Marek Neruda
Current Organizations / Institutes
The organizations/institutes from the scholar's latest article
Research Subjects
Marek Neruda has a total of 51 co-authors. Here are the top co-authors by number of shared publications:
- Lukas Vojtech
Department of Telecommunication Engineering, Faculty of Electrical Engineering, Czech Technical University in Prague, Technicka 2, 166 27 Prague, Czech Republic
29 shared publications - Radoslav Bortel
Faculty of Electrical Engineering, Czech Technical University, Technicka 2, Prague, Czech Republic
4 shared publications Tomas Zitta
4 shared publicationsJiri Hajek
3 shared publicationsJiri Skapa
3 shared publicationsTomas Korinek
3 shared publications
Latest Publications
- 2 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. PP (0018926X) , 1
A Radiometric Fraunhofer Diffraction Model for Hybrid Graphical Ray Tracing in Urban Radio Propagation
This paper introduces a hybrid framework combining graphical ray-tracing with Edge-based Light Diffraction for rapid, city-scale radio signal propagation prediction. Grounded in Fraunhofer diffraction theory, the framework’s core novelty is a pre-computation pipeline that transforms building edges into secondary, directional emitters by encoding their complete first-order diffraction field into standard Illuminating Engineering Society photometric profiles. This receiver-independent formulation deliberately operates in the intensity domain—omitting phase-dependent effects—to enable the direct and rapid prediction of the local mean power (power envelope), a methodological choice optimized for macro-scale coverage assessment rather than for detailed, small-scale channel modeling. The resulting framework generates coverage maps in tens of seconds, with performance that remains stable at high resolutions where conventional receiver-dependent solvers become computationally prohibitive. Validation against an independent test dataset from urban drive-test measurements demonstrates a root-mean-square error of (7.27 ± 0.40) dB and a Pearson correlation of R = 0.80 ± 0.08. The proposed framework provides a physically interpretable and scalable pathway for leveraging graphical computing techniques for practical, non-line-of-sight radio network planning.
- 2 June 2026
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. PP (0018926X) , 1
A Radiometric Fraunhofer Diffraction Model for Hybrid Graphical Ray Tracing in Urban Radio Propagation
This paper introduces a hybrid framework combining graphical ray-tracing with Edge-based Light Diffraction for rapid, city-scale radio signal propagation prediction. Grounded in Fraunhofer diffraction theory, the framework’s core novelty is a pre-computation pipeline that transforms building edges into secondary, directional emitters by encoding their complete first-order diffraction field into standard Illuminating Engineering Society photometric profiles. This receiver-independent formulation deliberately operates in the intensity domain—omitting phase-dependent effects—to enable the direct and rapid prediction of the local mean power (power envelope), a methodological choice optimized for macro-scale coverage assessment rather than for detailed, small-scale channel modeling. The resulting framework generates coverage maps in tens of seconds, with performance that remains stable at high resolutions where conventional receiver-dependent solvers become computationally prohibitive. Validation against an independent test dataset from urban drive-test measurements demonstrates a root-mean-square error of (7.27 ± 0.40) dB and a Pearson correlation of R = 0.80 ± 0.08. The proposed framework provides a physically interpretable and scalable pathway for leveraging graphical computing techniques for practical, non-line-of-sight radio network planning.
