent CO faradaic efficiencies across a range of applied potentials. Operando surface-enhanced Raman spectroscopy (SERS) was used to measure the Fermi levels of both the viologen polymer and the Au catalyst sites. The operando measurement of the Fermi levels of all three components of the photocathode provides a unified picture of the electron transfer process in the semiconductor-redox polymer-catalyst system. The redox polymer serves as the electron transfer mediator between the Si substrate and Au sites. In addition, the Au Fermi level equilibrates with the Fermi level of the viologen polymer, which in turn fixes the quasi-Fermi level of Au catalysts at the p-Si/redox polymer interface. This suggests a potential future direction of using redox polymers with tunable potentials to modulate the potential of metal cocatalysts and thus control the reaction selectivity.
- 6 March 2025
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 147 (11) , 9629-9639
Electron Transfer Energetics in Photoelectrochemical CO2 Reduction at Viologen Redox Polymer-Modified p-Si Electrodes
While redox polymer-mediated catalysis at silicon photoelectrodes has been studied since the 1980s, there have been few detailed studies of these materials in photoelectrochemical CO2 reduction. Here, we develop silicon photoelectrodes functionalized with a viologen-based polymer that mediates the formation of catalytic gold nanoparticles. The presence of gold was confirmed by X-ray photoelectron spectroscopy (XPS), and the nanoparticles were imaged with high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM). We probed the CO2 reduction process during bulk photoelectrolysis to find modest, yet consistent CO faradaic efficiencies across a range of applied potentials. Operando surface-enhanced Raman spectroscopy (SERS) was used to measure the Fermi levels of both the viologen polymer and the Au catalyst sites. The operando measurement of the Fermi levels of all three components of the photocathode provides a unified picture of the electron transfer process in the semiconductor-redox polymer-catalyst system. The redox polymer serves as the electron transfer mediator between the Si substrate and Au sites. In addition, the Au Fermi level equilibrates with the Fermi level of the viologen polymer, which in turn fixes the quasi-Fermi level of Au catalysts at the p-Si/redox polymer interface. This suggests a potential future direction of using redox polymers with tunable potentials to modulate the potential of metal cocatalysts and thus control the reaction selectivity.
- Open Access
- 9 November 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (12)
Bipolar Membranes With Controlled, Microscale 3D Junctions Enhance the Rates of Water Dissociation and Formation
A soft lithographic method is developed for making bipolar membranes (BPMs) with catalytic junctions formed from arrays of vertically oriented microscale cylinders. The membranes are cast from reusable polydimethylsiloxane (PDMS) molds made from silicon masters, which are fabricated on 2″ to 4″ wafer scales by nanosphere lithography. High‐aspect‐ratio junctions are made on a length scale similar to the thickness of optimized catalyst layers for water dissociation, creating a platform for probing the dual effects of catalysis and local electric field at the microscale BPM junction. Optimized polymer materials and nanoscale metal oxide catalysts are used in this study. 3D BPMs are tested under reverse and forward bias conditions, exhibiting superior performance relative to their 2D counterparts. Under forward bias in H2‐O2 fuel cells, 3D BPMs achieve a current density of 1500 mA cm−2, ≈7 times higher than 2D membranes made from the same materials.
- 9 November 2024
- Published by Wiley in Advanced Energy Materials
- Vol. 15 (12)
Open AccessBipolar Membranes With Controlled, Microscale 3D Junctions Enhance the Rates of Water Dissociation and Formation
A soft lithographic method is developed for making bipolar membranes (BPMs) with catalytic junctions formed from arrays of vertically oriented microscale cylinders. The membranes are cast from reusable polydimethylsiloxane (PDMS) molds made from silicon masters, which are fabricated on 2″ to 4″ wafer scales by nanosphere lithography. High‐aspect‐ratio junctions are made on a length scale similar to the thickness of optimized catalyst layers for water dissociation, creating a platform for probing the dual effects of catalysis and local electric field at the microscale BPM junction. Optimized polymer materials and nanoscale metal oxide catalysts are used in this study. 3D BPMs are tested under reverse and forward bias conditions, exhibiting superior performance relative to their 2D counterparts. Under forward bias in H2‐O2 fuel cells, 3D BPMs achieve a current density of 1500 mA cm−2, ≈7 times higher than 2D membranes made from the same materials.
