HHHouria Hebhoub

Houria Hebhoub

*This is an algorithmically generated author record based on publicly available information.

Current Organizations / Institutes

The organizations/institutes from the scholar's latest article


Houria Hebhoub has a total of 37 co-authors. Here are the top co-authors by number of shared publications:


Latest Publications

  • Three-dimensional numerical analysis of rock deformation in underground mining excavations ‒ Boukhadra iron mine (Algeria)

    by H Mezzoudj, S Berdoudi, H Hebhoub

    Purpose. Assessing the stability of underground mine workings excavated in fractured rock masses, deformation and failure of jointed rock masses. Methodology. A numerical model was developed using FLAC3D v6 to reproduce: 1) in situ conditions for the gallery in its natural state without support, 2) the gallery after a geometric modification, and 3) the gallery after installation of a steel set support system. Findings. The application of the proposed method gave a satisfactory result. The results show that the different lithological units exhibit contrasted mechanical responses governed by their physico-mechanical properties. The numerical simulations indicate that some sections of the gallery can remain stable without support, whereas others require reinforcement to ensure safe serviceability. Originality. The use of three-dimensional numerical analysis of rock deformation with FLAC3D v6, and the selection of an appropriate support system to resolve the practical and technical constraints encountered during ore extraction under the conditions of the Boukhadra mine (Tébessa, Algeria). Practical value. Numerical simulations indicate that certain sections of the gallery require reinforcement to ensure their safe operation. Geometric modifications have reduced displacements in these areas, and the installation of steel reinforcement has significantly improved the gallery’s overall stability. As a result, displacements have been significantly reduced in both directions, by approximately 96 and 99 %, respectively.

  • Open Access

    Assessment of Mechanical Behavior and Microstructure of Unsaturated Polyester Resin Composites Reinforced with Recycled Marble Waste

    by Rahima Baghloul, Laidi Babouri, Houria Hebhoub, Fouad Boukhelf, Yassine El Mendili

    The quarrying and utilization of natural stones such as marble and granite are growing rapidly in developing countries. However, the processing, cutting, sizing, and shaping of these stones to render them functional generates huge quantities of waste and dust. These materials are often disposed of openly in the environment, and their potentially hazardous nature has negative repercussions on both the environment and human health. In this study, marble waste (MW) was used as a filler in the unsaturated polyester resin (UPR) matrix to enhance performance and characteristics while adding value to the waste and minimizing manufacturing costs. For this purpose, samples of UPR/MW composites were produced with 0, 5, 10, 15, and 20 wt.% of MW incorporated into the UPR. A full characterization that focused on the microstructure, thermal stability, and physical and mechanical properties was carried out. The results revealed that the use of 10 to 15% of MW improves mechanical performance, with increases from 17 to 26 kJ/m2, 14 to 17 MPa, and 794 to 1522 GPa in impact strength, tensile strength, and elastic modulus, respectively. By introducing a 20% MW filler, the composite loses its performance, particularly Shore D hardness, and becomes very brittle. Thermogravimetric analysis (TGA) indicated significant thermal stabilization, with a delay in the start decomposition temperature of 28 °C for 20 UPR/MW compared to 0 UPR/MW. Additionally, morphological and microstructural tests, namely, FT-IR, XRD, and SEM analysis, show a microstructural change, including the formation of crystalline phases, enhancing matrix-filler interactions due to the creation of Mg-O and Ca-O chemical bonds and the forming of filler agglomeration at high introduction rates that lead to defects in the microstructure. These results confirmed the mechanical results of the UPR/MW composites.


  • The Effect of Recycled Fibers on the Mechanical Properties and Durability of Sand Concrete

    by Hamid Alsayadi, Nacera Khaldi, Houria Hebhoub, Chaher Rihia, Mohammed Ichem Benhalilou, Karima Messaoudi

    Recycling waste in construction materials is part of a sustainable development approach aimed at creating new materials with characteristics that have been shown to be competitive with traditional materials. In this context, this study aims to recover steel, copper and aluminum wastes from blacksmiths’ workshops together with the reuse thereof in the form of reinforcing fibers in sand concrete. However, in order to assess the impact of this waste on the concrete properties, we introduced such wastes in the form of fibers at different proportions (0.4 %, 0.8 % and 1.2 %). Further, a series of tests was then carried out to determine the evolution of the concrete characteristics in the fresh state (workability and density) and in the hardened state (compressive strength, flexural strength, compressive strength obtained using a sclerometer and the speed of ultrasonic waves), as well as the concrete’s durability (absorption coefficient by immersion, by capillarity and the porosity accessible to water). In closing, the behavior of the concrete was assessed in the face of a chemical attack by H2SO4 and HCl by measuring mass loss. In virtue of thus, the results obtained demonstrated a positive evolution of certain properties of sand concrete as a function of the type and percentage of fibers incorporated into the composition of the concrete.