- Open Access
- 18 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 280-283
DMap-Zero: A Lightweight Security-First Platform for Distributed IoT Applications
- 18 November 2025
- Published by Association for Computing Machinery (ACM)
- p. 280-283
Open AccessDMap-Zero: A Lightweight Security-First Platform for Distributed IoT Applications
- 13 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (7) , 6045-6059
Graphical Heatmap-Based Approach to Indoor Radio Signal Propagation: Adapting Advanced Ray Tracing and Global Illumination Algorithms
This paper presents a novel approach for simulating indoor radio signal propagation through a heatmap-based strategy, harnessing advanced ray tracing and global illumination algorithms. Utilising the desktop modeller SketchUp for 3D environmental design and the V-Ray plugin for ray tracing, this methodology leverages the spatial analysis of the light intensity. The process can be adjusted to various parameters of materials, including those that are intrinsically specular and transparent or are simulated as such, e.g. certain walls and windows. This generates a comprehensive heatmap of the predicted RSSI level of the radio signal. Unlike traditional empirical models, prone to inaccuracy with increasing complexity, and deterministic models, experiencing significant prediction time escalation with complexity, this approach provides a thorough view of signal propagation in complex architectural environments. It accounts for material properties that affect signal propagation, which are often overlooked by conventional models. Additionally, it exploits advanced graphics domain techniques, balancing accuracy and detail. The efficacy and accuracy of this approach are evaluated for Wi-Fi technology, and this approach is validated against established methods like the empirical multi-wall model and the deterministic multi-resolution frequency-domain ParFlow method. A balance is achieved between precision, with a maximum deviation of 14.7% for RSSI = -100 dBm, and computational efficiency, with rendering times typically ranging from units to tens of seconds at specific resolutions from 2 cm/pixel to 5 cm/pixel. RMSE values between 5 dB and 8 dB are deemed acceptable, showcasing the approach’s robustness and practical applicability.
- 13 June 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Transactions on Antennas and Propagation
- Vol. 72 (7) , 6045-6059
Graphical Heatmap-Based Approach to Indoor Radio Signal Propagation: Adapting Advanced Ray Tracing and Global Illumination Algorithms
This paper presents a novel approach for simulating indoor radio signal propagation through a heatmap-based strategy, harnessing advanced ray tracing and global illumination algorithms. Utilising the desktop modeller SketchUp for 3D environmental design and the V-Ray plugin for ray tracing, this methodology leverages the spatial analysis of the light intensity. The process can be adjusted to various parameters of materials, including those that are intrinsically specular and transparent or are simulated as such, e.g. certain walls and windows. This generates a comprehensive heatmap of the predicted RSSI level of the radio signal. Unlike traditional empirical models, prone to inaccuracy with increasing complexity, and deterministic models, experiencing significant prediction time escalation with complexity, this approach provides a thorough view of signal propagation in complex architectural environments. It accounts for material properties that affect signal propagation, which are often overlooked by conventional models. Additionally, it exploits advanced graphics domain techniques, balancing accuracy and detail. The efficacy and accuracy of this approach are evaluated for Wi-Fi technology, and this approach is validated against established methods like the empirical multi-wall model and the deterministic multi-resolution frequency-domain ParFlow method. A balance is achieved between precision, with a maximum deviation of 14.7% for RSSI = -100 dBm, and computational efficiency, with rendering times typically ranging from units to tens of seconds at specific resolutions from 2 cm/pixel to 5 cm/pixel. RMSE values between 5 dB and 8 dB are deemed acceptable, showcasing the approach’s robustness and practical applicability.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (16) , 27463-27479
Fractal-Based N-Environment Multiagent IoT System Reliability
The tremendous growth of Internet of Things (IoT) systems and the popularity of distributed systems, which were brought back into fashion by containerization, create new challenges for system maintenance. Each IoT-specific service is characterized by a specific domain, or environment, making the maintenance of distributed IoT systems with dozens of agents a challenging task. This article proposes a fractal-based mathematical model, called the fractal multiagent IoT system (FMAIS), for scalable multiagent systems (e.g., cloud-native services, wide-scale IoT services). A reliability estimation model called the multienvironment enhanced real-time customer-oriented reliability estimation (ME-ERT-CORE) model is proposed as a method for estimating the reliability of a multiagent IoT system, where each agent can be specified by its own domain-specific environment (e.g., healthcare, logistics, smart factories, etc.). An estimation of the time complexity of the FMAIS is performed, and a model called ME-ERT-CORE for estimating its reliability is formulated. The results show that the FMAIS can be used for real-time simulations of system behavior and ME-ERT-CORE can be used for the real-time estimation of its reliability, monitoring purposes, and, for instance, Quality-of-Service (QoS) descriptions based on service level agreement (SLA) requirements. The conducted measurements show that the reliability of the FMAIS with four layers and 96 applications, where each application deploys 96 instances, can be computed in 8.022 ms. With the proposed optimization method, the reliability for the same FMAIS can be computed in 0.219 ms, which is 36 times faster than the ME-ERT-CORE reliability evaluation based on the definition. An FMAIS with the aforementioned parameters can be simulated in 84.300 ms.