- 9 July 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (29) , 20086-20091
Fast Outer-Sphere Electron Transfer and High Specific Capacitance at Covalently Modified Carbon Electrodes
Carbon electrodes typically display sluggish electron transfer kinetics due to the adsorption of adventitious molecules that effectively insulate the surface. Here, we describe a method for rendering graphitic carbon electrodes permanently hydrophilic by functionalization with 4-(diazonium)benzenesulfonic acid. In aqueous electrolytes, these hydrophilic carbon electrodes exhibit metal-like specific capacitance (∼40 μF/cm2) as measured by cyclic voltammetry, suggesting a change in the double-layer structure at the carbon surface. Additionally, the modified electrodes show fast charge transfer kinetics to outer-sphere one-electron redox couples such as ferro-/ferricyanide as well as improved electron transfer kinetics in alkaline aqueous redox flow batteries.
- 9 July 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (29) , 20086-20091
Fast Outer-Sphere Electron Transfer and High Specific Capacitance at Covalently Modified Carbon Electrodes
Carbon electrodes typically display sluggish electron transfer kinetics due to the adsorption of adventitious molecules that effectively insulate the surface. Here, we describe a method for rendering graphitic carbon electrodes permanently hydrophilic by functionalization with 4-(diazonium)benzenesulfonic acid. In aqueous electrolytes, these hydrophilic carbon electrodes exhibit metal-like specific capacitance (∼40 μF/cm2) as measured by cyclic voltammetry, suggesting a change in the double-layer structure at the carbon surface. Additionally, the modified electrodes show fast charge transfer kinetics to outer-sphere one-electron redox couples such as ferro-/ferricyanide as well as improved electron transfer kinetics in alkaline aqueous redox flow batteries.
- 20 June 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (26) , 18117-18127
Electron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core/Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures
The dynamics of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient absorption spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat band potential. Photoinduced electron injection in core/shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentrations of acetonitrile. In acetonitrile-rich electrolytes, electron injection is suppressed due to the very negative flat band potential of the TiO2 shell. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. Conduction band electrons in SnO2 are trapped at the core/shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye-sensitized SnO2/TiO2 core/shell photoanodes is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.
- 20 June 2024
- Published by American Chemical Society (ACS) in Journal of the American Chemical Society
- Vol. 146 (26) , 18117-18127
Electron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core/Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures
The dynamics of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient absorption spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat band potential. Photoinduced electron injection in core/shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentrations of acetonitrile. In acetonitrile-rich electrolytes, electron injection is suppressed due to the very negative flat band potential of the TiO2 shell. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. Conduction band electrons in SnO2 are trapped at the core/shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye-sensitized SnO2/TiO2 core/shell photoanodes is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.
- 18 June 2024
- Published by Springer Nature in Nature Reviews Chemistry
- Vol. 8 (8) , 566
Mind your electrolytes
- 18 June 2024
- Published by Springer Nature in Nature Reviews Chemistry
- Vol. 8 (8) , 566
Mind your electrolytes
- Open Access
- 25 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Electron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core-Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures
The dynamics and efficiency of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat-band potential. Photoinduced electron injection in core-shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentration of acetonitrile. In acetonitrile-rich electrolytes, despite the larger driving force, electron injection is suppressed. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. The intrinsic conduction band electrons in SnO2 are trapped at the core-shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye- sensitized SnO2/TiO2 core/shell photoanodes, measured on longer timescales, is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.