  • Mechanical, durability and microstructure properties of eco-friendly sand concrete incorporating cane ash

    by Razika. Charime, Assia. Abdelouahed, Houria. Hebhoub, Mouloud. Belachia, Karima. Messaoudi


  • Open Access

    THE COMPARATIVE STUDY OF THE PERFORMANCE OF CONCRETE MADE FROM RECYCLED SAND

    by Chiraz Kechkar, Leila Kherraf, Assia Abdelouahid, Houria Hebhoub

    The main objective of this study of research is to initiate and develop a comparative study of fresh and hardened properties of concretes made from recycled sand from three types of waste: marble waste, tiling waste and cinder block waste. And this, in the intention of contributing to the world effort relating to the preserve of natural aggregate resources and limit landfill to the ultimate waste thresholds. To do this, in the composition of a current concrete with a water / cement ratio equal to 0.55, an equivalent volume of sand from the three wastes respectively replaced a volume of 15% of the ordinary sand. The properties in the fresh state: workability, air content and density and in the hardened state: compressive strength, Flexural tensile strength, compressive strength determined with non-destructive tests, water absorption by immersion, absorption by capillarity and chloride penetration of the various concretes produced are analyzed, and compared to those of the control concrete. The results obtained show that the concretes containing the waste sands have acceptable characteristics. However, tiling waste sand performs better than the other two recycled sands.


  • Open Access

    The Effect of Plastic Waste Fibers on Mortar Performance

    by Wassila Mouats, Assia Abdelouahed, Houria Hebhoub, Wassila Boughamsa

    This paper studies the possibility of using plastic waste fiber in the mortar, and aims to find the optimum percentage of fiber to improve the properties of mortar. The plastic fiber is used as a volume substitution in dune sand and it used with rates of 5%, 10%, 15%, 20%, 25%, and 30%. Specifically, the mechanical properties as compressive and tensile strength and durability performance as capillary and immersion absorption, the depth of chloride penetration and the loss of weight were measured. The results show that the incorporation of waste plastic fiber reduces the compressive strength and enhances the flexural tensile strength. The use of waste plastic fibers indicates the good behavior to mortars in aggressive environment.


  • Open Access

    Introduction of Marble Waste Sand in the Composition of Mortar

    by Hebhoub Houria, Kherraf Leila, Abdelouahed Assia, Belachia Mouloud

    The aim of this research is to study the possibility of the valorization of sand marble waste in mortars as substitute in sand. To achieve this study, sand marble waste is used with weight ratios of 5, 10, 15 and 20% to formulate a mortar with sand marble waste and a control mortar with 0% of sand marble waste. The properties in the fresh state, the mechanical strength, absorption by immersion, and the weight loss as well as the shrinkage and acid attack of each mixture were carried out through the conducted experiments. The different results show that the introduction of recycled sand in the mortars gives good results and it can be used as aggregates.


  • Influence of the Incorporation of Cement Kiln Dust on the Properties of Cement- Performance and Durability

    by Leila Kherraf, Houria Hebhoub, Mouloud Belachia, Assia Abdelouehed, Razika Charime, Oussama Bouhebila

    Influence of the Incorporation of Cement Kiln Dust on the Properties of Cement- Performance and Durability


  • Open Access

    Reusing tiling waste in the construction of pavements

    by Loubna Belakhdar, Mouloud Belachia, Houria Hebhoub

    The factories of tiles manufacturing, ceramics, marble, tile and brick generate an important quantity of waste, their recovery meets economic and environmental objectives. The objective of our research is to study the possibility of the reuse of tile manufacturing waste as aggregates in the construction of pavements. To carry out this experimental study we have made characterization tests on all the materials used. The study investigates the influence of substitution of recycled tarred waste aggregates in mixtures of bituminous gravels with rates of 10, 20 and 30% on mechanical performance (Duriez stability) and compared the results obtained with composite control samples ordinary aggregates (0%). The results obtained show that the introduction of tiling waste into the formulation of a severe bituminous material has a positive influence on the mechanical performance.