- 8 May 2024
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Internet of Things Journal
- Vol. 11 (16) , 27463-27479
Fractal-Based N-Environment Multiagent IoT System Reliability
The tremendous growth of Internet of Things (IoT) systems and the popularity of distributed systems, which were brought back into fashion by containerization, create new challenges for system maintenance. Each IoT-specific service is characterized by a specific domain, or environment, making the maintenance of distributed IoT systems with dozens of agents a challenging task. This article proposes a fractal-based mathematical model, called the fractal multiagent IoT system (FMAIS), for scalable multiagent systems (e.g., cloud-native services, wide-scale IoT services). A reliability estimation model called the multienvironment enhanced real-time customer-oriented reliability estimation (ME-ERT-CORE) model is proposed as a method for estimating the reliability of a multiagent IoT system, where each agent can be specified by its own domain-specific environment (e.g., healthcare, logistics, smart factories, etc.). An estimation of the time complexity of the FMAIS is performed, and a model called ME-ERT-CORE for estimating its reliability is formulated. The results show that the FMAIS can be used for real-time simulations of system behavior and ME-ERT-CORE can be used for the real-time estimation of its reliability, monitoring purposes, and, for instance, Quality-of-Service (QoS) descriptions based on service level agreement (SLA) requirements. The conducted measurements show that the reliability of the FMAIS with four layers and 96 applications, where each application deploys 96 instances, can be computed in 8.022 ms. With the proposed optimization method, the reliability for the same FMAIS can be computed in 0.219 ms, which is 36 times faster than the ME-ERT-CORE reliability evaluation based on the definition. An FMAIS with the aforementioned parameters can be simulated in 84.300 ms.
- Open Access
- 1 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (21) , 11065
Simulation of Radio Signal Propagation for UHF RFID Technology in an Indoor Environment Using Ray Tracing (Graphics) Method
RFID systems are often used in industry to reduce costs, increase process efficiency and minimize human intervention. The challenge is to design an RFID system before it is implemented in a specific environment in the shortest possible time and at minimum cost while maintaining the accuracy of the results. In this paper, a new approach to predicting indoor UHF RFID signal coverage is presented. It is based on a graphical ray tracing method. Simulations are performed based on spatial analysis of the illumination of a 3D indoor environment created from a 2D floor plan. The results show a heat map representing the predicted RSSI radio signal levels using a color range. The approach is validated by comparison with the results of the empirical Multi-Wall model. The time complexity of the approach is presented. The proposed approach is able to generate a heat map with the accuracy of the empirical Multi-Wall model. The interior room equipment required to refine the results ought to be investigated in the future.
- 1 November 2022
- Published by MDPI AG in Applied Sciences
- Vol. 12 (21) , 11065
Open AccessSimulation of Radio Signal Propagation for UHF RFID Technology in an Indoor Environment Using Ray Tracing (Graphics) Method
RFID systems are often used in industry to reduce costs, increase process efficiency and minimize human intervention. The challenge is to design an RFID system before it is implemented in a specific environment in the shortest possible time and at minimum cost while maintaining the accuracy of the results. In this paper, a new approach to predicting indoor UHF RFID signal coverage is presented. It is based on a graphical ray tracing method. Simulations are performed based on spatial analysis of the illumination of a 3D indoor environment created from a 2D floor plan. The results show a heat map representing the predicted RSSI radio signal levels using a color range. The approach is validated by comparison with the results of the empirical Multi-Wall model. The time complexity of the approach is presented. The proposed approach is able to generate a heat map with the accuracy of the empirical Multi-Wall model. The interior room equipment required to refine the results ought to be investigated in the future.