- 25 April 2024
- Published by American Chemical Society (ACS) in ChemRxiv
Open AccessElectron Transfer Dynamics at Dye-Sensitized SnO2/TiO2 Core-Shell Electrodes in Aqueous/Nonaqueous Electrolyte Mixtures
The dynamics and efficiency of photoinduced electron transfer were measured at dye-sensitized photoanodes in aqueous (acetate buffer), nonaqueous (acetonitrile), and mixed solvent electrolytes by nanosecond transient spectroscopy (TAS) and ultrafast optical-pump terahertz-probe spectroscopy (OPTP). Higher injection efficiencies were found in mixed solvent electrolytes for dye-sensitized SnO2/TiO2 core/shell electrodes, whereas the injection efficiency of dye-sensitized TiO2 electrodes decreased with the increasing acetonitrile concentration. The trend in injection efficiency for the TiO2 electrodes was consistent with the solvent-dependent trend in the semiconductor flat-band potential. Photoinduced electron injection in core-shell electrodes has been understood as a two-step process involving ultrafast electron trapping in the TiO2 shell followed by slower electron transfer to the SnO2 core. The driving force for shell-to-core electron transfer increases as the flat band potential of TiO2 shifts negatively with increasing concentration of acetonitrile. In acetonitrile-rich electrolytes, despite the larger driving force, electron injection is suppressed. Interestingly, a net negative photoconductivity in the SnO2 core is observed in mixed solvent electrolytes by OPTP. We hypothesize that an electric field is formed across the TiO2 shell from the oxidized dye molecules after injection. The intrinsic conduction band electrons in SnO2 are trapped at the core-shell interface by the electric field, resulting in a negative photoconductivity transient. The overall electron injection efficiency of the dye- sensitized SnO2/TiO2 core/shell photoanodes, measured on longer timescales, is optimized in mixed solvents. The ultrafast transient conductivity data illustrate the crucial role of the electrolyte in regulating the driving forces for electron injection and charge separation at dye-sensitized semiconductor interfaces.
- Open Access
- 4 November 2020
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 8
Two-Dimensional Metal Organic Framework Nanosheets as Bifunctional Catalyst for Electrochemical and Photoelectrochemical Water Oxidation
Electrochemical (EC) and photoelectrochemical (PEC) water splitting represent promising strategies for renewable energy conversion and fuel production and require design of efficient catalysts for the oxygen evolution reaction (OER). Herein, we report the synthesis of two-dimensional (2D) Co-based metal organic framework (Co-MOF) nanosheets and their bifunctional catalytic properties for both EC and PEC OER. Benefiting from the large surface area and abundant isolated metal active sites, the Co-MOF nanosheets exhibited excellent OER activity and stability. The efficient electron–hole generation and separation of the nanosheets, owing to dimensional confinement, contributed to an improved visible light response in PEC OER. This study presents a new strategy to design EC/PEC bifunctional catalyst utilizing unique structural and electronic features of 2D MOF.
- 4 November 2020
- Published by Frontiers Media SA in Frontiers in Chemistry
- Vol. 8
Open AccessTwo-Dimensional Metal Organic Framework Nanosheets as Bifunctional Catalyst for Electrochemical and Photoelectrochemical Water Oxidation
Electrochemical (EC) and photoelectrochemical (PEC) water splitting represent promising strategies for renewable energy conversion and fuel production and require design of efficient catalysts for the oxygen evolution reaction (OER). Herein, we report the synthesis of two-dimensional (2D) Co-based metal organic framework (Co-MOF) nanosheets and their bifunctional catalytic properties for both EC and PEC OER. Benefiting from the large surface area and abundant isolated metal active sites, the Co-MOF nanosheets exhibited excellent OER activity and stability. The efficient electron–hole generation and separation of the nanosheets, owing to dimensional confinement, contributed to an improved visible light response in PEC OER. This study presents a new strategy to design EC/PEC bifunctional catalyst utilizing unique structural and electronic features of 2D MOF.