- Open Access
- 27 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 2578-2590
Resource Efficient Real-Time Reliability Model for Multi-Agent IoT Systems
Rising demand for the integration of IoT services in cloud computing has brought cloud-native principles (e.g., system automation, loosely coupled services, etc.) to the edge of the network. A fundamental element of the cloud-native approach is a microservice — an instance, which is usually virtualised, serving for only a defined purpose. Virtualised microservices are mostly used in cloud-based IoT systems, which can be covered with multi-agent system (MAS) paradigm. The maintenance of a MAS requires a constant monitoring to track the system state and to satisfy the service level agreement (SLA) (or any other) requirements. This paper presents a resource efficient reliability model for MAS IoT systems for monitoring purposes. First, we provide a thorough mathematical analysis to describe the generic system model and its elements. This model takes into account SLA requirements and it is characterised with linear time complexity, simplicity of computations and input metrics (e.g., combination of SLA for CPU and its workload), where all of the input data are aligned to the same range. Then, we evaluate time complexity and provide a measurement to demonstrate the reliability of the model application. The results show that the proposed model is efficient for large number of the IoT agents. It is approximately 98 times faster in computation with 1,000 systems when compared with [D. Ursino, et al. , 2020] and 51 times faster in computations with 1,000 systems when compared with [J. Yao, et al. , 2019].
- 27 December 2021
- Published by Institute of Electrical and Electronics Engineers (IEEE) in IEEE Access
- Vol. 10, 2578-2590
Open AccessResource Efficient Real-Time Reliability Model for Multi-Agent IoT Systems
Rising demand for the integration of IoT services in cloud computing has brought cloud-native principles (e.g., system automation, loosely coupled services, etc.) to the edge of the network. A fundamental element of the cloud-native approach is a microservice — an instance, which is usually virtualised, serving for only a defined purpose. Virtualised microservices are mostly used in cloud-based IoT systems, which can be covered with multi-agent system (MAS) paradigm. The maintenance of a MAS requires a constant monitoring to track the system state and to satisfy the service level agreement (SLA) (or any other) requirements. This paper presents a resource efficient reliability model for MAS IoT systems for monitoring purposes. First, we provide a thorough mathematical analysis to describe the generic system model and its elements. This model takes into account SLA requirements and it is characterised with linear time complexity, simplicity of computations and input metrics (e.g., combination of SLA for CPU and its workload), where all of the input data are aligned to the same range. Then, we evaluate time complexity and provide a measurement to demonstrate the reliability of the model application. The results show that the proposed model is efficient for large number of the IoT agents. It is approximately 98 times faster in computation with 1,000 systems when compared with [D. Ursino, et al. , 2020] and 51 times faster in computations with 1,000 systems when compared with [J. Yao, et al. , 2019].
- Open Access
- 30 November 2021
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 18 (23) , 12642
Methodology of Studying Effects of Mobile Phone Radiation on Organisms: Technical Aspects
The negative influence of non-ionizing electromagnetic radiation on organisms, including humans, has been discussed widely in recent years. This paper deals with the methodology of examining possible harmful effects of mobile phone radiation, focusing on in vivo and in vitro laboratory methods of investigation and evaluation and their main problems and difficulties. Basic experimental parameters are summarized and discussed, and recent large studies are also mentioned. For the laboratory experiments, accurate setting and description of dosimetry are essential; therefore, we give recommendations for the technical parameters of the experiments, especially for a well-defined source of radiation by Software Defined Radio.
- 30 November 2021
- Published by MDPI AG in International Journal of Environmental Research and Public Health
- Vol. 18 (23) , 12642
Open AccessMethodology of Studying Effects of Mobile Phone Radiation on Organisms: Technical Aspects
The negative influence of non-ionizing electromagnetic radiation on organisms, including humans, has been discussed widely in recent years. This paper deals with the methodology of examining possible harmful effects of mobile phone radiation, focusing on in vivo and in vitro laboratory methods of investigation and evaluation and their main problems and difficulties. Basic experimental parameters are summarized and discussed, and recent large studies are also mentioned. For the laboratory experiments, accurate setting and description of dosimetry are essential; therefore, we give recommendations for the technical parameters of the experiments, especially for a well-defined source of radiation by Software Defined Radio.
- Open Access
Indoor Positioning System Based on Fuzzy Logic and WLAN Infrastructure
This paper deals with the issue of mobile device localization in the environment of buildings, which is suitable for use in healthcare or crisis management. The developed localization system is based on wireless Local Area Network (LAN) infrastructure (commonly referred to as Wi-Fi), evaluating signal strength from different access points, using the fingerprinting method for localization. The most serious problems consist in multipath signal propagation and the different sensitivities (calibration) of Wi-Fi adapters installed in different mobile devices. To solve these issues, an algorithm based on fuzzy logic is proposed to optimize the localization performance. The localization system consists of five elements, which are mobile applications for Android OS, a fuzzy derivation model, and a web surveillance environment for displaying the localization results. All of these elements use a database and shared storage on a virtualized server running Ubuntu. The developed system is implemented in Java for Android-based mobile devices and successfully tested. The average accuracy is satisfactory for determining the position of a client device on the level of rooms.
Open AccessIndoor Positioning System Based on Fuzzy Logic and WLAN Infrastructure
This paper deals with the issue of mobile device localization in the environment of buildings, which is suitable for use in healthcare or crisis management. The developed localization system is based on wireless Local Area Network (LAN) infrastructure (commonly referred to as Wi-Fi), evaluating signal strength from different access points, using the fingerprinting method for localization. The most serious problems consist in multipath signal propagation and the different sensitivities (calibration) of Wi-Fi adapters installed in different mobile devices. To solve these issues, an algorithm based on fuzzy logic is proposed to optimize the localization performance. The localization system consists of five elements, which are mobile applications for Android OS, a fuzzy derivation model, and a web surveillance environment for displaying the localization results. All of these elements use a database and shared storage on a virtualized server running Ubuntu. The developed system is implemented in Java for Android-based mobile devices and successfully tested. The average accuracy is satisfactory for determining the position of a client device on the level of rooms.
- Open Access
- 1 August 2019
- Published by Walter de Gruyter GmbH in Journal of Electrical Engineering
- Vol. 70 (4) , 285-294
Experimental load test statistics for the selected IPS tools on low-performance IoT devices
The goal of this paper is to propose a testing procedure for selected intrusion prevention systems (IPS) in a realistic network traffic in terms of their suitability on a given hardware microcomputers for low-performance devices for internet of things (IoT). We perform an IPS research in terms of resource usage in order to establish a universal procedure of checking, whether a given microcomputer controlling IoT devices (often in overloaded state) can additionally burden the installation and start-up of IPS. The experiment is repeated on several boards under overload condition to determine the maximum data rate, above which transmission degrades. The presented testing method is an exemplary tool for IoT applications concerning the security of embedded devices with low performance.
- 1 August 2019
- Published by Walter de Gruyter GmbH in Journal of Electrical Engineering
- Vol. 70 (4) , 285-294
Open AccessExperimental load test statistics for the selected IPS tools on low-performance IoT devices
The goal of this paper is to propose a testing procedure for selected intrusion prevention systems (IPS) in a realistic network traffic in terms of their suitability on a given hardware microcomputers for low-performance devices for internet of things (IoT). We perform an IPS research in terms of resource usage in order to establish a universal procedure of checking, whether a given microcomputer controlling IoT devices (often in overloaded state) can additionally burden the installation and start-up of IPS. The experiment is repeated on several boards under overload condition to determine the maximum data rate, above which transmission degrades. The presented testing method is an exemplary tool for IoT applications concerning the security of embedded devices with low performance.
- 14 March 2019
- Published by Springer Nature
- p. 335-350
Real-Time Localization of Transmission Sources by a Formation of Helicopters Equipped with a Rotating Directional Antenna
- 14 March 2019
- Published by Springer Nature
- p. 335-350
Real-Time Localization of Transmission Sources by a Formation of Helicopters Equipped with a Rotating Directional Antenna